1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * ss.h 4 * 5 * The initial developer of the original code is David A. Hinds 6 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds 7 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. 8 * 9 * (C) 1999 David A. Hinds 10 */ 11 12 #ifndef _LINUX_SS_H 13 #define _LINUX_SS_H 14 15 #include <linux/device.h> 16 #include <linux/sched.h> /* task_struct, completion */ 17 #include <linux/mutex.h> 18 19 #ifdef CONFIG_CARDBUS 20 #include <linux/pci.h> 21 #endif 22 23 /* Definitions for card status flags for GetStatus */ 24 #define SS_WRPROT 0x0001 25 #define SS_CARDLOCK 0x0002 26 #define SS_EJECTION 0x0004 27 #define SS_INSERTION 0x0008 28 #define SS_BATDEAD 0x0010 29 #define SS_BATWARN 0x0020 30 #define SS_READY 0x0040 31 #define SS_DETECT 0x0080 32 #define SS_POWERON 0x0100 33 #define SS_GPI 0x0200 34 #define SS_STSCHG 0x0400 35 #define SS_CARDBUS 0x0800 36 #define SS_3VCARD 0x1000 37 #define SS_XVCARD 0x2000 38 #define SS_PENDING 0x4000 39 #define SS_ZVCARD 0x8000 40 41 /* InquireSocket capabilities */ 42 #define SS_CAP_PAGE_REGS 0x0001 43 #define SS_CAP_VIRTUAL_BUS 0x0002 44 #define SS_CAP_MEM_ALIGN 0x0004 45 #define SS_CAP_STATIC_MAP 0x0008 46 #define SS_CAP_PCCARD 0x4000 47 #define SS_CAP_CARDBUS 0x8000 48 49 /* for GetSocket, SetSocket */ 50 typedef struct socket_state_t { 51 u_int flags; 52 u_int csc_mask; 53 u_char Vcc, Vpp; 54 u_char io_irq; 55 } socket_state_t; 56 57 extern socket_state_t dead_socket; 58 59 /* Socket configuration flags */ 60 #define SS_PWR_AUTO 0x0010 61 #define SS_IOCARD 0x0020 62 #define SS_RESET 0x0040 63 #define SS_DMA_MODE 0x0080 64 #define SS_SPKR_ENA 0x0100 65 #define SS_OUTPUT_ENA 0x0200 66 67 /* Flags for I/O port and memory windows */ 68 #define MAP_ACTIVE 0x01 69 #define MAP_16BIT 0x02 70 #define MAP_AUTOSZ 0x04 71 #define MAP_0WS 0x08 72 #define MAP_WRPROT 0x10 73 #define MAP_ATTRIB 0x20 74 #define MAP_USE_WAIT 0x40 75 #define MAP_PREFETCH 0x80 76 77 /* Use this just for bridge windows */ 78 #define MAP_IOSPACE 0x20 79 80 /* power hook operations */ 81 #define HOOK_POWER_PRE 0x01 82 #define HOOK_POWER_POST 0x02 83 84 typedef struct pccard_io_map { 85 u_char map; 86 u_char flags; 87 u_short speed; 88 phys_addr_t start, stop; 89 } pccard_io_map; 90 91 typedef struct pccard_mem_map { 92 u_char map; 93 u_char flags; 94 u_short speed; 95 phys_addr_t static_start; 96 u_int card_start; 97 struct resource *res; 98 } pccard_mem_map; 99 100 typedef struct io_window_t { 101 u_int InUse, Config; 102 struct resource *res; 103 } io_window_t; 104 105 /* Maximum number of IO windows per socket */ 106 #define MAX_IO_WIN 2 107 108 /* Maximum number of memory windows per socket */ 109 #define MAX_WIN 4 110 111 112 /* 113 * Socket operations. 114 */ 115 struct pcmcia_socket; 116 struct pccard_resource_ops; 117 struct config_t; 118 struct pcmcia_callback; 119 struct user_info_t; 120 121 struct pccard_operations { 122 int (*init)(struct pcmcia_socket *s); 123 int (*suspend)(struct pcmcia_socket *s); 124 int (*get_status)(struct pcmcia_socket *s, u_int *value); 125 int (*set_socket)(struct pcmcia_socket *s, socket_state_t *state); 126 int (*set_io_map)(struct pcmcia_socket *s, struct pccard_io_map *io); 127 int (*set_mem_map)(struct pcmcia_socket *s, struct pccard_mem_map *mem); 128 }; 129 130 struct pcmcia_socket { 131 struct module *owner; 132 socket_state_t socket; 133 u_int state; 134 u_int suspended_state; /* state before suspend */ 135 u_short functions; 136 u_short lock_count; 137 pccard_mem_map cis_mem; 138 void __iomem *cis_virt; 139 io_window_t io[MAX_IO_WIN]; 140 pccard_mem_map win[MAX_WIN]; 141 struct list_head cis_cache; 142 size_t fake_cis_len; 143 u8 *fake_cis; 144 145 struct list_head socket_list; 146 struct completion socket_released; 147 148 /* deprecated */ 149 unsigned int sock; /* socket number */ 150 151 152 /* socket capabilities */ 153 u_int features; 154 u_int irq_mask; 155 u_int map_size; 156 u_int io_offset; 157 u_int pci_irq; 158 struct pci_dev *cb_dev; 159 160 /* socket setup is done so resources should be able to be allocated. 161 * Only if set to 1, calls to find_{io,mem}_region are handled, and 162 * insertio events are actually managed by the PCMCIA layer.*/ 163 u8 resource_setup_done; 164 165 /* socket operations */ 166 struct pccard_operations *ops; 167 struct pccard_resource_ops *resource_ops; 168 void *resource_data; 169 170 /* Zoom video behaviour is so chip specific its not worth adding 171 this to _ops */ 172 void (*zoom_video)(struct pcmcia_socket *, 173 int); 174 175 /* so is power hook */ 176 int (*power_hook)(struct pcmcia_socket *sock, int operation); 177 178 /* allows tuning the CB bridge before loading driver for the CB card */ 179 #ifdef CONFIG_CARDBUS 180 void (*tune_bridge)(struct pcmcia_socket *sock, struct pci_bus *bus); 181 #endif 182 183 /* state thread */ 184 struct task_struct *thread; 185 struct completion thread_done; 186 unsigned int thread_events; 187 unsigned int sysfs_events; 188 189 /* For the non-trivial interaction between these locks, 190 * see Documentation/pcmcia/locking.txt */ 191 struct mutex skt_mutex; 192 struct mutex ops_mutex; 193 194 /* protects thread_events and sysfs_events */ 195 spinlock_t thread_lock; 196 197 /* pcmcia (16-bit) */ 198 struct pcmcia_callback *callback; 199 200 #if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) 201 /* The following elements refer to 16-bit PCMCIA devices inserted 202 * into the socket */ 203 struct list_head devices_list; 204 205 /* the number of devices, used only internally and subject to 206 * incorrectness and change */ 207 u8 device_count; 208 209 /* does the PCMCIA card consist of two pseudo devices? */ 210 u8 pcmcia_pfc; 211 212 /* non-zero if PCMCIA card is present */ 213 atomic_t present; 214 215 /* IRQ to be used by PCMCIA devices. May not be IRQ 0. */ 216 unsigned int pcmcia_irq; 217 218 #endif /* CONFIG_PCMCIA */ 219 220 /* socket device */ 221 struct device dev; 222 /* data internal to the socket driver */ 223 void *driver_data; 224 /* status of the card during resume from a system sleep state */ 225 int resume_status; 226 }; 227 228 229 /* socket drivers must define the resource operations type they use. There 230 * are three options: 231 * - pccard_static_ops iomem and ioport areas are assigned statically 232 * - pccard_iodyn_ops iomem areas is assigned statically, ioport 233 * areas dynamically 234 * If this option is selected, use 235 * "select PCCARD_IODYN" in Kconfig. 236 * - pccard_nonstatic_ops iomem and ioport areas are assigned dynamically. 237 * If this option is selected, use 238 * "select PCCARD_NONSTATIC" in Kconfig. 239 * 240 */ 241 extern struct pccard_resource_ops pccard_static_ops; 242 #if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE) 243 extern struct pccard_resource_ops pccard_iodyn_ops; 244 extern struct pccard_resource_ops pccard_nonstatic_ops; 245 #else 246 /* If PCMCIA is not used, but only CARDBUS, these functions are not used 247 * at all. Therefore, do not use the large (240K!) rsrc_nonstatic module 248 */ 249 #define pccard_iodyn_ops pccard_static_ops 250 #define pccard_nonstatic_ops pccard_static_ops 251 #endif 252 253 254 /* socket drivers use this callback in their IRQ handler */ 255 extern void pcmcia_parse_events(struct pcmcia_socket *socket, 256 unsigned int events); 257 258 /* to register and unregister a socket */ 259 extern int pcmcia_register_socket(struct pcmcia_socket *socket); 260 extern void pcmcia_unregister_socket(struct pcmcia_socket *socket); 261 262 263 #endif /* _LINUX_SS_H */ 264