xref: /openbmc/linux/include/net/sctp/constants.h (revision 4b4f3acc)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /* SCTP kernel implementation
3  * (C) Copyright IBM Corp. 2001, 2004
4  * Copyright (c) 1999-2000 Cisco, Inc.
5  * Copyright (c) 1999-2001 Motorola, Inc.
6  * Copyright (c) 2001 Intel Corp.
7  *
8  * This file is part of the SCTP kernel implementation
9  *
10  * Please send any bug reports or fixes you make to the
11  * email address(es):
12  *    lksctp developers <linux-sctp@vger.kernel.org>
13  *
14  * Written or modified by:
15  *   La Monte H.P. Yarroll <piggy@acm.org>
16  *   Karl Knutson          <karl@athena.chicago.il.us>
17  *   Randall Stewart       <randall@stewart.chicago.il.us>
18  *   Ken Morneau           <kmorneau@cisco.com>
19  *   Qiaobing Xie          <qxie1@motorola.com>
20  *   Xingang Guo           <xingang.guo@intel.com>
21  *   Sridhar Samudrala     <samudrala@us.ibm.com>
22  *   Daisy Chang           <daisyc@us.ibm.com>
23  */
24 
25 #ifndef __sctp_constants_h__
26 #define __sctp_constants_h__
27 
28 #include <linux/sctp.h>
29 #include <linux/ipv6.h> /* For ipv6hdr. */
30 #include <net/tcp_states.h>  /* For TCP states used in enum sctp_sock_state */
31 
32 /* Value used for stream negotiation. */
33 enum { SCTP_MAX_STREAM = 0xffff };
34 enum { SCTP_DEFAULT_OUTSTREAMS = 10 };
35 enum { SCTP_DEFAULT_INSTREAMS = SCTP_MAX_STREAM };
36 
37 /* Since CIDs are sparse, we need all four of the following
38  * symbols.  CIDs are dense through SCTP_CID_BASE_MAX.
39  */
40 #define SCTP_CID_BASE_MAX		SCTP_CID_SHUTDOWN_COMPLETE
41 
42 #define SCTP_NUM_BASE_CHUNK_TYPES	(SCTP_CID_BASE_MAX + 1)
43 
44 #define SCTP_NUM_ADDIP_CHUNK_TYPES	2
45 
46 #define SCTP_NUM_PRSCTP_CHUNK_TYPES	1
47 
48 #define SCTP_NUM_RECONF_CHUNK_TYPES	1
49 
50 #define SCTP_NUM_AUTH_CHUNK_TYPES	1
51 
52 #define SCTP_NUM_CHUNK_TYPES		(SCTP_NUM_BASE_CHUNK_TYPES + \
53 					 SCTP_NUM_ADDIP_CHUNK_TYPES +\
54 					 SCTP_NUM_PRSCTP_CHUNK_TYPES +\
55 					 SCTP_NUM_RECONF_CHUNK_TYPES +\
56 					 SCTP_NUM_AUTH_CHUNK_TYPES)
57 
58 /* These are the different flavours of event.  */
59 enum sctp_event_type {
60 	SCTP_EVENT_T_CHUNK = 1,
61 	SCTP_EVENT_T_TIMEOUT,
62 	SCTP_EVENT_T_OTHER,
63 	SCTP_EVENT_T_PRIMITIVE
64 };
65 
66 /* As a convenience for the state machine, we append SCTP_EVENT_* and
67  * SCTP_ULP_* to the list of possible chunks.
68  */
69 
70 enum sctp_event_timeout {
71 	SCTP_EVENT_TIMEOUT_NONE = 0,
72 	SCTP_EVENT_TIMEOUT_T1_COOKIE,
73 	SCTP_EVENT_TIMEOUT_T1_INIT,
74 	SCTP_EVENT_TIMEOUT_T2_SHUTDOWN,
75 	SCTP_EVENT_TIMEOUT_T3_RTX,
76 	SCTP_EVENT_TIMEOUT_T4_RTO,
77 	SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD,
78 	SCTP_EVENT_TIMEOUT_HEARTBEAT,
79 	SCTP_EVENT_TIMEOUT_RECONF,
80 	SCTP_EVENT_TIMEOUT_SACK,
81 	SCTP_EVENT_TIMEOUT_AUTOCLOSE,
82 };
83 
84 #define SCTP_EVENT_TIMEOUT_MAX		SCTP_EVENT_TIMEOUT_AUTOCLOSE
85 #define SCTP_NUM_TIMEOUT_TYPES		(SCTP_EVENT_TIMEOUT_MAX + 1)
86 
87 enum sctp_event_other {
88 	SCTP_EVENT_NO_PENDING_TSN = 0,
89 	SCTP_EVENT_ICMP_PROTO_UNREACH,
90 };
91 
92 #define SCTP_EVENT_OTHER_MAX		SCTP_EVENT_ICMP_PROTO_UNREACH
93 #define SCTP_NUM_OTHER_TYPES		(SCTP_EVENT_OTHER_MAX + 1)
94 
95 /* These are primitive requests from the ULP.  */
96 enum sctp_event_primitive {
97 	SCTP_PRIMITIVE_ASSOCIATE = 0,
98 	SCTP_PRIMITIVE_SHUTDOWN,
99 	SCTP_PRIMITIVE_ABORT,
100 	SCTP_PRIMITIVE_SEND,
101 	SCTP_PRIMITIVE_REQUESTHEARTBEAT,
102 	SCTP_PRIMITIVE_ASCONF,
103 	SCTP_PRIMITIVE_RECONF,
104 };
105 
106 #define SCTP_EVENT_PRIMITIVE_MAX	SCTP_PRIMITIVE_RECONF
107 #define SCTP_NUM_PRIMITIVE_TYPES	(SCTP_EVENT_PRIMITIVE_MAX + 1)
108 
109 /* We define here a utility type for manipulating subtypes.
110  * The subtype constructors all work like this:
111  *
112  *   union sctp_subtype foo = SCTP_ST_CHUNK(SCTP_CID_INIT);
113  */
114 
115 union sctp_subtype {
116 	enum sctp_cid chunk;
117 	enum sctp_event_timeout timeout;
118 	enum sctp_event_other other;
119 	enum sctp_event_primitive primitive;
120 };
121 
122 #define SCTP_SUBTYPE_CONSTRUCTOR(_name, _type, _elt) \
123 static inline union sctp_subtype	\
124 SCTP_ST_## _name (_type _arg)		\
125 { union sctp_subtype _retval; _retval._elt = _arg; return _retval; }
126 
127 SCTP_SUBTYPE_CONSTRUCTOR(CHUNK,		enum sctp_cid,		chunk)
128 SCTP_SUBTYPE_CONSTRUCTOR(TIMEOUT,	enum sctp_event_timeout, timeout)
129 SCTP_SUBTYPE_CONSTRUCTOR(OTHER,		enum sctp_event_other,	other)
130 SCTP_SUBTYPE_CONSTRUCTOR(PRIMITIVE,	enum sctp_event_primitive, primitive)
131 
132 
133 #define sctp_chunk_is_data(a) (a->chunk_hdr->type == SCTP_CID_DATA || \
134 			       a->chunk_hdr->type == SCTP_CID_I_DATA)
135 
136 /* Internal error codes */
137 enum sctp_ierror {
138 	SCTP_IERROR_NO_ERROR	        = 0,
139 	SCTP_IERROR_BASE		= 1000,
140 	SCTP_IERROR_NO_COOKIE,
141 	SCTP_IERROR_BAD_SIG,
142 	SCTP_IERROR_STALE_COOKIE,
143 	SCTP_IERROR_NOMEM,
144 	SCTP_IERROR_MALFORMED,
145 	SCTP_IERROR_BAD_TAG,
146 	SCTP_IERROR_BIG_GAP,
147 	SCTP_IERROR_DUP_TSN,
148 	SCTP_IERROR_HIGH_TSN,
149 	SCTP_IERROR_IGNORE_TSN,
150 	SCTP_IERROR_NO_DATA,
151 	SCTP_IERROR_BAD_STREAM,
152 	SCTP_IERROR_BAD_PORTS,
153 	SCTP_IERROR_AUTH_BAD_HMAC,
154 	SCTP_IERROR_AUTH_BAD_KEYID,
155 	SCTP_IERROR_PROTO_VIOLATION,
156 	SCTP_IERROR_ERROR,
157 	SCTP_IERROR_ABORT,
158 };
159 
160 
161 
162 /* SCTP state defines for internal state machine */
163 enum sctp_state {
164 
165 	SCTP_STATE_CLOSED		= 0,
166 	SCTP_STATE_COOKIE_WAIT		= 1,
167 	SCTP_STATE_COOKIE_ECHOED	= 2,
168 	SCTP_STATE_ESTABLISHED		= 3,
169 	SCTP_STATE_SHUTDOWN_PENDING	= 4,
170 	SCTP_STATE_SHUTDOWN_SENT	= 5,
171 	SCTP_STATE_SHUTDOWN_RECEIVED	= 6,
172 	SCTP_STATE_SHUTDOWN_ACK_SENT	= 7,
173 
174 };
175 
176 #define SCTP_STATE_MAX			SCTP_STATE_SHUTDOWN_ACK_SENT
177 #define SCTP_STATE_NUM_STATES		(SCTP_STATE_MAX + 1)
178 
179 /* These are values for sk->state.
180  * For a UDP-style SCTP socket, the states are defined as follows
181  * - A socket in SCTP_SS_CLOSED state indicates that it is not willing to
182  *   accept new associations, but it can initiate the creation of new ones.
183  * - A socket in SCTP_SS_LISTENING state indicates that it is willing to
184  *   accept new  associations and can initiate the creation of new ones.
185  * - A socket in SCTP_SS_ESTABLISHED state indicates that it is a peeled off
186  *   socket with one association.
187  * For a TCP-style SCTP socket, the states are defined as follows
188  * - A socket in SCTP_SS_CLOSED state indicates that it is not willing to
189  *   accept new associations, but it can initiate the creation of new ones.
190  * - A socket in SCTP_SS_LISTENING state indicates that it is willing to
191  *   accept new associations, but cannot initiate the creation of new ones.
192  * - A socket in SCTP_SS_ESTABLISHED state indicates that it has a single
193  *   association.
194  */
195 enum sctp_sock_state {
196 	SCTP_SS_CLOSED         = TCP_CLOSE,
197 	SCTP_SS_LISTENING      = TCP_LISTEN,
198 	SCTP_SS_ESTABLISHING   = TCP_SYN_SENT,
199 	SCTP_SS_ESTABLISHED    = TCP_ESTABLISHED,
200 	SCTP_SS_CLOSING        = TCP_CLOSE_WAIT,
201 };
202 
203 /* These functions map various type to printable names.  */
204 const char *sctp_cname(const union sctp_subtype id);	/* chunk types */
205 const char *sctp_oname(const union sctp_subtype id);	/* other events */
206 const char *sctp_tname(const union sctp_subtype id);	/* timeouts */
207 const char *sctp_pname(const union sctp_subtype id);	/* primitives */
208 
209 /* This is a table of printable names of sctp_state_t's.  */
210 extern const char *const sctp_state_tbl[];
211 extern const char *const sctp_evttype_tbl[];
212 extern const char *const sctp_status_tbl[];
213 
214 /* Maximum chunk length considering padding requirements. */
215 enum { SCTP_MAX_CHUNK_LEN = ((1<<16) - sizeof(__u32)) };
216 
217 /* Encourage Cookie-Echo bundling by pre-fragmenting chunks a little
218  * harder (until reaching ESTABLISHED state).
219  */
220 enum { SCTP_ARBITRARY_COOKIE_ECHO_LEN = 200 };
221 
222 /* Guess at how big to make the TSN mapping array.
223  * We guarantee that we can handle at least this big a gap between the
224  * cumulative ACK and the highest TSN.  In practice, we can often
225  * handle up to twice this value.
226  *
227  * NEVER make this more than 32767 (2^15-1).  The Gap Ack Blocks in a
228  * SACK (see  section 3.3.4) are only 16 bits, so 2*SCTP_TSN_MAP_SIZE
229  * must be less than 65535 (2^16 - 1), or we will have overflow
230  * problems creating SACK's.
231  */
232 #define SCTP_TSN_MAP_INITIAL BITS_PER_LONG
233 #define SCTP_TSN_MAP_INCREMENT SCTP_TSN_MAP_INITIAL
234 #define SCTP_TSN_MAP_SIZE 4096
235 
236 /* We will not record more than this many duplicate TSNs between two
237  * SACKs.  The minimum PMTU is 512.  Remove all the headers and there
238  * is enough room for 117 duplicate reports.  Round down to the
239  * nearest power of 2.
240  */
241 enum { SCTP_MAX_DUP_TSNS = 16 };
242 enum { SCTP_MAX_GABS = 16 };
243 
244 /* Heartbeat interval - 30 secs */
245 #define SCTP_DEFAULT_TIMEOUT_HEARTBEAT	(30*1000)
246 
247 /* Delayed sack timer - 200ms */
248 #define SCTP_DEFAULT_TIMEOUT_SACK	(200)
249 
250 /* RTO.Initial              - 3  seconds
251  * RTO.Min                  - 1  second
252  * RTO.Max                  - 60 seconds
253  * RTO.Alpha                - 1/8
254  * RTO.Beta                 - 1/4
255  */
256 #define SCTP_RTO_INITIAL	(3 * 1000)
257 #define SCTP_RTO_MIN		(1 * 1000)
258 #define SCTP_RTO_MAX		(60 * 1000)
259 
260 #define SCTP_RTO_ALPHA          3   /* 1/8 when converted to right shifts. */
261 #define SCTP_RTO_BETA           2   /* 1/4 when converted to right shifts. */
262 
263 /* Maximum number of new data packets that can be sent in a burst.  */
264 #define SCTP_DEFAULT_MAX_BURST		4
265 
266 #define SCTP_CLOCK_GRANULARITY	1	/* 1 jiffy */
267 
268 #define SCTP_DEFAULT_COOKIE_LIFE	(60 * 1000) /* 60 seconds */
269 
270 #define SCTP_DEFAULT_MINWINDOW	1500	/* default minimum rwnd size */
271 #define SCTP_DEFAULT_MAXWINDOW	65535	/* default rwnd size */
272 #define SCTP_DEFAULT_RWND_SHIFT  4	/* by default, update on 1/16 of
273 					 * rcvbuf, which is 1/8 of initial
274 					 * window
275 					 */
276 #define SCTP_DEFAULT_MAXSEGMENT 1500	/* MTU size, this is the limit
277                                          * to which we will raise the P-MTU.
278 					 */
279 #define SCTP_DEFAULT_MINSEGMENT 512	/* MTU size ... if no mtu disc */
280 
281 #define SCTP_SECRET_SIZE 32		/* Number of octets in a 256 bits. */
282 
283 #define SCTP_SIGNATURE_SIZE 20	        /* size of a SLA-1 signature */
284 
285 #define SCTP_COOKIE_MULTIPLE 32 /* Pad out our cookie to make our hash
286 				 * functions simpler to write.
287 				 */
288 
289 /* These return values describe the success or failure of a number of
290  * routines which form the lower interface to SCTP_outqueue.
291  */
292 enum sctp_xmit {
293 	SCTP_XMIT_OK,
294 	SCTP_XMIT_PMTU_FULL,
295 	SCTP_XMIT_RWND_FULL,
296 	SCTP_XMIT_DELAY,
297 };
298 
299 /* These are the commands for manipulating transports.  */
300 enum sctp_transport_cmd {
301 	SCTP_TRANSPORT_UP,
302 	SCTP_TRANSPORT_DOWN,
303 	SCTP_TRANSPORT_PF,
304 };
305 
306 /* These are the address scopes defined mainly for IPv4 addresses
307  * based on draft of SCTP IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>.
308  * These scopes are hopefully generic enough to be used on scoping both
309  * IPv4 and IPv6 addresses in SCTP.
310  * At this point, the IPv6 scopes will be mapped to these internal scopes
311  * as much as possible.
312  */
313 enum sctp_scope {
314 	SCTP_SCOPE_GLOBAL,		/* IPv4 global addresses */
315 	SCTP_SCOPE_PRIVATE,		/* IPv4 private addresses */
316 	SCTP_SCOPE_LINK,		/* IPv4 link local address */
317 	SCTP_SCOPE_LOOPBACK,		/* IPv4 loopback address */
318 	SCTP_SCOPE_UNUSABLE,		/* IPv4 unusable addresses */
319 };
320 
321 enum {
322 	SCTP_SCOPE_POLICY_DISABLE,	/* Disable IPv4 address scoping */
323 	SCTP_SCOPE_POLICY_ENABLE,	/* Enable IPv4 address scoping */
324 	SCTP_SCOPE_POLICY_PRIVATE,	/* Follow draft but allow IPv4 private addresses */
325 	SCTP_SCOPE_POLICY_LINK,		/* Follow draft but allow IPv4 link local addresses */
326 };
327 
328 #define SCTP_SCOPE_POLICY_MAX	SCTP_SCOPE_POLICY_LINK
329 
330 /* Based on IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>,
331  * SCTP IPv4 unusable addresses: 0.0.0.0/8, 224.0.0.0/4, 198.18.0.0/24,
332  * 192.88.99.0/24.
333  * Also, RFC 8.4, non-unicast addresses are not considered valid SCTP
334  * addresses.
335  */
336 #define IS_IPV4_UNUSABLE_ADDRESS(a)	    \
337 	((htonl(INADDR_BROADCAST) == a) ||  \
338 	 ipv4_is_multicast(a) ||	    \
339 	 ipv4_is_zeronet(a) ||		    \
340 	 ipv4_is_test_198(a) ||		    \
341 	 ipv4_is_anycast_6to4(a))
342 
343 /* Flags used for the bind address copy functions.  */
344 #define SCTP_ADDR6_ALLOWED	0x00000001	/* IPv6 address is allowed by
345 						   local sock family */
346 #define SCTP_ADDR4_PEERSUPP	0x00000002	/* IPv4 address is supported by
347 						   peer */
348 #define SCTP_ADDR6_PEERSUPP	0x00000004	/* IPv6 address is supported by
349 						   peer */
350 
351 /* Reasons to retransmit. */
352 enum sctp_retransmit_reason {
353 	SCTP_RTXR_T3_RTX,
354 	SCTP_RTXR_FAST_RTX,
355 	SCTP_RTXR_PMTUD,
356 	SCTP_RTXR_T1_RTX,
357 };
358 
359 /* Reasons to lower cwnd. */
360 enum sctp_lower_cwnd {
361 	SCTP_LOWER_CWND_T3_RTX,
362 	SCTP_LOWER_CWND_FAST_RTX,
363 	SCTP_LOWER_CWND_ECNE,
364 	SCTP_LOWER_CWND_INACTIVE,
365 };
366 
367 
368 /* SCTP-AUTH Necessary constants */
369 
370 /* SCTP-AUTH, Section 3.3
371  *
372  *  The following Table 2 shows the currently defined values for HMAC
373  *  identifiers.
374  *
375  *  +-----------------+--------------------------+
376  *  | HMAC Identifier | Message Digest Algorithm |
377  *  +-----------------+--------------------------+
378  *  | 0               | Reserved                 |
379  *  | 1               | SHA-1 defined in [8]     |
380  *  | 2               | Reserved                 |
381  *  | 3               | SHA-256 defined in [8]   |
382  *  +-----------------+--------------------------+
383  */
384 enum {
385 	SCTP_AUTH_HMAC_ID_RESERVED_0,
386 	SCTP_AUTH_HMAC_ID_SHA1,
387 	SCTP_AUTH_HMAC_ID_RESERVED_2,
388 #if defined (CONFIG_CRYPTO_SHA256) || defined (CONFIG_CRYPTO_SHA256_MODULE)
389 	SCTP_AUTH_HMAC_ID_SHA256,
390 #endif
391 	__SCTP_AUTH_HMAC_MAX
392 };
393 
394 #define SCTP_AUTH_HMAC_ID_MAX	__SCTP_AUTH_HMAC_MAX - 1
395 #define SCTP_AUTH_NUM_HMACS 	__SCTP_AUTH_HMAC_MAX
396 #define SCTP_SHA1_SIG_SIZE 20
397 #define SCTP_SHA256_SIG_SIZE 32
398 
399 /*  SCTP-AUTH, Section 3.2
400  *     The chunk types for INIT, INIT-ACK, SHUTDOWN-COMPLETE and AUTH chunks
401  *     MUST NOT be listed in the CHUNKS parameter
402  */
403 #define SCTP_NUM_NOAUTH_CHUNKS	4
404 #define SCTP_AUTH_MAX_CHUNKS	(SCTP_NUM_CHUNK_TYPES - SCTP_NUM_NOAUTH_CHUNKS)
405 
406 /* SCTP-AUTH Section 6.1
407  * The RANDOM parameter MUST contain a 32 byte random number.
408  */
409 #define SCTP_AUTH_RANDOM_LENGTH 32
410 
411 #endif /* __sctp_constants_h__ */
412