1 #ifndef __NET_REGULATORY_H 2 #define __NET_REGULATORY_H 3 /* 4 * regulatory support structures 5 * 6 * Copyright 2008-2009 Luis R. Rodriguez <mcgrof@qca.qualcomm.com> 7 * Copyright (C) 2018 Intel Corporation 8 * 9 * Permission to use, copy, modify, and/or distribute this software for any 10 * purpose with or without fee is hereby granted, provided that the above 11 * copyright notice and this permission notice appear in all copies. 12 * 13 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 14 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 15 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 16 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 17 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 18 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 19 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 20 */ 21 22 #include <linux/rcupdate.h> 23 24 /** 25 * enum environment_cap - Environment parsed from country IE 26 * @ENVIRON_ANY: indicates country IE applies to both indoor and 27 * outdoor operation. 28 * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation 29 * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation 30 */ 31 enum environment_cap { 32 ENVIRON_ANY, 33 ENVIRON_INDOOR, 34 ENVIRON_OUTDOOR, 35 }; 36 37 /** 38 * struct regulatory_request - used to keep track of regulatory requests 39 * 40 * @rcu_head: RCU head struct used to free the request 41 * @wiphy_idx: this is set if this request's initiator is 42 * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This 43 * can be used by the wireless core to deal with conflicts 44 * and potentially inform users of which devices specifically 45 * cased the conflicts. 46 * @initiator: indicates who sent this request, could be any of 47 * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) 48 * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested 49 * regulatory domain. We have a few special codes: 50 * 00 - World regulatory domain 51 * 99 - built by driver but a specific alpha2 cannot be determined 52 * 98 - result of an intersection between two regulatory domains 53 * 97 - regulatory domain has not yet been configured 54 * @dfs_region: If CRDA responded with a regulatory domain that requires 55 * DFS master operation on a known DFS region (NL80211_DFS_*), 56 * dfs_region represents that region. Drivers can use this and the 57 * @alpha2 to adjust their device's DFS parameters as required. 58 * @user_reg_hint_type: if the @initiator was of type 59 * %NL80211_REGDOM_SET_BY_USER, this classifies the type 60 * of hint passed. This could be any of the %NL80211_USER_REG_HINT_* 61 * types. 62 * @intersect: indicates whether the wireless core should intersect 63 * the requested regulatory domain with the presently set regulatory 64 * domain. 65 * @processed: indicates whether or not this requests has already been 66 * processed. When the last request is processed it means that the 67 * currently regulatory domain set on cfg80211 is updated from 68 * CRDA and can be used by other regulatory requests. When a 69 * the last request is not yet processed we must yield until it 70 * is processed before processing any new requests. 71 * @country_ie_checksum: checksum of the last processed and accepted 72 * country IE 73 * @country_ie_env: lets us know if the AP is telling us we are outdoor, 74 * indoor, or if it doesn't matter 75 * @list: used to insert into the reg_requests_list linked list 76 */ 77 struct regulatory_request { 78 struct rcu_head rcu_head; 79 int wiphy_idx; 80 enum nl80211_reg_initiator initiator; 81 enum nl80211_user_reg_hint_type user_reg_hint_type; 82 char alpha2[3]; 83 enum nl80211_dfs_regions dfs_region; 84 bool intersect; 85 bool processed; 86 enum environment_cap country_ie_env; 87 struct list_head list; 88 }; 89 90 /** 91 * enum ieee80211_regulatory_flags - device regulatory flags 92 * 93 * @REGULATORY_CUSTOM_REG: tells us the driver for this device 94 * has its own custom regulatory domain and cannot identify the 95 * ISO / IEC 3166 alpha2 it belongs to. When this is enabled 96 * we will disregard the first regulatory hint (when the 97 * initiator is %REGDOM_SET_BY_CORE). Drivers that use 98 * wiphy_apply_custom_regulatory() should have this flag set 99 * or the regulatory core will set it for the wiphy. 100 * If you use regulatory_hint() *after* using 101 * wiphy_apply_custom_regulatory() the wireless core will 102 * clear the REGULATORY_CUSTOM_REG for your wiphy as it would be 103 * implied that the device somehow gained knowledge of its region. 104 * @REGULATORY_STRICT_REG: tells us that the wiphy for this device 105 * has regulatory domain that it wishes to be considered as the 106 * superset for regulatory rules. After this device gets its regulatory 107 * domain programmed further regulatory hints shall only be considered 108 * for this device to enhance regulatory compliance, forcing the 109 * device to only possibly use subsets of the original regulatory 110 * rules. For example if channel 13 and 14 are disabled by this 111 * device's regulatory domain no user specified regulatory hint which 112 * has these channels enabled would enable them for this wiphy, 113 * the device's original regulatory domain will be trusted as the 114 * base. You can program the superset of regulatory rules for this 115 * wiphy with regulatory_hint() for cards programmed with an 116 * ISO3166-alpha2 country code. wiphys that use regulatory_hint() 117 * will have their wiphy->regd programmed once the regulatory 118 * domain is set, and all other regulatory hints will be ignored 119 * until their own regulatory domain gets programmed. 120 * @REGULATORY_DISABLE_BEACON_HINTS: enable this if your driver needs to 121 * ensure that passive scan flags and beaconing flags may not be lifted by 122 * cfg80211 due to regulatory beacon hints. For more information on beacon 123 * hints read the documenation for regulatory_hint_found_beacon() 124 * @REGULATORY_COUNTRY_IE_FOLLOW_POWER: for devices that have a preference 125 * that even though they may have programmed their own custom power 126 * setting prior to wiphy registration, they want to ensure their channel 127 * power settings are updated for this connection with the power settings 128 * derived from the regulatory domain. The regulatory domain used will be 129 * based on the ISO3166-alpha2 from country IE provided through 130 * regulatory_hint_country_ie() 131 * @REGULATORY_COUNTRY_IE_IGNORE: for devices that have a preference to ignore 132 * all country IE information processed by the regulatory core. This will 133 * override %REGULATORY_COUNTRY_IE_FOLLOW_POWER as all country IEs will 134 * be ignored. 135 * @REGULATORY_ENABLE_RELAX_NO_IR: for devices that wish to allow the 136 * NO_IR relaxation, which enables transmissions on channels on which 137 * otherwise initiating radiation is not allowed. This will enable the 138 * relaxations enabled under the CFG80211_REG_RELAX_NO_IR configuration 139 * option 140 * @REGULATORY_IGNORE_STALE_KICKOFF: the regulatory core will _not_ make sure 141 * all interfaces on this wiphy reside on allowed channels. If this flag 142 * is not set, upon a regdomain change, the interfaces are given a grace 143 * period (currently 60 seconds) to disconnect or move to an allowed 144 * channel. Interfaces on forbidden channels are forcibly disconnected. 145 * Currently these types of interfaces are supported for enforcement: 146 * NL80211_IFTYPE_ADHOC, NL80211_IFTYPE_STATION, NL80211_IFTYPE_AP, 147 * NL80211_IFTYPE_AP_VLAN, NL80211_IFTYPE_MONITOR, 148 * NL80211_IFTYPE_P2P_CLIENT, NL80211_IFTYPE_P2P_GO, 149 * NL80211_IFTYPE_P2P_DEVICE. The flag will be set by default if a device 150 * includes any modes unsupported for enforcement checking. 151 * @REGULATORY_WIPHY_SELF_MANAGED: for devices that employ wiphy-specific 152 * regdom management. These devices will ignore all regdom changes not 153 * originating from their own wiphy. 154 * A self-managed wiphys only employs regulatory information obtained from 155 * the FW and driver and does not use other cfg80211 sources like 156 * beacon-hints, country-code IEs and hints from other devices on the same 157 * system. Conversely, a self-managed wiphy does not share its regulatory 158 * hints with other devices in the system. If a system contains several 159 * devices, one or more of which are self-managed, there might be 160 * contradictory regulatory settings between them. Usage of flag is 161 * generally discouraged. Only use it if the FW/driver is incompatible 162 * with non-locally originated hints. 163 * This flag is incompatible with the flags: %REGULATORY_CUSTOM_REG, 164 * %REGULATORY_STRICT_REG, %REGULATORY_COUNTRY_IE_FOLLOW_POWER, 165 * %REGULATORY_COUNTRY_IE_IGNORE and %REGULATORY_DISABLE_BEACON_HINTS. 166 * Mixing any of the above flags with this flag will result in a failure 167 * to register the wiphy. This flag implies 168 * %REGULATORY_DISABLE_BEACON_HINTS and %REGULATORY_COUNTRY_IE_IGNORE. 169 */ 170 enum ieee80211_regulatory_flags { 171 REGULATORY_CUSTOM_REG = BIT(0), 172 REGULATORY_STRICT_REG = BIT(1), 173 REGULATORY_DISABLE_BEACON_HINTS = BIT(2), 174 REGULATORY_COUNTRY_IE_FOLLOW_POWER = BIT(3), 175 REGULATORY_COUNTRY_IE_IGNORE = BIT(4), 176 REGULATORY_ENABLE_RELAX_NO_IR = BIT(5), 177 REGULATORY_IGNORE_STALE_KICKOFF = BIT(6), 178 REGULATORY_WIPHY_SELF_MANAGED = BIT(7), 179 }; 180 181 struct ieee80211_freq_range { 182 u32 start_freq_khz; 183 u32 end_freq_khz; 184 u32 max_bandwidth_khz; 185 }; 186 187 struct ieee80211_power_rule { 188 u32 max_antenna_gain; 189 u32 max_eirp; 190 }; 191 192 /** 193 * struct ieee80211_wmm_ac - used to store per ac wmm regulatory limitation 194 * 195 * The information provided in this structure is required for QoS 196 * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29. 197 * 198 * @cw_min: minimum contention window [a value of the form 199 * 2^n-1 in the range 1..32767] 200 * @cw_max: maximum contention window [like @cw_min] 201 * @cot: maximum burst time in units of 32 usecs, 0 meaning disabled 202 * @aifsn: arbitration interframe space [0..255] 203 * 204 */ 205 struct ieee80211_wmm_ac { 206 u16 cw_min; 207 u16 cw_max; 208 u16 cot; 209 u8 aifsn; 210 }; 211 212 struct ieee80211_wmm_rule { 213 struct ieee80211_wmm_ac client[IEEE80211_NUM_ACS]; 214 struct ieee80211_wmm_ac ap[IEEE80211_NUM_ACS]; 215 }; 216 217 struct ieee80211_reg_rule { 218 struct ieee80211_freq_range freq_range; 219 struct ieee80211_power_rule power_rule; 220 struct ieee80211_wmm_rule wmm_rule; 221 u32 flags; 222 u32 dfs_cac_ms; 223 bool has_wmm; 224 }; 225 226 struct ieee80211_regdomain { 227 struct rcu_head rcu_head; 228 u32 n_reg_rules; 229 char alpha2[3]; 230 enum nl80211_dfs_regions dfs_region; 231 struct ieee80211_reg_rule reg_rules[]; 232 }; 233 234 #define REG_RULE_EXT(start, end, bw, gain, eirp, dfs_cac, reg_flags) \ 235 { \ 236 .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \ 237 .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \ 238 .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \ 239 .power_rule.max_antenna_gain = DBI_TO_MBI(gain), \ 240 .power_rule.max_eirp = DBM_TO_MBM(eirp), \ 241 .flags = reg_flags, \ 242 .dfs_cac_ms = dfs_cac, \ 243 } 244 245 #define REG_RULE(start, end, bw, gain, eirp, reg_flags) \ 246 REG_RULE_EXT(start, end, bw, gain, eirp, 0, reg_flags) 247 248 #endif 249