1 /* 2 * IEEE802.15.4-2003 specification 3 * 4 * Copyright (C) 2007-2012 Siemens AG 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 8 * as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 */ 16 #ifndef NET_MAC802154_H 17 #define NET_MAC802154_H 18 19 #include <net/af_ieee802154.h> 20 #include <linux/ieee802154.h> 21 #include <linux/skbuff.h> 22 #include <linux/unaligned/memmove.h> 23 24 #include <net/cfg802154.h> 25 26 /* General MAC frame format: 27 * 2 bytes: Frame Control 28 * 1 byte: Sequence Number 29 * 20 bytes: Addressing fields 30 * 14 bytes: Auxiliary Security Header 31 */ 32 #define MAC802154_FRAME_HARD_HEADER_LEN (2 + 1 + 20 + 14) 33 34 /** 35 * enum ieee802154_hw_addr_filt_flags - hardware address filtering flags 36 * 37 * The following flags are used to indicate changed address settings from 38 * the stack to the hardware. 39 * 40 * @IEEE802154_AFILT_SADDR_CHANGED: Indicates that the short address will be 41 * change. 42 * 43 * @IEEE802154_AFILT_IEEEADDR_CHANGED: Indicates that the extended address 44 * will be change. 45 * 46 * @IEEE802154_AFILT_PANID_CHANGED: Indicates that the pan id will be change. 47 * 48 * @IEEE802154_AFILT_PANC_CHANGED: Indicates that the address filter will 49 * do frame address filtering as a pan coordinator. 50 */ 51 enum ieee802154_hw_addr_filt_flags { 52 IEEE802154_AFILT_SADDR_CHANGED = BIT(0), 53 IEEE802154_AFILT_IEEEADDR_CHANGED = BIT(1), 54 IEEE802154_AFILT_PANID_CHANGED = BIT(2), 55 IEEE802154_AFILT_PANC_CHANGED = BIT(3), 56 }; 57 58 /** 59 * struct ieee802154_hw_addr_filt - hardware address filtering settings 60 * 61 * @pan_id: pan_id which should be set to the hardware address filter. 62 * 63 * @short_addr: short_addr which should be set to the hardware address filter. 64 * 65 * @ieee_addr: extended address which should be set to the hardware address 66 * filter. 67 * 68 * @pan_coord: boolean if hardware filtering should be operate as coordinator. 69 */ 70 struct ieee802154_hw_addr_filt { 71 __le16 pan_id; 72 __le16 short_addr; 73 __le64 ieee_addr; 74 bool pan_coord; 75 }; 76 77 /** 78 * struct ieee802154_hw - ieee802154 hardware 79 * 80 * @extra_tx_headroom: headroom to reserve in each transmit skb for use by the 81 * driver (e.g. for transmit headers.) 82 * 83 * @flags: hardware flags, see &enum ieee802154_hw_flags 84 * 85 * @parent: parent device of the hardware. 86 * 87 * @priv: pointer to private area that was allocated for driver use along with 88 * this structure. 89 * 90 * @phy: This points to the &struct wpan_phy allocated for this 802.15.4 PHY. 91 */ 92 struct ieee802154_hw { 93 /* filled by the driver */ 94 int extra_tx_headroom; 95 u32 flags; 96 struct device *parent; 97 void *priv; 98 99 /* filled by mac802154 core */ 100 struct wpan_phy *phy; 101 }; 102 103 /** 104 * enum ieee802154_hw_flags - hardware flags 105 * 106 * These flags are used to indicate hardware capabilities to 107 * the stack. Generally, flags here should have their meaning 108 * done in a way that the simplest hardware doesn't need setting 109 * any particular flags. There are some exceptions to this rule, 110 * however, so you are advised to review these flags carefully. 111 * 112 * @IEEE802154_HW_TX_OMIT_CKSUM: Indicates that xmitter will add FCS on it's 113 * own. 114 * 115 * @IEEE802154_HW_LBT: Indicates that transceiver will support listen before 116 * transmit. 117 * 118 * @IEEE802154_HW_CSMA_PARAMS: Indicates that transceiver will support csma 119 * parameters (max_be, min_be, backoff exponents). 120 * 121 * @IEEE802154_HW_FRAME_RETRIES: Indicates that transceiver will support ARET 122 * frame retries setting. 123 * 124 * @IEEE802154_HW_AFILT: Indicates that transceiver will support hardware 125 * address filter setting. 126 * 127 * @IEEE802154_HW_PROMISCUOUS: Indicates that transceiver will support 128 * promiscuous mode setting. 129 * 130 * @IEEE802154_HW_RX_OMIT_CKSUM: Indicates that receiver omits FCS. 131 * 132 * @IEEE802154_HW_RX_DROP_BAD_CKSUM: Indicates that receiver will not filter 133 * frames with bad checksum. 134 */ 135 enum ieee802154_hw_flags { 136 IEEE802154_HW_TX_OMIT_CKSUM = BIT(0), 137 IEEE802154_HW_LBT = BIT(1), 138 IEEE802154_HW_CSMA_PARAMS = BIT(2), 139 IEEE802154_HW_FRAME_RETRIES = BIT(3), 140 IEEE802154_HW_AFILT = BIT(4), 141 IEEE802154_HW_PROMISCUOUS = BIT(5), 142 IEEE802154_HW_RX_OMIT_CKSUM = BIT(6), 143 IEEE802154_HW_RX_DROP_BAD_CKSUM = BIT(7), 144 }; 145 146 /* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */ 147 #define IEEE802154_HW_OMIT_CKSUM (IEEE802154_HW_TX_OMIT_CKSUM | \ 148 IEEE802154_HW_RX_OMIT_CKSUM) 149 150 /* struct ieee802154_ops - callbacks from mac802154 to the driver 151 * 152 * This structure contains various callbacks that the driver may 153 * handle or, in some cases, must handle, for example to transmit 154 * a frame. 155 * 156 * start: Handler that 802.15.4 module calls for device initialization. 157 * This function is called before the first interface is attached. 158 * 159 * stop: Handler that 802.15.4 module calls for device cleanup. 160 * This function is called after the last interface is removed. 161 * 162 * xmit_sync: 163 * Handler that 802.15.4 module calls for each transmitted frame. 164 * skb cntains the buffer starting from the IEEE 802.15.4 header. 165 * The low-level driver should send the frame based on available 166 * configuration. This is called by a workqueue and useful for 167 * synchronous 802.15.4 drivers. 168 * This function should return zero or negative errno. 169 * 170 * WARNING: 171 * This will be deprecated soon. We don't accept synced xmit callbacks 172 * drivers anymore. 173 * 174 * xmit_async: 175 * Handler that 802.15.4 module calls for each transmitted frame. 176 * skb cntains the buffer starting from the IEEE 802.15.4 header. 177 * The low-level driver should send the frame based on available 178 * configuration. 179 * This function should return zero or negative errno. 180 * 181 * ed: Handler that 802.15.4 module calls for Energy Detection. 182 * This function should place the value for detected energy 183 * (usually device-dependant) in the level pointer and return 184 * either zero or negative errno. Called with pib_lock held. 185 * 186 * set_channel: 187 * Set radio for listening on specific channel. 188 * Set the device for listening on specified channel. 189 * Returns either zero, or negative errno. Called with pib_lock held. 190 * 191 * set_hw_addr_filt: 192 * Set radio for listening on specific address. 193 * Set the device for listening on specified address. 194 * Returns either zero, or negative errno. 195 * 196 * set_txpower: 197 * Set radio transmit power in mBm. Called with pib_lock held. 198 * Returns either zero, or negative errno. 199 * 200 * set_lbt 201 * Enables or disables listen before talk on the device. Called with 202 * pib_lock held. 203 * Returns either zero, or negative errno. 204 * 205 * set_cca_mode 206 * Sets the CCA mode used by the device. Called with pib_lock held. 207 * Returns either zero, or negative errno. 208 * 209 * set_cca_ed_level 210 * Sets the CCA energy detection threshold in mBm. Called with pib_lock 211 * held. 212 * Returns either zero, or negative errno. 213 * 214 * set_csma_params 215 * Sets the CSMA parameter set for the PHY. Called with pib_lock held. 216 * Returns either zero, or negative errno. 217 * 218 * set_frame_retries 219 * Sets the retransmission attempt limit. Called with pib_lock held. 220 * Returns either zero, or negative errno. 221 * 222 * set_promiscuous_mode 223 * Enables or disable promiscuous mode. 224 */ 225 struct ieee802154_ops { 226 struct module *owner; 227 int (*start)(struct ieee802154_hw *hw); 228 void (*stop)(struct ieee802154_hw *hw); 229 int (*xmit_sync)(struct ieee802154_hw *hw, 230 struct sk_buff *skb); 231 int (*xmit_async)(struct ieee802154_hw *hw, 232 struct sk_buff *skb); 233 int (*ed)(struct ieee802154_hw *hw, u8 *level); 234 int (*set_channel)(struct ieee802154_hw *hw, u8 page, 235 u8 channel); 236 int (*set_hw_addr_filt)(struct ieee802154_hw *hw, 237 struct ieee802154_hw_addr_filt *filt, 238 unsigned long changed); 239 int (*set_txpower)(struct ieee802154_hw *hw, s32 mbm); 240 int (*set_lbt)(struct ieee802154_hw *hw, bool on); 241 int (*set_cca_mode)(struct ieee802154_hw *hw, 242 const struct wpan_phy_cca *cca); 243 int (*set_cca_ed_level)(struct ieee802154_hw *hw, s32 mbm); 244 int (*set_csma_params)(struct ieee802154_hw *hw, 245 u8 min_be, u8 max_be, u8 retries); 246 int (*set_frame_retries)(struct ieee802154_hw *hw, 247 s8 retries); 248 int (*set_promiscuous_mode)(struct ieee802154_hw *hw, 249 const bool on); 250 }; 251 252 /** 253 * ieee802154_be64_to_le64 - copies and convert be64 to le64 254 * @le64_dst: le64 destination pointer 255 * @be64_src: be64 source pointer 256 */ 257 static inline void ieee802154_be64_to_le64(void *le64_dst, const void *be64_src) 258 { 259 __put_unaligned_memmove64(swab64p(be64_src), le64_dst); 260 } 261 262 /** 263 * ieee802154_le64_to_be64 - copies and convert le64 to be64 264 * @be64_dst: be64 destination pointer 265 * @le64_src: le64 source pointer 266 */ 267 static inline void ieee802154_le64_to_be64(void *be64_dst, const void *le64_src) 268 { 269 __put_unaligned_memmove64(swab64p(le64_src), be64_dst); 270 } 271 272 /** 273 * ieee802154_alloc_hw - Allocate a new hardware device 274 * 275 * This must be called once for each hardware device. The returned pointer 276 * must be used to refer to this device when calling other functions. 277 * mac802154 allocates a private data area for the driver pointed to by 278 * @priv in &struct ieee802154_hw, the size of this area is given as 279 * @priv_data_len. 280 * 281 * @priv_data_len: length of private data 282 * @ops: callbacks for this device 283 * 284 * Return: A pointer to the new hardware device, or %NULL on error. 285 */ 286 struct ieee802154_hw * 287 ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops); 288 289 /** 290 * ieee802154_free_hw - free hardware descriptor 291 * 292 * This function frees everything that was allocated, including the 293 * private data for the driver. You must call ieee802154_unregister_hw() 294 * before calling this function. 295 * 296 * @hw: the hardware to free 297 */ 298 void ieee802154_free_hw(struct ieee802154_hw *hw); 299 300 /** 301 * ieee802154_register_hw - Register hardware device 302 * 303 * You must call this function before any other functions in 304 * mac802154. Note that before a hardware can be registered, you 305 * need to fill the contained wpan_phy's information. 306 * 307 * @hw: the device to register as returned by ieee802154_alloc_hw() 308 * 309 * Return: 0 on success. An error code otherwise. 310 */ 311 int ieee802154_register_hw(struct ieee802154_hw *hw); 312 313 /** 314 * ieee802154_unregister_hw - Unregister a hardware device 315 * 316 * This function instructs mac802154 to free allocated resources 317 * and unregister netdevices from the networking subsystem. 318 * 319 * @hw: the hardware to unregister 320 */ 321 void ieee802154_unregister_hw(struct ieee802154_hw *hw); 322 323 /** 324 * ieee802154_rx_irqsafe - receive frame 325 * 326 * Like ieee802154_rx() but can be called in IRQ context 327 * (internally defers to a tasklet.) 328 * 329 * @hw: the hardware this frame came in on 330 * @skb: the buffer to receive, owned by mac802154 after this call 331 * @lqi: link quality indicator 332 */ 333 void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, 334 u8 lqi); 335 /** 336 * ieee802154_wake_queue - wake ieee802154 queue 337 * @hw: pointer as obtained from ieee802154_alloc_hw(). 338 * 339 * Drivers should use this function instead of netif_wake_queue. 340 */ 341 void ieee802154_wake_queue(struct ieee802154_hw *hw); 342 343 /** 344 * ieee802154_stop_queue - stop ieee802154 queue 345 * @hw: pointer as obtained from ieee802154_alloc_hw(). 346 * 347 * Drivers should use this function instead of netif_stop_queue. 348 */ 349 void ieee802154_stop_queue(struct ieee802154_hw *hw); 350 351 /** 352 * ieee802154_xmit_complete - frame transmission complete 353 * 354 * @hw: pointer as obtained from ieee802154_alloc_hw(). 355 * @skb: buffer for transmission 356 * @ifs_handling: indicate interframe space handling 357 */ 358 void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb, 359 bool ifs_handling); 360 361 #endif /* NET_MAC802154_H */ 362