xref: /openbmc/linux/include/net/caif/cfcnfg.h (revision f2527ec4)
1 /*
2  * Copyright (C) ST-Ericsson AB 2010
3  * Author:	Sjur Brendeland/sjur.brandeland@stericsson.com
4  * License terms: GNU General Public License (GPL) version 2
5  */
6 
7 #ifndef CFCNFG_H_
8 #define CFCNFG_H_
9 #include <linux/spinlock.h>
10 #include <linux/netdevice.h>
11 #include <net/caif/caif_layer.h>
12 #include <net/caif/cfctrl.h>
13 
14 struct cfcnfg;
15 
16 /**
17  * enum cfcnfg_phy_type -  Types of physical layers defined in CAIF Stack
18  *
19  * @CFPHYTYPE_FRAG:	Fragmented frames physical interface.
20  * @CFPHYTYPE_CAIF:	Generic CAIF physical interface
21  */
22 enum cfcnfg_phy_type {
23 	CFPHYTYPE_FRAG = 1,
24 	CFPHYTYPE_CAIF,
25 	CFPHYTYPE_MAX
26 };
27 
28 /**
29  * enum cfcnfg_phy_preference - Physical preference HW Abstraction
30  *
31  * @CFPHYPREF_UNSPECIFIED:	Default physical interface
32  *
33  * @CFPHYPREF_LOW_LAT:		Default physical interface for low-latency
34  *				traffic
35  * @CFPHYPREF_HIGH_BW:		Default physical interface for high-bandwidth
36  *				traffic
37  * @CFPHYPREF_LOOP:		TEST only Loopback interface simulating modem
38  *				responses.
39  *
40  */
41 enum cfcnfg_phy_preference {
42 	CFPHYPREF_UNSPECIFIED,
43 	CFPHYPREF_LOW_LAT,
44 	CFPHYPREF_HIGH_BW,
45 	CFPHYPREF_LOOP
46 };
47 
48 /**
49  * cfcnfg_create() - Create the CAIF configuration object.
50  */
51 struct cfcnfg *cfcnfg_create(void);
52 
53 /**
54  * cfcnfg_remove() -  Remove the CFCNFG object
55  * @cfg: config object
56  */
57 void cfcnfg_remove(struct cfcnfg *cfg);
58 
59 /**
60  * cfcnfg_add_phy_layer() - Adds a physical layer to the CAIF stack.
61  * @cnfg:	Pointer to a CAIF configuration object, created by
62  *		cfcnfg_create().
63  * @phy_type:	Specifies the type of physical interface, e.g.
64  *			CFPHYTYPE_FRAG.
65  * @dev:	Pointer to link layer device
66  * @phy_layer:	Specify the physical layer. The transmit function
67  *		MUST be set in the structure.
68  * @phyid:	The assigned physical ID for this layer, used in
69  *		cfcnfg_add_adapt_layer to specify PHY for the link.
70  * @pref:	The phy (link layer) preference.
71  * @fcs:	Specify if checksum is used in CAIF Framing Layer.
72  * @stx:	Specify if Start Of Frame eXtention is used.
73  */
74 
75 void
76 cfcnfg_add_phy_layer(struct cfcnfg *cnfg, enum cfcnfg_phy_type phy_type,
77 		     struct net_device *dev, struct cflayer *phy_layer,
78 		     u16 *phyid, enum cfcnfg_phy_preference pref,
79 		     bool fcs, bool stx);
80 
81 /**
82  * cfcnfg_del_phy_layer - Deletes an phy layer from the CAIF stack.
83  *
84  * @cnfg:	Pointer to a CAIF configuration object, created by
85  *		cfcnfg_create().
86  * @phy_layer:	Adaptation layer to be removed.
87  */
88 int cfcnfg_del_phy_layer(struct cfcnfg *cnfg, struct cflayer *phy_layer);
89 
90 /**
91  * cfcnfg_disconn_adapt_layer - Disconnects an adaptation layer.
92  *
93  * @cnfg:	Pointer to a CAIF configuration object, created by
94  *		cfcnfg_create().
95  * @adap_layer: Adaptation layer to be removed.
96  */
97 int cfcnfg_disconn_adapt_layer(struct cfcnfg *cnfg,
98 			struct cflayer *adap_layer);
99 
100 /**
101  * cfcnfg_release_adap_layer - Used by client to release the adaptation layer.
102  *
103  * @adap_layer: Adaptation layer.
104  */
105 void cfcnfg_release_adap_layer(struct cflayer *adap_layer);
106 
107 /**
108  * cfcnfg_add_adaptation_layer - Add an adaptation layer to the CAIF stack.
109  *
110  * The adaptation Layer is where the interface to application or higher-level
111  * driver functionality is implemented.
112  *
113  * @cnfg:		Pointer to a CAIF configuration object, created by
114  *			cfcnfg_create().
115  * @param:		Link setup parameters.
116  * @adap_layer:		Specify the adaptation layer; the receive and
117  *			flow-control functions MUST be set in the structure.
118  * @ifindex:		Link layer interface index used for this connection.
119  * @proto_head:		Protocol head-space needed by CAIF protocol,
120  *			excluding link layer.
121  * @proto_tail:		Protocol tail-space needed by CAIF protocol,
122  *			excluding link layer.
123  */
124 int cfcnfg_add_adaptation_layer(struct cfcnfg *cnfg,
125 			    struct cfctrl_link_param *param,
126 			    struct cflayer *adap_layer,
127 			    int *ifindex,
128 			    int *proto_head,
129 			    int *proto_tail);
130 
131 /**
132  * cfcnfg_get_phyid() - Get physical ID, given type.
133  * Returns one of the physical interfaces matching the given type.
134  * Zero if no match is found.
135  * @cnfg:	Configuration object
136  * @phy_pref:	Caif Link Layer preference
137  */
138 struct dev_info *cfcnfg_get_phyid(struct cfcnfg *cnfg,
139 		     enum cfcnfg_phy_preference phy_pref);
140 
141 /**
142  * cfcnfg_get_id_from_ifi() - Get the Physical Identifier of ifindex,
143  * 			it matches caif physical id with the kernel interface id.
144  * @cnfg:	Configuration object
145  * @ifi:	ifindex obtained from socket.c bindtodevice.
146  */
147 int cfcnfg_get_id_from_ifi(struct cfcnfg *cnfg, int ifi);
148 #endif				/* CFCNFG_H_ */
149