xref: /openbmc/linux/include/net/bond_options.h (revision e2f1cf25)
1 /*
2  * drivers/net/bond/bond_options.h - bonding options
3  * Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; either version 2 of the License, or
8  * (at your option) any later version.
9  */
10 
11 #ifndef _NET_BOND_OPTIONS_H
12 #define _NET_BOND_OPTIONS_H
13 
14 #define BOND_OPT_MAX_NAMELEN 32
15 #define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
16 #define BOND_MODE_ALL_EX(x) (~(x))
17 
18 /* Option flags:
19  * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
20  * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
21  * BOND_OPTFLAG_RAWVAL - the option parses the value itself
22  */
23 enum {
24 	BOND_OPTFLAG_NOSLAVES	= BIT(0),
25 	BOND_OPTFLAG_IFDOWN	= BIT(1),
26 	BOND_OPTFLAG_RAWVAL	= BIT(2)
27 };
28 
29 /* Value type flags:
30  * BOND_VALFLAG_DEFAULT - mark the value as default
31  * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
32  */
33 enum {
34 	BOND_VALFLAG_DEFAULT	= BIT(0),
35 	BOND_VALFLAG_MIN	= BIT(1),
36 	BOND_VALFLAG_MAX	= BIT(2)
37 };
38 
39 /* Option IDs, their bit positions correspond to their IDs */
40 enum {
41 	BOND_OPT_MODE,
42 	BOND_OPT_PACKETS_PER_SLAVE,
43 	BOND_OPT_XMIT_HASH,
44 	BOND_OPT_ARP_VALIDATE,
45 	BOND_OPT_ARP_ALL_TARGETS,
46 	BOND_OPT_FAIL_OVER_MAC,
47 	BOND_OPT_ARP_INTERVAL,
48 	BOND_OPT_ARP_TARGETS,
49 	BOND_OPT_DOWNDELAY,
50 	BOND_OPT_UPDELAY,
51 	BOND_OPT_LACP_RATE,
52 	BOND_OPT_MINLINKS,
53 	BOND_OPT_AD_SELECT,
54 	BOND_OPT_NUM_PEER_NOTIF,
55 	BOND_OPT_MIIMON,
56 	BOND_OPT_PRIMARY,
57 	BOND_OPT_PRIMARY_RESELECT,
58 	BOND_OPT_USE_CARRIER,
59 	BOND_OPT_ACTIVE_SLAVE,
60 	BOND_OPT_QUEUE_ID,
61 	BOND_OPT_ALL_SLAVES_ACTIVE,
62 	BOND_OPT_RESEND_IGMP,
63 	BOND_OPT_LP_INTERVAL,
64 	BOND_OPT_SLAVES,
65 	BOND_OPT_TLB_DYNAMIC_LB,
66 	BOND_OPT_AD_ACTOR_SYS_PRIO,
67 	BOND_OPT_AD_ACTOR_SYSTEM,
68 	BOND_OPT_AD_USER_PORT_KEY,
69 	BOND_OPT_LAST
70 };
71 
72 /* This structure is used for storing option values and for passing option
73  * values when changing an option. The logic when used as an arg is as follows:
74  * - if string != NULL -> parse it, if the opt is RAW type then return it, else
75  *   return the parse result
76  * - if string == NULL -> parse value
77  */
78 struct bond_opt_value {
79 	char *string;
80 	u64 value;
81 	u32 flags;
82 };
83 
84 struct bonding;
85 
86 struct bond_option {
87 	int id;
88 	const char *name;
89 	const char *desc;
90 	u32 flags;
91 
92 	/* unsuppmodes is used to denote modes in which the option isn't
93 	 * supported.
94 	 */
95 	unsigned long unsuppmodes;
96 	/* supported values which this option can have, can be a subset of
97 	 * BOND_OPTVAL_RANGE's value range
98 	 */
99 	const struct bond_opt_value *values;
100 
101 	int (*set)(struct bonding *bond, const struct bond_opt_value *val);
102 };
103 
104 int __bond_opt_set(struct bonding *bond, unsigned int option,
105 		   struct bond_opt_value *val);
106 int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
107 
108 const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
109 					    struct bond_opt_value *val);
110 const struct bond_option *bond_opt_get(unsigned int option);
111 const struct bond_option *bond_opt_get_by_name(const char *name);
112 const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
113 
114 /* This helper is used to initialize a bond_opt_value structure for parameter
115  * passing. There should be either a valid string or value, but not both.
116  * When value is ULLONG_MAX then string will be used.
117  */
118 static inline void __bond_opt_init(struct bond_opt_value *optval,
119 				   char *string, u64 value)
120 {
121 	memset(optval, 0, sizeof(*optval));
122 	optval->value = ULLONG_MAX;
123 	if (value == ULLONG_MAX)
124 		optval->string = string;
125 	else
126 		optval->value = value;
127 }
128 #define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)
129 #define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX)
130 
131 void bond_option_arp_ip_targets_clear(struct bonding *bond);
132 
133 #endif /* _NET_BOND_OPTIONS_H */
134