xref: /openbmc/linux/include/net/bond_options.h (revision dd21bfa4)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * drivers/net/bond/bond_options.h - bonding options
4  * Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
5  */
6 
7 #ifndef _NET_BOND_OPTIONS_H
8 #define _NET_BOND_OPTIONS_H
9 
10 #define BOND_OPT_MAX_NAMELEN 32
11 #define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
12 #define BOND_MODE_ALL_EX(x) (~(x))
13 
14 /* Option flags:
15  * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
16  * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
17  * BOND_OPTFLAG_RAWVAL - the option parses the value itself
18  */
19 enum {
20 	BOND_OPTFLAG_NOSLAVES	= BIT(0),
21 	BOND_OPTFLAG_IFDOWN	= BIT(1),
22 	BOND_OPTFLAG_RAWVAL	= BIT(2)
23 };
24 
25 /* Value type flags:
26  * BOND_VALFLAG_DEFAULT - mark the value as default
27  * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
28  */
29 enum {
30 	BOND_VALFLAG_DEFAULT	= BIT(0),
31 	BOND_VALFLAG_MIN	= BIT(1),
32 	BOND_VALFLAG_MAX	= BIT(2)
33 };
34 
35 /* Option IDs, their bit positions correspond to their IDs */
36 enum {
37 	BOND_OPT_MODE,
38 	BOND_OPT_PACKETS_PER_SLAVE,
39 	BOND_OPT_XMIT_HASH,
40 	BOND_OPT_ARP_VALIDATE,
41 	BOND_OPT_ARP_ALL_TARGETS,
42 	BOND_OPT_FAIL_OVER_MAC,
43 	BOND_OPT_ARP_INTERVAL,
44 	BOND_OPT_ARP_TARGETS,
45 	BOND_OPT_DOWNDELAY,
46 	BOND_OPT_UPDELAY,
47 	BOND_OPT_LACP_RATE,
48 	BOND_OPT_MINLINKS,
49 	BOND_OPT_AD_SELECT,
50 	BOND_OPT_NUM_PEER_NOTIF,
51 	BOND_OPT_MIIMON,
52 	BOND_OPT_PRIMARY,
53 	BOND_OPT_PRIMARY_RESELECT,
54 	BOND_OPT_USE_CARRIER,
55 	BOND_OPT_ACTIVE_SLAVE,
56 	BOND_OPT_QUEUE_ID,
57 	BOND_OPT_ALL_SLAVES_ACTIVE,
58 	BOND_OPT_RESEND_IGMP,
59 	BOND_OPT_LP_INTERVAL,
60 	BOND_OPT_SLAVES,
61 	BOND_OPT_TLB_DYNAMIC_LB,
62 	BOND_OPT_AD_ACTOR_SYS_PRIO,
63 	BOND_OPT_AD_ACTOR_SYSTEM,
64 	BOND_OPT_AD_USER_PORT_KEY,
65 	BOND_OPT_NUM_PEER_NOTIF_ALIAS,
66 	BOND_OPT_PEER_NOTIF_DELAY,
67 	BOND_OPT_LACP_ACTIVE,
68 	BOND_OPT_MISSED_MAX,
69 	BOND_OPT_LAST
70 };
71 
72 /* This structure is used for storing option values and for passing option
73  * values when changing an option. The logic when used as an arg is as follows:
74  * - if string != NULL -> parse it, if the opt is RAW type then return it, else
75  *   return the parse result
76  * - if string == NULL -> parse value
77  */
78 struct bond_opt_value {
79 	char *string;
80 	u64 value;
81 	u32 flags;
82 };
83 
84 struct bonding;
85 
86 struct bond_option {
87 	int id;
88 	const char *name;
89 	const char *desc;
90 	u32 flags;
91 
92 	/* unsuppmodes is used to denote modes in which the option isn't
93 	 * supported.
94 	 */
95 	unsigned long unsuppmodes;
96 	/* supported values which this option can have, can be a subset of
97 	 * BOND_OPTVAL_RANGE's value range
98 	 */
99 	const struct bond_opt_value *values;
100 
101 	int (*set)(struct bonding *bond, const struct bond_opt_value *val);
102 };
103 
104 int __bond_opt_set(struct bonding *bond, unsigned int option,
105 		   struct bond_opt_value *val);
106 int __bond_opt_set_notify(struct bonding *bond, unsigned int option,
107 			  struct bond_opt_value *val);
108 int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
109 
110 const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
111 					    struct bond_opt_value *val);
112 const struct bond_option *bond_opt_get(unsigned int option);
113 const struct bond_option *bond_opt_get_by_name(const char *name);
114 const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
115 
116 /* This helper is used to initialize a bond_opt_value structure for parameter
117  * passing. There should be either a valid string or value, but not both.
118  * When value is ULLONG_MAX then string will be used.
119  */
120 static inline void __bond_opt_init(struct bond_opt_value *optval,
121 				   char *string, u64 value)
122 {
123 	memset(optval, 0, sizeof(*optval));
124 	optval->value = ULLONG_MAX;
125 	if (value == ULLONG_MAX)
126 		optval->string = string;
127 	else
128 		optval->value = value;
129 }
130 #define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)
131 #define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX)
132 
133 void bond_option_arp_ip_targets_clear(struct bonding *bond);
134 
135 #endif /* _NET_BOND_OPTIONS_H */
136