xref: /openbmc/linux/include/net/bond_options.h (revision 7a010c3c)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * drivers/net/bond/bond_options.h - bonding options
4  * Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
5  */
6 
7 #ifndef _NET_BOND_OPTIONS_H
8 #define _NET_BOND_OPTIONS_H
9 
10 #define BOND_OPT_MAX_NAMELEN 32
11 #define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
12 #define BOND_MODE_ALL_EX(x) (~(x))
13 
14 /* Option flags:
15  * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
16  * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
17  * BOND_OPTFLAG_RAWVAL - the option parses the value itself
18  */
19 enum {
20 	BOND_OPTFLAG_NOSLAVES	= BIT(0),
21 	BOND_OPTFLAG_IFDOWN	= BIT(1),
22 	BOND_OPTFLAG_RAWVAL	= BIT(2)
23 };
24 
25 /* Value type flags:
26  * BOND_VALFLAG_DEFAULT - mark the value as default
27  * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
28  */
29 enum {
30 	BOND_VALFLAG_DEFAULT	= BIT(0),
31 	BOND_VALFLAG_MIN	= BIT(1),
32 	BOND_VALFLAG_MAX	= BIT(2)
33 };
34 
35 /* Option IDs, their bit positions correspond to their IDs */
36 enum {
37 	BOND_OPT_MODE,
38 	BOND_OPT_PACKETS_PER_SLAVE,
39 	BOND_OPT_XMIT_HASH,
40 	BOND_OPT_ARP_VALIDATE,
41 	BOND_OPT_ARP_ALL_TARGETS,
42 	BOND_OPT_FAIL_OVER_MAC,
43 	BOND_OPT_ARP_INTERVAL,
44 	BOND_OPT_ARP_TARGETS,
45 	BOND_OPT_DOWNDELAY,
46 	BOND_OPT_UPDELAY,
47 	BOND_OPT_LACP_RATE,
48 	BOND_OPT_MINLINKS,
49 	BOND_OPT_AD_SELECT,
50 	BOND_OPT_NUM_PEER_NOTIF,
51 	BOND_OPT_MIIMON,
52 	BOND_OPT_PRIMARY,
53 	BOND_OPT_PRIMARY_RESELECT,
54 	BOND_OPT_USE_CARRIER,
55 	BOND_OPT_ACTIVE_SLAVE,
56 	BOND_OPT_QUEUE_ID,
57 	BOND_OPT_ALL_SLAVES_ACTIVE,
58 	BOND_OPT_RESEND_IGMP,
59 	BOND_OPT_LP_INTERVAL,
60 	BOND_OPT_SLAVES,
61 	BOND_OPT_TLB_DYNAMIC_LB,
62 	BOND_OPT_AD_ACTOR_SYS_PRIO,
63 	BOND_OPT_AD_ACTOR_SYSTEM,
64 	BOND_OPT_AD_USER_PORT_KEY,
65 	BOND_OPT_NUM_PEER_NOTIF_ALIAS,
66 	BOND_OPT_PEER_NOTIF_DELAY,
67 	BOND_OPT_LACP_ACTIVE,
68 	BOND_OPT_LAST
69 };
70 
71 /* This structure is used for storing option values and for passing option
72  * values when changing an option. The logic when used as an arg is as follows:
73  * - if string != NULL -> parse it, if the opt is RAW type then return it, else
74  *   return the parse result
75  * - if string == NULL -> parse value
76  */
77 struct bond_opt_value {
78 	char *string;
79 	u64 value;
80 	u32 flags;
81 };
82 
83 struct bonding;
84 
85 struct bond_option {
86 	int id;
87 	const char *name;
88 	const char *desc;
89 	u32 flags;
90 
91 	/* unsuppmodes is used to denote modes in which the option isn't
92 	 * supported.
93 	 */
94 	unsigned long unsuppmodes;
95 	/* supported values which this option can have, can be a subset of
96 	 * BOND_OPTVAL_RANGE's value range
97 	 */
98 	const struct bond_opt_value *values;
99 
100 	int (*set)(struct bonding *bond, const struct bond_opt_value *val);
101 };
102 
103 int __bond_opt_set(struct bonding *bond, unsigned int option,
104 		   struct bond_opt_value *val);
105 int __bond_opt_set_notify(struct bonding *bond, unsigned int option,
106 			  struct bond_opt_value *val);
107 int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
108 
109 const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
110 					    struct bond_opt_value *val);
111 const struct bond_option *bond_opt_get(unsigned int option);
112 const struct bond_option *bond_opt_get_by_name(const char *name);
113 const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
114 
115 /* This helper is used to initialize a bond_opt_value structure for parameter
116  * passing. There should be either a valid string or value, but not both.
117  * When value is ULLONG_MAX then string will be used.
118  */
119 static inline void __bond_opt_init(struct bond_opt_value *optval,
120 				   char *string, u64 value)
121 {
122 	memset(optval, 0, sizeof(*optval));
123 	optval->value = ULLONG_MAX;
124 	if (value == ULLONG_MAX)
125 		optval->string = string;
126 	else
127 		optval->value = value;
128 }
129 #define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)
130 #define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX)
131 
132 void bond_option_arp_ip_targets_clear(struct bonding *bond);
133 
134 #endif /* _NET_BOND_OPTIONS_H */
135