1 /* 2 V4L2 sub-device support header. 3 4 Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> 5 6 This program is free software; you can redistribute it and/or modify 7 it under the terms of the GNU General Public License as published by 8 the Free Software Foundation; either version 2 of the License, or 9 (at your option) any later version. 10 11 This program is distributed in the hope that it will be useful, 12 but WITHOUT ANY WARRANTY; without even the implied warranty of 13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 GNU General Public License for more details. 15 16 You should have received a copy of the GNU General Public License 17 along with this program; if not, write to the Free Software 18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 19 */ 20 21 #ifndef _V4L2_SUBDEV_H 22 #define _V4L2_SUBDEV_H 23 24 #include <media/v4l2-common.h> 25 26 struct v4l2_device; 27 struct v4l2_subdev; 28 struct tuner_setup; 29 30 /* Sub-devices are devices that are connected somehow to the main bridge 31 device. These devices are usually audio/video muxers/encoders/decoders or 32 sensors and webcam controllers. 33 34 Usually these devices are controlled through an i2c bus, but other busses 35 may also be used. 36 37 The v4l2_subdev struct provides a way of accessing these devices in a 38 generic manner. Most operations that these sub-devices support fall in 39 a few categories: core ops, audio ops, video ops and tuner ops. 40 41 More categories can be added if needed, although this should remain a 42 limited set (no more than approx. 8 categories). 43 44 Each category has its own set of ops that subdev drivers can implement. 45 46 A subdev driver can leave the pointer to the category ops NULL if 47 it does not implement them (e.g. an audio subdev will generally not 48 implement the video category ops). The exception is the core category: 49 this must always be present. 50 51 These ops are all used internally so it is no problem to change, remove 52 or add ops or move ops from one to another category. Currently these 53 ops are based on the original ioctls, but since ops are not limited to 54 one argument there is room for improvement here once all i2c subdev 55 drivers are converted to use these ops. 56 */ 57 58 /* Core ops: it is highly recommended to implement at least these ops: 59 60 g_chip_ident 61 log_status 62 g_register 63 s_register 64 65 This provides basic debugging support. 66 67 The ioctl ops is meant for generic ioctl-like commands. Depending on 68 the use-case it might be better to use subdev-specific ops (currently 69 not yet implemented) since ops provide proper type-checking. 70 */ 71 struct v4l2_subdev_core_ops { 72 int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); 73 int (*log_status)(struct v4l2_subdev *sd); 74 int (*init)(struct v4l2_subdev *sd, u32 val); 75 int (*s_standby)(struct v4l2_subdev *sd, u32 standby); 76 int (*reset)(struct v4l2_subdev *sd, u32 val); 77 int (*s_gpio)(struct v4l2_subdev *sd, u32 val); 78 int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc); 79 int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl); 80 int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl); 81 int (*g_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); 82 int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); 83 int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); 84 int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm); 85 long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); 86 #ifdef CONFIG_VIDEO_ADV_DEBUG 87 int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg); 88 int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg); 89 #endif 90 }; 91 92 struct v4l2_subdev_tuner_ops { 93 int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type); 94 int (*s_radio)(struct v4l2_subdev *sd); 95 int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); 96 int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); 97 int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); 98 int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); 99 int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); 100 int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type); 101 int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config); 102 }; 103 104 struct v4l2_subdev_audio_ops { 105 int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq); 106 int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq); 107 int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); 108 }; 109 110 struct v4l2_subdev_video_ops { 111 int (*s_routing)(struct v4l2_subdev *sd, const struct v4l2_routing *route); 112 int (*s_crystal_freq)(struct v4l2_subdev *sd, struct v4l2_crystal_freq *freq); 113 int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line); 114 int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data); 115 int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data); 116 int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap); 117 int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std); 118 int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std); 119 int (*g_input_status)(struct v4l2_subdev *sd, u32 *status); 120 int (*s_stream)(struct v4l2_subdev *sd, int enable); 121 int (*enum_fmt)(struct v4l2_subdev *sd, struct v4l2_fmtdesc *fmtdesc); 122 int (*g_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); 123 int (*try_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); 124 int (*s_fmt)(struct v4l2_subdev *sd, struct v4l2_format *fmt); 125 int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param); 126 int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param); 127 int (*enum_framesizes)(struct v4l2_subdev *sd, struct v4l2_frmsizeenum *fsize); 128 int (*enum_frameintervals)(struct v4l2_subdev *sd, struct v4l2_frmivalenum *fival); 129 }; 130 131 struct v4l2_subdev_ops { 132 const struct v4l2_subdev_core_ops *core; 133 const struct v4l2_subdev_tuner_ops *tuner; 134 const struct v4l2_subdev_audio_ops *audio; 135 const struct v4l2_subdev_video_ops *video; 136 }; 137 138 #define V4L2_SUBDEV_NAME_SIZE 32 139 140 /* Each instance of a subdev driver should create this struct, either 141 stand-alone or embedded in a larger struct. 142 */ 143 struct v4l2_subdev { 144 struct list_head list; 145 struct module *owner; 146 struct v4l2_device *v4l2_dev; 147 const struct v4l2_subdev_ops *ops; 148 /* name must be unique */ 149 char name[V4L2_SUBDEV_NAME_SIZE]; 150 /* can be used to group similar subdevs, value is driver-specific */ 151 u32 grp_id; 152 /* pointer to private data */ 153 void *priv; 154 }; 155 156 static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p) 157 { 158 sd->priv = p; 159 } 160 161 static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd) 162 { 163 return sd->priv; 164 } 165 166 /* Convert an ioctl-type command to the proper v4l2_subdev_ops function call. 167 This is used by subdev modules that can be called by both old-style ioctl 168 commands and through the v4l2_subdev_ops. 169 170 The ioctl API of the subdev driver can call this function to call the 171 right ops based on the ioctl cmd and arg. 172 173 Once all subdev drivers have been converted and all drivers no longer 174 use the ioctl interface, then this function can be removed. 175 */ 176 int v4l2_subdev_command(struct v4l2_subdev *sd, unsigned cmd, void *arg); 177 178 static inline void v4l2_subdev_init(struct v4l2_subdev *sd, 179 const struct v4l2_subdev_ops *ops) 180 { 181 INIT_LIST_HEAD(&sd->list); 182 /* ops->core MUST be set */ 183 BUG_ON(!ops || !ops->core); 184 sd->ops = ops; 185 sd->v4l2_dev = NULL; 186 sd->name[0] = '\0'; 187 sd->grp_id = 0; 188 sd->priv = NULL; 189 } 190 191 /* Call an ops of a v4l2_subdev, doing the right checks against 192 NULL pointers. 193 194 Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip); 195 */ 196 #define v4l2_subdev_call(sd, o, f, args...) \ 197 (!(sd) ? -ENODEV : (((sd) && (sd)->ops->o && (sd)->ops->o->f) ? \ 198 (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD)) 199 200 /* Send a notification to v4l2_device. */ 201 #define v4l2_subdev_notify(sd, notification, arg) \ 202 ((!(sd) || !(sd)->v4l2_dev || !(sd)->v4l2_dev->notify) ? -ENODEV : \ 203 (sd)->v4l2_dev->notify((sd), (notification), (arg))) 204 205 #endif 206