1 /* 2 V4L2 sub-device support header. 3 4 Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> 5 6 This program is free software; you can redistribute it and/or modify 7 it under the terms of the GNU General Public License as published by 8 the Free Software Foundation; either version 2 of the License, or 9 (at your option) any later version. 10 11 This program is distributed in the hope that it will be useful, 12 but WITHOUT ANY WARRANTY; without even the implied warranty of 13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 GNU General Public License for more details. 15 16 You should have received a copy of the GNU General Public License 17 along with this program; if not, write to the Free Software 18 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 19 */ 20 21 #ifndef _V4L2_SUBDEV_H 22 #define _V4L2_SUBDEV_H 23 24 #include <linux/types.h> 25 #include <linux/v4l2-subdev.h> 26 #include <media/media-entity.h> 27 #include <media/v4l2-async.h> 28 #include <media/v4l2-common.h> 29 #include <media/v4l2-dev.h> 30 #include <media/v4l2-fh.h> 31 #include <media/v4l2-mediabus.h> 32 33 /* generic v4l2_device notify callback notification values */ 34 #define V4L2_SUBDEV_IR_RX_NOTIFY _IOW('v', 0, u32) 35 #define V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ 0x00000001 36 #define V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED 0x00000002 37 #define V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN 0x00000004 38 #define V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN 0x00000008 39 40 #define V4L2_SUBDEV_IR_TX_NOTIFY _IOW('v', 1, u32) 41 #define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ 0x00000001 42 43 #define V4L2_DEVICE_NOTIFY_EVENT _IOW('v', 2, struct v4l2_event) 44 45 struct v4l2_device; 46 struct v4l2_ctrl_handler; 47 struct v4l2_event; 48 struct v4l2_event_subscription; 49 struct v4l2_fh; 50 struct v4l2_subdev; 51 struct v4l2_subdev_fh; 52 struct tuner_setup; 53 struct v4l2_mbus_frame_desc; 54 55 /* decode_vbi_line */ 56 struct v4l2_decode_vbi_line { 57 u32 is_second_field; /* Set to 0 for the first (odd) field, 58 set to 1 for the second (even) field. */ 59 u8 *p; /* Pointer to the sliced VBI data from the decoder. 60 On exit points to the start of the payload. */ 61 u32 line; /* Line number of the sliced VBI data (1-23) */ 62 u32 type; /* VBI service type (V4L2_SLICED_*). 0 if no service found */ 63 }; 64 65 /* Sub-devices are devices that are connected somehow to the main bridge 66 device. These devices are usually audio/video muxers/encoders/decoders or 67 sensors and webcam controllers. 68 69 Usually these devices are controlled through an i2c bus, but other busses 70 may also be used. 71 72 The v4l2_subdev struct provides a way of accessing these devices in a 73 generic manner. Most operations that these sub-devices support fall in 74 a few categories: core ops, audio ops, video ops and tuner ops. 75 76 More categories can be added if needed, although this should remain a 77 limited set (no more than approx. 8 categories). 78 79 Each category has its own set of ops that subdev drivers can implement. 80 81 A subdev driver can leave the pointer to the category ops NULL if 82 it does not implement them (e.g. an audio subdev will generally not 83 implement the video category ops). The exception is the core category: 84 this must always be present. 85 86 These ops are all used internally so it is no problem to change, remove 87 or add ops or move ops from one to another category. Currently these 88 ops are based on the original ioctls, but since ops are not limited to 89 one argument there is room for improvement here once all i2c subdev 90 drivers are converted to use these ops. 91 */ 92 93 /* Core ops: it is highly recommended to implement at least these ops: 94 95 log_status 96 g_register 97 s_register 98 99 This provides basic debugging support. 100 101 The ioctl ops is meant for generic ioctl-like commands. Depending on 102 the use-case it might be better to use subdev-specific ops (currently 103 not yet implemented) since ops provide proper type-checking. 104 */ 105 106 /* Subdevice external IO pin configuration */ 107 #define V4L2_SUBDEV_IO_PIN_DISABLE (1 << 0) /* ENABLE assumed */ 108 #define V4L2_SUBDEV_IO_PIN_OUTPUT (1 << 1) 109 #define V4L2_SUBDEV_IO_PIN_INPUT (1 << 2) 110 #define V4L2_SUBDEV_IO_PIN_SET_VALUE (1 << 3) /* Set output value */ 111 #define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW (1 << 4) /* ACTIVE HIGH assumed */ 112 113 struct v4l2_subdev_io_pin_config { 114 u32 flags; /* V4L2_SUBDEV_IO_PIN_* flags for this pin's config */ 115 u8 pin; /* Chip external IO pin to configure */ 116 u8 function; /* Internal signal pad/function to route to IO pin */ 117 u8 value; /* Initial value for pin - e.g. GPIO output value */ 118 u8 strength; /* Pin drive strength */ 119 }; 120 121 /** 122 * struct v4l2_subdev_core_ops - Define core ops callbacks for subdevs 123 * 124 * @log_status: callback for VIDIOC_LOG_STATUS ioctl handler code. 125 * 126 * @s_io_pin_config: configure one or more chip I/O pins for chips that 127 * multiplex different internal signal pads out to IO pins. This function 128 * takes a pointer to an array of 'n' pin configuration entries, one for 129 * each pin being configured. This function could be called at times 130 * other than just subdevice initialization. 131 * 132 * @init: initialize the sensor registers to some sort of reasonable default 133 * values. Do not use for new drivers and should be removed in existing 134 * drivers. 135 * 136 * @load_fw: load firmware. 137 * 138 * @reset: generic reset command. The argument selects which subsystems to 139 * reset. Passing 0 will always reset the whole chip. Do not use for new 140 * drivers without discussing this first on the linux-media mailinglist. 141 * There should be no reason normally to reset a device. 142 * 143 * @s_gpio: set GPIO pins. Very simple right now, might need to be extended with 144 * a direction argument if needed. 145 * 146 * @queryctrl: callback for VIDIOC_QUERYCTL ioctl handler code. 147 * 148 * @g_ctrl: callback for VIDIOC_G_CTRL ioctl handler code. 149 * 150 * @s_ctrl: callback for VIDIOC_S_CTRL ioctl handler code. 151 * 152 * @g_ext_ctrls: callback for VIDIOC_G_EXT_CTRLS ioctl handler code. 153 * 154 * @s_ext_ctrls: callback for VIDIOC_S_EXT_CTRLS ioctl handler code. 155 * 156 * @try_ext_ctrls: callback for VIDIOC_TRY_EXT_CTRLS ioctl handler code. 157 * 158 * @querymenu: callback for VIDIOC_QUERYMENU ioctl handler code. 159 * 160 * @ioctl: called at the end of ioctl() syscall handler at the V4L2 core. 161 * used to provide support for private ioctls used on the driver. 162 * 163 * @compat_ioctl32: called when a 32 bits application uses a 64 bits Kernel, 164 * in order to fix data passed from/to userspace. 165 * 166 * @g_register: callback for VIDIOC_G_REGISTER ioctl handler code. 167 * 168 * @s_register: callback for VIDIOC_G_REGISTER ioctl handler code. 169 * 170 * @s_power: puts subdevice in power saving mode (on == 0) or normal operation 171 * mode (on == 1). 172 * 173 * @interrupt_service_routine: Called by the bridge chip's interrupt service 174 * handler, when an interrupt status has be raised due to this subdev, 175 * so that this subdev can handle the details. It may schedule work to be 176 * performed later. It must not sleep. *Called from an IRQ context*. 177 * 178 * @subscribe_event: used by the drivers to request the control framework that 179 * for it to be warned when the value of a control changes. 180 * 181 * @unsubscribe_event: remove event subscription from the control framework. 182 * 183 * @registered_async: the subdevice has been registered async. 184 */ 185 struct v4l2_subdev_core_ops { 186 int (*log_status)(struct v4l2_subdev *sd); 187 int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n, 188 struct v4l2_subdev_io_pin_config *pincfg); 189 int (*init)(struct v4l2_subdev *sd, u32 val); 190 int (*load_fw)(struct v4l2_subdev *sd); 191 int (*reset)(struct v4l2_subdev *sd, u32 val); 192 int (*s_gpio)(struct v4l2_subdev *sd, u32 val); 193 int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc); 194 int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl); 195 int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl); 196 int (*g_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); 197 int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); 198 int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls); 199 int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm); 200 long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); 201 #ifdef CONFIG_COMPAT 202 long (*compat_ioctl32)(struct v4l2_subdev *sd, unsigned int cmd, 203 unsigned long arg); 204 #endif 205 #ifdef CONFIG_VIDEO_ADV_DEBUG 206 int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg); 207 int (*s_register)(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg); 208 #endif 209 int (*s_power)(struct v4l2_subdev *sd, int on); 210 int (*interrupt_service_routine)(struct v4l2_subdev *sd, 211 u32 status, bool *handled); 212 int (*subscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh, 213 struct v4l2_event_subscription *sub); 214 int (*unsubscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh, 215 struct v4l2_event_subscription *sub); 216 int (*registered_async)(struct v4l2_subdev *sd); 217 }; 218 219 /** 220 * struct s_radio - Callbacks used when v4l device was opened in radio mode. 221 * 222 * @s_radio: callback for VIDIOC_S_RADIO ioctl handler code. 223 * 224 * @s_frequency: callback for VIDIOC_S_FREQUENCY ioctl handler code. 225 * 226 * @g_frequency: callback for VIDIOC_G_FREQUENCY ioctl handler code. 227 * freq->type must be filled in. Normally done by video_ioctl2 228 * or the bridge driver. 229 * 230 * @enum_freq_bands: callback for VIDIOC_ENUM_FREQ_BANDS ioctl handler code. 231 * 232 * @g_tuner: callback for VIDIOC_G_TUNER ioctl handler code. 233 * 234 * @s_tuner: callback for VIDIOC_S_TUNER ioctl handler code. vt->type must be 235 * filled in. Normally done by video_ioctl2 or the 236 * bridge driver. 237 * 238 * @g_modulator: callback for VIDIOC_G_MODULATOR ioctl handler code. 239 * 240 * @s_modulator: callback for VIDIOC_S_MODULATOR ioctl handler code. 241 * 242 * @s_type_addr: sets tuner type and its I2C addr. 243 * 244 * @s_config: sets tda9887 specific stuff, like port1, port2 and qss 245 */ 246 struct v4l2_subdev_tuner_ops { 247 int (*s_radio)(struct v4l2_subdev *sd); 248 int (*s_frequency)(struct v4l2_subdev *sd, const struct v4l2_frequency *freq); 249 int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); 250 int (*enum_freq_bands)(struct v4l2_subdev *sd, struct v4l2_frequency_band *band); 251 int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); 252 int (*s_tuner)(struct v4l2_subdev *sd, const struct v4l2_tuner *vt); 253 int (*g_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm); 254 int (*s_modulator)(struct v4l2_subdev *sd, const struct v4l2_modulator *vm); 255 int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type); 256 int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config); 257 }; 258 259 /** 260 * struct v4l2_subdev_audio_ops - Callbacks used for audio-related settings 261 * 262 * @s_clock_freq: set the frequency (in Hz) of the audio clock output. 263 * Used to slave an audio processor to the video decoder, ensuring that 264 * audio and video remain synchronized. Usual values for the frequency 265 * are 48000, 44100 or 32000 Hz. If the frequency is not supported, then 266 * -EINVAL is returned. 267 * 268 * @s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard 269 * way to select I2S clock used by driving digital audio streams at some 270 * board designs. Usual values for the frequency are 1024000 and 2048000. 271 * If the frequency is not supported, then -EINVAL is returned. 272 * 273 * @s_routing: used to define the input and/or output pins of an audio chip, 274 * and any additional configuration data. 275 * Never attempt to use user-level input IDs (e.g. Composite, S-Video, 276 * Tuner) at this level. An i2c device shouldn't know about whether an 277 * input pin is connected to a Composite connector, become on another 278 * board or platform it might be connected to something else entirely. 279 * The calling driver is responsible for mapping a user-level input to 280 * the right pins on the i2c device. 281 * 282 * @s_stream: used to notify the audio code that stream will start or has 283 * stopped. 284 */ 285 struct v4l2_subdev_audio_ops { 286 int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq); 287 int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq); 288 int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); 289 int (*s_stream)(struct v4l2_subdev *sd, int enable); 290 }; 291 292 /* Indicates the @length field specifies maximum data length. */ 293 #define V4L2_MBUS_FRAME_DESC_FL_LEN_MAX (1U << 0) 294 /* 295 * Indicates that the format does not have line offsets, i.e. the 296 * receiver should use 1D DMA. 297 */ 298 #define V4L2_MBUS_FRAME_DESC_FL_BLOB (1U << 1) 299 300 /** 301 * struct v4l2_mbus_frame_desc_entry - media bus frame description structure 302 * 303 * @flags: V4L2_MBUS_FRAME_DESC_FL_* flags 304 * @pixelcode: media bus pixel code, valid if FRAME_DESC_FL_BLOB is not set 305 * @length: number of octets per frame, valid if V4L2_MBUS_FRAME_DESC_FL_BLOB 306 * is set 307 */ 308 struct v4l2_mbus_frame_desc_entry { 309 u16 flags; 310 u32 pixelcode; 311 u32 length; 312 }; 313 314 #define V4L2_FRAME_DESC_ENTRY_MAX 4 315 316 /** 317 * struct v4l2_mbus_frame_desc - media bus data frame description 318 * @entry: frame descriptors array 319 * @num_entries: number of entries in @entry array 320 */ 321 struct v4l2_mbus_frame_desc { 322 struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX]; 323 unsigned short num_entries; 324 }; 325 326 /** 327 * struct v4l2_subdev_video_ops - Callbacks used when v4l device was opened 328 * in video mode. 329 * 330 * @s_routing: see s_routing in audio_ops, except this version is for video 331 * devices. 332 * 333 * @s_crystal_freq: sets the frequency of the crystal used to generate the 334 * clocks in Hz. An extra flags field allows device specific configuration 335 * regarding clock frequency dividers, etc. If not used, then set flags 336 * to 0. If the frequency is not supported, then -EINVAL is returned. 337 * 338 * @g_std: callback for VIDIOC_G_STD ioctl handler code. 339 * 340 * @s_std: callback for VIDIOC_S_STD ioctl handler code. 341 * 342 * @s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by 343 * video input devices. 344 * 345 * @g_std_output: get current standard for video OUTPUT devices. This is ignored 346 * by video input devices. 347 * 348 * @querystd: callback for VIDIOC_QUERYSTD ioctl handler code. 349 * 350 * @g_tvnorms: get v4l2_std_id with all standards supported by the video 351 * CAPTURE device. This is ignored by video output devices. 352 * 353 * @g_tvnorms_output: get v4l2_std_id with all standards supported by the video 354 * OUTPUT device. This is ignored by video capture devices. 355 * 356 * @g_input_status: get input status. Same as the status field in the v4l2_input 357 * struct. 358 * 359 * @s_stream: used to notify the driver that a video stream will start or has 360 * stopped. 361 * 362 * @cropcap: callback for VIDIOC_CROPCAP ioctl handler code. 363 * 364 * @g_crop: callback for VIDIOC_G_CROP ioctl handler code. 365 * 366 * @s_crop: callback for VIDIOC_S_CROP ioctl handler code. 367 * 368 * @g_parm: callback for VIDIOC_G_PARM ioctl handler code. 369 * 370 * @s_parm: callback for VIDIOC_S_PARM ioctl handler code. 371 * 372 * @g_frame_interval: callback for VIDIOC_G_FRAMEINTERVAL ioctl handler code. 373 * 374 * @s_frame_interval: callback for VIDIOC_S_FRAMEINTERVAL ioctl handler code. 375 * 376 * @s_dv_timings: Set custom dv timings in the sub device. This is used 377 * when sub device is capable of setting detailed timing information 378 * in the hardware to generate/detect the video signal. 379 * 380 * @g_dv_timings: Get custom dv timings in the sub device. 381 * 382 * @query_dv_timings: callback for VIDIOC_QUERY_DV_TIMINGS ioctl handler code. 383 * 384 * @g_mbus_config: get supported mediabus configurations 385 * 386 * @s_mbus_config: set a certain mediabus configuration. This operation is added 387 * for compatibility with soc-camera drivers and should not be used by new 388 * software. 389 * 390 * @s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev 391 * can adjust @size to a lower value and must not write more data to the 392 * buffer starting at @data than the original value of @size. 393 */ 394 struct v4l2_subdev_video_ops { 395 int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); 396 int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags); 397 int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm); 398 int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); 399 int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std); 400 int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std); 401 int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std); 402 int (*g_tvnorms)(struct v4l2_subdev *sd, v4l2_std_id *std); 403 int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std); 404 int (*g_input_status)(struct v4l2_subdev *sd, u32 *status); 405 int (*s_stream)(struct v4l2_subdev *sd, int enable); 406 int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc); 407 int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop); 408 int (*s_crop)(struct v4l2_subdev *sd, const struct v4l2_crop *crop); 409 int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param); 410 int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param); 411 int (*g_frame_interval)(struct v4l2_subdev *sd, 412 struct v4l2_subdev_frame_interval *interval); 413 int (*s_frame_interval)(struct v4l2_subdev *sd, 414 struct v4l2_subdev_frame_interval *interval); 415 int (*s_dv_timings)(struct v4l2_subdev *sd, 416 struct v4l2_dv_timings *timings); 417 int (*g_dv_timings)(struct v4l2_subdev *sd, 418 struct v4l2_dv_timings *timings); 419 int (*query_dv_timings)(struct v4l2_subdev *sd, 420 struct v4l2_dv_timings *timings); 421 int (*g_mbus_config)(struct v4l2_subdev *sd, 422 struct v4l2_mbus_config *cfg); 423 int (*s_mbus_config)(struct v4l2_subdev *sd, 424 const struct v4l2_mbus_config *cfg); 425 int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf, 426 unsigned int *size); 427 }; 428 429 /** 430 * struct v4l2_subdev_vbi_ops - Callbacks used when v4l device was opened 431 * in video mode via the vbi device node. 432 * 433 * @decode_vbi_line: video decoders that support sliced VBI need to implement 434 * this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the 435 * start of the VBI data that was generated by the decoder. The driver 436 * then parses the sliced VBI data and sets the other fields in the 437 * struct accordingly. The pointer p is updated to point to the start of 438 * the payload which can be copied verbatim into the data field of the 439 * v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the 440 * type field is set to 0 on return. 441 * 442 * @s_vbi_data: used to generate VBI signals on a video signal. 443 * v4l2_sliced_vbi_data is filled with the data packets that should be 444 * output. Note that if you set the line field to 0, then that VBI signal 445 * is disabled. If no valid VBI data was found, then the type field is 446 * set to 0 on return. 447 * 448 * @g_vbi_data: used to obtain the sliced VBI packet from a readback register. 449 * Not all video decoders support this. If no data is available because 450 * the readback register contains invalid or erroneous data -EIO is 451 * returned. Note that you must fill in the 'id' member and the 'field' 452 * member (to determine whether CC data from the first or second field 453 * should be obtained). 454 * 455 * @g_sliced_vbi_cap: callback for VIDIOC_SLICED_VBI_CAP ioctl handler code. 456 * 457 * @s_raw_fmt: setup the video encoder/decoder for raw VBI. 458 * 459 * @g_sliced_fmt: retrieve the current sliced VBI settings. 460 * 461 * @s_sliced_fmt: setup the sliced VBI settings. 462 */ 463 struct v4l2_subdev_vbi_ops { 464 int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line); 465 int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data); 466 int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data); 467 int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap); 468 int (*s_raw_fmt)(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt); 469 int (*g_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); 470 int (*s_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); 471 }; 472 473 /** 474 * struct v4l2_subdev_sensor_ops - v4l2-subdev sensor operations 475 * @g_skip_top_lines: number of lines at the top of the image to be skipped. 476 * This is needed for some sensors, which always corrupt 477 * several top lines of the output image, or which send their 478 * metadata in them. 479 * @g_skip_frames: number of frames to skip at stream start. This is needed for 480 * buggy sensors that generate faulty frames when they are 481 * turned on. 482 */ 483 struct v4l2_subdev_sensor_ops { 484 int (*g_skip_top_lines)(struct v4l2_subdev *sd, u32 *lines); 485 int (*g_skip_frames)(struct v4l2_subdev *sd, u32 *frames); 486 }; 487 488 /* 489 [rt]x_g_parameters: Get the current operating parameters and state of the 490 the IR receiver or transmitter. 491 492 [rt]x_s_parameters: Set the current operating parameters and state of the 493 the IR receiver or transmitter. It is recommended to call 494 [rt]x_g_parameters first to fill out the current state, and only change 495 the fields that need to be changed. Upon return, the actual device 496 operating parameters and state will be returned. Note that hardware 497 limitations may prevent the actual settings from matching the requested 498 settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz 499 was requested. An exception is when the shutdown parameter is true. 500 The last used operational parameters will be returned, but the actual 501 state of the hardware be different to minimize power consumption and 502 processing when shutdown is true. 503 504 rx_read: Reads received codes or pulse width data. 505 The semantics are similar to a non-blocking read() call. 506 507 tx_write: Writes codes or pulse width data for transmission. 508 The semantics are similar to a non-blocking write() call. 509 */ 510 511 enum v4l2_subdev_ir_mode { 512 V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* uses struct ir_raw_event records */ 513 }; 514 515 struct v4l2_subdev_ir_parameters { 516 /* Either Rx or Tx */ 517 unsigned int bytes_per_data_element; /* of data in read or write call */ 518 enum v4l2_subdev_ir_mode mode; 519 520 bool enable; 521 bool interrupt_enable; 522 bool shutdown; /* true: set hardware to low/no power, false: normal */ 523 524 bool modulation; /* true: uses carrier, false: baseband */ 525 u32 max_pulse_width; /* ns, valid only for baseband signal */ 526 unsigned int carrier_freq; /* Hz, valid only for modulated signal*/ 527 unsigned int duty_cycle; /* percent, valid only for modulated signal*/ 528 bool invert_level; /* invert signal level */ 529 530 /* Tx only */ 531 bool invert_carrier_sense; /* Send 0/space as a carrier burst */ 532 533 /* Rx only */ 534 u32 noise_filter_min_width; /* ns, min time of a valid pulse */ 535 unsigned int carrier_range_lower; /* Hz, valid only for modulated sig */ 536 unsigned int carrier_range_upper; /* Hz, valid only for modulated sig */ 537 u32 resolution; /* ns */ 538 }; 539 540 struct v4l2_subdev_ir_ops { 541 /* Receiver */ 542 int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count, 543 ssize_t *num); 544 545 int (*rx_g_parameters)(struct v4l2_subdev *sd, 546 struct v4l2_subdev_ir_parameters *params); 547 int (*rx_s_parameters)(struct v4l2_subdev *sd, 548 struct v4l2_subdev_ir_parameters *params); 549 550 /* Transmitter */ 551 int (*tx_write)(struct v4l2_subdev *sd, u8 *buf, size_t count, 552 ssize_t *num); 553 554 int (*tx_g_parameters)(struct v4l2_subdev *sd, 555 struct v4l2_subdev_ir_parameters *params); 556 int (*tx_s_parameters)(struct v4l2_subdev *sd, 557 struct v4l2_subdev_ir_parameters *params); 558 }; 559 560 /* 561 * Used for storing subdev pad information. This structure only needs 562 * to be passed to the pad op if the 'which' field of the main argument 563 * is set to V4L2_SUBDEV_FORMAT_TRY. For V4L2_SUBDEV_FORMAT_ACTIVE it is 564 * safe to pass NULL. 565 */ 566 struct v4l2_subdev_pad_config { 567 struct v4l2_mbus_framefmt try_fmt; 568 struct v4l2_rect try_crop; 569 struct v4l2_rect try_compose; 570 }; 571 572 /** 573 * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations 574 * 575 * @init_cfg: initialize the pad config to default values 576 * @enum_mbus_code: callback for VIDIOC_SUBDEV_ENUM_MBUS_CODE ioctl handler 577 * code. 578 * @enum_frame_size: callback for VIDIOC_SUBDEV_ENUM_FRAME_SIZE ioctl handler 579 * code. 580 * 581 * @enum_frame_interval: callback for VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL ioctl 582 * handler code. 583 * 584 * @get_fmt: callback for VIDIOC_SUBDEV_G_FMT ioctl handler code. 585 * 586 * @set_fmt: callback for VIDIOC_SUBDEV_S_FMT ioctl handler code. 587 * 588 * @get_selection: callback for VIDIOC_SUBDEV_G_SELECTION ioctl handler code. 589 * 590 * @set_selection: callback for VIDIOC_SUBDEV_S_SELECTION ioctl handler code. 591 * 592 * @get_edid: callback for VIDIOC_SUBDEV_G_EDID ioctl handler code. 593 * 594 * @set_edid: callback for VIDIOC_SUBDEV_S_EDID ioctl handler code. 595 * 596 * @dv_timings_cap: callback for VIDIOC_SUBDEV_DV_TIMINGS_CAP ioctl handler 597 * code. 598 * 599 * @enum_dv_timings: callback for VIDIOC_SUBDEV_ENUM_DV_TIMINGS ioctl handler 600 * code. 601 * 602 * @link_validate: used by the media controller code to check if the links 603 * that belongs to a pipeline can be used for stream. 604 * 605 * @get_frame_desc: get the current low level media bus frame parameters. 606 * 607 * @set_frame_desc: set the low level media bus frame parameters, @fd array 608 * may be adjusted by the subdev driver to device capabilities. 609 */ 610 struct v4l2_subdev_pad_ops { 611 int (*init_cfg)(struct v4l2_subdev *sd, 612 struct v4l2_subdev_pad_config *cfg); 613 int (*enum_mbus_code)(struct v4l2_subdev *sd, 614 struct v4l2_subdev_pad_config *cfg, 615 struct v4l2_subdev_mbus_code_enum *code); 616 int (*enum_frame_size)(struct v4l2_subdev *sd, 617 struct v4l2_subdev_pad_config *cfg, 618 struct v4l2_subdev_frame_size_enum *fse); 619 int (*enum_frame_interval)(struct v4l2_subdev *sd, 620 struct v4l2_subdev_pad_config *cfg, 621 struct v4l2_subdev_frame_interval_enum *fie); 622 int (*get_fmt)(struct v4l2_subdev *sd, 623 struct v4l2_subdev_pad_config *cfg, 624 struct v4l2_subdev_format *format); 625 int (*set_fmt)(struct v4l2_subdev *sd, 626 struct v4l2_subdev_pad_config *cfg, 627 struct v4l2_subdev_format *format); 628 int (*get_selection)(struct v4l2_subdev *sd, 629 struct v4l2_subdev_pad_config *cfg, 630 struct v4l2_subdev_selection *sel); 631 int (*set_selection)(struct v4l2_subdev *sd, 632 struct v4l2_subdev_pad_config *cfg, 633 struct v4l2_subdev_selection *sel); 634 int (*get_edid)(struct v4l2_subdev *sd, struct v4l2_edid *edid); 635 int (*set_edid)(struct v4l2_subdev *sd, struct v4l2_edid *edid); 636 int (*dv_timings_cap)(struct v4l2_subdev *sd, 637 struct v4l2_dv_timings_cap *cap); 638 int (*enum_dv_timings)(struct v4l2_subdev *sd, 639 struct v4l2_enum_dv_timings *timings); 640 #ifdef CONFIG_MEDIA_CONTROLLER 641 int (*link_validate)(struct v4l2_subdev *sd, struct media_link *link, 642 struct v4l2_subdev_format *source_fmt, 643 struct v4l2_subdev_format *sink_fmt); 644 #endif /* CONFIG_MEDIA_CONTROLLER */ 645 int (*get_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, 646 struct v4l2_mbus_frame_desc *fd); 647 int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, 648 struct v4l2_mbus_frame_desc *fd); 649 }; 650 651 struct v4l2_subdev_ops { 652 const struct v4l2_subdev_core_ops *core; 653 const struct v4l2_subdev_tuner_ops *tuner; 654 const struct v4l2_subdev_audio_ops *audio; 655 const struct v4l2_subdev_video_ops *video; 656 const struct v4l2_subdev_vbi_ops *vbi; 657 const struct v4l2_subdev_ir_ops *ir; 658 const struct v4l2_subdev_sensor_ops *sensor; 659 const struct v4l2_subdev_pad_ops *pad; 660 }; 661 662 /* 663 * Internal ops. Never call this from drivers, only the v4l2 framework can call 664 * these ops. 665 * 666 * registered: called when this subdev is registered. When called the v4l2_dev 667 * field is set to the correct v4l2_device. 668 * 669 * unregistered: called when this subdev is unregistered. When called the 670 * v4l2_dev field is still set to the correct v4l2_device. 671 * 672 * open: called when the subdev device node is opened by an application. 673 * 674 * close: called when the subdev device node is closed. 675 */ 676 struct v4l2_subdev_internal_ops { 677 int (*registered)(struct v4l2_subdev *sd); 678 void (*unregistered)(struct v4l2_subdev *sd); 679 int (*open)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh); 680 int (*close)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh); 681 }; 682 683 #define V4L2_SUBDEV_NAME_SIZE 32 684 685 /* Set this flag if this subdev is a i2c device. */ 686 #define V4L2_SUBDEV_FL_IS_I2C (1U << 0) 687 /* Set this flag if this subdev is a spi device. */ 688 #define V4L2_SUBDEV_FL_IS_SPI (1U << 1) 689 /* Set this flag if this subdev needs a device node. */ 690 #define V4L2_SUBDEV_FL_HAS_DEVNODE (1U << 2) 691 /* Set this flag if this subdev generates events. */ 692 #define V4L2_SUBDEV_FL_HAS_EVENTS (1U << 3) 693 694 struct regulator_bulk_data; 695 696 struct v4l2_subdev_platform_data { 697 /* Optional regulators uset to power on/off the subdevice */ 698 struct regulator_bulk_data *regulators; 699 int num_regulators; 700 701 /* Per-subdevice data, specific for a certain video host device */ 702 void *host_priv; 703 }; 704 705 /* Each instance of a subdev driver should create this struct, either 706 stand-alone or embedded in a larger struct. 707 */ 708 struct v4l2_subdev { 709 #if defined(CONFIG_MEDIA_CONTROLLER) 710 struct media_entity entity; 711 #endif 712 struct list_head list; 713 struct module *owner; 714 bool owner_v4l2_dev; 715 u32 flags; 716 struct v4l2_device *v4l2_dev; 717 const struct v4l2_subdev_ops *ops; 718 /* Never call these internal ops from within a driver! */ 719 const struct v4l2_subdev_internal_ops *internal_ops; 720 /* The control handler of this subdev. May be NULL. */ 721 struct v4l2_ctrl_handler *ctrl_handler; 722 /* name must be unique */ 723 char name[V4L2_SUBDEV_NAME_SIZE]; 724 /* can be used to group similar subdevs, value is driver-specific */ 725 u32 grp_id; 726 /* pointer to private data */ 727 void *dev_priv; 728 void *host_priv; 729 /* subdev device node */ 730 struct video_device *devnode; 731 /* pointer to the physical device, if any */ 732 struct device *dev; 733 /* The device_node of the subdev, usually the same as dev->of_node. */ 734 struct device_node *of_node; 735 /* Links this subdev to a global subdev_list or @notifier->done list. */ 736 struct list_head async_list; 737 /* Pointer to respective struct v4l2_async_subdev. */ 738 struct v4l2_async_subdev *asd; 739 /* Pointer to the managing notifier. */ 740 struct v4l2_async_notifier *notifier; 741 /* common part of subdevice platform data */ 742 struct v4l2_subdev_platform_data *pdata; 743 }; 744 745 #define media_entity_to_v4l2_subdev(ent) \ 746 container_of(ent, struct v4l2_subdev, entity) 747 #define vdev_to_v4l2_subdev(vdev) \ 748 ((struct v4l2_subdev *)video_get_drvdata(vdev)) 749 750 /* 751 * Used for storing subdev information per file handle 752 */ 753 struct v4l2_subdev_fh { 754 struct v4l2_fh vfh; 755 #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) 756 struct v4l2_subdev_pad_config *pad; 757 #endif 758 }; 759 760 #define to_v4l2_subdev_fh(fh) \ 761 container_of(fh, struct v4l2_subdev_fh, vfh) 762 763 #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) 764 #define __V4L2_SUBDEV_MK_GET_TRY(rtype, fun_name, field_name) \ 765 static inline struct rtype * \ 766 fun_name(struct v4l2_subdev *sd, \ 767 struct v4l2_subdev_pad_config *cfg, \ 768 unsigned int pad) \ 769 { \ 770 BUG_ON(pad >= sd->entity.num_pads); \ 771 return &cfg[pad].field_name; \ 772 } 773 774 __V4L2_SUBDEV_MK_GET_TRY(v4l2_mbus_framefmt, v4l2_subdev_get_try_format, try_fmt) 775 __V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, v4l2_subdev_get_try_crop, try_crop) 776 __V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, v4l2_subdev_get_try_compose, try_compose) 777 #endif 778 779 extern const struct v4l2_file_operations v4l2_subdev_fops; 780 781 static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p) 782 { 783 sd->dev_priv = p; 784 } 785 786 static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd) 787 { 788 return sd->dev_priv; 789 } 790 791 static inline void v4l2_set_subdev_hostdata(struct v4l2_subdev *sd, void *p) 792 { 793 sd->host_priv = p; 794 } 795 796 static inline void *v4l2_get_subdev_hostdata(const struct v4l2_subdev *sd) 797 { 798 return sd->host_priv; 799 } 800 801 #ifdef CONFIG_MEDIA_CONTROLLER 802 int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd, 803 struct media_link *link, 804 struct v4l2_subdev_format *source_fmt, 805 struct v4l2_subdev_format *sink_fmt); 806 int v4l2_subdev_link_validate(struct media_link *link); 807 808 struct v4l2_subdev_pad_config * 809 v4l2_subdev_alloc_pad_config(struct v4l2_subdev *sd); 810 void v4l2_subdev_free_pad_config(struct v4l2_subdev_pad_config *cfg); 811 #endif /* CONFIG_MEDIA_CONTROLLER */ 812 813 void v4l2_subdev_init(struct v4l2_subdev *sd, 814 const struct v4l2_subdev_ops *ops); 815 816 /* Call an ops of a v4l2_subdev, doing the right checks against 817 NULL pointers. 818 819 Example: err = v4l2_subdev_call(sd, video, s_std, norm); 820 */ 821 #define v4l2_subdev_call(sd, o, f, args...) \ 822 (!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ? \ 823 (sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD)) 824 825 #define v4l2_subdev_has_op(sd, o, f) \ 826 ((sd)->ops->o && (sd)->ops->o->f) 827 828 void v4l2_subdev_notify_event(struct v4l2_subdev *sd, 829 const struct v4l2_event *ev); 830 831 #endif 832