1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 v4l2 common internal API header 4 5 This header contains internal shared ioctl definitions for use by the 6 internal low-level v4l2 drivers. 7 Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal 8 define, 9 10 Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl> 11 12 */ 13 14 #ifndef V4L2_COMMON_H_ 15 #define V4L2_COMMON_H_ 16 17 #include <media/v4l2-dev.h> 18 19 /* Common printk constructs for v4l-i2c drivers. These macros create a unique 20 prefix consisting of the driver name, the adapter number and the i2c 21 address. */ 22 #define v4l_printk(level, name, adapter, addr, fmt, arg...) \ 23 printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg) 24 25 #define v4l_client_printk(level, client, fmt, arg...) \ 26 v4l_printk(level, (client)->dev.driver->name, (client)->adapter, \ 27 (client)->addr, fmt , ## arg) 28 29 #define v4l_err(client, fmt, arg...) \ 30 v4l_client_printk(KERN_ERR, client, fmt , ## arg) 31 32 #define v4l_warn(client, fmt, arg...) \ 33 v4l_client_printk(KERN_WARNING, client, fmt , ## arg) 34 35 #define v4l_info(client, fmt, arg...) \ 36 v4l_client_printk(KERN_INFO, client, fmt , ## arg) 37 38 /* These three macros assume that the debug level is set with a module 39 parameter called 'debug'. */ 40 #define v4l_dbg(level, debug, client, fmt, arg...) \ 41 do { \ 42 if (debug >= (level)) \ 43 v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \ 44 } while (0) 45 46 /* Add a version of v4l_dbg to be used on drivers using dev_foo() macros */ 47 #define dev_dbg_lvl(__dev, __level, __debug, __fmt, __arg...) \ 48 do { \ 49 if (__debug >= (__level)) \ 50 dev_printk(KERN_DEBUG, __dev, __fmt, ##__arg); \ 51 } while (0) 52 53 /* ------------------------------------------------------------------------- */ 54 55 /* These printk constructs can be used with v4l2_device and v4l2_subdev */ 56 #define v4l2_printk(level, dev, fmt, arg...) \ 57 printk(level "%s: " fmt, (dev)->name , ## arg) 58 59 #define v4l2_err(dev, fmt, arg...) \ 60 v4l2_printk(KERN_ERR, dev, fmt , ## arg) 61 62 #define v4l2_warn(dev, fmt, arg...) \ 63 v4l2_printk(KERN_WARNING, dev, fmt , ## arg) 64 65 #define v4l2_info(dev, fmt, arg...) \ 66 v4l2_printk(KERN_INFO, dev, fmt , ## arg) 67 68 /* These three macros assume that the debug level is set with a module 69 parameter called 'debug'. */ 70 #define v4l2_dbg(level, debug, dev, fmt, arg...) \ 71 do { \ 72 if (debug >= (level)) \ 73 v4l2_printk(KERN_DEBUG, dev, fmt , ## arg); \ 74 } while (0) 75 76 /** 77 * v4l2_ctrl_query_fill- Fill in a struct v4l2_queryctrl 78 * 79 * @qctrl: pointer to the &struct v4l2_queryctrl to be filled 80 * @min: minimum value for the control 81 * @max: maximum value for the control 82 * @step: control step 83 * @def: default value for the control 84 * 85 * Fills the &struct v4l2_queryctrl fields for the query control. 86 * 87 * .. note:: 88 * 89 * This function assumes that the @qctrl->id field is filled. 90 * 91 * Returns -EINVAL if the control is not known by the V4L2 core, 0 on success. 92 */ 93 94 int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, 95 s32 min, s32 max, s32 step, s32 def); 96 97 /* ------------------------------------------------------------------------- */ 98 99 /* I2C Helper functions */ 100 101 struct i2c_driver; 102 struct i2c_adapter; 103 struct i2c_client; 104 struct i2c_device_id; 105 struct v4l2_device; 106 struct v4l2_subdev; 107 struct v4l2_subdev_ops; 108 109 /** 110 * v4l2_i2c_new_subdev - Load an i2c module and return an initialized 111 * &struct v4l2_subdev. 112 * 113 * @v4l2_dev: pointer to &struct v4l2_device 114 * @adapter: pointer to struct i2c_adapter 115 * @client_type: name of the chip that's on the adapter. 116 * @addr: I2C address. If zero, it will use @probe_addrs 117 * @probe_addrs: array with a list of address. The last entry at such 118 * array should be %I2C_CLIENT_END. 119 * 120 * returns a &struct v4l2_subdev pointer. 121 */ 122 struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, 123 struct i2c_adapter *adapter, const char *client_type, 124 u8 addr, const unsigned short *probe_addrs); 125 126 struct i2c_board_info; 127 128 /** 129 * v4l2_i2c_new_subdev_board - Load an i2c module and return an initialized 130 * &struct v4l2_subdev. 131 * 132 * @v4l2_dev: pointer to &struct v4l2_device 133 * @adapter: pointer to struct i2c_adapter 134 * @info: pointer to struct i2c_board_info used to replace the irq, 135 * platform_data and addr arguments. 136 * @probe_addrs: array with a list of address. The last entry at such 137 * array should be %I2C_CLIENT_END. 138 * 139 * returns a &struct v4l2_subdev pointer. 140 */ 141 struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, 142 struct i2c_adapter *adapter, struct i2c_board_info *info, 143 const unsigned short *probe_addrs); 144 145 /** 146 * v4l2_i2c_subdev_set_name - Set name for an I²C sub-device 147 * 148 * @sd: pointer to &struct v4l2_subdev 149 * @client: pointer to struct i2c_client 150 * @devname: the name of the device; if NULL, the I²C device's name will be used 151 * @postfix: sub-device specific string to put right after the I²C device name; 152 * may be NULL 153 */ 154 void v4l2_i2c_subdev_set_name(struct v4l2_subdev *sd, struct i2c_client *client, 155 const char *devname, const char *postfix); 156 157 /** 158 * v4l2_i2c_subdev_init - Initializes a &struct v4l2_subdev with data from 159 * an i2c_client struct. 160 * 161 * @sd: pointer to &struct v4l2_subdev 162 * @client: pointer to struct i2c_client 163 * @ops: pointer to &struct v4l2_subdev_ops 164 */ 165 void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, 166 const struct v4l2_subdev_ops *ops); 167 168 /** 169 * v4l2_i2c_subdev_addr - returns i2c client address of &struct v4l2_subdev. 170 * 171 * @sd: pointer to &struct v4l2_subdev 172 * 173 * Returns the address of an I2C sub-device 174 */ 175 unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd); 176 177 /** 178 * enum v4l2_i2c_tuner_type - specifies the range of tuner address that 179 * should be used when seeking for I2C devices. 180 * 181 * @ADDRS_RADIO: Radio tuner addresses. 182 * Represent the following I2C addresses: 183 * 0x10 (if compiled with tea5761 support) 184 * and 0x60. 185 * @ADDRS_DEMOD: Demod tuner addresses. 186 * Represent the following I2C addresses: 187 * 0x42, 0x43, 0x4a and 0x4b. 188 * @ADDRS_TV: TV tuner addresses. 189 * Represent the following I2C addresses: 190 * 0x42, 0x43, 0x4a, 0x4b, 0x60, 0x61, 0x62, 191 * 0x63 and 0x64. 192 * @ADDRS_TV_WITH_DEMOD: TV tuner addresses if demod is present, this 193 * excludes addresses used by the demodulator 194 * from the list of candidates. 195 * Represent the following I2C addresses: 196 * 0x60, 0x61, 0x62, 0x63 and 0x64. 197 * 198 * NOTE: All I2C addresses above use the 7-bit notation. 199 */ 200 enum v4l2_i2c_tuner_type { 201 ADDRS_RADIO, 202 ADDRS_DEMOD, 203 ADDRS_TV, 204 ADDRS_TV_WITH_DEMOD, 205 }; 206 /** 207 * v4l2_i2c_tuner_addrs - Return a list of I2C tuner addresses to probe. 208 * 209 * @type: type of the tuner to seek, as defined by 210 * &enum v4l2_i2c_tuner_type. 211 * 212 * NOTE: Use only if the tuner addresses are unknown. 213 */ 214 const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type); 215 216 /* ------------------------------------------------------------------------- */ 217 218 /* SPI Helper functions */ 219 #if defined(CONFIG_SPI) 220 221 #include <linux/spi/spi.h> 222 223 struct spi_device; 224 225 /** 226 * v4l2_spi_new_subdev - Load an spi module and return an initialized 227 * &struct v4l2_subdev. 228 * 229 * 230 * @v4l2_dev: pointer to &struct v4l2_device. 231 * @master: pointer to struct spi_master. 232 * @info: pointer to struct spi_board_info. 233 * 234 * returns a &struct v4l2_subdev pointer. 235 */ 236 struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev, 237 struct spi_master *master, struct spi_board_info *info); 238 239 /** 240 * v4l2_spi_subdev_init - Initialize a v4l2_subdev with data from an 241 * spi_device struct. 242 * 243 * @sd: pointer to &struct v4l2_subdev 244 * @spi: pointer to struct spi_device. 245 * @ops: pointer to &struct v4l2_subdev_ops 246 */ 247 void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi, 248 const struct v4l2_subdev_ops *ops); 249 #endif 250 251 /* ------------------------------------------------------------------------- */ 252 253 /* 254 * FIXME: these remaining ioctls/structs should be removed as well, but they 255 * are still used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET). 256 * To remove these ioctls some more cleanup is needed in those modules. 257 * 258 * It doesn't make much sense on documenting them, as what we really want is 259 * to get rid of them. 260 */ 261 262 /* s_config */ 263 struct v4l2_priv_tun_config { 264 int tuner; 265 void *priv; 266 }; 267 #define TUNER_SET_CONFIG _IOW('d', 92, struct v4l2_priv_tun_config) 268 269 #define VIDIOC_INT_RESET _IOW ('d', 102, u32) 270 271 /* ------------------------------------------------------------------------- */ 272 273 /* Miscellaneous helper functions */ 274 275 /** 276 * v4l_bound_align_image - adjust video dimensions according to 277 * a given constraints. 278 * 279 * @width: pointer to width that will be adjusted if needed. 280 * @wmin: minimum width. 281 * @wmax: maximum width. 282 * @walign: least significant bit on width. 283 * @height: pointer to height that will be adjusted if needed. 284 * @hmin: minimum height. 285 * @hmax: maximum height. 286 * @halign: least significant bit on height. 287 * @salign: least significant bit for the image size (e. g. 288 * :math:`width * height`). 289 * 290 * Clip an image to have @width between @wmin and @wmax, and @height between 291 * @hmin and @hmax, inclusive. 292 * 293 * Additionally, the @width will be a multiple of :math:`2^{walign}`, 294 * the @height will be a multiple of :math:`2^{halign}`, and the overall 295 * size :math:`width * height` will be a multiple of :math:`2^{salign}`. 296 * 297 * .. note:: 298 * 299 * #. The clipping rectangle may be shrunk or enlarged to fit the alignment 300 * constraints. 301 * #. @wmax must not be smaller than @wmin. 302 * #. @hmax must not be smaller than @hmin. 303 * #. The alignments must not be so high there are no possible image 304 * sizes within the allowed bounds. 305 * #. @wmin and @hmin must be at least 1 (don't use 0). 306 * #. For @walign, @halign and @salign, if you don't care about a certain 307 * alignment, specify ``0``, as :math:`2^0 = 1` and one byte alignment 308 * is equivalent to no alignment. 309 * #. If you only want to adjust downward, specify a maximum that's the 310 * same as the initial value. 311 */ 312 void v4l_bound_align_image(unsigned int *width, unsigned int wmin, 313 unsigned int wmax, unsigned int walign, 314 unsigned int *height, unsigned int hmin, 315 unsigned int hmax, unsigned int halign, 316 unsigned int salign); 317 318 /** 319 * v4l2_find_nearest_size - Find the nearest size among a discrete 320 * set of resolutions contained in an array of a driver specific struct. 321 * 322 * @array: a driver specific array of image sizes 323 * @array_size: the length of the driver specific array of image sizes 324 * @width_field: the name of the width field in the driver specific struct 325 * @height_field: the name of the height field in the driver specific struct 326 * @width: desired width. 327 * @height: desired height. 328 * 329 * Finds the closest resolution to minimize the width and height differences 330 * between what requested and the supported resolutions. The size of the width 331 * and height fields in the driver specific must equal to that of u32, i.e. four 332 * bytes. 333 * 334 * Returns the best match or NULL if the length of the array is zero. 335 */ 336 #define v4l2_find_nearest_size(array, array_size, width_field, height_field, \ 337 width, height) \ 338 ({ \ 339 BUILD_BUG_ON(sizeof((array)->width_field) != sizeof(u32) || \ 340 sizeof((array)->height_field) != sizeof(u32)); \ 341 (typeof(&(array)[0]))__v4l2_find_nearest_size( \ 342 (array), array_size, sizeof(*(array)), \ 343 offsetof(typeof(*(array)), width_field), \ 344 offsetof(typeof(*(array)), height_field), \ 345 width, height); \ 346 }) 347 const void * 348 __v4l2_find_nearest_size(const void *array, size_t array_size, 349 size_t entry_size, size_t width_offset, 350 size_t height_offset, s32 width, s32 height); 351 352 /** 353 * v4l2_g_parm_cap - helper routine for vidioc_g_parm to fill this in by 354 * calling the g_frame_interval op of the given subdev. It only works 355 * for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the 356 * function name. 357 * 358 * @vdev: the struct video_device pointer. Used to determine the device caps. 359 * @sd: the sub-device pointer. 360 * @a: the VIDIOC_G_PARM argument. 361 */ 362 int v4l2_g_parm_cap(struct video_device *vdev, 363 struct v4l2_subdev *sd, struct v4l2_streamparm *a); 364 365 /** 366 * v4l2_s_parm_cap - helper routine for vidioc_s_parm to fill this in by 367 * calling the s_frame_interval op of the given subdev. It only works 368 * for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the 369 * function name. 370 * 371 * @vdev: the struct video_device pointer. Used to determine the device caps. 372 * @sd: the sub-device pointer. 373 * @a: the VIDIOC_S_PARM argument. 374 */ 375 int v4l2_s_parm_cap(struct video_device *vdev, 376 struct v4l2_subdev *sd, struct v4l2_streamparm *a); 377 378 /* Compare two v4l2_fract structs */ 379 #define V4L2_FRACT_COMPARE(a, OP, b) \ 380 ((u64)(a).numerator * (b).denominator OP \ 381 (u64)(b).numerator * (a).denominator) 382 383 /* ------------------------------------------------------------------------- */ 384 385 /* Pixel format and FourCC helpers */ 386 387 /** 388 * struct v4l2_format_info - information about a V4L2 format 389 * @format: 4CC format identifier (V4L2_PIX_FMT_*) 390 * @mem_planes: Number of memory planes, which includes the alpha plane (1 to 4). 391 * @comp_planes: Number of component planes, which includes the alpha plane (1 to 4). 392 * @bpp: Array of per-plane bytes per pixel 393 * @hdiv: Horizontal chroma subsampling factor 394 * @vdiv: Vertical chroma subsampling factor 395 * @block_w: Per-plane macroblock pixel width (optional) 396 * @block_h: Per-plane macroblock pixel height (optional) 397 */ 398 struct v4l2_format_info { 399 u32 format; 400 u8 mem_planes; 401 u8 comp_planes; 402 u8 bpp[4]; 403 u8 hdiv; 404 u8 vdiv; 405 u8 block_w[4]; 406 u8 block_h[4]; 407 }; 408 409 const struct v4l2_format_info *v4l2_format_info(u32 format); 410 411 int v4l2_fill_pixfmt(struct v4l2_pix_format *pixfmt, int pixelformat, 412 int width, int height); 413 int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt, int pixelformat, 414 int width, int height); 415 416 #endif /* V4L2_COMMON_H_ */ 417