1 /* 2 * Remote Controller core header 3 * 4 * Copyright (C) 2009-2010 by Mauro Carvalho Chehab 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation version 2 of the License. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 */ 15 16 #ifndef _RC_CORE 17 #define _RC_CORE 18 19 #include <linux/spinlock.h> 20 #include <linux/cdev.h> 21 #include <linux/kfifo.h> 22 #include <linux/time.h> 23 #include <linux/timer.h> 24 #include <media/rc-map.h> 25 26 /** 27 * enum rc_driver_type - type of the RC driver. 28 * 29 * @RC_DRIVER_SCANCODE: Driver or hardware generates a scancode. 30 * @RC_DRIVER_IR_RAW: Driver or hardware generates pulse/space sequences. 31 * It needs a Infra-Red pulse/space decoder 32 * @RC_DRIVER_IR_RAW_TX: Device transmitter only, 33 * driver requires pulse/space data sequence. 34 */ 35 enum rc_driver_type { 36 RC_DRIVER_SCANCODE = 0, 37 RC_DRIVER_IR_RAW, 38 RC_DRIVER_IR_RAW_TX, 39 }; 40 41 /** 42 * struct rc_scancode_filter - Filter scan codes. 43 * @data: Scancode data to match. 44 * @mask: Mask of bits of scancode to compare. 45 */ 46 struct rc_scancode_filter { 47 u32 data; 48 u32 mask; 49 }; 50 51 /** 52 * enum rc_filter_type - Filter type constants. 53 * @RC_FILTER_NORMAL: Filter for normal operation. 54 * @RC_FILTER_WAKEUP: Filter for waking from suspend. 55 * @RC_FILTER_MAX: Number of filter types. 56 */ 57 enum rc_filter_type { 58 RC_FILTER_NORMAL = 0, 59 RC_FILTER_WAKEUP, 60 61 RC_FILTER_MAX 62 }; 63 64 /** 65 * struct lirc_fh - represents an open lirc file 66 * @list: list of open file handles 67 * @rc: rcdev for this lirc chardev 68 * @carrier_low: when setting the carrier range, first the low end must be 69 * set with an ioctl and then the high end with another ioctl 70 * @send_timeout_reports: report timeouts in lirc raw IR. 71 * @rawir: queue for incoming raw IR 72 * @scancodes: queue for incoming decoded scancodes 73 * @wait_poll: poll struct for lirc device 74 * @send_mode: lirc mode for sending, either LIRC_MODE_SCANCODE or 75 * LIRC_MODE_PULSE 76 * @rec_mode: lirc mode for receiving, either LIRC_MODE_SCANCODE or 77 * LIRC_MODE_MODE2 78 */ 79 struct lirc_fh { 80 struct list_head list; 81 struct rc_dev *rc; 82 int carrier_low; 83 bool send_timeout_reports; 84 DECLARE_KFIFO_PTR(rawir, unsigned int); 85 DECLARE_KFIFO_PTR(scancodes, struct lirc_scancode); 86 wait_queue_head_t wait_poll; 87 u8 send_mode; 88 u8 rec_mode; 89 }; 90 91 /** 92 * struct rc_dev - represents a remote control device 93 * @dev: driver model's view of this device 94 * @managed_alloc: devm_rc_allocate_device was used to create rc_dev 95 * @sysfs_groups: sysfs attribute groups 96 * @device_name: name of the rc child device 97 * @input_phys: physical path to the input child device 98 * @input_id: id of the input child device (struct input_id) 99 * @driver_name: name of the hardware driver which registered this device 100 * @map_name: name of the default keymap 101 * @rc_map: current scan/key table 102 * @lock: used to ensure we've filled in all protocol details before 103 * anyone can call show_protocols or store_protocols 104 * @minor: unique minor remote control device number 105 * @raw: additional data for raw pulse/space devices 106 * @input_dev: the input child device used to communicate events to userspace 107 * @driver_type: specifies if protocol decoding is done in hardware or software 108 * @idle: used to keep track of RX state 109 * @encode_wakeup: wakeup filtering uses IR encode API, therefore the allowed 110 * wakeup protocols is the set of all raw encoders 111 * @allowed_protocols: bitmask with the supported RC_PROTO_BIT_* protocols 112 * @enabled_protocols: bitmask with the enabled RC_PROTO_BIT_* protocols 113 * @allowed_wakeup_protocols: bitmask with the supported RC_PROTO_BIT_* wakeup 114 * protocols 115 * @wakeup_protocol: the enabled RC_PROTO_* wakeup protocol or 116 * RC_PROTO_UNKNOWN if disabled. 117 * @scancode_filter: scancode filter 118 * @scancode_wakeup_filter: scancode wakeup filters 119 * @scancode_mask: some hardware decoders are not capable of providing the full 120 * scancode to the application. As this is a hardware limit, we can't do 121 * anything with it. Yet, as the same keycode table can be used with other 122 * devices, a mask is provided to allow its usage. Drivers should generally 123 * leave this field in blank 124 * @users: number of current users of the device 125 * @priv: driver-specific data 126 * @keylock: protects the remaining members of the struct 127 * @keypressed: whether a key is currently pressed 128 * @keyup_jiffies: time (in jiffies) when the current keypress should be released 129 * @timer_keyup: timer for releasing a keypress 130 * @timer_repeat: timer for autorepeat events. This is needed for CEC, which 131 * has non-standard repeats. 132 * @last_keycode: keycode of last keypress 133 * @last_protocol: protocol of last keypress 134 * @last_scancode: scancode of last keypress 135 * @last_toggle: toggle value of last command 136 * @timeout: optional time after which device stops sending data 137 * @min_timeout: minimum timeout supported by device 138 * @max_timeout: maximum timeout supported by device 139 * @rx_resolution : resolution (in ns) of input sampler 140 * @tx_resolution: resolution (in ns) of output sampler 141 * @lirc_dev: lirc device 142 * @lirc_cdev: lirc char cdev 143 * @gap_start: time when gap starts 144 * @gap_duration: duration of initial gap 145 * @gap: true if we're in a gap 146 * @lirc_fh_lock: protects lirc_fh list 147 * @lirc_fh: list of open files 148 * @registered: set to true by rc_register_device(), false by 149 * rc_unregister_device 150 * @change_protocol: allow changing the protocol used on hardware decoders 151 * @open: callback to allow drivers to enable polling/irq when IR input device 152 * is opened. 153 * @close: callback to allow drivers to disable polling/irq when IR input device 154 * is opened. 155 * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs) 156 * @s_tx_carrier: set transmit carrier frequency 157 * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%) 158 * @s_rx_carrier_range: inform driver about carrier it is expected to handle 159 * @tx_ir: transmit IR 160 * @s_idle: enable/disable hardware idle mode, upon which, 161 * device doesn't interrupt host until it sees IR pulses 162 * @s_learning_mode: enable wide band receiver used for learning 163 * @s_carrier_report: enable carrier reports 164 * @s_filter: set the scancode filter 165 * @s_wakeup_filter: set the wakeup scancode filter. If the mask is zero 166 * then wakeup should be disabled. wakeup_protocol will be set to 167 * a valid protocol if mask is nonzero. 168 * @s_timeout: set hardware timeout in ns 169 */ 170 struct rc_dev { 171 struct device dev; 172 bool managed_alloc; 173 const struct attribute_group *sysfs_groups[5]; 174 const char *device_name; 175 const char *input_phys; 176 struct input_id input_id; 177 const char *driver_name; 178 const char *map_name; 179 struct rc_map rc_map; 180 struct mutex lock; 181 unsigned int minor; 182 struct ir_raw_event_ctrl *raw; 183 struct input_dev *input_dev; 184 enum rc_driver_type driver_type; 185 bool idle; 186 bool encode_wakeup; 187 u64 allowed_protocols; 188 u64 enabled_protocols; 189 u64 allowed_wakeup_protocols; 190 enum rc_proto wakeup_protocol; 191 struct rc_scancode_filter scancode_filter; 192 struct rc_scancode_filter scancode_wakeup_filter; 193 u32 scancode_mask; 194 u32 users; 195 void *priv; 196 spinlock_t keylock; 197 bool keypressed; 198 unsigned long keyup_jiffies; 199 struct timer_list timer_keyup; 200 struct timer_list timer_repeat; 201 u32 last_keycode; 202 enum rc_proto last_protocol; 203 u32 last_scancode; 204 u8 last_toggle; 205 u32 timeout; 206 u32 min_timeout; 207 u32 max_timeout; 208 u32 rx_resolution; 209 u32 tx_resolution; 210 #ifdef CONFIG_LIRC 211 struct device lirc_dev; 212 struct cdev lirc_cdev; 213 ktime_t gap_start; 214 u64 gap_duration; 215 bool gap; 216 spinlock_t lirc_fh_lock; 217 struct list_head lirc_fh; 218 #endif 219 bool registered; 220 int (*change_protocol)(struct rc_dev *dev, u64 *rc_proto); 221 int (*open)(struct rc_dev *dev); 222 void (*close)(struct rc_dev *dev); 223 int (*s_tx_mask)(struct rc_dev *dev, u32 mask); 224 int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); 225 int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); 226 int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); 227 int (*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n); 228 void (*s_idle)(struct rc_dev *dev, bool enable); 229 int (*s_learning_mode)(struct rc_dev *dev, int enable); 230 int (*s_carrier_report) (struct rc_dev *dev, int enable); 231 int (*s_filter)(struct rc_dev *dev, 232 struct rc_scancode_filter *filter); 233 int (*s_wakeup_filter)(struct rc_dev *dev, 234 struct rc_scancode_filter *filter); 235 int (*s_timeout)(struct rc_dev *dev, 236 unsigned int timeout); 237 }; 238 239 #define to_rc_dev(d) container_of(d, struct rc_dev, dev) 240 241 /* 242 * From rc-main.c 243 * Those functions can be used on any type of Remote Controller. They 244 * basically creates an input_dev and properly reports the device as a 245 * Remote Controller, at sys/class/rc. 246 */ 247 248 /** 249 * rc_allocate_device - Allocates a RC device 250 * 251 * @rc_driver_type: specifies the type of the RC output to be allocated 252 * returns a pointer to struct rc_dev. 253 */ 254 struct rc_dev *rc_allocate_device(enum rc_driver_type); 255 256 /** 257 * devm_rc_allocate_device - Managed RC device allocation 258 * 259 * @dev: pointer to struct device 260 * @rc_driver_type: specifies the type of the RC output to be allocated 261 * returns a pointer to struct rc_dev. 262 */ 263 struct rc_dev *devm_rc_allocate_device(struct device *dev, enum rc_driver_type); 264 265 /** 266 * rc_free_device - Frees a RC device 267 * 268 * @dev: pointer to struct rc_dev. 269 */ 270 void rc_free_device(struct rc_dev *dev); 271 272 /** 273 * rc_register_device - Registers a RC device 274 * 275 * @dev: pointer to struct rc_dev. 276 */ 277 int rc_register_device(struct rc_dev *dev); 278 279 /** 280 * devm_rc_register_device - Manageded registering of a RC device 281 * 282 * @parent: pointer to struct device. 283 * @dev: pointer to struct rc_dev. 284 */ 285 int devm_rc_register_device(struct device *parent, struct rc_dev *dev); 286 287 /** 288 * rc_unregister_device - Unregisters a RC device 289 * 290 * @dev: pointer to struct rc_dev. 291 */ 292 void rc_unregister_device(struct rc_dev *dev); 293 294 void rc_repeat(struct rc_dev *dev); 295 void rc_keydown(struct rc_dev *dev, enum rc_proto protocol, u32 scancode, 296 u8 toggle); 297 void rc_keydown_notimeout(struct rc_dev *dev, enum rc_proto protocol, 298 u32 scancode, u8 toggle); 299 void rc_keyup(struct rc_dev *dev); 300 u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode); 301 302 /* 303 * From rc-raw.c 304 * The Raw interface is specific to InfraRed. It may be a good idea to 305 * split it later into a separate header. 306 */ 307 struct ir_raw_event { 308 union { 309 u32 duration; 310 u32 carrier; 311 }; 312 u8 duty_cycle; 313 314 unsigned pulse:1; 315 unsigned reset:1; 316 unsigned timeout:1; 317 unsigned carrier_report:1; 318 }; 319 320 #define DEFINE_IR_RAW_EVENT(event) struct ir_raw_event event = {} 321 322 static inline void init_ir_raw_event(struct ir_raw_event *ev) 323 { 324 memset(ev, 0, sizeof(*ev)); 325 } 326 327 #define IR_DEFAULT_TIMEOUT MS_TO_NS(125) 328 #define IR_MAX_DURATION 500000000 /* 500 ms */ 329 #define US_TO_NS(usec) ((usec) * 1000) 330 #define MS_TO_US(msec) ((msec) * 1000) 331 #define MS_TO_NS(msec) ((msec) * 1000 * 1000) 332 333 void ir_raw_event_handle(struct rc_dev *dev); 334 int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); 335 int ir_raw_event_store_edge(struct rc_dev *dev, bool pulse); 336 int ir_raw_event_store_with_filter(struct rc_dev *dev, 337 struct ir_raw_event *ev); 338 int ir_raw_event_store_with_timeout(struct rc_dev *dev, 339 struct ir_raw_event *ev); 340 void ir_raw_event_set_idle(struct rc_dev *dev, bool idle); 341 int ir_raw_encode_scancode(enum rc_proto protocol, u32 scancode, 342 struct ir_raw_event *events, unsigned int max); 343 int ir_raw_encode_carrier(enum rc_proto protocol); 344 345 static inline void ir_raw_event_reset(struct rc_dev *dev) 346 { 347 struct ir_raw_event ev = { .reset = true }; 348 349 ir_raw_event_store(dev, &ev); 350 dev->idle = true; 351 ir_raw_event_handle(dev); 352 } 353 354 /* extract mask bits out of data and pack them into the result */ 355 static inline u32 ir_extract_bits(u32 data, u32 mask) 356 { 357 u32 vbit = 1, value = 0; 358 359 do { 360 if (mask & 1) { 361 if (data & 1) 362 value |= vbit; 363 vbit <<= 1; 364 } 365 data >>= 1; 366 } while (mask >>= 1); 367 368 return value; 369 } 370 371 /* Get NEC scancode and protocol type from address and command bytes */ 372 static inline u32 ir_nec_bytes_to_scancode(u8 address, u8 not_address, 373 u8 command, u8 not_command, 374 enum rc_proto *protocol) 375 { 376 u32 scancode; 377 378 if ((command ^ not_command) != 0xff) { 379 /* NEC transport, but modified protocol, used by at 380 * least Apple and TiVo remotes 381 */ 382 scancode = not_address << 24 | 383 address << 16 | 384 not_command << 8 | 385 command; 386 *protocol = RC_PROTO_NEC32; 387 } else if ((address ^ not_address) != 0xff) { 388 /* Extended NEC */ 389 scancode = address << 16 | 390 not_address << 8 | 391 command; 392 *protocol = RC_PROTO_NECX; 393 } else { 394 /* Normal NEC */ 395 scancode = address << 8 | command; 396 *protocol = RC_PROTO_NEC; 397 } 398 399 return scancode; 400 } 401 402 #endif /* _RC_CORE */ 403