xref: /openbmc/linux/include/media/rc-core.h (revision 089a49b6)
1 /*
2  * Remote Controller core header
3  *
4  * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  *  it under the terms of the GNU General Public License as published by
8  *  the Free Software Foundation version 2 of the License.
9  *
10  *  This program is distributed in the hope that it will be useful,
11  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
12  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  *  GNU General Public License for more details.
14  */
15 
16 #ifndef _RC_CORE
17 #define _RC_CORE
18 
19 #include <linux/spinlock.h>
20 #include <linux/kfifo.h>
21 #include <linux/time.h>
22 #include <linux/timer.h>
23 #include <media/rc-map.h>
24 
25 extern int rc_core_debug;
26 #define IR_dprintk(level, fmt, ...)				\
27 do {								\
28 	if (rc_core_debug >= level)				\
29 		pr_debug("%s: " fmt, __func__, ##__VA_ARGS__);	\
30 } while (0)
31 
32 enum rc_driver_type {
33 	RC_DRIVER_SCANCODE = 0,	/* Driver or hardware generates a scancode */
34 	RC_DRIVER_IR_RAW,	/* Needs a Infra-Red pulse/space decoder */
35 };
36 
37 /**
38  * struct rc_dev - represents a remote control device
39  * @dev: driver model's view of this device
40  * @input_name: name of the input child device
41  * @input_phys: physical path to the input child device
42  * @input_id: id of the input child device (struct input_id)
43  * @driver_name: name of the hardware driver which registered this device
44  * @map_name: name of the default keymap
45  * @rc_map: current scan/key table
46  * @lock: used to ensure we've filled in all protocol details before
47  *	anyone can call show_protocols or store_protocols
48  * @devno: unique remote control device number
49  * @raw: additional data for raw pulse/space devices
50  * @input_dev: the input child device used to communicate events to userspace
51  * @driver_type: specifies if protocol decoding is done in hardware or software
52  * @idle: used to keep track of RX state
53  * @allowed_protos: bitmask with the supported RC_BIT_* protocols
54  * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols
55  * @scanmask: some hardware decoders are not capable of providing the full
56  *	scancode to the application. As this is a hardware limit, we can't do
57  *	anything with it. Yet, as the same keycode table can be used with other
58  *	devices, a mask is provided to allow its usage. Drivers should generally
59  *	leave this field in blank
60  * @priv: driver-specific data
61  * @keylock: protects the remaining members of the struct
62  * @keypressed: whether a key is currently pressed
63  * @keyup_jiffies: time (in jiffies) when the current keypress should be released
64  * @timer_keyup: timer for releasing a keypress
65  * @last_keycode: keycode of last keypress
66  * @last_scancode: scancode of last keypress
67  * @last_toggle: toggle value of last command
68  * @timeout: optional time after which device stops sending data
69  * @min_timeout: minimum timeout supported by device
70  * @max_timeout: maximum timeout supported by device
71  * @rx_resolution : resolution (in ns) of input sampler
72  * @tx_resolution: resolution (in ns) of output sampler
73  * @change_protocol: allow changing the protocol used on hardware decoders
74  * @open: callback to allow drivers to enable polling/irq when IR input device
75  *	is opened.
76  * @close: callback to allow drivers to disable polling/irq when IR input device
77  *	is opened.
78  * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
79  * @s_tx_carrier: set transmit carrier frequency
80  * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
81  * @s_rx_carrier: inform driver about carrier it is expected to handle
82  * @tx_ir: transmit IR
83  * @s_idle: enable/disable hardware idle mode, upon which,
84  *	device doesn't interrupt host until it sees IR pulses
85  * @s_learning_mode: enable wide band receiver used for learning
86  * @s_carrier_report: enable carrier reports
87  */
88 struct rc_dev {
89 	struct device			dev;
90 	const char			*input_name;
91 	const char			*input_phys;
92 	struct input_id			input_id;
93 	char				*driver_name;
94 	const char			*map_name;
95 	struct rc_map			rc_map;
96 	struct mutex			lock;
97 	unsigned long			devno;
98 	struct ir_raw_event_ctrl	*raw;
99 	struct input_dev		*input_dev;
100 	enum rc_driver_type		driver_type;
101 	bool				idle;
102 	u64				allowed_protos;
103 	u64				enabled_protocols;
104 	u32				users;
105 	u32				scanmask;
106 	void				*priv;
107 	spinlock_t			keylock;
108 	bool				keypressed;
109 	unsigned long			keyup_jiffies;
110 	struct timer_list		timer_keyup;
111 	u32				last_keycode;
112 	u32				last_scancode;
113 	u8				last_toggle;
114 	u32				timeout;
115 	u32				min_timeout;
116 	u32				max_timeout;
117 	u32				rx_resolution;
118 	u32				tx_resolution;
119 	int				(*change_protocol)(struct rc_dev *dev, u64 *rc_type);
120 	int				(*open)(struct rc_dev *dev);
121 	void				(*close)(struct rc_dev *dev);
122 	int				(*s_tx_mask)(struct rc_dev *dev, u32 mask);
123 	int				(*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
124 	int				(*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
125 	int				(*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
126 	int				(*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n);
127 	void				(*s_idle)(struct rc_dev *dev, bool enable);
128 	int				(*s_learning_mode)(struct rc_dev *dev, int enable);
129 	int				(*s_carrier_report) (struct rc_dev *dev, int enable);
130 };
131 
132 #define to_rc_dev(d) container_of(d, struct rc_dev, dev)
133 
134 /*
135  * From rc-main.c
136  * Those functions can be used on any type of Remote Controller. They
137  * basically creates an input_dev and properly reports the device as a
138  * Remote Controller, at sys/class/rc.
139  */
140 
141 struct rc_dev *rc_allocate_device(void);
142 void rc_free_device(struct rc_dev *dev);
143 int rc_register_device(struct rc_dev *dev);
144 void rc_unregister_device(struct rc_dev *dev);
145 
146 int rc_open(struct rc_dev *rdev);
147 void rc_close(struct rc_dev *rdev);
148 
149 void rc_repeat(struct rc_dev *dev);
150 void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle);
151 void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
152 void rc_keyup(struct rc_dev *dev);
153 u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
154 
155 /*
156  * From rc-raw.c
157  * The Raw interface is specific to InfraRed. It may be a good idea to
158  * split it later into a separate header.
159  */
160 
161 enum raw_event_type {
162 	IR_SPACE        = (1 << 0),
163 	IR_PULSE        = (1 << 1),
164 	IR_START_EVENT  = (1 << 2),
165 	IR_STOP_EVENT   = (1 << 3),
166 };
167 
168 struct ir_raw_event {
169 	union {
170 		u32             duration;
171 
172 		struct {
173 			u32     carrier;
174 			u8      duty_cycle;
175 		};
176 	};
177 
178 	unsigned                pulse:1;
179 	unsigned                reset:1;
180 	unsigned                timeout:1;
181 	unsigned                carrier_report:1;
182 };
183 
184 #define DEFINE_IR_RAW_EVENT(event) \
185 	struct ir_raw_event event = { \
186 		{ .duration = 0 } , \
187 		.pulse = 0, \
188 		.reset = 0, \
189 		.timeout = 0, \
190 		.carrier_report = 0 }
191 
192 static inline void init_ir_raw_event(struct ir_raw_event *ev)
193 {
194 	memset(ev, 0, sizeof(*ev));
195 }
196 
197 #define IR_MAX_DURATION         0xFFFFFFFF      /* a bit more than 4 seconds */
198 #define US_TO_NS(usec)		((usec) * 1000)
199 #define MS_TO_US(msec)		((msec) * 1000)
200 #define MS_TO_NS(msec)		((msec) * 1000 * 1000)
201 
202 void ir_raw_event_handle(struct rc_dev *dev);
203 int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
204 int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
205 int ir_raw_event_store_with_filter(struct rc_dev *dev,
206 				struct ir_raw_event *ev);
207 void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
208 
209 static inline void ir_raw_event_reset(struct rc_dev *dev)
210 {
211 	DEFINE_IR_RAW_EVENT(ev);
212 	ev.reset = true;
213 
214 	ir_raw_event_store(dev, &ev);
215 	ir_raw_event_handle(dev);
216 }
217 
218 /* extract mask bits out of data and pack them into the result */
219 static inline u32 ir_extract_bits(u32 data, u32 mask)
220 {
221 	u32 vbit = 1, value = 0;
222 
223 	do {
224 		if (mask & 1) {
225 			if (data & 1)
226 				value |= vbit;
227 			vbit <<= 1;
228 		}
229 		data >>= 1;
230 	} while (mask >>= 1);
231 
232 	return value;
233 }
234 
235 #endif /* _RC_CORE */
236