1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Copyright 2015-2017 Google, Inc 4 */ 5 6 #ifndef __LINUX_USB_TCPM_H 7 #define __LINUX_USB_TCPM_H 8 9 #include <linux/bitops.h> 10 #include <linux/usb/typec.h> 11 #include "pd.h" 12 13 enum typec_cc_status { 14 TYPEC_CC_OPEN, 15 TYPEC_CC_RA, 16 TYPEC_CC_RD, 17 TYPEC_CC_RP_DEF, 18 TYPEC_CC_RP_1_5, 19 TYPEC_CC_RP_3_0, 20 }; 21 22 enum typec_cc_polarity { 23 TYPEC_POLARITY_CC1, 24 TYPEC_POLARITY_CC2, 25 }; 26 27 /* Time to wait for TCPC to complete transmit */ 28 #define PD_T_TCPC_TX_TIMEOUT 100 /* in ms */ 29 #define PD_ROLE_SWAP_TIMEOUT (MSEC_PER_SEC * 10) 30 #define PD_PPS_CTRL_TIMEOUT (MSEC_PER_SEC * 10) 31 32 enum tcpm_transmit_status { 33 TCPC_TX_SUCCESS = 0, 34 TCPC_TX_DISCARDED = 1, 35 TCPC_TX_FAILED = 2, 36 }; 37 38 enum tcpm_transmit_type { 39 TCPC_TX_SOP = 0, 40 TCPC_TX_SOP_PRIME = 1, 41 TCPC_TX_SOP_PRIME_PRIME = 2, 42 TCPC_TX_SOP_DEBUG_PRIME = 3, 43 TCPC_TX_SOP_DEBUG_PRIME_PRIME = 4, 44 TCPC_TX_HARD_RESET = 5, 45 TCPC_TX_CABLE_RESET = 6, 46 TCPC_TX_BIST_MODE_2 = 7 47 }; 48 49 /* Mux state attributes */ 50 #define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */ 51 #define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */ 52 #define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */ 53 54 /** 55 * struct tcpc_dev - Port configuration and callback functions 56 * @fwnode: Pointer to port fwnode 57 * @get_vbus: Called to read current VBUS state 58 * @get_current_limit: 59 * Optional; called by the tcpm core when configured as a snk 60 * and cc=Rp-def. This allows the tcpm to provide a fallback 61 * current-limit detection method for the cc=Rp-def case. 62 * For example, some tcpcs may include BC1.2 charger detection 63 * and use that in this case. 64 * @set_cc: Called to set value of CC pins 65 * @get_cc: Called to read current CC pin values 66 * @set_polarity: 67 * Called to set polarity 68 * @set_vconn: Called to enable or disable VCONN 69 * @set_vbus: Called to enable or disable VBUS 70 * @set_current_limit: 71 * Optional; called to set current limit as negotiated 72 * with partner. 73 * @set_pd_rx: Called to enable or disable reception of PD messages 74 * @set_roles: Called to set power and data roles 75 * @start_toggling: 76 * Optional; if supported by hardware, called to start dual-role 77 * toggling or single-role connection detection. Toggling stops 78 * automatically if a connection is established. 79 * @try_role: Optional; called to set a preferred role 80 * @pd_transmit:Called to transmit PD message 81 * @set_bist_data: Turn on/off bist data mode for compliance testing 82 * @enable_frs: 83 * Optional; Called to enable/disable PD 3.0 fast role swap. 84 * Enabling frs is accessory dependent as not all PD3.0 85 * accessories support fast role swap. 86 * @frs_sourcing_vbus: 87 * Optional; Called to notify that vbus is now being sourced. 88 * Low level drivers can perform chip specific operations, if any. 89 * @enable_auto_vbus_discharge: 90 * Optional; TCPCI spec based TCPC implementations can optionally 91 * support hardware to autonomously dischrge vbus upon disconnecting 92 * as sink or source. TCPM signals TCPC to enable the mechanism upon 93 * entering connected state and signals disabling upon disconnect. 94 * @set_auto_vbus_discharge_threshold: 95 * Mandatory when enable_auto_vbus_discharge is implemented. TCPM 96 * calls this function to allow lower levels drivers to program the 97 * vbus threshold voltage below which the vbus discharge circuit 98 * will be turned on. requested_vbus_voltage is set to 0 when vbus 99 * is going to disappear knowingly i.e. during PR_SWAP and 100 * HARD_RESET etc. 101 * @is_vbus_vsafe0v: 102 * Optional; TCPCI spec based TCPC implementations are expected to 103 * detect VSAFE0V voltage level at vbus. When detection of VSAFE0V 104 * is supported by TCPC, set this callback for TCPM to query 105 * whether vbus is at VSAFE0V when needed. 106 * Returns true when vbus is at VSAFE0V, false otherwise. 107 */ 108 struct tcpc_dev { 109 struct fwnode_handle *fwnode; 110 111 int (*init)(struct tcpc_dev *dev); 112 int (*get_vbus)(struct tcpc_dev *dev); 113 int (*get_current_limit)(struct tcpc_dev *dev); 114 int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc); 115 int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1, 116 enum typec_cc_status *cc2); 117 int (*set_polarity)(struct tcpc_dev *dev, 118 enum typec_cc_polarity polarity); 119 int (*set_vconn)(struct tcpc_dev *dev, bool on); 120 int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge); 121 int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv); 122 int (*set_pd_rx)(struct tcpc_dev *dev, bool on); 123 int (*set_roles)(struct tcpc_dev *dev, bool attached, 124 enum typec_role role, enum typec_data_role data); 125 int (*start_toggling)(struct tcpc_dev *dev, 126 enum typec_port_type port_type, 127 enum typec_cc_status cc); 128 int (*try_role)(struct tcpc_dev *dev, int role); 129 int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type, 130 const struct pd_message *msg, unsigned int negotiated_rev); 131 int (*set_bist_data)(struct tcpc_dev *dev, bool on); 132 int (*enable_frs)(struct tcpc_dev *dev, bool enable); 133 void (*frs_sourcing_vbus)(struct tcpc_dev *dev); 134 int (*enable_auto_vbus_discharge)(struct tcpc_dev *dev, bool enable); 135 int (*set_auto_vbus_discharge_threshold)(struct tcpc_dev *dev, enum typec_pwr_opmode mode, 136 bool pps_active, u32 requested_vbus_voltage); 137 bool (*is_vbus_vsafe0v)(struct tcpc_dev *dev); 138 }; 139 140 struct tcpm_port; 141 142 struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc); 143 void tcpm_unregister_port(struct tcpm_port *port); 144 145 void tcpm_vbus_change(struct tcpm_port *port); 146 void tcpm_cc_change(struct tcpm_port *port); 147 void tcpm_sink_frs(struct tcpm_port *port); 148 void tcpm_sourcing_vbus(struct tcpm_port *port); 149 void tcpm_pd_receive(struct tcpm_port *port, 150 const struct pd_message *msg); 151 void tcpm_pd_transmit_complete(struct tcpm_port *port, 152 enum tcpm_transmit_status status); 153 void tcpm_pd_hard_reset(struct tcpm_port *port); 154 void tcpm_tcpc_reset(struct tcpm_port *port); 155 156 #endif /* __LINUX_USB_TCPM_H */ 157