1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _LINUX_SUSPEND_H 3 #define _LINUX_SUSPEND_H 4 5 #include <linux/swap.h> 6 #include <linux/notifier.h> 7 #include <linux/init.h> 8 #include <linux/pm.h> 9 #include <linux/mm.h> 10 #include <linux/freezer.h> 11 #include <asm/errno.h> 12 13 #ifdef CONFIG_VT 14 extern void pm_set_vt_switch(int); 15 #else 16 static inline void pm_set_vt_switch(int do_switch) 17 { 18 } 19 #endif 20 21 #ifdef CONFIG_VT_CONSOLE_SLEEP 22 extern void pm_prepare_console(void); 23 extern void pm_restore_console(void); 24 #else 25 static inline void pm_prepare_console(void) 26 { 27 } 28 29 static inline void pm_restore_console(void) 30 { 31 } 32 #endif 33 34 typedef int __bitwise suspend_state_t; 35 36 #define PM_SUSPEND_ON ((__force suspend_state_t) 0) 37 #define PM_SUSPEND_TO_IDLE ((__force suspend_state_t) 1) 38 #define PM_SUSPEND_STANDBY ((__force suspend_state_t) 2) 39 #define PM_SUSPEND_MEM ((__force suspend_state_t) 3) 40 #define PM_SUSPEND_MIN PM_SUSPEND_TO_IDLE 41 #define PM_SUSPEND_MAX ((__force suspend_state_t) 4) 42 43 enum suspend_stat_step { 44 SUSPEND_FREEZE = 1, 45 SUSPEND_PREPARE, 46 SUSPEND_SUSPEND, 47 SUSPEND_SUSPEND_LATE, 48 SUSPEND_SUSPEND_NOIRQ, 49 SUSPEND_RESUME_NOIRQ, 50 SUSPEND_RESUME_EARLY, 51 SUSPEND_RESUME 52 }; 53 54 struct suspend_stats { 55 int success; 56 int fail; 57 int failed_freeze; 58 int failed_prepare; 59 int failed_suspend; 60 int failed_suspend_late; 61 int failed_suspend_noirq; 62 int failed_resume; 63 int failed_resume_early; 64 int failed_resume_noirq; 65 #define REC_FAILED_NUM 2 66 int last_failed_dev; 67 char failed_devs[REC_FAILED_NUM][40]; 68 int last_failed_errno; 69 int errno[REC_FAILED_NUM]; 70 int last_failed_step; 71 enum suspend_stat_step failed_steps[REC_FAILED_NUM]; 72 }; 73 74 extern struct suspend_stats suspend_stats; 75 76 static inline void dpm_save_failed_dev(const char *name) 77 { 78 strlcpy(suspend_stats.failed_devs[suspend_stats.last_failed_dev], 79 name, 80 sizeof(suspend_stats.failed_devs[0])); 81 suspend_stats.last_failed_dev++; 82 suspend_stats.last_failed_dev %= REC_FAILED_NUM; 83 } 84 85 static inline void dpm_save_failed_errno(int err) 86 { 87 suspend_stats.errno[suspend_stats.last_failed_errno] = err; 88 suspend_stats.last_failed_errno++; 89 suspend_stats.last_failed_errno %= REC_FAILED_NUM; 90 } 91 92 static inline void dpm_save_failed_step(enum suspend_stat_step step) 93 { 94 suspend_stats.failed_steps[suspend_stats.last_failed_step] = step; 95 suspend_stats.last_failed_step++; 96 suspend_stats.last_failed_step %= REC_FAILED_NUM; 97 } 98 99 /** 100 * struct platform_suspend_ops - Callbacks for managing platform dependent 101 * system sleep states. 102 * 103 * @valid: Callback to determine if given system sleep state is supported by 104 * the platform. 105 * Valid (ie. supported) states are advertised in /sys/power/state. Note 106 * that it still may be impossible to enter given system sleep state if the 107 * conditions aren't right. 108 * There is the %suspend_valid_only_mem function available that can be 109 * assigned to this if the platform only supports mem sleep. 110 * 111 * @begin: Initialise a transition to given system sleep state. 112 * @begin() is executed right prior to suspending devices. The information 113 * conveyed to the platform code by @begin() should be disregarded by it as 114 * soon as @end() is executed. If @begin() fails (ie. returns nonzero), 115 * @prepare(), @enter() and @finish() will not be called by the PM core. 116 * This callback is optional. However, if it is implemented, the argument 117 * passed to @enter() is redundant and should be ignored. 118 * 119 * @prepare: Prepare the platform for entering the system sleep state indicated 120 * by @begin(). 121 * @prepare() is called right after devices have been suspended (ie. the 122 * appropriate .suspend() method has been executed for each device) and 123 * before device drivers' late suspend callbacks are executed. It returns 124 * 0 on success or a negative error code otherwise, in which case the 125 * system cannot enter the desired sleep state (@prepare_late(), @enter(), 126 * and @wake() will not be called in that case). 127 * 128 * @prepare_late: Finish preparing the platform for entering the system sleep 129 * state indicated by @begin(). 130 * @prepare_late is called before disabling nonboot CPUs and after 131 * device drivers' late suspend callbacks have been executed. It returns 132 * 0 on success or a negative error code otherwise, in which case the 133 * system cannot enter the desired sleep state (@enter() will not be 134 * executed). 135 * 136 * @enter: Enter the system sleep state indicated by @begin() or represented by 137 * the argument if @begin() is not implemented. 138 * This callback is mandatory. It returns 0 on success or a negative 139 * error code otherwise, in which case the system cannot enter the desired 140 * sleep state. 141 * 142 * @wake: Called when the system has just left a sleep state, right after 143 * the nonboot CPUs have been enabled and before device drivers' early 144 * resume callbacks are executed. 145 * This callback is optional, but should be implemented by the platforms 146 * that implement @prepare_late(). If implemented, it is always called 147 * after @prepare_late and @enter(), even if one of them fails. 148 * 149 * @finish: Finish wake-up of the platform. 150 * @finish is called right prior to calling device drivers' regular suspend 151 * callbacks. 152 * This callback is optional, but should be implemented by the platforms 153 * that implement @prepare(). If implemented, it is always called after 154 * @enter() and @wake(), even if any of them fails. It is executed after 155 * a failing @prepare. 156 * 157 * @suspend_again: Returns whether the system should suspend again (true) or 158 * not (false). If the platform wants to poll sensors or execute some 159 * code during suspended without invoking userspace and most of devices, 160 * suspend_again callback is the place assuming that periodic-wakeup or 161 * alarm-wakeup is already setup. This allows to execute some codes while 162 * being kept suspended in the view of userland and devices. 163 * 164 * @end: Called by the PM core right after resuming devices, to indicate to 165 * the platform that the system has returned to the working state or 166 * the transition to the sleep state has been aborted. 167 * This callback is optional, but should be implemented by the platforms 168 * that implement @begin(). Accordingly, platforms implementing @begin() 169 * should also provide a @end() which cleans up transitions aborted before 170 * @enter(). 171 * 172 * @recover: Recover the platform from a suspend failure. 173 * Called by the PM core if the suspending of devices fails. 174 * This callback is optional and should only be implemented by platforms 175 * which require special recovery actions in that situation. 176 */ 177 struct platform_suspend_ops { 178 int (*valid)(suspend_state_t state); 179 int (*begin)(suspend_state_t state); 180 int (*prepare)(void); 181 int (*prepare_late)(void); 182 int (*enter)(suspend_state_t state); 183 void (*wake)(void); 184 void (*finish)(void); 185 bool (*suspend_again)(void); 186 void (*end)(void); 187 void (*recover)(void); 188 }; 189 190 struct platform_s2idle_ops { 191 int (*begin)(void); 192 int (*prepare)(void); 193 int (*prepare_late)(void); 194 bool (*wake)(void); 195 void (*restore_early)(void); 196 void (*restore)(void); 197 void (*end)(void); 198 }; 199 200 #ifdef CONFIG_SUSPEND 201 extern suspend_state_t mem_sleep_current; 202 extern suspend_state_t mem_sleep_default; 203 204 /** 205 * suspend_set_ops - set platform dependent suspend operations 206 * @ops: The new suspend operations to set. 207 */ 208 extern void suspend_set_ops(const struct platform_suspend_ops *ops); 209 extern int suspend_valid_only_mem(suspend_state_t state); 210 211 extern unsigned int pm_suspend_global_flags; 212 213 #define PM_SUSPEND_FLAG_FW_SUSPEND BIT(0) 214 #define PM_SUSPEND_FLAG_FW_RESUME BIT(1) 215 #define PM_SUSPEND_FLAG_NO_PLATFORM BIT(2) 216 217 static inline void pm_suspend_clear_flags(void) 218 { 219 pm_suspend_global_flags = 0; 220 } 221 222 static inline void pm_set_suspend_via_firmware(void) 223 { 224 pm_suspend_global_flags |= PM_SUSPEND_FLAG_FW_SUSPEND; 225 } 226 227 static inline void pm_set_resume_via_firmware(void) 228 { 229 pm_suspend_global_flags |= PM_SUSPEND_FLAG_FW_RESUME; 230 } 231 232 static inline void pm_set_suspend_no_platform(void) 233 { 234 pm_suspend_global_flags |= PM_SUSPEND_FLAG_NO_PLATFORM; 235 } 236 237 /** 238 * pm_suspend_via_firmware - Check if platform firmware will suspend the system. 239 * 240 * To be called during system-wide power management transitions to sleep states 241 * or during the subsequent system-wide transitions back to the working state. 242 * 243 * Return 'true' if the platform firmware is going to be invoked at the end of 244 * the system-wide power management transition (to a sleep state) in progress in 245 * order to complete it, or if the platform firmware has been invoked in order 246 * to complete the last (or preceding) transition of the system to a sleep 247 * state. 248 * 249 * This matters if the caller needs or wants to carry out some special actions 250 * depending on whether or not control will be passed to the platform firmware 251 * subsequently (for example, the device may need to be reset before letting the 252 * platform firmware manipulate it, which is not necessary when the platform 253 * firmware is not going to be invoked) or when such special actions may have 254 * been carried out during the preceding transition of the system to a sleep 255 * state (as they may need to be taken into account). 256 */ 257 static inline bool pm_suspend_via_firmware(void) 258 { 259 return !!(pm_suspend_global_flags & PM_SUSPEND_FLAG_FW_SUSPEND); 260 } 261 262 /** 263 * pm_resume_via_firmware - Check if platform firmware has woken up the system. 264 * 265 * To be called during system-wide power management transitions from sleep 266 * states. 267 * 268 * Return 'true' if the platform firmware has passed control to the kernel at 269 * the beginning of the system-wide power management transition in progress, so 270 * the event that woke up the system from sleep has been handled by the platform 271 * firmware. 272 */ 273 static inline bool pm_resume_via_firmware(void) 274 { 275 return !!(pm_suspend_global_flags & PM_SUSPEND_FLAG_FW_RESUME); 276 } 277 278 /** 279 * pm_suspend_no_platform - Check if platform may change device power states. 280 * 281 * To be called during system-wide power management transitions to sleep states 282 * or during the subsequent system-wide transitions back to the working state. 283 * 284 * Return 'true' if the power states of devices remain under full control of the 285 * kernel throughout the system-wide suspend and resume cycle in progress (that 286 * is, if a device is put into a certain power state during suspend, it can be 287 * expected to remain in that state during resume). 288 */ 289 static inline bool pm_suspend_no_platform(void) 290 { 291 return !!(pm_suspend_global_flags & PM_SUSPEND_FLAG_NO_PLATFORM); 292 } 293 294 /* Suspend-to-idle state machnine. */ 295 enum s2idle_states { 296 S2IDLE_STATE_NONE, /* Not suspended/suspending. */ 297 S2IDLE_STATE_ENTER, /* Enter suspend-to-idle. */ 298 S2IDLE_STATE_WAKE, /* Wake up from suspend-to-idle. */ 299 }; 300 301 extern enum s2idle_states __read_mostly s2idle_state; 302 303 static inline bool idle_should_enter_s2idle(void) 304 { 305 return unlikely(s2idle_state == S2IDLE_STATE_ENTER); 306 } 307 308 extern bool pm_suspend_default_s2idle(void); 309 extern void __init pm_states_init(void); 310 extern void s2idle_set_ops(const struct platform_s2idle_ops *ops); 311 extern void s2idle_wake(void); 312 313 /** 314 * arch_suspend_disable_irqs - disable IRQs for suspend 315 * 316 * Disables IRQs (in the default case). This is a weak symbol in the common 317 * code and thus allows architectures to override it if more needs to be 318 * done. Not called for suspend to disk. 319 */ 320 extern void arch_suspend_disable_irqs(void); 321 322 /** 323 * arch_suspend_enable_irqs - enable IRQs after suspend 324 * 325 * Enables IRQs (in the default case). This is a weak symbol in the common 326 * code and thus allows architectures to override it if more needs to be 327 * done. Not called for suspend to disk. 328 */ 329 extern void arch_suspend_enable_irqs(void); 330 331 extern int pm_suspend(suspend_state_t state); 332 extern bool sync_on_suspend_enabled; 333 #else /* !CONFIG_SUSPEND */ 334 #define suspend_valid_only_mem NULL 335 336 static inline void pm_suspend_clear_flags(void) {} 337 static inline void pm_set_suspend_via_firmware(void) {} 338 static inline void pm_set_resume_via_firmware(void) {} 339 static inline bool pm_suspend_via_firmware(void) { return false; } 340 static inline bool pm_resume_via_firmware(void) { return false; } 341 static inline bool pm_suspend_no_platform(void) { return false; } 342 static inline bool pm_suspend_default_s2idle(void) { return false; } 343 344 static inline void suspend_set_ops(const struct platform_suspend_ops *ops) {} 345 static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; } 346 static inline bool sync_on_suspend_enabled(void) { return true; } 347 static inline bool idle_should_enter_s2idle(void) { return false; } 348 static inline void __init pm_states_init(void) {} 349 static inline void s2idle_set_ops(const struct platform_s2idle_ops *ops) {} 350 static inline void s2idle_wake(void) {} 351 #endif /* !CONFIG_SUSPEND */ 352 353 /* struct pbe is used for creating lists of pages that should be restored 354 * atomically during the resume from disk, because the page frames they have 355 * occupied before the suspend are in use. 356 */ 357 struct pbe { 358 void *address; /* address of the copy */ 359 void *orig_address; /* original address of a page */ 360 struct pbe *next; 361 }; 362 363 /* mm/page_alloc.c */ 364 extern void mark_free_pages(struct zone *zone); 365 366 /** 367 * struct platform_hibernation_ops - hibernation platform support 368 * 369 * The methods in this structure allow a platform to carry out special 370 * operations required by it during a hibernation transition. 371 * 372 * All the methods below, except for @recover(), must be implemented. 373 * 374 * @begin: Tell the platform driver that we're starting hibernation. 375 * Called right after shrinking memory and before freezing devices. 376 * 377 * @end: Called by the PM core right after resuming devices, to indicate to 378 * the platform that the system has returned to the working state. 379 * 380 * @pre_snapshot: Prepare the platform for creating the hibernation image. 381 * Called right after devices have been frozen and before the nonboot 382 * CPUs are disabled (runs with IRQs on). 383 * 384 * @finish: Restore the previous state of the platform after the hibernation 385 * image has been created *or* put the platform into the normal operation 386 * mode after the hibernation (the same method is executed in both cases). 387 * Called right after the nonboot CPUs have been enabled and before 388 * thawing devices (runs with IRQs on). 389 * 390 * @prepare: Prepare the platform for entering the low power state. 391 * Called right after the hibernation image has been saved and before 392 * devices are prepared for entering the low power state. 393 * 394 * @enter: Put the system into the low power state after the hibernation image 395 * has been saved to disk. 396 * Called after the nonboot CPUs have been disabled and all of the low 397 * level devices have been shut down (runs with IRQs off). 398 * 399 * @leave: Perform the first stage of the cleanup after the system sleep state 400 * indicated by @set_target() has been left. 401 * Called right after the control has been passed from the boot kernel to 402 * the image kernel, before the nonboot CPUs are enabled and before devices 403 * are resumed. Executed with interrupts disabled. 404 * 405 * @pre_restore: Prepare system for the restoration from a hibernation image. 406 * Called right after devices have been frozen and before the nonboot 407 * CPUs are disabled (runs with IRQs on). 408 * 409 * @restore_cleanup: Clean up after a failing image restoration. 410 * Called right after the nonboot CPUs have been enabled and before 411 * thawing devices (runs with IRQs on). 412 * 413 * @recover: Recover the platform from a failure to suspend devices. 414 * Called by the PM core if the suspending of devices during hibernation 415 * fails. This callback is optional and should only be implemented by 416 * platforms which require special recovery actions in that situation. 417 */ 418 struct platform_hibernation_ops { 419 int (*begin)(pm_message_t stage); 420 void (*end)(void); 421 int (*pre_snapshot)(void); 422 void (*finish)(void); 423 int (*prepare)(void); 424 int (*enter)(void); 425 void (*leave)(void); 426 int (*pre_restore)(void); 427 void (*restore_cleanup)(void); 428 void (*recover)(void); 429 }; 430 431 #ifdef CONFIG_HIBERNATION 432 /* kernel/power/snapshot.c */ 433 extern void __register_nosave_region(unsigned long b, unsigned long e, int km); 434 static inline void __init register_nosave_region(unsigned long b, unsigned long e) 435 { 436 __register_nosave_region(b, e, 0); 437 } 438 static inline void __init register_nosave_region_late(unsigned long b, unsigned long e) 439 { 440 __register_nosave_region(b, e, 1); 441 } 442 extern int swsusp_page_is_forbidden(struct page *); 443 extern void swsusp_set_page_free(struct page *); 444 extern void swsusp_unset_page_free(struct page *); 445 extern unsigned long get_safe_page(gfp_t gfp_mask); 446 extern asmlinkage int swsusp_arch_suspend(void); 447 extern asmlinkage int swsusp_arch_resume(void); 448 449 extern void hibernation_set_ops(const struct platform_hibernation_ops *ops); 450 extern int hibernate(void); 451 extern bool system_entering_hibernation(void); 452 extern bool hibernation_available(void); 453 asmlinkage int swsusp_save(void); 454 extern struct pbe *restore_pblist; 455 int pfn_is_nosave(unsigned long pfn); 456 #else /* CONFIG_HIBERNATION */ 457 static inline void register_nosave_region(unsigned long b, unsigned long e) {} 458 static inline void register_nosave_region_late(unsigned long b, unsigned long e) {} 459 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; } 460 static inline void swsusp_set_page_free(struct page *p) {} 461 static inline void swsusp_unset_page_free(struct page *p) {} 462 463 static inline void hibernation_set_ops(const struct platform_hibernation_ops *ops) {} 464 static inline int hibernate(void) { return -ENOSYS; } 465 static inline bool system_entering_hibernation(void) { return false; } 466 static inline bool hibernation_available(void) { return false; } 467 #endif /* CONFIG_HIBERNATION */ 468 469 /* Hibernation and suspend events */ 470 #define PM_HIBERNATION_PREPARE 0x0001 /* Going to hibernate */ 471 #define PM_POST_HIBERNATION 0x0002 /* Hibernation finished */ 472 #define PM_SUSPEND_PREPARE 0x0003 /* Going to suspend the system */ 473 #define PM_POST_SUSPEND 0x0004 /* Suspend finished */ 474 #define PM_RESTORE_PREPARE 0x0005 /* Going to restore a saved image */ 475 #define PM_POST_RESTORE 0x0006 /* Restore failed */ 476 477 extern struct mutex system_transition_mutex; 478 479 #ifdef CONFIG_PM_SLEEP 480 void save_processor_state(void); 481 void restore_processor_state(void); 482 483 /* kernel/power/main.c */ 484 extern int register_pm_notifier(struct notifier_block *nb); 485 extern int unregister_pm_notifier(struct notifier_block *nb); 486 extern void ksys_sync_helper(void); 487 488 #define pm_notifier(fn, pri) { \ 489 static struct notifier_block fn##_nb = \ 490 { .notifier_call = fn, .priority = pri }; \ 491 register_pm_notifier(&fn##_nb); \ 492 } 493 494 /* drivers/base/power/wakeup.c */ 495 extern bool events_check_enabled; 496 extern unsigned int pm_wakeup_irq; 497 extern suspend_state_t pm_suspend_target_state; 498 499 extern bool pm_wakeup_pending(void); 500 extern void pm_system_wakeup(void); 501 extern void pm_system_cancel_wakeup(void); 502 extern void pm_wakeup_clear(bool reset); 503 extern void pm_system_irq_wakeup(unsigned int irq_number); 504 extern bool pm_get_wakeup_count(unsigned int *count, bool block); 505 extern bool pm_save_wakeup_count(unsigned int count); 506 extern void pm_wakep_autosleep_enabled(bool set); 507 extern void pm_print_active_wakeup_sources(void); 508 509 extern void lock_system_sleep(void); 510 extern void unlock_system_sleep(void); 511 512 #else /* !CONFIG_PM_SLEEP */ 513 514 static inline int register_pm_notifier(struct notifier_block *nb) 515 { 516 return 0; 517 } 518 519 static inline int unregister_pm_notifier(struct notifier_block *nb) 520 { 521 return 0; 522 } 523 524 static inline void ksys_sync_helper(void) {} 525 526 #define pm_notifier(fn, pri) do { (void)(fn); } while (0) 527 528 static inline bool pm_wakeup_pending(void) { return false; } 529 static inline void pm_system_wakeup(void) {} 530 static inline void pm_wakeup_clear(bool reset) {} 531 static inline void pm_system_irq_wakeup(unsigned int irq_number) {} 532 533 static inline void lock_system_sleep(void) {} 534 static inline void unlock_system_sleep(void) {} 535 536 #endif /* !CONFIG_PM_SLEEP */ 537 538 #ifdef CONFIG_PM_SLEEP_DEBUG 539 extern bool pm_print_times_enabled; 540 extern bool pm_debug_messages_on; 541 extern __printf(2, 3) void __pm_pr_dbg(bool defer, const char *fmt, ...); 542 #else 543 #define pm_print_times_enabled (false) 544 #define pm_debug_messages_on (false) 545 546 #include <linux/printk.h> 547 548 #define __pm_pr_dbg(defer, fmt, ...) \ 549 no_printk(KERN_DEBUG fmt, ##__VA_ARGS__) 550 #endif 551 552 #define pm_pr_dbg(fmt, ...) \ 553 __pm_pr_dbg(false, fmt, ##__VA_ARGS__) 554 555 #define pm_deferred_pr_dbg(fmt, ...) \ 556 __pm_pr_dbg(true, fmt, ##__VA_ARGS__) 557 558 #ifdef CONFIG_PM_AUTOSLEEP 559 560 /* kernel/power/autosleep.c */ 561 void queue_up_suspend_work(void); 562 563 #else /* !CONFIG_PM_AUTOSLEEP */ 564 565 static inline void queue_up_suspend_work(void) {} 566 567 #endif /* !CONFIG_PM_AUTOSLEEP */ 568 569 #ifdef CONFIG_ARCH_SAVE_PAGE_KEYS 570 /* 571 * The ARCH_SAVE_PAGE_KEYS functions can be used by an architecture 572 * to save/restore additional information to/from the array of page 573 * frame numbers in the hibernation image. For s390 this is used to 574 * save and restore the storage key for each page that is included 575 * in the hibernation image. 576 */ 577 unsigned long page_key_additional_pages(unsigned long pages); 578 int page_key_alloc(unsigned long pages); 579 void page_key_free(void); 580 void page_key_read(unsigned long *pfn); 581 void page_key_memorize(unsigned long *pfn); 582 void page_key_write(void *address); 583 584 #else /* !CONFIG_ARCH_SAVE_PAGE_KEYS */ 585 586 static inline unsigned long page_key_additional_pages(unsigned long pages) 587 { 588 return 0; 589 } 590 591 static inline int page_key_alloc(unsigned long pages) 592 { 593 return 0; 594 } 595 596 static inline void page_key_free(void) {} 597 static inline void page_key_read(unsigned long *pfn) {} 598 static inline void page_key_memorize(unsigned long *pfn) {} 599 static inline void page_key_write(void *address) {} 600 601 #endif /* !CONFIG_ARCH_SAVE_PAGE_KEYS */ 602 603 #endif /* _LINUX_SUSPEND_H */ 604