1 /* 2 * RapidIO register definitions 3 * 4 * Copyright 2005 MontaVista Software, Inc. 5 * Matt Porter <mporter@kernel.crashing.org> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or (at your 10 * option) any later version. 11 */ 12 13 #ifndef LINUX_RIO_REGS_H 14 #define LINUX_RIO_REGS_H 15 16 /* 17 * In RapidIO, each device has a 16MB configuration space that is 18 * accessed via maintenance transactions. Portions of configuration 19 * space are standardized and/or reserved. 20 */ 21 #define RIO_MAINT_SPACE_SZ 0x1000000 /* 16MB of RapidIO mainenance space */ 22 23 #define RIO_DEV_ID_CAR 0x00 /* [I] Device Identity CAR */ 24 #define RIO_DEV_INFO_CAR 0x04 /* [I] Device Information CAR */ 25 #define RIO_ASM_ID_CAR 0x08 /* [I] Assembly Identity CAR */ 26 #define RIO_ASM_ID_MASK 0xffff0000 /* [I] Asm ID Mask */ 27 #define RIO_ASM_VEN_ID_MASK 0x0000ffff /* [I] Asm Vend Mask */ 28 29 #define RIO_ASM_INFO_CAR 0x0c /* [I] Assembly Information CAR */ 30 #define RIO_ASM_REV_MASK 0xffff0000 /* [I] Asm Rev Mask */ 31 #define RIO_EXT_FTR_PTR_MASK 0x0000ffff /* [I] EF_PTR Mask */ 32 33 #define RIO_PEF_CAR 0x10 /* [I] Processing Element Features CAR */ 34 #define RIO_PEF_BRIDGE 0x80000000 /* [I] Bridge */ 35 #define RIO_PEF_MEMORY 0x40000000 /* [I] MMIO */ 36 #define RIO_PEF_PROCESSOR 0x20000000 /* [I] Processor */ 37 #define RIO_PEF_SWITCH 0x10000000 /* [I] Switch */ 38 #define RIO_PEF_MULTIPORT 0x08000000 /* [VI, 2.1] Multiport */ 39 #define RIO_PEF_INB_MBOX 0x00f00000 /* [II, <= 1.2] Mailboxes */ 40 #define RIO_PEF_INB_MBOX0 0x00800000 /* [II, <= 1.2] Mailbox 0 */ 41 #define RIO_PEF_INB_MBOX1 0x00400000 /* [II, <= 1.2] Mailbox 1 */ 42 #define RIO_PEF_INB_MBOX2 0x00200000 /* [II, <= 1.2] Mailbox 2 */ 43 #define RIO_PEF_INB_MBOX3 0x00100000 /* [II, <= 1.2] Mailbox 3 */ 44 #define RIO_PEF_INB_DOORBELL 0x00080000 /* [II, <= 1.2] Doorbells */ 45 #define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */ 46 #define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */ 47 #define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */ 48 #define RIO_PEF_EXT_FEATURES 0x00000008 /* [I] EFT_PTR valid */ 49 #define RIO_PEF_ADDR_66 0x00000004 /* [I] 66 bits */ 50 #define RIO_PEF_ADDR_50 0x00000002 /* [I] 50 bits */ 51 #define RIO_PEF_ADDR_34 0x00000001 /* [I] 34 bits */ 52 53 #define RIO_SWP_INFO_CAR 0x14 /* [I] Switch Port Information CAR */ 54 #define RIO_SWP_INFO_PORT_TOTAL_MASK 0x0000ff00 /* [I] Total number of ports */ 55 #define RIO_SWP_INFO_PORT_NUM_MASK 0x000000ff /* [I] Maintenance transaction port number */ 56 #define RIO_GET_TOTAL_PORTS(x) ((x & RIO_SWP_INFO_PORT_TOTAL_MASK) >> 8) 57 #define RIO_GET_PORT_NUM(x) (x & RIO_SWP_INFO_PORT_NUM_MASK) 58 59 #define RIO_SRC_OPS_CAR 0x18 /* [I] Source Operations CAR */ 60 #define RIO_SRC_OPS_READ 0x00008000 /* [I] Read op */ 61 #define RIO_SRC_OPS_WRITE 0x00004000 /* [I] Write op */ 62 #define RIO_SRC_OPS_STREAM_WRITE 0x00002000 /* [I] Str-write op */ 63 #define RIO_SRC_OPS_WRITE_RESPONSE 0x00001000 /* [I] Write/resp op */ 64 #define RIO_SRC_OPS_DATA_MSG 0x00000800 /* [II] Data msg op */ 65 #define RIO_SRC_OPS_DOORBELL 0x00000400 /* [II] Doorbell op */ 66 #define RIO_SRC_OPS_ATOMIC_TST_SWP 0x00000100 /* [I] Atomic TAS op */ 67 #define RIO_SRC_OPS_ATOMIC_INC 0x00000080 /* [I] Atomic inc op */ 68 #define RIO_SRC_OPS_ATOMIC_DEC 0x00000040 /* [I] Atomic dec op */ 69 #define RIO_SRC_OPS_ATOMIC_SET 0x00000020 /* [I] Atomic set op */ 70 #define RIO_SRC_OPS_ATOMIC_CLR 0x00000010 /* [I] Atomic clr op */ 71 #define RIO_SRC_OPS_PORT_WRITE 0x00000004 /* [I] Port-write op */ 72 73 #define RIO_DST_OPS_CAR 0x1c /* Destination Operations CAR */ 74 #define RIO_DST_OPS_READ 0x00008000 /* [I] Read op */ 75 #define RIO_DST_OPS_WRITE 0x00004000 /* [I] Write op */ 76 #define RIO_DST_OPS_STREAM_WRITE 0x00002000 /* [I] Str-write op */ 77 #define RIO_DST_OPS_WRITE_RESPONSE 0x00001000 /* [I] Write/resp op */ 78 #define RIO_DST_OPS_DATA_MSG 0x00000800 /* [II] Data msg op */ 79 #define RIO_DST_OPS_DOORBELL 0x00000400 /* [II] Doorbell op */ 80 #define RIO_DST_OPS_ATOMIC_TST_SWP 0x00000100 /* [I] Atomic TAS op */ 81 #define RIO_DST_OPS_ATOMIC_INC 0x00000080 /* [I] Atomic inc op */ 82 #define RIO_DST_OPS_ATOMIC_DEC 0x00000040 /* [I] Atomic dec op */ 83 #define RIO_DST_OPS_ATOMIC_SET 0x00000020 /* [I] Atomic set op */ 84 #define RIO_DST_OPS_ATOMIC_CLR 0x00000010 /* [I] Atomic clr op */ 85 #define RIO_DST_OPS_PORT_WRITE 0x00000004 /* [I] Port-write op */ 86 87 #define RIO_OPS_READ 0x00008000 /* [I] Read op */ 88 #define RIO_OPS_WRITE 0x00004000 /* [I] Write op */ 89 #define RIO_OPS_STREAM_WRITE 0x00002000 /* [I] Str-write op */ 90 #define RIO_OPS_WRITE_RESPONSE 0x00001000 /* [I] Write/resp op */ 91 #define RIO_OPS_DATA_MSG 0x00000800 /* [II] Data msg op */ 92 #define RIO_OPS_DOORBELL 0x00000400 /* [II] Doorbell op */ 93 #define RIO_OPS_ATOMIC_TST_SWP 0x00000100 /* [I] Atomic TAS op */ 94 #define RIO_OPS_ATOMIC_INC 0x00000080 /* [I] Atomic inc op */ 95 #define RIO_OPS_ATOMIC_DEC 0x00000040 /* [I] Atomic dec op */ 96 #define RIO_OPS_ATOMIC_SET 0x00000020 /* [I] Atomic set op */ 97 #define RIO_OPS_ATOMIC_CLR 0x00000010 /* [I] Atomic clr op */ 98 #define RIO_OPS_PORT_WRITE 0x00000004 /* [I] Port-write op */ 99 100 /* 0x20-0x30 *//* Reserved */ 101 102 #define RIO_SWITCH_RT_LIMIT 0x34 /* [III, 1.3] Switch Route Table Destination ID Limit CAR */ 103 #define RIO_RT_MAX_DESTID 0x0000ffff 104 105 #define RIO_MBOX_CSR 0x40 /* [II, <= 1.2] Mailbox CSR */ 106 #define RIO_MBOX0_AVAIL 0x80000000 /* [II] Mbox 0 avail */ 107 #define RIO_MBOX0_FULL 0x40000000 /* [II] Mbox 0 full */ 108 #define RIO_MBOX0_EMPTY 0x20000000 /* [II] Mbox 0 empty */ 109 #define RIO_MBOX0_BUSY 0x10000000 /* [II] Mbox 0 busy */ 110 #define RIO_MBOX0_FAIL 0x08000000 /* [II] Mbox 0 fail */ 111 #define RIO_MBOX0_ERROR 0x04000000 /* [II] Mbox 0 error */ 112 #define RIO_MBOX1_AVAIL 0x00800000 /* [II] Mbox 1 avail */ 113 #define RIO_MBOX1_FULL 0x00200000 /* [II] Mbox 1 full */ 114 #define RIO_MBOX1_EMPTY 0x00200000 /* [II] Mbox 1 empty */ 115 #define RIO_MBOX1_BUSY 0x00100000 /* [II] Mbox 1 busy */ 116 #define RIO_MBOX1_FAIL 0x00080000 /* [II] Mbox 1 fail */ 117 #define RIO_MBOX1_ERROR 0x00040000 /* [II] Mbox 1 error */ 118 #define RIO_MBOX2_AVAIL 0x00008000 /* [II] Mbox 2 avail */ 119 #define RIO_MBOX2_FULL 0x00004000 /* [II] Mbox 2 full */ 120 #define RIO_MBOX2_EMPTY 0x00002000 /* [II] Mbox 2 empty */ 121 #define RIO_MBOX2_BUSY 0x00001000 /* [II] Mbox 2 busy */ 122 #define RIO_MBOX2_FAIL 0x00000800 /* [II] Mbox 2 fail */ 123 #define RIO_MBOX2_ERROR 0x00000400 /* [II] Mbox 2 error */ 124 #define RIO_MBOX3_AVAIL 0x00000080 /* [II] Mbox 3 avail */ 125 #define RIO_MBOX3_FULL 0x00000040 /* [II] Mbox 3 full */ 126 #define RIO_MBOX3_EMPTY 0x00000020 /* [II] Mbox 3 empty */ 127 #define RIO_MBOX3_BUSY 0x00000010 /* [II] Mbox 3 busy */ 128 #define RIO_MBOX3_FAIL 0x00000008 /* [II] Mbox 3 fail */ 129 #define RIO_MBOX3_ERROR 0x00000004 /* [II] Mbox 3 error */ 130 131 #define RIO_WRITE_PORT_CSR 0x44 /* [I, <= 1.2] Write Port CSR */ 132 #define RIO_DOORBELL_CSR 0x44 /* [II, <= 1.2] Doorbell CSR */ 133 #define RIO_DOORBELL_AVAIL 0x80000000 /* [II] Doorbell avail */ 134 #define RIO_DOORBELL_FULL 0x40000000 /* [II] Doorbell full */ 135 #define RIO_DOORBELL_EMPTY 0x20000000 /* [II] Doorbell empty */ 136 #define RIO_DOORBELL_BUSY 0x10000000 /* [II] Doorbell busy */ 137 #define RIO_DOORBELL_FAILED 0x08000000 /* [II] Doorbell failed */ 138 #define RIO_DOORBELL_ERROR 0x04000000 /* [II] Doorbell error */ 139 #define RIO_WRITE_PORT_AVAILABLE 0x00000080 /* [I] Write Port Available */ 140 #define RIO_WRITE_PORT_FULL 0x00000040 /* [I] Write Port Full */ 141 #define RIO_WRITE_PORT_EMPTY 0x00000020 /* [I] Write Port Empty */ 142 #define RIO_WRITE_PORT_BUSY 0x00000010 /* [I] Write Port Busy */ 143 #define RIO_WRITE_PORT_FAILED 0x00000008 /* [I] Write Port Failed */ 144 #define RIO_WRITE_PORT_ERROR 0x00000004 /* [I] Write Port Error */ 145 146 /* 0x48 *//* Reserved */ 147 148 #define RIO_PELL_CTRL_CSR 0x4c /* [I] PE Logical Layer Control CSR */ 149 #define RIO_PELL_ADDR_66 0x00000004 /* [I] 66-bit addr */ 150 #define RIO_PELL_ADDR_50 0x00000002 /* [I] 50-bit addr */ 151 #define RIO_PELL_ADDR_34 0x00000001 /* [I] 34-bit addr */ 152 153 /* 0x50-0x54 *//* Reserved */ 154 155 #define RIO_LCSH_BA 0x58 /* [I] LCS High Base Address */ 156 #define RIO_LCSL_BA 0x5c /* [I] LCS Base Address */ 157 158 #define RIO_DID_CSR 0x60 /* [III] Base Device ID CSR */ 159 160 /* 0x64 *//* Reserved */ 161 162 #define RIO_HOST_DID_LOCK_CSR 0x68 /* [III] Host Base Device ID Lock CSR */ 163 #define RIO_COMPONENT_TAG_CSR 0x6c /* [III] Component Tag CSR */ 164 165 #define RIO_STD_RTE_CONF_DESTID_SEL_CSR 0x70 166 #define RIO_STD_RTE_CONF_EXTCFGEN 0x80000000 167 #define RIO_STD_RTE_CONF_PORT_SEL_CSR 0x74 168 #define RIO_STD_RTE_DEFAULT_PORT 0x78 169 170 /* 0x7c-0xf8 *//* Reserved */ 171 /* 0x100-0xfff8 *//* [I] Extended Features Space */ 172 /* 0x10000-0xfffff8 *//* [I] Implementation-defined Space */ 173 174 /* 175 * Extended Features Space is a configuration space area where 176 * functionality is mapped into extended feature blocks via a 177 * singly linked list of extended feature pointers (EFT_PTR). 178 * 179 * Each extended feature block can be identified/located in 180 * Extended Features Space by walking the extended feature 181 * list starting with the Extended Feature Pointer located 182 * in the Assembly Information CAR. 183 * 184 * Extended Feature Blocks (EFBs) are identified with an assigned 185 * EFB ID. Extended feature block offsets in the definitions are 186 * relative to the offset of the EFB within the Extended Features 187 * Space. 188 */ 189 190 /* Helper macros to parse the Extended Feature Block header */ 191 #define RIO_EFB_PTR_MASK 0xffff0000 192 #define RIO_EFB_ID_MASK 0x0000ffff 193 #define RIO_GET_BLOCK_PTR(x) ((x & RIO_EFB_PTR_MASK) >> 16) 194 #define RIO_GET_BLOCK_ID(x) (x & RIO_EFB_ID_MASK) 195 196 /* Extended Feature Block IDs */ 197 #define RIO_EFB_PAR_EP_ID 0x0001 /* [IV] LP/LVDS EP Devices */ 198 #define RIO_EFB_PAR_EP_REC_ID 0x0002 /* [IV] LP/LVDS EP Recovery Devices */ 199 #define RIO_EFB_PAR_EP_FREE_ID 0x0003 /* [IV] LP/LVDS EP Free Devices */ 200 #define RIO_EFB_SER_EP_ID_V13P 0x0001 /* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */ 201 #define RIO_EFB_SER_EP_REC_ID_V13P 0x0002 /* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */ 202 #define RIO_EFB_SER_EP_FREE_ID_V13P 0x0003 /* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */ 203 #define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP/Serial EP Devices */ 204 #define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP/Serial EP Recovery Devices */ 205 #define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP/Serial EP Free Devices */ 206 #define RIO_EFB_SER_EP_FREC_ID 0x0009 /* [VI] LP/Serial EP Free Recovery Devices */ 207 #define RIO_EFB_ERR_MGMNT 0x0007 /* [VIII] Error Management Extensions */ 208 209 /* 210 * Physical 8/16 LP-LVDS 211 * ID=0x0001, Generic End Point Devices 212 * ID=0x0002, Generic End Point Devices, software assisted recovery option 213 * ID=0x0003, Generic End Point Free Devices 214 * 215 * Physical LP-Serial 216 * ID=0x0004, Generic End Point Devices 217 * ID=0x0005, Generic End Point Devices, software assisted recovery option 218 * ID=0x0006, Generic End Point Free Devices 219 */ 220 #define RIO_PORT_MNT_HEADER 0x0000 221 #define RIO_PORT_REQ_CTL_CSR 0x0020 222 #define RIO_PORT_RSP_CTL_CSR 0x0024 /* 0x0001/0x0002 */ 223 #define RIO_PORT_LINKTO_CTL_CSR 0x0020 /* Serial */ 224 #define RIO_PORT_RSPTO_CTL_CSR 0x0024 /* Serial */ 225 #define RIO_PORT_GEN_CTL_CSR 0x003c 226 #define RIO_PORT_GEN_HOST 0x80000000 227 #define RIO_PORT_GEN_MASTER 0x40000000 228 #define RIO_PORT_GEN_DISCOVERED 0x20000000 229 #define RIO_PORT_N_MNT_REQ_CSR(x) (0x0040 + x*0x20) /* 0x0002 */ 230 #define RIO_MNT_REQ_CMD_RD 0x03 /* Reset-device command */ 231 #define RIO_MNT_REQ_CMD_IS 0x04 /* Input-status command */ 232 #define RIO_PORT_N_MNT_RSP_CSR(x) (0x0044 + x*0x20) /* 0x0002 */ 233 #define RIO_PORT_N_MNT_RSP_RVAL 0x80000000 /* Response Valid */ 234 #define RIO_PORT_N_MNT_RSP_ASTAT 0x000007e0 /* ackID Status */ 235 #define RIO_PORT_N_MNT_RSP_LSTAT 0x0000001f /* Link Status */ 236 #define RIO_PORT_N_ACK_STS_CSR(x) (0x0048 + x*0x20) /* 0x0002 */ 237 #define RIO_PORT_N_ACK_CLEAR 0x80000000 238 #define RIO_PORT_N_ACK_INBOUND 0x3f000000 239 #define RIO_PORT_N_ACK_OUTSTAND 0x00003f00 240 #define RIO_PORT_N_ACK_OUTBOUND 0x0000003f 241 #define RIO_PORT_N_ERR_STS_CSR(x) (0x0058 + x*0x20) 242 #define RIO_PORT_N_ERR_STS_PW_OUT_ES 0x00010000 /* Output Error-stopped */ 243 #define RIO_PORT_N_ERR_STS_PW_INP_ES 0x00000100 /* Input Error-stopped */ 244 #define RIO_PORT_N_ERR_STS_PW_PEND 0x00000010 /* Port-Write Pending */ 245 #define RIO_PORT_N_ERR_STS_PORT_ERR 0x00000004 246 #define RIO_PORT_N_ERR_STS_PORT_OK 0x00000002 247 #define RIO_PORT_N_ERR_STS_PORT_UNINIT 0x00000001 248 #define RIO_PORT_N_CTL_CSR(x) (0x005c + x*0x20) 249 #define RIO_PORT_N_CTL_PWIDTH 0xc0000000 250 #define RIO_PORT_N_CTL_PWIDTH_1 0x00000000 251 #define RIO_PORT_N_CTL_PWIDTH_4 0x40000000 252 #define RIO_PORT_N_CTL_P_TYP_SER 0x00000001 253 #define RIO_PORT_N_CTL_LOCKOUT 0x00000002 254 #define RIO_PORT_N_CTL_EN_RX_SER 0x00200000 255 #define RIO_PORT_N_CTL_EN_TX_SER 0x00400000 256 #define RIO_PORT_N_CTL_EN_RX_PAR 0x08000000 257 #define RIO_PORT_N_CTL_EN_TX_PAR 0x40000000 258 259 /* 260 * Error Management Extensions (RapidIO 1.3+, Part 8) 261 * 262 * Extended Features Block ID=0x0007 263 */ 264 265 /* General EM Registers (Common for all Ports) */ 266 267 #define RIO_EM_EFB_HEADER 0x000 /* Error Management Extensions Block Header */ 268 #define RIO_EM_LTL_ERR_DETECT 0x008 /* Logical/Transport Layer Error Detect CSR */ 269 #define RIO_EM_LTL_ERR_EN 0x00c /* Logical/Transport Layer Error Enable CSR */ 270 #define REM_LTL_ERR_ILLTRAN 0x08000000 /* Illegal Transaction decode */ 271 #define REM_LTL_ERR_UNSOLR 0x00800000 /* Unsolicited Response */ 272 #define REM_LTL_ERR_UNSUPTR 0x00400000 /* Unsupported Transaction */ 273 #define REM_LTL_ERR_IMPSPEC 0x000000ff /* Implementation Specific */ 274 #define RIO_EM_LTL_HIADDR_CAP 0x010 /* Logical/Transport Layer High Address Capture CSR */ 275 #define RIO_EM_LTL_ADDR_CAP 0x014 /* Logical/Transport Layer Address Capture CSR */ 276 #define RIO_EM_LTL_DEVID_CAP 0x018 /* Logical/Transport Layer Device ID Capture CSR */ 277 #define RIO_EM_LTL_CTRL_CAP 0x01c /* Logical/Transport Layer Control Capture CSR */ 278 #define RIO_EM_PW_TGT_DEVID 0x028 /* Port-write Target deviceID CSR */ 279 #define RIO_EM_PKT_TTL 0x02c /* Packet Time-to-live CSR */ 280 281 /* Per-Port EM Registers */ 282 283 #define RIO_EM_PN_ERR_DETECT(x) (0x040 + x*0x40) /* Port N Error Detect CSR */ 284 #define REM_PED_IMPL_SPEC 0x80000000 285 #define REM_PED_LINK_TO 0x00000001 286 #define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */ 287 #define RIO_EM_PN_ATTRIB_CAP(x) (0x048 + x*0x40) /* Port N Attributes Capture CSR */ 288 #define RIO_EM_PN_PKT_CAP_0(x) (0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */ 289 #define RIO_EM_PN_PKT_CAP_1(x) (0x050 + x*0x40) /* Port N Packet Capture 1 CSR */ 290 #define RIO_EM_PN_PKT_CAP_2(x) (0x054 + x*0x40) /* Port N Packet Capture 2 CSR */ 291 #define RIO_EM_PN_PKT_CAP_3(x) (0x058 + x*0x40) /* Port N Packet Capture 3 CSR */ 292 #define RIO_EM_PN_ERRRATE(x) (0x068 + x*0x40) /* Port N Error Rate CSR */ 293 #define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */ 294 295 #endif /* LINUX_RIO_REGS_H */ 296