1 /*
2  * max8973-regulator.h -- MAXIM 8973 regulator
3  *
4  * Interface for regulator driver for MAXIM 8973 DC-DC step-down
5  * switching regulator.
6  *
7  * Copyright (C) 2012 NVIDIA Corporation
8 
9  * Author: Laxman Dewangan <ldewangan@nvidia.com>
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful, but WITHOUT
17  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
18  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
19  * more details.
20  *
21  * You should have received a copy of the GNU General Public License along
22  * with this program; if not, write to the Free Software Foundation, Inc.,
23  * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
24  *
25  */
26 
27 #ifndef __LINUX_REGULATOR_MAX8973_H
28 #define __LINUX_REGULATOR_MAX8973_H
29 
30 /*
31  * Control flags for configuration of the device.
32  * Client need to pass this information with ORed
33  */
34 #define MAX8973_CONTROL_REMOTE_SENSE_ENABLE			0x00000001
35 #define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE		0x00000002
36 #define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE		0x00000004
37 #define MAX8973_CONTROL_BIAS_ENABLE				0x00000008
38 #define MAX8973_CONTROL_PULL_DOWN_ENABLE			0x00000010
39 #define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE			0x00000020
40 
41 #define MAX8973_CONTROL_CLKADV_TRIP_DISABLED			0x00000000
42 #define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US			0x00010000
43 #define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US		0x00020000
44 #define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS	0x00030000
45 
46 #define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL			0x00000000
47 #define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER		0x00100000
48 #define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER		0x00200000
49 #define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER		0x00300000
50 
51 /*
52  * struct max8973_regulator_platform_data - max8973 regulator platform data.
53  *
54  * @reg_init_data: The regulator init data.
55  * @control_flags: Control flags which are ORed value of above flags to
56  *		configure device.
57  * @enable_ext_control: Enable the voltage enable/disable through external
58  *		control signal from EN input pin. If it is false then
59  *		voltage output will be enabled/disabled through EN bit of
60  *		device register.
61  * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic.
62  * @dvs_def_state: Default state of dvs. 1 if it is high else 0.
63  */
64 struct max8973_regulator_platform_data {
65 	struct regulator_init_data *reg_init_data;
66 	unsigned long control_flags;
67 	bool enable_ext_control;
68 	int dvs_gpio;
69 	unsigned dvs_def_state:1;
70 };
71 
72 #endif /* __LINUX_REGULATOR_MAX8973_H */
73