1 /* 2 * pxa2xx_ssp.h 3 * 4 * Copyright (C) 2003 Russell King, All Rights Reserved. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 * 10 * This driver supports the following PXA CPU/SSP ports:- 11 * 12 * PXA250 SSP 13 * PXA255 SSP, NSSP 14 * PXA26x SSP, NSSP, ASSP 15 * PXA27x SSP1, SSP2, SSP3 16 * PXA3xx SSP1, SSP2, SSP3, SSP4 17 */ 18 19 #ifndef __LINUX_SSP_H 20 #define __LINUX_SSP_H 21 22 #include <linux/list.h> 23 #include <linux/io.h> 24 25 /* 26 * SSP Serial Port Registers 27 * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. 28 * PXA255, PXA26x and PXA27x have extra ports, registers and bits. 29 */ 30 31 #define SSCR0 (0x00) /* SSP Control Register 0 */ 32 #define SSCR1 (0x04) /* SSP Control Register 1 */ 33 #define SSSR (0x08) /* SSP Status Register */ 34 #define SSITR (0x0C) /* SSP Interrupt Test Register */ 35 #define SSDR (0x10) /* SSP Data Write/Data Read Register */ 36 37 #define SSTO (0x28) /* SSP Time Out Register */ 38 #define SSPSP (0x2C) /* SSP Programmable Serial Protocol */ 39 #define SSTSA (0x30) /* SSP Tx Timeslot Active */ 40 #define SSRSA (0x34) /* SSP Rx Timeslot Active */ 41 #define SSTSS (0x38) /* SSP Timeslot Status */ 42 #define SSACD (0x3C) /* SSP Audio Clock Divider */ 43 #define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ 44 45 /* Common PXA2xx bits first */ 46 #define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ 47 #define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ 48 #define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ 49 #define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ 50 #define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ 51 #define SSCR0_National (0x2 << 4) /* National Microwire */ 52 #define SSCR0_ECS (1 << 6) /* External clock select */ 53 #define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ 54 #define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */ 55 56 /* PXA27x, PXA3xx */ 57 #define SSCR0_EDSS (1 << 20) /* Extended data size select */ 58 #define SSCR0_NCS (1 << 21) /* Network clock select */ 59 #define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ 60 #define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ 61 #define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ 62 #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ 63 #define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ 64 #define SSCR0_ACS (1 << 30) /* Audio clock select */ 65 #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ 66 67 68 #define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ 69 #define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ 70 #define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ 71 #define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ 72 #define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ 73 #define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ 74 75 #define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */ 76 #define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ 77 #define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ 78 #define SSSR_BSY (1 << 4) /* SSP Busy */ 79 #define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ 80 #define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ 81 #define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ 82 83 #ifdef CONFIG_ARCH_PXA 84 #define RX_THRESH_DFLT 8 85 #define TX_THRESH_DFLT 8 86 87 #define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */ 88 #define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */ 89 90 #define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ 91 #define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ 92 #define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ 93 #define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ 94 95 #else 96 97 #define RX_THRESH_DFLT 2 98 #define TX_THRESH_DFLT 2 99 100 #define SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */ 101 #define SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */ 102 103 #define SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */ 104 #define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */ 105 #define SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */ 106 #define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */ 107 #endif 108 109 /* extra bits in PXA255, PXA26x and PXA27x SSP ports */ 110 #define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ 111 #define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ 112 #define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ 113 #define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ 114 #define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ 115 #define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ 116 #define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ 117 #define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ 118 #define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ 119 #define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ 120 #define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ 121 #define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ 122 #define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ 123 #define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ 124 #define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ 125 #define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */ 126 #define SSCR1_IFS (1 << 16) /* Invert Frame Signal */ 127 #define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ 128 #define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ 129 130 #define SSSR_BCE (1 << 23) /* Bit Count Error */ 131 #define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ 132 #define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ 133 #define SSSR_EOC (1 << 20) /* End Of Chain */ 134 #define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ 135 #define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ 136 137 138 #define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ 139 #define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ 140 #define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ 141 #define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ 142 #define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ 143 #define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ 144 #define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ 145 #define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ 146 #define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ 147 148 /* PXA3xx */ 149 #define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */ 150 #define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */ 151 #define SSPSP_TIMING_MASK (0x7f8001f0) 152 153 #define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ 154 #define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ 155 #define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ 156 #define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ 157 158 enum pxa_ssp_type { 159 SSP_UNDEFINED = 0, 160 PXA25x_SSP, /* pxa 210, 250, 255, 26x */ 161 PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ 162 PXA27x_SSP, 163 PXA168_SSP, 164 CE4100_SSP, 165 }; 166 167 struct ssp_device { 168 struct platform_device *pdev; 169 struct list_head node; 170 171 struct clk *clk; 172 void __iomem *mmio_base; 173 unsigned long phys_base; 174 175 const char *label; 176 int port_id; 177 int type; 178 int use_count; 179 int irq; 180 int drcmr_rx; 181 int drcmr_tx; 182 }; 183 184 /** 185 * pxa_ssp_write_reg - Write to a SSP register 186 * 187 * @dev: SSP device to access 188 * @reg: Register to write to 189 * @val: Value to be written. 190 */ 191 static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val) 192 { 193 __raw_writel(val, dev->mmio_base + reg); 194 } 195 196 /** 197 * pxa_ssp_read_reg - Read from a SSP register 198 * 199 * @dev: SSP device to access 200 * @reg: Register to read from 201 */ 202 static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg) 203 { 204 return __raw_readl(dev->mmio_base + reg); 205 } 206 207 struct ssp_device *pxa_ssp_request(int port, const char *label); 208 void pxa_ssp_free(struct ssp_device *); 209 #endif 210