1 /*
2  * Device tables which are exported to userspace via
3  * scripts/mod/file2alias.c.  You must keep that file in sync with this
4  * header.
5  */
6 
7 #ifndef LINUX_MOD_DEVICETABLE_H
8 #define LINUX_MOD_DEVICETABLE_H
9 
10 #ifdef __KERNEL__
11 #include <linux/types.h>
12 #include <linux/uuid.h>
13 typedef unsigned long kernel_ulong_t;
14 #endif
15 
16 #define PCI_ANY_ID (~0)
17 
18 struct pci_device_id {
19 	__u32 vendor, device;		/* Vendor and device ID or PCI_ANY_ID*/
20 	__u32 subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
21 	__u32 class, class_mask;	/* (class,subclass,prog-if) triplet */
22 	kernel_ulong_t driver_data;	/* Data private to the driver */
23 };
24 
25 
26 #define IEEE1394_MATCH_VENDOR_ID	0x0001
27 #define IEEE1394_MATCH_MODEL_ID		0x0002
28 #define IEEE1394_MATCH_SPECIFIER_ID	0x0004
29 #define IEEE1394_MATCH_VERSION		0x0008
30 
31 struct ieee1394_device_id {
32 	__u32 match_flags;
33 	__u32 vendor_id;
34 	__u32 model_id;
35 	__u32 specifier_id;
36 	__u32 version;
37 	kernel_ulong_t driver_data;
38 };
39 
40 
41 /*
42  * Device table entry for "new style" table-driven USB drivers.
43  * User mode code can read these tables to choose which modules to load.
44  * Declare the table as a MODULE_DEVICE_TABLE.
45  *
46  * A probe() parameter will point to a matching entry from this table.
47  * Use the driver_info field for each match to hold information tied
48  * to that match:  device quirks, etc.
49  *
50  * Terminate the driver's table with an all-zeroes entry.
51  * Use the flag values to control which fields are compared.
52  */
53 
54 /**
55  * struct usb_device_id - identifies USB devices for probing and hotplugging
56  * @match_flags: Bit mask controlling which of the other fields are used to
57  *	match against new devices. Any field except for driver_info may be
58  *	used, although some only make sense in conjunction with other fields.
59  *	This is usually set by a USB_DEVICE_*() macro, which sets all
60  *	other fields in this structure except for driver_info.
61  * @idVendor: USB vendor ID for a device; numbers are assigned
62  *	by the USB forum to its members.
63  * @idProduct: Vendor-assigned product ID.
64  * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
65  *	This is also used to identify individual product versions, for
66  *	a range consisting of a single device.
67  * @bcdDevice_hi: High end of version number range.  The range of product
68  *	versions is inclusive.
69  * @bDeviceClass: Class of device; numbers are assigned
70  *	by the USB forum.  Products may choose to implement classes,
71  *	or be vendor-specific.  Device classes specify behavior of all
72  *	the interfaces on a device.
73  * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
74  * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
75  * @bInterfaceClass: Class of interface; numbers are assigned
76  *	by the USB forum.  Products may choose to implement classes,
77  *	or be vendor-specific.  Interface classes specify behavior only
78  *	of a given interface; other interfaces may support other classes.
79  * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
80  * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
81  * @bInterfaceNumber: Number of interface; composite devices may use
82  *	fixed interface numbers to differentiate between vendor-specific
83  *	interfaces.
84  * @driver_info: Holds information used by the driver.  Usually it holds
85  *	a pointer to a descriptor understood by the driver, or perhaps
86  *	device flags.
87  *
88  * In most cases, drivers will create a table of device IDs by using
89  * USB_DEVICE(), or similar macros designed for that purpose.
90  * They will then export it to userspace using MODULE_DEVICE_TABLE(),
91  * and provide it to the USB core through their usb_driver structure.
92  *
93  * See the usb_match_id() function for information about how matches are
94  * performed.  Briefly, you will normally use one of several macros to help
95  * construct these entries.  Each entry you provide will either identify
96  * one or more specific products, or will identify a class of products
97  * which have agreed to behave the same.  You should put the more specific
98  * matches towards the beginning of your table, so that driver_info can
99  * record quirks of specific products.
100  */
101 struct usb_device_id {
102 	/* which fields to match against? */
103 	__u16		match_flags;
104 
105 	/* Used for product specific matches; range is inclusive */
106 	__u16		idVendor;
107 	__u16		idProduct;
108 	__u16		bcdDevice_lo;
109 	__u16		bcdDevice_hi;
110 
111 	/* Used for device class matches */
112 	__u8		bDeviceClass;
113 	__u8		bDeviceSubClass;
114 	__u8		bDeviceProtocol;
115 
116 	/* Used for interface class matches */
117 	__u8		bInterfaceClass;
118 	__u8		bInterfaceSubClass;
119 	__u8		bInterfaceProtocol;
120 
121 	/* Used for vendor-specific interface matches */
122 	__u8		bInterfaceNumber;
123 
124 	/* not matched against */
125 	kernel_ulong_t	driver_info
126 		__attribute__((aligned(sizeof(kernel_ulong_t))));
127 };
128 
129 /* Some useful macros to use to create struct usb_device_id */
130 #define USB_DEVICE_ID_MATCH_VENDOR		0x0001
131 #define USB_DEVICE_ID_MATCH_PRODUCT		0x0002
132 #define USB_DEVICE_ID_MATCH_DEV_LO		0x0004
133 #define USB_DEVICE_ID_MATCH_DEV_HI		0x0008
134 #define USB_DEVICE_ID_MATCH_DEV_CLASS		0x0010
135 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS	0x0020
136 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL	0x0040
137 #define USB_DEVICE_ID_MATCH_INT_CLASS		0x0080
138 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS	0x0100
139 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL	0x0200
140 #define USB_DEVICE_ID_MATCH_INT_NUMBER		0x0400
141 
142 #define HID_ANY_ID				(~0)
143 #define HID_BUS_ANY				0xffff
144 #define HID_GROUP_ANY				0x0000
145 
146 struct hid_device_id {
147 	__u16 bus;
148 	__u16 group;
149 	__u32 vendor;
150 	__u32 product;
151 	kernel_ulong_t driver_data;
152 };
153 
154 /* s390 CCW devices */
155 struct ccw_device_id {
156 	__u16	match_flags;	/* which fields to match against */
157 
158 	__u16	cu_type;	/* control unit type     */
159 	__u16	dev_type;	/* device type           */
160 	__u8	cu_model;	/* control unit model    */
161 	__u8	dev_model;	/* device model          */
162 
163 	kernel_ulong_t driver_info;
164 };
165 
166 #define CCW_DEVICE_ID_MATCH_CU_TYPE		0x01
167 #define CCW_DEVICE_ID_MATCH_CU_MODEL		0x02
168 #define CCW_DEVICE_ID_MATCH_DEVICE_TYPE		0x04
169 #define CCW_DEVICE_ID_MATCH_DEVICE_MODEL	0x08
170 
171 /* s390 AP bus devices */
172 struct ap_device_id {
173 	__u16 match_flags;	/* which fields to match against */
174 	__u8 dev_type;		/* device type */
175 	kernel_ulong_t driver_info;
176 };
177 
178 #define AP_DEVICE_ID_MATCH_DEVICE_TYPE		0x01
179 
180 /* s390 css bus devices (subchannels) */
181 struct css_device_id {
182 	__u8 match_flags;
183 	__u8 type; /* subchannel type */
184 	kernel_ulong_t driver_data;
185 };
186 
187 #define ACPI_ID_LEN	9
188 
189 struct acpi_device_id {
190 	__u8 id[ACPI_ID_LEN];
191 	kernel_ulong_t driver_data;
192 	__u32 cls;
193 	__u32 cls_msk;
194 };
195 
196 #define PNP_ID_LEN	8
197 #define PNP_MAX_DEVICES	8
198 
199 struct pnp_device_id {
200 	__u8 id[PNP_ID_LEN];
201 	kernel_ulong_t driver_data;
202 };
203 
204 struct pnp_card_device_id {
205 	__u8 id[PNP_ID_LEN];
206 	kernel_ulong_t driver_data;
207 	struct {
208 		__u8 id[PNP_ID_LEN];
209 	} devs[PNP_MAX_DEVICES];
210 };
211 
212 
213 #define SERIO_ANY	0xff
214 
215 struct serio_device_id {
216 	__u8 type;
217 	__u8 extra;
218 	__u8 id;
219 	__u8 proto;
220 };
221 
222 struct hda_device_id {
223 	__u32 vendor_id;
224 	__u32 rev_id;
225 	__u8 api_version;
226 	const char *name;
227 	unsigned long driver_data;
228 };
229 
230 /*
231  * Struct used for matching a device
232  */
233 struct of_device_id {
234 	char	name[32];
235 	char	type[32];
236 	char	compatible[128];
237 	const void *data;
238 };
239 
240 /* VIO */
241 struct vio_device_id {
242 	char type[32];
243 	char compat[32];
244 };
245 
246 /* PCMCIA */
247 
248 struct pcmcia_device_id {
249 	__u16		match_flags;
250 
251 	__u16		manf_id;
252 	__u16 		card_id;
253 
254 	__u8  		func_id;
255 
256 	/* for real multi-function devices */
257 	__u8  		function;
258 
259 	/* for pseudo multi-function devices */
260 	__u8  		device_no;
261 
262 	__u32 		prod_id_hash[4];
263 
264 	/* not matched against in kernelspace */
265 	const char *	prod_id[4];
266 
267 	/* not matched against */
268 	kernel_ulong_t	driver_info;
269 	char *		cisfile;
270 };
271 
272 #define PCMCIA_DEV_ID_MATCH_MANF_ID	0x0001
273 #define PCMCIA_DEV_ID_MATCH_CARD_ID	0x0002
274 #define PCMCIA_DEV_ID_MATCH_FUNC_ID	0x0004
275 #define PCMCIA_DEV_ID_MATCH_FUNCTION	0x0008
276 #define PCMCIA_DEV_ID_MATCH_PROD_ID1	0x0010
277 #define PCMCIA_DEV_ID_MATCH_PROD_ID2	0x0020
278 #define PCMCIA_DEV_ID_MATCH_PROD_ID3	0x0040
279 #define PCMCIA_DEV_ID_MATCH_PROD_ID4	0x0080
280 #define PCMCIA_DEV_ID_MATCH_DEVICE_NO	0x0100
281 #define PCMCIA_DEV_ID_MATCH_FAKE_CIS	0x0200
282 #define PCMCIA_DEV_ID_MATCH_ANONYMOUS	0x0400
283 
284 /* Input */
285 #define INPUT_DEVICE_ID_EV_MAX		0x1f
286 #define INPUT_DEVICE_ID_KEY_MIN_INTERESTING	0x71
287 #define INPUT_DEVICE_ID_KEY_MAX		0x2ff
288 #define INPUT_DEVICE_ID_REL_MAX		0x0f
289 #define INPUT_DEVICE_ID_ABS_MAX		0x3f
290 #define INPUT_DEVICE_ID_MSC_MAX		0x07
291 #define INPUT_DEVICE_ID_LED_MAX		0x0f
292 #define INPUT_DEVICE_ID_SND_MAX		0x07
293 #define INPUT_DEVICE_ID_FF_MAX		0x7f
294 #define INPUT_DEVICE_ID_SW_MAX		0x0f
295 
296 #define INPUT_DEVICE_ID_MATCH_BUS	1
297 #define INPUT_DEVICE_ID_MATCH_VENDOR	2
298 #define INPUT_DEVICE_ID_MATCH_PRODUCT	4
299 #define INPUT_DEVICE_ID_MATCH_VERSION	8
300 
301 #define INPUT_DEVICE_ID_MATCH_EVBIT	0x0010
302 #define INPUT_DEVICE_ID_MATCH_KEYBIT	0x0020
303 #define INPUT_DEVICE_ID_MATCH_RELBIT	0x0040
304 #define INPUT_DEVICE_ID_MATCH_ABSBIT	0x0080
305 #define INPUT_DEVICE_ID_MATCH_MSCIT	0x0100
306 #define INPUT_DEVICE_ID_MATCH_LEDBIT	0x0200
307 #define INPUT_DEVICE_ID_MATCH_SNDBIT	0x0400
308 #define INPUT_DEVICE_ID_MATCH_FFBIT	0x0800
309 #define INPUT_DEVICE_ID_MATCH_SWBIT	0x1000
310 
311 struct input_device_id {
312 
313 	kernel_ulong_t flags;
314 
315 	__u16 bustype;
316 	__u16 vendor;
317 	__u16 product;
318 	__u16 version;
319 
320 	kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
321 	kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
322 	kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
323 	kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
324 	kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
325 	kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
326 	kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
327 	kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
328 	kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
329 
330 	kernel_ulong_t driver_info;
331 };
332 
333 /* EISA */
334 
335 #define EISA_SIG_LEN   8
336 
337 /* The EISA signature, in ASCII form, null terminated */
338 struct eisa_device_id {
339 	char          sig[EISA_SIG_LEN];
340 	kernel_ulong_t driver_data;
341 };
342 
343 #define EISA_DEVICE_MODALIAS_FMT "eisa:s%s"
344 
345 struct parisc_device_id {
346 	__u8	hw_type;	/* 5 bits used */
347 	__u8	hversion_rev;	/* 4 bits */
348 	__u16	hversion;	/* 12 bits */
349 	__u32	sversion;	/* 20 bits */
350 };
351 
352 #define PA_HWTYPE_ANY_ID	0xff
353 #define PA_HVERSION_REV_ANY_ID	0xff
354 #define PA_HVERSION_ANY_ID	0xffff
355 #define PA_SVERSION_ANY_ID	0xffffffff
356 
357 /* SDIO */
358 
359 #define SDIO_ANY_ID (~0)
360 
361 struct sdio_device_id {
362 	__u8	class;			/* Standard interface or SDIO_ANY_ID */
363 	__u16	vendor;			/* Vendor or SDIO_ANY_ID */
364 	__u16	device;			/* Device ID or SDIO_ANY_ID */
365 	kernel_ulong_t driver_data;	/* Data private to the driver */
366 };
367 
368 /* SSB core, see drivers/ssb/ */
369 struct ssb_device_id {
370 	__u16	vendor;
371 	__u16	coreid;
372 	__u8	revision;
373 	__u8	__pad;
374 } __attribute__((packed, aligned(2)));
375 #define SSB_DEVICE(_vendor, _coreid, _revision)  \
376 	{ .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
377 
378 #define SSB_ANY_VENDOR		0xFFFF
379 #define SSB_ANY_ID		0xFFFF
380 #define SSB_ANY_REV		0xFF
381 
382 /* Broadcom's specific AMBA core, see drivers/bcma/ */
383 struct bcma_device_id {
384 	__u16	manuf;
385 	__u16	id;
386 	__u8	rev;
387 	__u8	class;
388 } __attribute__((packed,aligned(2)));
389 #define BCMA_CORE(_manuf, _id, _rev, _class)  \
390 	{ .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
391 
392 #define BCMA_ANY_MANUF		0xFFFF
393 #define BCMA_ANY_ID		0xFFFF
394 #define BCMA_ANY_REV		0xFF
395 #define BCMA_ANY_CLASS		0xFF
396 
397 struct virtio_device_id {
398 	__u32 device;
399 	__u32 vendor;
400 };
401 #define VIRTIO_DEV_ANY_ID	0xffffffff
402 
403 /*
404  * For Hyper-V devices we use the device guid as the id.
405  */
406 struct hv_vmbus_device_id {
407 	__u8 guid[16];
408 	kernel_ulong_t driver_data;	/* Data private to the driver */
409 };
410 
411 /* rpmsg */
412 
413 #define RPMSG_NAME_SIZE			32
414 #define RPMSG_DEVICE_MODALIAS_FMT	"rpmsg:%s"
415 
416 struct rpmsg_device_id {
417 	char name[RPMSG_NAME_SIZE];
418 };
419 
420 /* i2c */
421 
422 #define I2C_NAME_SIZE	20
423 #define I2C_MODULE_PREFIX "i2c:"
424 
425 struct i2c_device_id {
426 	char name[I2C_NAME_SIZE];
427 	kernel_ulong_t driver_data;	/* Data private to the driver */
428 };
429 
430 /* spi */
431 
432 #define SPI_NAME_SIZE	32
433 #define SPI_MODULE_PREFIX "spi:"
434 
435 struct spi_device_id {
436 	char name[SPI_NAME_SIZE];
437 	kernel_ulong_t driver_data;	/* Data private to the driver */
438 };
439 
440 #define SPMI_NAME_SIZE	32
441 #define SPMI_MODULE_PREFIX "spmi:"
442 
443 struct spmi_device_id {
444 	char name[SPMI_NAME_SIZE];
445 	kernel_ulong_t driver_data;	/* Data private to the driver */
446 };
447 
448 /* dmi */
449 enum dmi_field {
450 	DMI_NONE,
451 	DMI_BIOS_VENDOR,
452 	DMI_BIOS_VERSION,
453 	DMI_BIOS_DATE,
454 	DMI_SYS_VENDOR,
455 	DMI_PRODUCT_NAME,
456 	DMI_PRODUCT_VERSION,
457 	DMI_PRODUCT_SERIAL,
458 	DMI_PRODUCT_UUID,
459 	DMI_BOARD_VENDOR,
460 	DMI_BOARD_NAME,
461 	DMI_BOARD_VERSION,
462 	DMI_BOARD_SERIAL,
463 	DMI_BOARD_ASSET_TAG,
464 	DMI_CHASSIS_VENDOR,
465 	DMI_CHASSIS_TYPE,
466 	DMI_CHASSIS_VERSION,
467 	DMI_CHASSIS_SERIAL,
468 	DMI_CHASSIS_ASSET_TAG,
469 	DMI_STRING_MAX,
470 };
471 
472 struct dmi_strmatch {
473 	unsigned char slot:7;
474 	unsigned char exact_match:1;
475 	char substr[79];
476 };
477 
478 struct dmi_system_id {
479 	int (*callback)(const struct dmi_system_id *);
480 	const char *ident;
481 	struct dmi_strmatch matches[4];
482 	void *driver_data;
483 };
484 /*
485  * struct dmi_device_id appears during expansion of
486  * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it
487  * but this is enough for gcc 3.4.6 to error out:
488  *	error: storage size of '__mod_dmi_device_table' isn't known
489  */
490 #define dmi_device_id dmi_system_id
491 
492 #define DMI_MATCH(a, b)	{ .slot = a, .substr = b }
493 #define DMI_EXACT_MATCH(a, b)	{ .slot = a, .substr = b, .exact_match = 1 }
494 
495 #define PLATFORM_NAME_SIZE	20
496 #define PLATFORM_MODULE_PREFIX	"platform:"
497 
498 struct platform_device_id {
499 	char name[PLATFORM_NAME_SIZE];
500 	kernel_ulong_t driver_data;
501 };
502 
503 #define MDIO_MODULE_PREFIX	"mdio:"
504 
505 #define MDIO_ID_FMT "%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d"
506 #define MDIO_ID_ARGS(_id) \
507 	(_id)>>31, ((_id)>>30) & 1, ((_id)>>29) & 1, ((_id)>>28) & 1,	\
508 	((_id)>>27) & 1, ((_id)>>26) & 1, ((_id)>>25) & 1, ((_id)>>24) & 1, \
509 	((_id)>>23) & 1, ((_id)>>22) & 1, ((_id)>>21) & 1, ((_id)>>20) & 1, \
510 	((_id)>>19) & 1, ((_id)>>18) & 1, ((_id)>>17) & 1, ((_id)>>16) & 1, \
511 	((_id)>>15) & 1, ((_id)>>14) & 1, ((_id)>>13) & 1, ((_id)>>12) & 1, \
512 	((_id)>>11) & 1, ((_id)>>10) & 1, ((_id)>>9) & 1, ((_id)>>8) & 1, \
513 	((_id)>>7) & 1, ((_id)>>6) & 1, ((_id)>>5) & 1, ((_id)>>4) & 1, \
514 	((_id)>>3) & 1, ((_id)>>2) & 1, ((_id)>>1) & 1, (_id) & 1
515 
516 /**
517  * struct mdio_device_id - identifies PHY devices on an MDIO/MII bus
518  * @phy_id: The result of
519  *     (mdio_read(&MII_PHYSID1) << 16 | mdio_read(&PHYSID2)) & @phy_id_mask
520  *     for this PHY type
521  * @phy_id_mask: Defines the significant bits of @phy_id.  A value of 0
522  *     is used to terminate an array of struct mdio_device_id.
523  */
524 struct mdio_device_id {
525 	__u32 phy_id;
526 	__u32 phy_id_mask;
527 };
528 
529 struct zorro_device_id {
530 	__u32 id;			/* Device ID or ZORRO_WILDCARD */
531 	kernel_ulong_t driver_data;	/* Data private to the driver */
532 };
533 
534 #define ZORRO_WILDCARD			(0xffffffff)	/* not official */
535 
536 #define ZORRO_DEVICE_MODALIAS_FMT	"zorro:i%08X"
537 
538 #define ISAPNP_ANY_ID		0xffff
539 struct isapnp_device_id {
540 	unsigned short card_vendor, card_device;
541 	unsigned short vendor, function;
542 	kernel_ulong_t driver_data;	/* data private to the driver */
543 };
544 
545 /**
546  * struct amba_id - identifies a device on an AMBA bus
547  * @id: The significant bits if the hardware device ID
548  * @mask: Bitmask specifying which bits of the id field are significant when
549  *	matching.  A driver binds to a device when ((hardware device ID) & mask)
550  *	== id.
551  * @data: Private data used by the driver.
552  */
553 struct amba_id {
554 	unsigned int		id;
555 	unsigned int		mask;
556 	void			*data;
557 };
558 
559 /**
560  * struct mips_cdmm_device_id - identifies devices in MIPS CDMM bus
561  * @type:	Device type identifier.
562  */
563 struct mips_cdmm_device_id {
564 	__u8	type;
565 };
566 
567 /*
568  * Match x86 CPUs for CPU specific drivers.
569  * See documentation of "x86_match_cpu" for details.
570  */
571 
572 /*
573  * MODULE_DEVICE_TABLE expects this struct to be called x86cpu_device_id.
574  * Although gcc seems to ignore this error, clang fails without this define.
575  */
576 #define x86cpu_device_id x86_cpu_id
577 struct x86_cpu_id {
578 	__u16 vendor;
579 	__u16 family;
580 	__u16 model;
581 	__u16 feature;	/* bit index */
582 	kernel_ulong_t driver_data;
583 };
584 
585 #define X86_FEATURE_MATCH(x) \
586 	{ X86_VENDOR_ANY, X86_FAMILY_ANY, X86_MODEL_ANY, x }
587 
588 #define X86_VENDOR_ANY 0xffff
589 #define X86_FAMILY_ANY 0
590 #define X86_MODEL_ANY  0
591 #define X86_FEATURE_ANY 0	/* Same as FPU, you can't test for that */
592 
593 /*
594  * Generic table type for matching CPU features.
595  * @feature:	the bit number of the feature (0 - 65535)
596  */
597 
598 struct cpu_feature {
599 	__u16	feature;
600 };
601 
602 #define IPACK_ANY_FORMAT 0xff
603 #define IPACK_ANY_ID (~0)
604 struct ipack_device_id {
605 	__u8  format;			/* Format version or IPACK_ANY_ID */
606 	__u32 vendor;			/* Vendor ID or IPACK_ANY_ID */
607 	__u32 device;			/* Device ID or IPACK_ANY_ID */
608 };
609 
610 #define MEI_CL_MODULE_PREFIX "mei:"
611 #define MEI_CL_NAME_SIZE 32
612 #define MEI_CL_VERSION_ANY 0xff
613 
614 /**
615  * struct mei_cl_device_id - MEI client device identifier
616  * @name: helper name
617  * @uuid: client uuid
618  * @version: client protocol version
619  * @driver_info: information used by the driver.
620  *
621  * identifies mei client device by uuid and name
622  */
623 struct mei_cl_device_id {
624 	char name[MEI_CL_NAME_SIZE];
625 	uuid_le uuid;
626 	__u8    version;
627 	kernel_ulong_t driver_info;
628 };
629 
630 /* RapidIO */
631 
632 #define RIO_ANY_ID	0xffff
633 
634 /**
635  * struct rio_device_id - RIO device identifier
636  * @did: RapidIO device ID
637  * @vid: RapidIO vendor ID
638  * @asm_did: RapidIO assembly device ID
639  * @asm_vid: RapidIO assembly vendor ID
640  *
641  * Identifies a RapidIO device based on both the device/vendor IDs and
642  * the assembly device/vendor IDs.
643  */
644 struct rio_device_id {
645 	__u16 did, vid;
646 	__u16 asm_did, asm_vid;
647 };
648 
649 struct mcb_device_id {
650 	__u16 device;
651 	kernel_ulong_t driver_data;
652 };
653 
654 struct ulpi_device_id {
655 	__u16 vendor;
656 	__u16 product;
657 	kernel_ulong_t driver_data;
658 };
659 
660 #endif /* LINUX_MOD_DEVICETABLE_H */
661