xref: /openbmc/linux/include/linux/mfd/si476x-core.h (revision c819e2cf)
1 /*
2  * include/media/si476x-core.h -- Common definitions for si476x core
3  * device
4  *
5  * Copyright (C) 2012 Innovative Converged Devices(ICD)
6  * Copyright (C) 2013 Andrey Smirnov
7  *
8  * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; version 2 of the License.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  */
20 
21 #ifndef SI476X_CORE_H
22 #define SI476X_CORE_H
23 
24 #include <linux/kfifo.h>
25 #include <linux/atomic.h>
26 #include <linux/i2c.h>
27 #include <linux/regmap.h>
28 #include <linux/mutex.h>
29 #include <linux/mfd/core.h>
30 #include <linux/videodev2.h>
31 #include <linux/regulator/consumer.h>
32 
33 #include <linux/mfd/si476x-platform.h>
34 #include <linux/mfd/si476x-reports.h>
35 
36 /* Command Timeouts */
37 #define SI476X_DEFAULT_TIMEOUT	100000
38 #define SI476X_TIMEOUT_TUNE	700000
39 #define SI476X_TIMEOUT_POWER_UP	330000
40 #define SI476X_STATUS_POLL_US	0
41 
42 /* -------------------- si476x-i2c.c ----------------------- */
43 
44 enum si476x_freq_supported_chips {
45 	SI476X_CHIP_SI4761 = 1,
46 	SI476X_CHIP_SI4764,
47 	SI476X_CHIP_SI4768,
48 };
49 
50 enum si476x_part_revisions {
51 	SI476X_REVISION_A10 = 0,
52 	SI476X_REVISION_A20 = 1,
53 	SI476X_REVISION_A30 = 2,
54 };
55 
56 enum si476x_mfd_cells {
57 	SI476X_RADIO_CELL = 0,
58 	SI476X_CODEC_CELL,
59 	SI476X_MFD_CELLS,
60 };
61 
62 /**
63  * enum si476x_power_state - possible power state of the si476x
64  * device.
65  *
66  * @SI476X_POWER_DOWN: In this state all regulators are turned off
67  * and the reset line is pulled low. The device is completely
68  * inactive.
69  * @SI476X_POWER_UP_FULL: In this state all the power regualtors are
70  * turned on, reset line pulled high, IRQ line is enabled(polling is
71  * active for polling use scenario) and device is turned on with
72  * POWER_UP command. The device is ready to be used.
73  * @SI476X_POWER_INCONSISTENT: This state indicates that previous
74  * power down was inconsistent, meaning some of the regulators were
75  * not turned down and thus use of the device, without power-cycling
76  * is impossible.
77  */
78 enum si476x_power_state {
79 	SI476X_POWER_DOWN		= 0,
80 	SI476X_POWER_UP_FULL		= 1,
81 	SI476X_POWER_INCONSISTENT	= 2,
82 };
83 
84 /**
85  * struct si476x_core - internal data structure representing the
86  * underlying "core" device which all the MFD cell-devices use.
87  *
88  * @client: Actual I2C client used to transfer commands to the chip.
89  * @chip_id: Last digit of the chip model(E.g. "1" for SI4761)
90  * @cells: MFD cell devices created by this driver.
91  * @cmd_lock: Mutex used to serialize all the requests to the core
92  * device. This filed should not be used directly. Instead
93  * si476x_core_lock()/si476x_core_unlock() should be used to get
94  * exclusive access to the "core" device.
95  * @users: Active users counter(Used by the radio cell)
96  * @rds_read_queue: Wait queue used to wait for RDS data.
97  * @rds_fifo: FIFO in which all the RDS data received from the chip is
98  * placed.
99  * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO.
100  * @rds_drainer_is_working: Flag used for launching only one instance
101  * of the @rds_fifo_drainer.
102  * @rds_drainer_status_lock: Lock used to guard access to the
103  * @rds_drainer_is_working variable.
104  * @command: Wait queue for wainting on the command comapletion.
105  * @cts: Clear To Send flag set upon receiving first status with CTS
106  * set.
107  * @tuning: Wait queue used for wainting for tune/seek comand
108  * completion.
109  * @stc: Similar to @cts, but for the STC bit of the status value.
110  * @power_up_parameters: Parameters used as argument for POWER_UP
111  * command when the device is started.
112  * @state: Current power state of the device.
113  * @supplues: Structure containing handles to all power supplies used
114  * by the device (NULL ones are ignored).
115  * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip.
116  * @pinmux: Chip's configurable pins configuration.
117  * @diversity_mode: Chips role when functioning in diversity mode.
118  * @status_monitor: Polling worker used in polling use case scenarion
119  * (when IRQ is not avalible).
120  * @revision: Chip's running firmware revision number(Used for correct
121  * command set support).
122  */
123 
124 struct si476x_core {
125 	struct i2c_client *client;
126 	struct regmap *regmap;
127 	int chip_id;
128 	struct mfd_cell cells[SI476X_MFD_CELLS];
129 
130 	struct mutex cmd_lock; /* for serializing fm radio operations */
131 	atomic_t users;
132 
133 	wait_queue_head_t  rds_read_queue;
134 	struct kfifo       rds_fifo;
135 	struct work_struct rds_fifo_drainer;
136 	bool               rds_drainer_is_working;
137 	struct mutex       rds_drainer_status_lock;
138 
139 	wait_queue_head_t command;
140 	atomic_t          cts;
141 
142 	wait_queue_head_t tuning;
143 	atomic_t          stc;
144 
145 	struct si476x_power_up_args power_up_parameters;
146 
147 	enum si476x_power_state power_state;
148 
149 	struct regulator_bulk_data supplies[4];
150 
151 	int gpio_reset;
152 
153 	struct si476x_pinmux pinmux;
154 	enum si476x_phase_diversity_mode diversity_mode;
155 
156 	atomic_t is_alive;
157 
158 	struct delayed_work status_monitor;
159 #define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w),	\
160 					    struct si476x_core,	\
161 					    status_monitor)
162 
163 	int revision;
164 
165 	int rds_fifo_depth;
166 };
167 
168 static inline struct si476x_core *i2c_mfd_cell_to_core(struct device *dev)
169 {
170 	struct i2c_client *client = to_i2c_client(dev->parent);
171 	return i2c_get_clientdata(client);
172 }
173 
174 
175 /**
176  * si476x_core_lock() - lock the core device to get an exclusive access
177  * to it.
178  */
179 static inline void si476x_core_lock(struct si476x_core *core)
180 {
181 	mutex_lock(&core->cmd_lock);
182 }
183 
184 /**
185  * si476x_core_unlock() - unlock the core device to relinquish an
186  * exclusive access to it.
187  */
188 static inline void si476x_core_unlock(struct si476x_core *core)
189 {
190 	mutex_unlock(&core->cmd_lock);
191 }
192 
193 /* *_TUNE_FREQ family of commands accept frequency in multiples of
194     10kHz */
195 static inline u16 hz_to_si476x(struct si476x_core *core, int freq)
196 {
197 	u16 result;
198 
199 	switch (core->power_up_parameters.func) {
200 	default:
201 	case SI476X_FUNC_FM_RECEIVER:
202 		result = freq / 10000;
203 		break;
204 	case SI476X_FUNC_AM_RECEIVER:
205 		result = freq / 1000;
206 		break;
207 	}
208 
209 	return result;
210 }
211 
212 static inline int si476x_to_hz(struct si476x_core *core, u16 freq)
213 {
214 	int result;
215 
216 	switch (core->power_up_parameters.func) {
217 	default:
218 	case SI476X_FUNC_FM_RECEIVER:
219 		result = freq * 10000;
220 		break;
221 	case SI476X_FUNC_AM_RECEIVER:
222 		result = freq * 1000;
223 		break;
224 	}
225 
226 	return result;
227 }
228 
229 /* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem
230  * mesures frequency in 62.5 Hz units */
231 
232 static inline int hz_to_v4l2(int freq)
233 {
234 	return (freq * 10) / 625;
235 }
236 
237 static inline int v4l2_to_hz(int freq)
238 {
239 	return (freq * 625) / 10;
240 }
241 
242 static inline u16 v4l2_to_si476x(struct si476x_core *core, int freq)
243 {
244 	return hz_to_si476x(core, v4l2_to_hz(freq));
245 }
246 
247 static inline int si476x_to_v4l2(struct si476x_core *core, u16 freq)
248 {
249 	return hz_to_v4l2(si476x_to_hz(core, freq));
250 }
251 
252 
253 
254 /**
255  * struct si476x_func_info - structure containing result of the
256  * FUNC_INFO command.
257  *
258  * @firmware.major: Firmware major number.
259  * @firmware.minor[...]: Firmware minor numbers.
260  * @patch_id:
261  * @func: Mode tuner is working in.
262  */
263 struct si476x_func_info {
264 	struct {
265 		u8 major, minor[2];
266 	} firmware;
267 	u16 patch_id;
268 	enum si476x_func func;
269 };
270 
271 /**
272  * struct si476x_power_down_args - structure used to pass parameters
273  * to POWER_DOWN command
274  *
275  * @xosc: true - Power down, but leav oscillator running.
276  *        false - Full power down.
277  */
278 struct si476x_power_down_args {
279 	bool xosc;
280 };
281 
282 /**
283  * enum si476x_tunemode - enum representing possible tune modes for
284  * the chip.
285  * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new
286  * channel after tune, tune status is valid.
287  * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new
288  * channel after tune, tune status invalid.
289  * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if
290  * metric thresholds are not met.
291  * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the
292  * previous channel.
293  */
294 enum si476x_tunemode {
295 	SI476X_TM_VALIDATED_NORMAL_TUNE = 0,
296 	SI476X_TM_INVALIDATED_FAST_TUNE = 1,
297 	SI476X_TM_VALIDATED_AF_TUNE     = 2,
298 	SI476X_TM_VALIDATED_AF_CHECK    = 3,
299 };
300 
301 /**
302  * enum si476x_smoothmetrics - enum containing the possible setting fo
303  * audio transitioning of the chip
304  * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this
305  * new channel
306  * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous
307  * channel values to the new values
308  */
309 enum si476x_smoothmetrics {
310 	SI476X_SM_INITIALIZE_AUDIO = 0,
311 	SI476X_SM_TRANSITION_AUDIO = 1,
312 };
313 
314 /**
315  * struct si476x_rds_status_report - the structure representing the
316  * response to 'FM_RD_STATUS' command
317  * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY)
318  * code has changed.
319  * @rdspiint: Program identification(PI) code has changed.
320  * @rdssyncint: RDS synchronization has changed.
321  * @rdsfifoint: RDS was received and the RDS FIFO has at least
322  * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it.
323  * @tpptyvalid: TP flag and PTY code are valid falg.
324  * @pivalid: PI code is valid flag.
325  * @rdssync: RDS is currently synchronized.
326  * @rdsfifolost: On or more RDS groups have been lost/discarded flag.
327  * @tp: Current channel's TP flag.
328  * @pty: Current channel's PTY code.
329  * @pi: Current channel's PI code.
330  * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if
331  * empty).
332  */
333 struct si476x_rds_status_report {
334 	bool rdstpptyint, rdspiint, rdssyncint, rdsfifoint;
335 	bool tpptyvalid, pivalid, rdssync, rdsfifolost;
336 	bool tp;
337 
338 	u8 pty;
339 	u16 pi;
340 
341 	u8 rdsfifoused;
342 	u8 ble[4];
343 
344 	struct v4l2_rds_data rds[4];
345 };
346 
347 struct si476x_rsq_status_args {
348 	bool primary;
349 	bool rsqack;
350 	bool attune;
351 	bool cancel;
352 	bool stcack;
353 };
354 
355 enum si476x_injside {
356 	SI476X_INJSIDE_AUTO	= 0,
357 	SI476X_INJSIDE_LOW	= 1,
358 	SI476X_INJSIDE_HIGH	= 2,
359 };
360 
361 struct si476x_tune_freq_args {
362 	bool zifsr;
363 	bool hd;
364 	enum si476x_injside injside;
365 	int freq;
366 	enum si476x_tunemode tunemode;
367 	enum si476x_smoothmetrics smoothmetrics;
368 	int antcap;
369 };
370 
371 int  si476x_core_stop(struct si476x_core *, bool);
372 int  si476x_core_start(struct si476x_core *, bool);
373 int  si476x_core_set_power_state(struct si476x_core *, enum si476x_power_state);
374 bool si476x_core_has_am(struct si476x_core *);
375 bool si476x_core_has_diversity(struct si476x_core *);
376 bool si476x_core_is_a_secondary_tuner(struct si476x_core *);
377 bool si476x_core_is_a_primary_tuner(struct si476x_core *);
378 bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core);
379 bool si476x_core_is_powered_up(struct si476x_core *core);
380 
381 enum si476x_i2c_type {
382 	SI476X_I2C_SEND,
383 	SI476X_I2C_RECV
384 };
385 
386 int si476x_core_i2c_xfer(struct si476x_core *,
387 			 enum si476x_i2c_type,
388 			 char *, int);
389 
390 
391 /* -------------------- si476x-cmd.c ----------------------- */
392 
393 int si476x_core_cmd_func_info(struct si476x_core *, struct si476x_func_info *);
394 int si476x_core_cmd_set_property(struct si476x_core *, u16, u16);
395 int si476x_core_cmd_get_property(struct si476x_core *, u16);
396 int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *,
397 				      enum si476x_dclk_config,
398 				      enum si476x_dfs_config,
399 				      enum si476x_dout_config,
400 				      enum si476x_xout_config);
401 int si476x_core_cmd_zif_pin_cfg(struct si476x_core *,
402 				enum si476x_iqclk_config,
403 				enum si476x_iqfs_config,
404 				enum si476x_iout_config,
405 				enum si476x_qout_config);
406 int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *,
407 					    enum si476x_icin_config,
408 					    enum si476x_icip_config,
409 					    enum si476x_icon_config,
410 					    enum si476x_icop_config);
411 int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *,
412 				      enum si476x_lrout_config);
413 int si476x_core_cmd_intb_pin_cfg(struct si476x_core *, enum si476x_intb_config,
414 				 enum si476x_a1_config);
415 int si476x_core_cmd_fm_seek_start(struct si476x_core *, bool, bool);
416 int si476x_core_cmd_am_seek_start(struct si476x_core *, bool, bool);
417 int si476x_core_cmd_fm_rds_status(struct si476x_core *, bool, bool, bool,
418 				  struct si476x_rds_status_report *);
419 int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *, bool,
420 				      struct si476x_rds_blockcount_report *);
421 int si476x_core_cmd_fm_tune_freq(struct si476x_core *,
422 				 struct si476x_tune_freq_args *);
423 int si476x_core_cmd_am_tune_freq(struct si476x_core *,
424 				 struct si476x_tune_freq_args *);
425 int si476x_core_cmd_am_rsq_status(struct si476x_core *,
426 				  struct si476x_rsq_status_args *,
427 				  struct si476x_rsq_status_report *);
428 int si476x_core_cmd_fm_rsq_status(struct si476x_core *,
429 				  struct si476x_rsq_status_args *,
430 				  struct si476x_rsq_status_report *);
431 int si476x_core_cmd_power_up(struct si476x_core *,
432 			     struct si476x_power_up_args *);
433 int si476x_core_cmd_power_down(struct si476x_core *,
434 			       struct si476x_power_down_args *);
435 int si476x_core_cmd_fm_phase_div_status(struct si476x_core *);
436 int si476x_core_cmd_fm_phase_diversity(struct si476x_core *,
437 				       enum si476x_phase_diversity_mode);
438 
439 int si476x_core_cmd_fm_acf_status(struct si476x_core *,
440 				  struct si476x_acf_status_report *);
441 int si476x_core_cmd_am_acf_status(struct si476x_core *,
442 				  struct si476x_acf_status_report *);
443 int si476x_core_cmd_agc_status(struct si476x_core *,
444 			       struct si476x_agc_status_report *);
445 
446 enum si476x_power_grid_type {
447 	SI476X_POWER_GRID_50HZ = 0,
448 	SI476X_POWER_GRID_60HZ,
449 };
450 
451 /* Properties  */
452 
453 enum si476x_interrupt_flags {
454 	SI476X_STCIEN = (1 << 0),
455 	SI476X_ACFIEN = (1 << 1),
456 	SI476X_RDSIEN = (1 << 2),
457 	SI476X_RSQIEN = (1 << 3),
458 
459 	SI476X_ERRIEN = (1 << 6),
460 	SI476X_CTSIEN = (1 << 7),
461 
462 	SI476X_STCREP = (1 << 8),
463 	SI476X_ACFREP = (1 << 9),
464 	SI476X_RDSREP = (1 << 10),
465 	SI476X_RSQREP = (1 << 11),
466 };
467 
468 enum si476x_rdsint_sources {
469 	SI476X_RDSTPPTY = (1 << 4),
470 	SI476X_RDSPI    = (1 << 3),
471 	SI476X_RDSSYNC	= (1 << 1),
472 	SI476X_RDSRECV	= (1 << 0),
473 };
474 
475 enum si476x_status_response_bits {
476 	SI476X_CTS	  = (1 << 7),
477 	SI476X_ERR	  = (1 << 6),
478 	/* Status response for WB receiver */
479 	SI476X_WB_ASQ_INT = (1 << 4),
480 	SI476X_RSQ_INT    = (1 << 3),
481 	/* Status response for FM receiver */
482 	SI476X_FM_RDS_INT = (1 << 2),
483 	SI476X_ACF_INT    = (1 << 1),
484 	SI476X_STC_INT    = (1 << 0),
485 };
486 
487 /* -------------------- si476x-prop.c ----------------------- */
488 
489 enum si476x_common_receiver_properties {
490 	SI476X_PROP_INT_CTL_ENABLE			= 0x0000,
491 	SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE	= 0x0200,
492 	SI476X_PROP_DIGITAL_IO_INPUT_FORMAT		= 0x0201,
493 	SI476X_PROP_DIGITAL_IO_OUTPUT_SAMPLE_RATE	= 0x0202,
494 	SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT		= 0x0203,
495 
496 	SI476X_PROP_SEEK_BAND_BOTTOM			= 0x1100,
497 	SI476X_PROP_SEEK_BAND_TOP			= 0x1101,
498 	SI476X_PROP_SEEK_FREQUENCY_SPACING		= 0x1102,
499 
500 	SI476X_PROP_VALID_MAX_TUNE_ERROR		= 0x2000,
501 	SI476X_PROP_VALID_SNR_THRESHOLD			= 0x2003,
502 	SI476X_PROP_VALID_RSSI_THRESHOLD		= 0x2004,
503 };
504 
505 enum si476x_am_receiver_properties {
506 	SI476X_PROP_AUDIO_PWR_LINE_FILTER		= 0x0303,
507 };
508 
509 enum si476x_fm_receiver_properties {
510 	SI476X_PROP_AUDIO_DEEMPHASIS			= 0x0302,
511 
512 	SI476X_PROP_FM_RDS_INTERRUPT_SOURCE		= 0x4000,
513 	SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT		= 0x4001,
514 	SI476X_PROP_FM_RDS_CONFIG			= 0x4002,
515 };
516 
517 enum si476x_prop_audio_pwr_line_filter_bits {
518 	SI476X_PROP_PWR_HARMONICS_MASK	= 0x001f,
519 	SI476X_PROP_PWR_GRID_MASK	= 0x0100,
520 	SI476X_PROP_PWR_ENABLE_MASK	= 0x0200,
521 	SI476X_PROP_PWR_GRID_50HZ	= 0x0000,
522 	SI476X_PROP_PWR_GRID_60HZ	= 0x0100,
523 };
524 
525 enum si476x_prop_fm_rds_config_bits {
526 	SI476X_PROP_RDSEN_MASK	= 0x1,
527 	SI476X_PROP_RDSEN	= 0x1,
528 };
529 
530 
531 struct regmap *devm_regmap_init_si476x(struct si476x_core *);
532 
533 #endif	/* SI476X_CORE_H */
534