1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* header file for DIO boards for the HP300 architecture. 3 * Maybe this should handle DIO-II later? 4 * The general structure of this is vaguely based on how 5 * the Amiga port handles Zorro boards. 6 * Copyright (C) Peter Maydell 05/1998 <pmaydell@chiark.greenend.org.uk> 7 * Converted to driver model Jochen Friedrich <jochen@scram.de> 8 * 9 * The board IDs are from the NetBSD kernel, which for once provided 10 * helpful comments... 11 * 12 * This goes with drivers/dio/dio.c 13 */ 14 15 #ifndef _LINUX_DIO_H 16 #define _LINUX_DIO_H 17 18 /* The DIO boards in a system are distinguished by 'select codes' which 19 * range from 0-63 (DIO) and 132-255 (DIO-II). 20 * The DIO board with select code sc is located at physical address 21 * 0x600000 + sc * 0x10000 22 * So DIO cards cover [0x600000-0x800000); the areas [0x200000-0x400000) and 23 * [0x800000-0x1000000) are for additional space required by things 24 * like framebuffers. [0x400000-0x600000) is for miscellaneous internal I/O. 25 * On Linux, this is currently all mapped into the virtual address space 26 * at 0xf0000000 on bootup. 27 * DIO-II boards are at 0x1000000 + (sc - 132) * 0x400000 28 * which is address range [0x1000000-0x20000000) -- too big to map completely, 29 * so currently we just don't handle DIO-II boards. It wouldn't be hard to 30 * do with ioremap() though. 31 */ 32 33 #include <linux/device.h> 34 35 #ifdef __KERNEL__ 36 37 #include <asm/hp300hw.h> 38 39 typedef __u16 dio_id; 40 41 /* 42 * DIO devices 43 */ 44 45 struct dio_dev { 46 struct dio_bus *bus; 47 dio_id id; 48 int scode; 49 struct dio_driver *driver; /* which driver has allocated this device */ 50 struct device dev; /* Generic device interface */ 51 u8 ipl; 52 char name[64]; 53 struct resource resource; 54 }; 55 56 #define to_dio_dev(n) container_of(n, struct dio_dev, dev) 57 58 /* 59 * DIO bus 60 */ 61 62 struct dio_bus { 63 struct list_head devices; /* list of devices on this bus */ 64 unsigned int num_resources; /* number of resources */ 65 struct resource resources[2]; /* address space routed to this bus */ 66 struct device dev; 67 char name[10]; 68 }; 69 70 extern struct dio_bus dio_bus; /* Single DIO bus */ 71 extern struct bus_type dio_bus_type; 72 73 /* 74 * DIO device IDs 75 */ 76 77 struct dio_device_id { 78 dio_id id; /* Device ID or DIO_WILDCARD */ 79 unsigned long driver_data; /* Data private to the driver */ 80 }; 81 82 /* 83 * DIO device drivers 84 */ 85 86 struct dio_driver { 87 struct list_head node; 88 char *name; 89 const struct dio_device_id *id_table; /* NULL if wants all devices */ 90 int (*probe)(struct dio_dev *z, const struct dio_device_id *id); 91 /* New device inserted */ 92 void (*remove)(struct dio_dev *z); /* Device removed (NULL if not a hot-plug capable driver) */ 93 struct device_driver driver; 94 }; 95 96 #define to_dio_driver(drv) container_of(drv, struct dio_driver, driver) 97 98 /* DIO/DIO-II boards all have the following 8bit registers. 99 * These are offsets from the base of the device. 100 */ 101 #define DIO_IDOFF 0x01 /* primary device ID */ 102 #define DIO_IPLOFF 0x03 /* interrupt priority level */ 103 #define DIO_SECIDOFF 0x15 /* secondary device ID */ 104 #define DIOII_SIZEOFF 0x101 /* device size, DIO-II only */ 105 #define DIO_VIRADDRBASE 0xf0000000UL /* vir addr where IOspace is mapped */ 106 107 #define DIO_BASE 0x600000 /* start of DIO space */ 108 #define DIO_END 0x1000000 /* end of DIO space */ 109 #define DIO_DEVSIZE 0x10000 /* size of a DIO device */ 110 111 #define DIOII_BASE 0x01000000 /* start of DIO-II space */ 112 #define DIOII_END 0x20000000 /* end of DIO-II space */ 113 #define DIOII_DEVSIZE 0x00400000 /* size of a DIO-II device */ 114 115 /* Highest valid select code. If we add DIO-II support this should become 116 * 256 for everything except HP320, which only has DIO. 117 */ 118 #define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256) 119 #define DIOII_SCBASE 132 /* lowest DIO-II select code */ 120 #define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE)) 121 #define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256) 122 123 /* macros to read device IDs, given base address */ 124 #define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF) 125 #define DIO_SECID(baseaddr) in_8((baseaddr) + DIO_SECIDOFF) 126 127 /* extract the interrupt level */ 128 #define DIO_IPL(baseaddr) (((in_8((baseaddr) + DIO_IPLOFF) >> 4) & 0x03) + 3) 129 130 /* find the size of a DIO-II board's address space. 131 * DIO boards are all fixed length. 132 */ 133 #define DIOII_SIZE(baseaddr) ((in_8((baseaddr) + DIOII_SIZEOFF) + 1) * 0x100000) 134 135 /* general purpose macro for both DIO and DIO-II */ 136 #define DIO_SIZE(scode, base) (DIO_ISDIOII((scode)) ? DIOII_SIZE((base)) : DIO_DEVSIZE) 137 138 /* The hardware has primary and secondary IDs; we encode these in a single 139 * int as PRIMARY ID & (SECONDARY ID << 8). 140 * In practice this is only important for framebuffers, 141 * and everybody else just sets ID fields equal to the DIO_ID_FOO value. 142 */ 143 #define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) | ((int)pr & 0xff)) 144 /* macro to determine whether a given primary ID requires a secondary ID byte */ 145 #define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER) 146 #define DIO_WILDCARD 0xff 147 148 /* Now a whole slew of macros giving device IDs and descriptive strings: */ 149 #define DIO_ID_DCA0 0x02 /* 98644A serial */ 150 #define DIO_DESC_DCA0 "98644A DCA0 serial" 151 #define DIO_ID_DCA0REM 0x82 /* 98644A serial */ 152 #define DIO_DESC_DCA0REM "98644A DCA0REM serial" 153 #define DIO_ID_DCA1 0x42 /* 98644A serial */ 154 #define DIO_DESC_DCA1 "98644A DCA1 serial" 155 #define DIO_ID_DCA1REM 0xc2 /* 98644A serial */ 156 #define DIO_DESC_DCA1REM "98644A DCA1REM serial" 157 #define DIO_ID_DCM 0x05 /* 98642A serial MUX */ 158 #define DIO_DESC_DCM "98642A DCM serial MUX" 159 #define DIO_ID_DCMREM 0x85 /* 98642A serial MUX */ 160 #define DIO_DESC_DCMREM "98642A DCMREM serial MUX" 161 #define DIO_ID_LAN 0x15 /* 98643A LAN */ 162 #define DIO_DESC_LAN "98643A LANCE ethernet" 163 #define DIO_ID_FHPIB 0x08 /* 98625A/98625B fast HP-IB */ 164 #define DIO_DESC_FHPIB "98625A/98625B fast HPIB" 165 #define DIO_ID_NHPIB 0x01 /* 98624A HP-IB (normal ie slow) */ 166 #define DIO_DESC_NHPIB "98624A HPIB" 167 #define DIO_ID_SCSI0 0x07 /* 98265A SCSI */ 168 #define DIO_DESC_SCSI0 "98265A SCSI0" 169 #define DIO_ID_SCSI1 0x27 /* ditto */ 170 #define DIO_DESC_SCSI1 "98265A SCSI1" 171 #define DIO_ID_SCSI2 0x47 /* ditto */ 172 #define DIO_DESC_SCSI2 "98265A SCSI2" 173 #define DIO_ID_SCSI3 0x67 /* ditto */ 174 #define DIO_DESC_SCSI3 "98265A SCSI3" 175 #define DIO_ID_FBUFFER 0x39 /* framebuffer: flavour is distinguished by secondary ID */ 176 #define DIO_DESC_FBUFFER "bitmapped display" 177 /* the NetBSD kernel source is a bit unsure as to what these next IDs actually do :-> */ 178 #define DIO_ID_MISC0 0x03 /* 98622A */ 179 #define DIO_DESC_MISC0 "98622A" 180 #define DIO_ID_MISC1 0x04 /* 98623A */ 181 #define DIO_DESC_MISC1 "98623A" 182 #define DIO_ID_PARALLEL 0x06 /* internal parallel */ 183 #define DIO_DESC_PARALLEL "internal parallel" 184 #define DIO_ID_MISC2 0x09 /* 98287A keyboard */ 185 #define DIO_DESC_MISC2 "98287A keyboard" 186 #define DIO_ID_MISC3 0x0a /* HP98635A FP accelerator */ 187 #define DIO_DESC_MISC3 "HP98635A FP accelerator" 188 #define DIO_ID_MISC4 0x0b /* timer */ 189 #define DIO_DESC_MISC4 "timer" 190 #define DIO_ID_MISC5 0x12 /* 98640A */ 191 #define DIO_DESC_MISC5 "98640A" 192 #define DIO_ID_MISC6 0x16 /* 98659A */ 193 #define DIO_DESC_MISC6 "98659A" 194 #define DIO_ID_MISC7 0x19 /* 237 display */ 195 #define DIO_DESC_MISC7 "237 display" 196 #define DIO_ID_MISC8 0x1a /* quad-wide card */ 197 #define DIO_DESC_MISC8 "quad-wide card" 198 #define DIO_ID_MISC9 0x1b /* 98253A */ 199 #define DIO_DESC_MISC9 "98253A" 200 #define DIO_ID_MISC10 0x1c /* 98627A */ 201 #define DIO_DESC_MISC10 "98253A" 202 #define DIO_ID_MISC11 0x1d /* 98633A */ 203 #define DIO_DESC_MISC11 "98633A" 204 #define DIO_ID_MISC12 0x1e /* 98259A */ 205 #define DIO_DESC_MISC12 "98259A" 206 #define DIO_ID_MISC13 0x1f /* 8741 */ 207 #define DIO_DESC_MISC13 "8741" 208 #define DIO_ID_VME 0x31 /* 98577A VME adapter */ 209 #define DIO_DESC_VME "98577A VME adapter" 210 #define DIO_ID_DCL 0x34 /* 98628A serial */ 211 #define DIO_DESC_DCL "98628A DCL serial" 212 #define DIO_ID_DCLREM 0xb4 /* 98628A serial */ 213 #define DIO_DESC_DCLREM "98628A DCLREM serial" 214 /* These are the secondary IDs for the framebuffers */ 215 #define DIO_ID2_GATORBOX 0x01 /* 98700/98710 "gatorbox" */ 216 #define DIO_DESC2_GATORBOX "98700/98710 \"gatorbox\" display" 217 #define DIO_ID2_TOPCAT 0x02 /* 98544/98545/98547 "topcat" */ 218 #define DIO_DESC2_TOPCAT "98544/98545/98547 \"topcat\" display" 219 #define DIO_ID2_RENAISSANCE 0x04 /* 98720/98721 "renaissance" */ 220 #define DIO_DESC2_RENAISSANCE "98720/98721 \"renaissance\" display" 221 #define DIO_ID2_LRCATSEYE 0x05 /* lowres "catseye" */ 222 #define DIO_DESC2_LRCATSEYE "low-res catseye display" 223 #define DIO_ID2_HRCCATSEYE 0x06 /* highres colour "catseye" */ 224 #define DIO_DESC2_HRCCATSEYE "high-res color catseye display" 225 #define DIO_ID2_HRMCATSEYE 0x07 /* highres mono "catseye" */ 226 #define DIO_DESC2_HRMCATSEYE "high-res mono catseye display" 227 #define DIO_ID2_DAVINCI 0x08 /* 98730/98731 "davinci" */ 228 #define DIO_DESC2_DAVINCI "98730/98731 \"davinci\" display" 229 #define DIO_ID2_XXXCATSEYE 0x09 /* "catseye" */ 230 #define DIO_DESC2_XXXCATSEYE "catseye display" 231 #define DIO_ID2_HYPERION 0x0e /* A1096A "hyperion" */ 232 #define DIO_DESC2_HYPERION "A1096A \"hyperion\" display" 233 #define DIO_ID2_XGENESIS 0x0b /* "x-genesis"; no NetBSD support */ 234 #define DIO_DESC2_XGENESIS "\"x-genesis\" display" 235 #define DIO_ID2_TIGER 0x0c /* "tiger"; no NetBSD support */ 236 #define DIO_DESC2_TIGER "\"tiger\" display" 237 #define DIO_ID2_YGENESIS 0x0d /* "y-genesis"; no NetBSD support */ 238 #define DIO_DESC2_YGENESIS "\"y-genesis\" display" 239 /* if you add new IDs then you should tell dio.c about them so it can 240 * identify them... 241 */ 242 243 extern int dio_find(int deviceid); 244 extern unsigned long dio_scodetophysaddr(int scode); 245 extern int dio_create_sysfs_dev_files(struct dio_dev *); 246 247 /* New-style probing */ 248 extern int dio_register_driver(struct dio_driver *); 249 extern void dio_unregister_driver(struct dio_driver *); 250 extern const struct dio_device_id *dio_match_device(const struct dio_device_id *ids, const struct dio_dev *z); 251 static inline struct dio_driver *dio_dev_driver(const struct dio_dev *d) 252 { 253 return d->driver; 254 } 255 256 #define dio_resource_start(d) ((d)->resource.start) 257 #define dio_resource_end(d) ((d)->resource.end) 258 #define dio_resource_len(d) (resource_size(&(d)->resource)) 259 #define dio_resource_flags(d) ((d)->resource.flags) 260 261 #define dio_request_device(d, name) \ 262 request_mem_region(dio_resource_start(d), dio_resource_len(d), name) 263 #define dio_release_device(d) \ 264 release_mem_region(dio_resource_start(d), dio_resource_len(d)) 265 266 /* Similar to the helpers above, these manipulate per-dio_dev 267 * driver-specific data. They are really just a wrapper around 268 * the generic device structure functions of these calls. 269 */ 270 static inline void *dio_get_drvdata (struct dio_dev *d) 271 { 272 return dev_get_drvdata(&d->dev); 273 } 274 275 static inline void dio_set_drvdata (struct dio_dev *d, void *data) 276 { 277 dev_set_drvdata(&d->dev, data); 278 } 279 280 #endif /* __KERNEL__ */ 281 #endif /* ndef _LINUX_DIO_H */ 282