1 /* 2 * Copyright © 2006 Keith Packard 3 * Copyright © 2007-2008 Dave Airlie 4 * Copyright © 2007-2008 Intel Corporation 5 * Jesse Barnes <jesse.barnes@intel.com> 6 * Copyright © 2014 Intel Corporation 7 * Daniel Vetter <daniel.vetter@ffwll.ch> 8 * 9 * Permission is hereby granted, free of charge, to any person obtaining a 10 * copy of this software and associated documentation files (the "Software"), 11 * to deal in the Software without restriction, including without limitation 12 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 13 * and/or sell copies of the Software, and to permit persons to whom the 14 * Software is furnished to do so, subject to the following conditions: 15 * 16 * The above copyright notice and this permission notice shall be included in 17 * all copies or substantial portions of the Software. 18 * 19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 22 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR 23 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 24 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 25 * OTHER DEALINGS IN THE SOFTWARE. 26 */ 27 #ifndef __DRM_MODES_H__ 28 #define __DRM_MODES_H__ 29 30 #include <linux/hdmi.h> 31 32 #include <drm/drm_mode_object.h> 33 #include <drm/drm_connector.h> 34 35 struct videomode; 36 37 /* 38 * Note on terminology: here, for brevity and convenience, we refer to connector 39 * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS, 40 * DVI, etc. And 'screen' refers to the whole of the visible display, which 41 * may span multiple monitors (and therefore multiple CRTC and connector 42 * structures). 43 */ 44 45 /** 46 * enum drm_mode_status - hardware support status of a mode 47 * @MODE_OK: Mode OK 48 * @MODE_HSYNC: hsync out of range 49 * @MODE_VSYNC: vsync out of range 50 * @MODE_H_ILLEGAL: mode has illegal horizontal timings 51 * @MODE_V_ILLEGAL: mode has illegal horizontal timings 52 * @MODE_BAD_WIDTH: requires an unsupported linepitch 53 * @MODE_NOMODE: no mode with a matching name 54 * @MODE_NO_INTERLACE: interlaced mode not supported 55 * @MODE_NO_DBLESCAN: doublescan mode not supported 56 * @MODE_NO_VSCAN: multiscan mode not supported 57 * @MODE_MEM: insufficient video memory 58 * @MODE_VIRTUAL_X: mode width too large for specified virtual size 59 * @MODE_VIRTUAL_Y: mode height too large for specified virtual size 60 * @MODE_MEM_VIRT: insufficient video memory given virtual size 61 * @MODE_NOCLOCK: no fixed clock available 62 * @MODE_CLOCK_HIGH: clock required is too high 63 * @MODE_CLOCK_LOW: clock required is too low 64 * @MODE_CLOCK_RANGE: clock/mode isn't in a ClockRange 65 * @MODE_BAD_HVALUE: horizontal timing was out of range 66 * @MODE_BAD_VVALUE: vertical timing was out of range 67 * @MODE_BAD_VSCAN: VScan value out of range 68 * @MODE_HSYNC_NARROW: horizontal sync too narrow 69 * @MODE_HSYNC_WIDE: horizontal sync too wide 70 * @MODE_HBLANK_NARROW: horizontal blanking too narrow 71 * @MODE_HBLANK_WIDE: horizontal blanking too wide 72 * @MODE_VSYNC_NARROW: vertical sync too narrow 73 * @MODE_VSYNC_WIDE: vertical sync too wide 74 * @MODE_VBLANK_NARROW: vertical blanking too narrow 75 * @MODE_VBLANK_WIDE: vertical blanking too wide 76 * @MODE_PANEL: exceeds panel dimensions 77 * @MODE_INTERLACE_WIDTH: width too large for interlaced mode 78 * @MODE_ONE_WIDTH: only one width is supported 79 * @MODE_ONE_HEIGHT: only one height is supported 80 * @MODE_ONE_SIZE: only one resolution is supported 81 * @MODE_NO_REDUCED: monitor doesn't accept reduced blanking 82 * @MODE_NO_STEREO: stereo modes not supported 83 * @MODE_STALE: mode has become stale 84 * @MODE_BAD: unspecified reason 85 * @MODE_ERROR: error condition 86 * 87 * This enum is used to filter out modes not supported by the driver/hardware 88 * combination. 89 */ 90 enum drm_mode_status { 91 MODE_OK = 0, 92 MODE_HSYNC, 93 MODE_VSYNC, 94 MODE_H_ILLEGAL, 95 MODE_V_ILLEGAL, 96 MODE_BAD_WIDTH, 97 MODE_NOMODE, 98 MODE_NO_INTERLACE, 99 MODE_NO_DBLESCAN, 100 MODE_NO_VSCAN, 101 MODE_MEM, 102 MODE_VIRTUAL_X, 103 MODE_VIRTUAL_Y, 104 MODE_MEM_VIRT, 105 MODE_NOCLOCK, 106 MODE_CLOCK_HIGH, 107 MODE_CLOCK_LOW, 108 MODE_CLOCK_RANGE, 109 MODE_BAD_HVALUE, 110 MODE_BAD_VVALUE, 111 MODE_BAD_VSCAN, 112 MODE_HSYNC_NARROW, 113 MODE_HSYNC_WIDE, 114 MODE_HBLANK_NARROW, 115 MODE_HBLANK_WIDE, 116 MODE_VSYNC_NARROW, 117 MODE_VSYNC_WIDE, 118 MODE_VBLANK_NARROW, 119 MODE_VBLANK_WIDE, 120 MODE_PANEL, 121 MODE_INTERLACE_WIDTH, 122 MODE_ONE_WIDTH, 123 MODE_ONE_HEIGHT, 124 MODE_ONE_SIZE, 125 MODE_NO_REDUCED, 126 MODE_NO_STEREO, 127 MODE_STALE = -3, 128 MODE_BAD = -2, 129 MODE_ERROR = -1 130 }; 131 132 #define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \ 133 DRM_MODE_TYPE_CRTC_C) 134 135 #define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \ 136 .name = nm, .status = 0, .type = (t), .clock = (c), \ 137 .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \ 138 .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \ 139 .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \ 140 .vscan = (vs), .flags = (f), \ 141 .base.type = DRM_MODE_OBJECT_MODE 142 143 #define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */ 144 #define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */ 145 #define CRTC_NO_DBLSCAN (1 << 2) /* don't adjust doublescan */ 146 #define CRTC_NO_VSCAN (1 << 3) /* don't adjust doublescan */ 147 #define CRTC_STEREO_DOUBLE_ONLY (CRTC_STEREO_DOUBLE | CRTC_NO_DBLSCAN | CRTC_NO_VSCAN) 148 149 #define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF 150 151 /** 152 * struct drm_display_mode - DRM kernel-internal display mode structure 153 * @hdisplay: horizontal display size 154 * @hsync_start: horizontal sync start 155 * @hsync_end: horizontal sync end 156 * @htotal: horizontal total size 157 * @hskew: horizontal skew?! 158 * @vdisplay: vertical display size 159 * @vsync_start: vertical sync start 160 * @vsync_end: vertical sync end 161 * @vtotal: vertical total size 162 * @vscan: vertical scan?! 163 * @crtc_hdisplay: hardware mode horizontal display size 164 * @crtc_hblank_start: hardware mode horizontal blank start 165 * @crtc_hblank_end: hardware mode horizontal blank end 166 * @crtc_hsync_start: hardware mode horizontal sync start 167 * @crtc_hsync_end: hardware mode horizontal sync end 168 * @crtc_htotal: hardware mode horizontal total size 169 * @crtc_hskew: hardware mode horizontal skew?! 170 * @crtc_vdisplay: hardware mode vertical display size 171 * @crtc_vblank_start: hardware mode vertical blank start 172 * @crtc_vblank_end: hardware mode vertical blank end 173 * @crtc_vsync_start: hardware mode vertical sync start 174 * @crtc_vsync_end: hardware mode vertical sync end 175 * @crtc_vtotal: hardware mode vertical total size 176 * 177 * The horizontal and vertical timings are defined per the following diagram. 178 * 179 * :: 180 * 181 * 182 * Active Front Sync Back 183 * Region Porch Porch 184 * <-----------------------><----------------><-------------><--------------> 185 * //////////////////////| 186 * ////////////////////// | 187 * ////////////////////// |.................. ................ 188 * _______________ 189 * <----- [hv]display -----> 190 * <------------- [hv]sync_start ------------> 191 * <--------------------- [hv]sync_end ---------------------> 192 * <-------------------------------- [hv]total ----------------------------->* 193 * 194 * This structure contains two copies of timings. First are the plain timings, 195 * which specify the logical mode, as it would be for a progressive 1:1 scanout 196 * at the refresh rate userspace can observe through vblank timestamps. Then 197 * there's the hardware timings, which are corrected for interlacing, 198 * double-clocking and similar things. They are provided as a convenience, and 199 * can be appropriately computed using drm_mode_set_crtcinfo(). 200 */ 201 struct drm_display_mode { 202 /** 203 * @head: 204 * 205 * struct list_head for mode lists. 206 */ 207 struct list_head head; 208 209 /** 210 * @base: 211 * 212 * A display mode is a normal modeset object, possibly including public 213 * userspace id. 214 * 215 * FIXME: 216 * 217 * This can probably be removed since the entire concept of userspace 218 * managing modes explicitly has never landed in upstream kernel mode 219 * setting support. 220 */ 221 struct drm_mode_object base; 222 223 /** 224 * @name: 225 * 226 * Human-readable name of the mode, filled out with drm_mode_set_name(). 227 */ 228 char name[DRM_DISPLAY_MODE_LEN]; 229 230 /** 231 * @status: 232 * 233 * Status of the mode, used to filter out modes not supported by the 234 * hardware. See enum &drm_mode_status. 235 */ 236 enum drm_mode_status status; 237 238 /** 239 * @type: 240 * 241 * A bitmask of flags, mostly about the source of a mode. Possible flags 242 * are: 243 * 244 * - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, effectively 245 * unused. 246 * - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native 247 * resolution of an LCD panel. There should only be one preferred 248 * mode per connector at any given time. 249 * - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of 250 * them really. Drivers must set this bit for all modes they create 251 * and expose to userspace. 252 * 253 * Plus a big list of flags which shouldn't be used at all, but are 254 * still around since these flags are also used in the userspace ABI: 255 * 256 * - DRM_MODE_TYPE_DEFAULT: Again a leftover, use 257 * DRM_MODE_TYPE_PREFERRED instead. 258 * - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers 259 * which are stuck around for hysterical raisins only. No one has an 260 * idea what they were meant for. Don't use. 261 * - DRM_MODE_TYPE_USERDEF: Mode defined by userspace, again a vestige 262 * from older kms designs where userspace had to first add a custom 263 * mode to the kernel's mode list before it could use it. Don't use. 264 */ 265 unsigned int type; 266 267 /** 268 * @clock: 269 * 270 * Pixel clock in kHz. 271 */ 272 int clock; /* in kHz */ 273 int hdisplay; 274 int hsync_start; 275 int hsync_end; 276 int htotal; 277 int hskew; 278 int vdisplay; 279 int vsync_start; 280 int vsync_end; 281 int vtotal; 282 int vscan; 283 /** 284 * @flags: 285 * 286 * Sync and timing flags: 287 * 288 * - DRM_MODE_FLAG_PHSYNC: horizontal sync is active high. 289 * - DRM_MODE_FLAG_NHSYNC: horizontal sync is active low. 290 * - DRM_MODE_FLAG_PVSYNC: vertical sync is active high. 291 * - DRM_MODE_FLAG_NVSYNC: vertical sync is active low. 292 * - DRM_MODE_FLAG_INTERLACE: mode is interlaced. 293 * - DRM_MODE_FLAG_DBLSCAN: mode uses doublescan. 294 * - DRM_MODE_FLAG_CSYNC: mode uses composite sync. 295 * - DRM_MODE_FLAG_PCSYNC: composite sync is active high. 296 * - DRM_MODE_FLAG_NCSYNC: composite sync is active low. 297 * - DRM_MODE_FLAG_HSKEW: hskew provided (not used?). 298 * - DRM_MODE_FLAG_BCAST: not used? 299 * - DRM_MODE_FLAG_PIXMUX: not used? 300 * - DRM_MODE_FLAG_DBLCLK: double-clocked mode. 301 * - DRM_MODE_FLAG_CLKDIV2: half-clocked mode. 302 * 303 * Additionally there's flags to specify how 3D modes are packed: 304 * 305 * - DRM_MODE_FLAG_3D_NONE: normal, non-3D mode. 306 * - DRM_MODE_FLAG_3D_FRAME_PACKING: 2 full frames for left and right. 307 * - DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: interleaved like fields. 308 * - DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: interleaved lines. 309 * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: side-by-side full frames. 310 * - DRM_MODE_FLAG_3D_L_DEPTH: ? 311 * - DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ? 312 * - DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: frame split into top and bottom 313 * parts. 314 * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and 315 * right parts. 316 */ 317 unsigned int flags; 318 319 /** 320 * @width_mm: 321 * 322 * Addressable size of the output in mm, projectors should set this to 323 * 0. 324 */ 325 int width_mm; 326 327 /** 328 * @height_mm: 329 * 330 * Addressable size of the output in mm, projectors should set this to 331 * 0. 332 */ 333 int height_mm; 334 335 /** 336 * @crtc_clock: 337 * 338 * Actual pixel or dot clock in the hardware. This differs from the 339 * logical @clock when e.g. using interlacing, double-clocking, stereo 340 * modes or other fancy stuff that changes the timings and signals 341 * actually sent over the wire. 342 * 343 * This is again in kHz. 344 * 345 * Note that with digital outputs like HDMI or DP there's usually a 346 * massive confusion between the dot clock and the signal clock at the 347 * bit encoding level. Especially when a 8b/10b encoding is used and the 348 * difference is exactly a factor of 10. 349 */ 350 int crtc_clock; 351 int crtc_hdisplay; 352 int crtc_hblank_start; 353 int crtc_hblank_end; 354 int crtc_hsync_start; 355 int crtc_hsync_end; 356 int crtc_htotal; 357 int crtc_hskew; 358 int crtc_vdisplay; 359 int crtc_vblank_start; 360 int crtc_vblank_end; 361 int crtc_vsync_start; 362 int crtc_vsync_end; 363 int crtc_vtotal; 364 365 /** 366 * @private: 367 * 368 * Pointer for driver private data. This can only be used for mode 369 * objects passed to drivers in modeset operations. It shouldn't be used 370 * by atomic drivers since they can store any additional data by 371 * subclassing state structures. 372 */ 373 int *private; 374 375 /** 376 * @private_flags: 377 * 378 * Similar to @private, but just an integer. 379 */ 380 int private_flags; 381 382 /** 383 * @vrefresh: 384 * 385 * Vertical refresh rate, for debug output in human readable form. Not 386 * used in a functional way. 387 * 388 * This value is in Hz. 389 */ 390 int vrefresh; 391 392 /** 393 * @hsync: 394 * 395 * Horizontal refresh rate, for debug output in human readable form. Not 396 * used in a functional way. 397 * 398 * This value is in kHz. 399 */ 400 int hsync; 401 402 /** 403 * @picture_aspect_ratio: 404 * 405 * Field for setting the HDMI picture aspect ratio of a mode. 406 */ 407 enum hdmi_picture_aspect picture_aspect_ratio; 408 }; 409 410 #define obj_to_mode(x) container_of(x, struct drm_display_mode, base) 411 412 /** 413 * drm_mode_is_stereo - check for stereo mode flags 414 * @mode: drm_display_mode to check 415 * 416 * Returns: 417 * True if the mode is one of the stereo modes (like side-by-side), false if 418 * not. 419 */ 420 static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode) 421 { 422 return mode->flags & DRM_MODE_FLAG_3D_MASK; 423 } 424 425 struct drm_connector; 426 struct drm_cmdline_mode; 427 428 struct drm_display_mode *drm_mode_create(struct drm_device *dev); 429 void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode); 430 void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, 431 const struct drm_display_mode *in); 432 int drm_mode_convert_umode(struct drm_display_mode *out, 433 const struct drm_mode_modeinfo *in); 434 void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode); 435 void drm_mode_debug_printmodeline(const struct drm_display_mode *mode); 436 437 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, 438 int hdisplay, int vdisplay, int vrefresh, 439 bool reduced, bool interlaced, 440 bool margins); 441 struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, 442 int hdisplay, int vdisplay, int vrefresh, 443 bool interlaced, int margins); 444 struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev, 445 int hdisplay, int vdisplay, 446 int vrefresh, bool interlaced, 447 int margins, 448 int GTF_M, int GTF_2C, 449 int GTF_K, int GTF_2J); 450 void drm_display_mode_from_videomode(const struct videomode *vm, 451 struct drm_display_mode *dmode); 452 void drm_display_mode_to_videomode(const struct drm_display_mode *dmode, 453 struct videomode *vm); 454 void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags); 455 int of_get_drm_display_mode(struct device_node *np, 456 struct drm_display_mode *dmode, u32 *bus_flags, 457 int index); 458 459 void drm_mode_set_name(struct drm_display_mode *mode); 460 int drm_mode_hsync(const struct drm_display_mode *mode); 461 int drm_mode_vrefresh(const struct drm_display_mode *mode); 462 void drm_mode_get_hv_timing(const struct drm_display_mode *mode, 463 int *hdisplay, int *vdisplay); 464 465 void drm_mode_set_crtcinfo(struct drm_display_mode *p, 466 int adjust_flags); 467 void drm_mode_copy(struct drm_display_mode *dst, 468 const struct drm_display_mode *src); 469 struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, 470 const struct drm_display_mode *mode); 471 bool drm_mode_equal(const struct drm_display_mode *mode1, 472 const struct drm_display_mode *mode2); 473 bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1, 474 const struct drm_display_mode *mode2); 475 bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, 476 const struct drm_display_mode *mode2); 477 478 /* for use by the crtc helper probe functions */ 479 enum drm_mode_status drm_mode_validate_basic(const struct drm_display_mode *mode); 480 enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode, 481 int maxX, int maxY); 482 void drm_mode_prune_invalid(struct drm_device *dev, 483 struct list_head *mode_list, bool verbose); 484 void drm_mode_sort(struct list_head *mode_list); 485 void drm_mode_connector_list_update(struct drm_connector *connector); 486 487 /* parsing cmdline modes */ 488 bool 489 drm_mode_parse_command_line_for_connector(const char *mode_option, 490 struct drm_connector *connector, 491 struct drm_cmdline_mode *mode); 492 struct drm_display_mode * 493 drm_mode_create_from_cmdline_mode(struct drm_device *dev, 494 struct drm_cmdline_mode *cmd); 495 496 #endif /* __DRM_MODES_H__ */ 497