xref: /openbmc/linux/include/drm/drm_mipi_dsi.h (revision c4a11bf4)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * MIPI DSI Bus
4  *
5  * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
6  * Andrzej Hajda <a.hajda@samsung.com>
7  */
8 
9 #ifndef __DRM_MIPI_DSI_H__
10 #define __DRM_MIPI_DSI_H__
11 
12 #include <linux/device.h>
13 
14 struct mipi_dsi_host;
15 struct mipi_dsi_device;
16 struct drm_dsc_picture_parameter_set;
17 
18 /* request ACK from peripheral */
19 #define MIPI_DSI_MSG_REQ_ACK	BIT(0)
20 /* use Low Power Mode to transmit message */
21 #define MIPI_DSI_MSG_USE_LPM	BIT(1)
22 
23 /**
24  * struct mipi_dsi_msg - read/write DSI buffer
25  * @channel: virtual channel id
26  * @type: payload data type
27  * @flags: flags controlling this message transmission
28  * @tx_len: length of @tx_buf
29  * @tx_buf: data to be written
30  * @rx_len: length of @rx_buf
31  * @rx_buf: data to be read, or NULL
32  */
33 struct mipi_dsi_msg {
34 	u8 channel;
35 	u8 type;
36 	u16 flags;
37 
38 	size_t tx_len;
39 	const void *tx_buf;
40 
41 	size_t rx_len;
42 	void *rx_buf;
43 };
44 
45 bool mipi_dsi_packet_format_is_short(u8 type);
46 bool mipi_dsi_packet_format_is_long(u8 type);
47 
48 /**
49  * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
50  * @size: size (in bytes) of the packet
51  * @header: the four bytes that make up the header (Data ID, Word Count or
52  *     Packet Data, and ECC)
53  * @payload_length: number of bytes in the payload
54  * @payload: a pointer to a buffer containing the payload, if any
55  */
56 struct mipi_dsi_packet {
57 	size_t size;
58 	u8 header[4];
59 	size_t payload_length;
60 	const u8 *payload;
61 };
62 
63 int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
64 			   const struct mipi_dsi_msg *msg);
65 
66 /**
67  * struct mipi_dsi_host_ops - DSI bus operations
68  * @attach: attach DSI device to DSI host
69  * @detach: detach DSI device from DSI host
70  * @transfer: transmit a DSI packet
71  *
72  * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
73  * structures. This structure contains information about the type of packet
74  * being transmitted as well as the transmit and receive buffers. When an
75  * error is encountered during transmission, this function will return a
76  * negative error code. On success it shall return the number of bytes
77  * transmitted for write packets or the number of bytes received for read
78  * packets.
79  *
80  * Note that typically DSI packet transmission is atomic, so the .transfer()
81  * function will seldomly return anything other than the number of bytes
82  * contained in the transmit buffer on success.
83  *
84  * Also note that those callbacks can be called no matter the state the
85  * host is in. Drivers that need the underlying device to be powered to
86  * perform these operations will first need to make sure it's been
87  * properly enabled.
88  */
89 struct mipi_dsi_host_ops {
90 	int (*attach)(struct mipi_dsi_host *host,
91 		      struct mipi_dsi_device *dsi);
92 	int (*detach)(struct mipi_dsi_host *host,
93 		      struct mipi_dsi_device *dsi);
94 	ssize_t (*transfer)(struct mipi_dsi_host *host,
95 			    const struct mipi_dsi_msg *msg);
96 };
97 
98 /**
99  * struct mipi_dsi_host - DSI host device
100  * @dev: driver model device node for this DSI host
101  * @ops: DSI host operations
102  * @list: list management
103  */
104 struct mipi_dsi_host {
105 	struct device *dev;
106 	const struct mipi_dsi_host_ops *ops;
107 	struct list_head list;
108 };
109 
110 int mipi_dsi_host_register(struct mipi_dsi_host *host);
111 void mipi_dsi_host_unregister(struct mipi_dsi_host *host);
112 struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node);
113 
114 /* DSI mode flags */
115 
116 /* video mode */
117 #define MIPI_DSI_MODE_VIDEO		BIT(0)
118 /* video burst mode */
119 #define MIPI_DSI_MODE_VIDEO_BURST	BIT(1)
120 /* video pulse mode */
121 #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE	BIT(2)
122 /* enable auto vertical count mode */
123 #define MIPI_DSI_MODE_VIDEO_AUTO_VERT	BIT(3)
124 /* enable hsync-end packets in vsync-pulse and v-porch area */
125 #define MIPI_DSI_MODE_VIDEO_HSE		BIT(4)
126 /* disable hfront-porch area */
127 #define MIPI_DSI_MODE_VIDEO_NO_HFP	BIT(5)
128 /* disable hback-porch area */
129 #define MIPI_DSI_MODE_VIDEO_NO_HBP	BIT(6)
130 /* disable hsync-active area */
131 #define MIPI_DSI_MODE_VIDEO_NO_HSA	BIT(7)
132 /* flush display FIFO on vsync pulse */
133 #define MIPI_DSI_MODE_VSYNC_FLUSH	BIT(8)
134 /* disable EoT packets in HS mode */
135 #define MIPI_DSI_MODE_NO_EOT_PACKET	BIT(9)
136 /* device supports non-continuous clock behavior (DSI spec 5.6.1) */
137 #define MIPI_DSI_CLOCK_NON_CONTINUOUS	BIT(10)
138 /* transmit data in low power */
139 #define MIPI_DSI_MODE_LPM		BIT(11)
140 
141 enum mipi_dsi_pixel_format {
142 	MIPI_DSI_FMT_RGB888,
143 	MIPI_DSI_FMT_RGB666,
144 	MIPI_DSI_FMT_RGB666_PACKED,
145 	MIPI_DSI_FMT_RGB565,
146 };
147 
148 #define DSI_DEV_NAME_SIZE		20
149 
150 /**
151  * struct mipi_dsi_device_info - template for creating a mipi_dsi_device
152  * @type: DSI peripheral chip type
153  * @channel: DSI virtual channel assigned to peripheral
154  * @node: pointer to OF device node or NULL
155  *
156  * This is populated and passed to mipi_dsi_device_new to create a new
157  * DSI device
158  */
159 struct mipi_dsi_device_info {
160 	char type[DSI_DEV_NAME_SIZE];
161 	u32 channel;
162 	struct device_node *node;
163 };
164 
165 /**
166  * struct mipi_dsi_device - DSI peripheral device
167  * @host: DSI host for this peripheral
168  * @dev: driver model device node for this peripheral
169  * @name: DSI peripheral chip type
170  * @channel: virtual channel assigned to the peripheral
171  * @format: pixel format for video mode
172  * @lanes: number of active data lanes
173  * @mode_flags: DSI operation mode related flags
174  * @hs_rate: maximum lane frequency for high speed mode in hertz, this should
175  * be set to the real limits of the hardware, zero is only accepted for
176  * legacy drivers
177  * @lp_rate: maximum lane frequency for low power mode in hertz, this should
178  * be set to the real limits of the hardware, zero is only accepted for
179  * legacy drivers
180  */
181 struct mipi_dsi_device {
182 	struct mipi_dsi_host *host;
183 	struct device dev;
184 
185 	char name[DSI_DEV_NAME_SIZE];
186 	unsigned int channel;
187 	unsigned int lanes;
188 	enum mipi_dsi_pixel_format format;
189 	unsigned long mode_flags;
190 	unsigned long hs_rate;
191 	unsigned long lp_rate;
192 };
193 
194 #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"
195 
196 static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
197 {
198 	return container_of(dev, struct mipi_dsi_device, dev);
199 }
200 
201 /**
202  * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
203  *                                given pixel format defined by the MIPI DSI
204  *                                specification
205  * @fmt: MIPI DSI pixel format
206  *
207  * Returns: The number of bits per pixel of the given pixel format.
208  */
209 static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
210 {
211 	switch (fmt) {
212 	case MIPI_DSI_FMT_RGB888:
213 	case MIPI_DSI_FMT_RGB666:
214 		return 24;
215 
216 	case MIPI_DSI_FMT_RGB666_PACKED:
217 		return 18;
218 
219 	case MIPI_DSI_FMT_RGB565:
220 		return 16;
221 	}
222 
223 	return -EINVAL;
224 }
225 
226 struct mipi_dsi_device *
227 mipi_dsi_device_register_full(struct mipi_dsi_host *host,
228 			      const struct mipi_dsi_device_info *info);
229 void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi);
230 struct mipi_dsi_device *
231 devm_mipi_dsi_device_register_full(struct device *dev, struct mipi_dsi_host *host,
232 				   const struct mipi_dsi_device_info *info);
233 struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
234 int mipi_dsi_attach(struct mipi_dsi_device *dsi);
235 int mipi_dsi_detach(struct mipi_dsi_device *dsi);
236 int devm_mipi_dsi_attach(struct device *dev, struct mipi_dsi_device *dsi);
237 int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi);
238 int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
239 int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
240 					    u16 value);
241 ssize_t mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable);
242 ssize_t mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi,
243 				       const struct drm_dsc_picture_parameter_set *pps);
244 
245 ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
246 			       size_t size);
247 ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
248 			      size_t num_params, void *data, size_t size);
249 
250 /**
251  * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
252  * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
253  *    information only
254  * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
255  *    V-Blanking and H-Blanking information
256  */
257 enum mipi_dsi_dcs_tear_mode {
258 	MIPI_DSI_DCS_TEAR_MODE_VBLANK,
259 	MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
260 };
261 
262 #define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2)
263 #define MIPI_DSI_DCS_POWER_MODE_NORMAL  (1 << 3)
264 #define MIPI_DSI_DCS_POWER_MODE_SLEEP   (1 << 4)
265 #define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5)
266 #define MIPI_DSI_DCS_POWER_MODE_IDLE    (1 << 6)
267 
268 ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
269 				  const void *data, size_t len);
270 ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
271 			   const void *data, size_t len);
272 ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
273 			  size_t len);
274 int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
275 int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
276 int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
277 int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
278 int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
279 int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
280 int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
281 int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
282 int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
283 				    u16 end);
284 int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
285 				  u16 end);
286 int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
287 int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
288 			     enum mipi_dsi_dcs_tear_mode mode);
289 int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
290 int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
291 int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
292 					u16 brightness);
293 int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
294 					u16 *brightness);
295 
296 /**
297  * struct mipi_dsi_driver - DSI driver
298  * @driver: device driver model driver
299  * @probe: callback for device binding
300  * @remove: callback for device unbinding
301  * @shutdown: called at shutdown time to quiesce the device
302  */
303 struct mipi_dsi_driver {
304 	struct device_driver driver;
305 	int(*probe)(struct mipi_dsi_device *dsi);
306 	int(*remove)(struct mipi_dsi_device *dsi);
307 	void (*shutdown)(struct mipi_dsi_device *dsi);
308 };
309 
310 static inline struct mipi_dsi_driver *
311 to_mipi_dsi_driver(struct device_driver *driver)
312 {
313 	return container_of(driver, struct mipi_dsi_driver, driver);
314 }
315 
316 static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi)
317 {
318 	return dev_get_drvdata(&dsi->dev);
319 }
320 
321 static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data)
322 {
323 	dev_set_drvdata(&dsi->dev, data);
324 }
325 
326 int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver,
327 				  struct module *owner);
328 void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver);
329 
330 #define mipi_dsi_driver_register(driver) \
331 	mipi_dsi_driver_register_full(driver, THIS_MODULE)
332 
333 #define module_mipi_dsi_driver(__mipi_dsi_driver) \
334 	module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \
335 			mipi_dsi_driver_unregister)
336 
337 #endif /* __DRM_MIPI_DSI__ */
338