1 /* 2 * MIPI DSI Bus 3 * 4 * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. 5 * Andrzej Hajda <a.hajda@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 */ 11 12 #ifndef __DRM_MIPI_DSI_H__ 13 #define __DRM_MIPI_DSI_H__ 14 15 #include <linux/device.h> 16 17 struct mipi_dsi_host; 18 struct mipi_dsi_device; 19 20 /* request ACK from peripheral */ 21 #define MIPI_DSI_MSG_REQ_ACK BIT(0) 22 /* use Low Power Mode to transmit message */ 23 #define MIPI_DSI_MSG_USE_LPM BIT(1) 24 25 /** 26 * struct mipi_dsi_msg - read/write DSI buffer 27 * @channel: virtual channel id 28 * @type: payload data type 29 * @flags: flags controlling this message transmission 30 * @tx_len: length of @tx_buf 31 * @tx_buf: data to be written 32 * @rx_len: length of @rx_buf 33 * @rx_buf: data to be read, or NULL 34 */ 35 struct mipi_dsi_msg { 36 u8 channel; 37 u8 type; 38 u16 flags; 39 40 size_t tx_len; 41 const void *tx_buf; 42 43 size_t rx_len; 44 void *rx_buf; 45 }; 46 47 bool mipi_dsi_packet_format_is_short(u8 type); 48 bool mipi_dsi_packet_format_is_long(u8 type); 49 50 /** 51 * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format 52 * @size: size (in bytes) of the packet 53 * @header: the four bytes that make up the header (Data ID, Word Count or 54 * Packet Data, and ECC) 55 * @payload_length: number of bytes in the payload 56 * @payload: a pointer to a buffer containing the payload, if any 57 */ 58 struct mipi_dsi_packet { 59 size_t size; 60 u8 header[4]; 61 size_t payload_length; 62 const u8 *payload; 63 }; 64 65 int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, 66 const struct mipi_dsi_msg *msg); 67 68 /** 69 * struct mipi_dsi_host_ops - DSI bus operations 70 * @attach: attach DSI device to DSI host 71 * @detach: detach DSI device from DSI host 72 * @transfer: transmit a DSI packet 73 * 74 * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg 75 * structures. This structure contains information about the type of packet 76 * being transmitted as well as the transmit and receive buffers. When an 77 * error is encountered during transmission, this function will return a 78 * negative error code. On success it shall return the number of bytes 79 * transmitted for write packets or the number of bytes received for read 80 * packets. 81 * 82 * Note that typically DSI packet transmission is atomic, so the .transfer() 83 * function will seldomly return anything other than the number of bytes 84 * contained in the transmit buffer on success. 85 */ 86 struct mipi_dsi_host_ops { 87 int (*attach)(struct mipi_dsi_host *host, 88 struct mipi_dsi_device *dsi); 89 int (*detach)(struct mipi_dsi_host *host, 90 struct mipi_dsi_device *dsi); 91 ssize_t (*transfer)(struct mipi_dsi_host *host, 92 const struct mipi_dsi_msg *msg); 93 }; 94 95 /** 96 * struct mipi_dsi_host - DSI host device 97 * @dev: driver model device node for this DSI host 98 * @ops: DSI host operations 99 */ 100 struct mipi_dsi_host { 101 struct device *dev; 102 const struct mipi_dsi_host_ops *ops; 103 }; 104 105 int mipi_dsi_host_register(struct mipi_dsi_host *host); 106 void mipi_dsi_host_unregister(struct mipi_dsi_host *host); 107 108 /* DSI mode flags */ 109 110 /* video mode */ 111 #define MIPI_DSI_MODE_VIDEO BIT(0) 112 /* video burst mode */ 113 #define MIPI_DSI_MODE_VIDEO_BURST BIT(1) 114 /* video pulse mode */ 115 #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) 116 /* enable auto vertical count mode */ 117 #define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) 118 /* enable hsync-end packets in vsync-pulse and v-porch area */ 119 #define MIPI_DSI_MODE_VIDEO_HSE BIT(4) 120 /* disable hfront-porch area */ 121 #define MIPI_DSI_MODE_VIDEO_HFP BIT(5) 122 /* disable hback-porch area */ 123 #define MIPI_DSI_MODE_VIDEO_HBP BIT(6) 124 /* disable hsync-active area */ 125 #define MIPI_DSI_MODE_VIDEO_HSA BIT(7) 126 /* flush display FIFO on vsync pulse */ 127 #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) 128 /* disable EoT packets in HS mode */ 129 #define MIPI_DSI_MODE_EOT_PACKET BIT(9) 130 /* device supports non-continuous clock behavior (DSI spec 5.6.1) */ 131 #define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) 132 /* transmit data in low power */ 133 #define MIPI_DSI_MODE_LPM BIT(11) 134 135 enum mipi_dsi_pixel_format { 136 MIPI_DSI_FMT_RGB888, 137 MIPI_DSI_FMT_RGB666, 138 MIPI_DSI_FMT_RGB666_PACKED, 139 MIPI_DSI_FMT_RGB565, 140 }; 141 142 /** 143 * struct mipi_dsi_device - DSI peripheral device 144 * @host: DSI host for this peripheral 145 * @dev: driver model device node for this peripheral 146 * @channel: virtual channel assigned to the peripheral 147 * @format: pixel format for video mode 148 * @lanes: number of active data lanes 149 * @mode_flags: DSI operation mode related flags 150 */ 151 struct mipi_dsi_device { 152 struct mipi_dsi_host *host; 153 struct device dev; 154 155 unsigned int channel; 156 unsigned int lanes; 157 enum mipi_dsi_pixel_format format; 158 unsigned long mode_flags; 159 }; 160 161 static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev) 162 { 163 return container_of(dev, struct mipi_dsi_device, dev); 164 } 165 166 /** 167 * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any 168 * given pixel format defined by the MIPI DSI 169 * specification 170 * @fmt: MIPI DSI pixel format 171 * 172 * Returns: The number of bits per pixel of the given pixel format. 173 */ 174 static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt) 175 { 176 switch (fmt) { 177 case MIPI_DSI_FMT_RGB888: 178 case MIPI_DSI_FMT_RGB666: 179 return 24; 180 181 case MIPI_DSI_FMT_RGB666_PACKED: 182 return 18; 183 184 case MIPI_DSI_FMT_RGB565: 185 return 16; 186 } 187 188 return -EINVAL; 189 } 190 191 struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np); 192 int mipi_dsi_attach(struct mipi_dsi_device *dsi); 193 int mipi_dsi_detach(struct mipi_dsi_device *dsi); 194 int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi); 195 int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi); 196 int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, 197 u16 value); 198 199 ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, 200 size_t size); 201 ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, 202 size_t num_params, void *data, size_t size); 203 204 /** 205 * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode 206 * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking 207 * information only 208 * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both 209 * V-Blanking and H-Blanking information 210 */ 211 enum mipi_dsi_dcs_tear_mode { 212 MIPI_DSI_DCS_TEAR_MODE_VBLANK, 213 MIPI_DSI_DCS_TEAR_MODE_VHBLANK, 214 }; 215 216 #define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2) 217 #define MIPI_DSI_DCS_POWER_MODE_NORMAL (1 << 3) 218 #define MIPI_DSI_DCS_POWER_MODE_SLEEP (1 << 4) 219 #define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5) 220 #define MIPI_DSI_DCS_POWER_MODE_IDLE (1 << 6) 221 222 ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, 223 const void *data, size_t len); 224 ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, 225 const void *data, size_t len); 226 ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, 227 size_t len); 228 int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi); 229 int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi); 230 int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode); 231 int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format); 232 int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi); 233 int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi); 234 int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi); 235 int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi); 236 int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, 237 u16 end); 238 int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, 239 u16 end); 240 int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi); 241 int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, 242 enum mipi_dsi_dcs_tear_mode mode); 243 int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format); 244 245 /** 246 * struct mipi_dsi_driver - DSI driver 247 * @driver: device driver model driver 248 * @probe: callback for device binding 249 * @remove: callback for device unbinding 250 * @shutdown: called at shutdown time to quiesce the device 251 */ 252 struct mipi_dsi_driver { 253 struct device_driver driver; 254 int(*probe)(struct mipi_dsi_device *dsi); 255 int(*remove)(struct mipi_dsi_device *dsi); 256 void (*shutdown)(struct mipi_dsi_device *dsi); 257 }; 258 259 static inline struct mipi_dsi_driver * 260 to_mipi_dsi_driver(struct device_driver *driver) 261 { 262 return container_of(driver, struct mipi_dsi_driver, driver); 263 } 264 265 static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi) 266 { 267 return dev_get_drvdata(&dsi->dev); 268 } 269 270 static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data) 271 { 272 dev_set_drvdata(&dsi->dev, data); 273 } 274 275 int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver, 276 struct module *owner); 277 void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver); 278 279 #define mipi_dsi_driver_register(driver) \ 280 mipi_dsi_driver_register_full(driver, THIS_MODULE) 281 282 #define module_mipi_dsi_driver(__mipi_dsi_driver) \ 283 module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \ 284 mipi_dsi_driver_unregister) 285 286 #endif /* __DRM_MIPI_DSI__ */ 287