1 /* 2 * Copyright (C) 2009 Francisco Jerez. 3 * All Rights Reserved. 4 * 5 * Permission is hereby granted, free of charge, to any person obtaining 6 * a copy of this software and associated documentation files (the 7 * "Software"), to deal in the Software without restriction, including 8 * without limitation the rights to use, copy, modify, merge, publish, 9 * distribute, sublicense, and/or sell copies of the Software, and to 10 * permit persons to whom the Software is furnished to do so, subject to 11 * the following conditions: 12 * 13 * The above copyright notice and this permission notice (including the 14 * next paragraph) shall be included in all copies or substantial 15 * portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 18 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 19 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 20 * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE 21 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION 22 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION 23 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 24 * 25 */ 26 27 #ifndef __DRM_ENCODER_SLAVE_H__ 28 #define __DRM_ENCODER_SLAVE_H__ 29 30 #include <drm/drm_crtc.h> 31 #include <drm/drm_encoder.h> 32 33 /** 34 * struct drm_encoder_slave_funcs - Entry points exposed by a slave encoder driver 35 * @set_config: Initialize any encoder-specific modesetting parameters. 36 * The meaning of the @params parameter is implementation 37 * dependent. It will usually be a structure with DVO port 38 * data format settings or timings. It's not required for 39 * the new parameters to take effect until the next mode 40 * is set. 41 * 42 * Most of its members are analogous to the function pointers in 43 * &drm_encoder_helper_funcs and they can optionally be used to 44 * initialize the latter. Connector-like methods (e.g. @get_modes and 45 * @set_property) will typically be wrapped around and only be called 46 * if the encoder is the currently selected one for the connector. 47 */ 48 struct drm_encoder_slave_funcs { 49 void (*set_config)(struct drm_encoder *encoder, 50 void *params); 51 52 void (*destroy)(struct drm_encoder *encoder); 53 void (*dpms)(struct drm_encoder *encoder, int mode); 54 void (*save)(struct drm_encoder *encoder); 55 void (*restore)(struct drm_encoder *encoder); 56 bool (*mode_fixup)(struct drm_encoder *encoder, 57 const struct drm_display_mode *mode, 58 struct drm_display_mode *adjusted_mode); 59 int (*mode_valid)(struct drm_encoder *encoder, 60 struct drm_display_mode *mode); 61 void (*mode_set)(struct drm_encoder *encoder, 62 struct drm_display_mode *mode, 63 struct drm_display_mode *adjusted_mode); 64 65 enum drm_connector_status (*detect)(struct drm_encoder *encoder, 66 struct drm_connector *connector); 67 int (*get_modes)(struct drm_encoder *encoder, 68 struct drm_connector *connector); 69 int (*create_resources)(struct drm_encoder *encoder, 70 struct drm_connector *connector); 71 int (*set_property)(struct drm_encoder *encoder, 72 struct drm_connector *connector, 73 struct drm_property *property, 74 uint64_t val); 75 76 }; 77 78 /** 79 * struct drm_encoder_slave - Slave encoder struct 80 * @base: DRM encoder object. 81 * @slave_funcs: Slave encoder callbacks. 82 * @slave_priv: Slave encoder private data. 83 * @bus_priv: Bus specific data. 84 * 85 * A &drm_encoder_slave has two sets of callbacks, @slave_funcs and the 86 * ones in @base. The former are never actually called by the common 87 * CRTC code, it's just a convenience for splitting the encoder 88 * functions in an upper, GPU-specific layer and a (hopefully) 89 * GPU-agnostic lower layer: It's the GPU driver responsibility to 90 * call the slave methods when appropriate. 91 * 92 * drm_i2c_encoder_init() provides a way to get an implementation of 93 * this. 94 */ 95 struct drm_encoder_slave { 96 struct drm_encoder base; 97 98 const struct drm_encoder_slave_funcs *slave_funcs; 99 void *slave_priv; 100 void *bus_priv; 101 }; 102 #define to_encoder_slave(x) container_of((x), struct drm_encoder_slave, base) 103 104 int drm_i2c_encoder_init(struct drm_device *dev, 105 struct drm_encoder_slave *encoder, 106 struct i2c_adapter *adap, 107 const struct i2c_board_info *info); 108 109 110 /** 111 * struct drm_i2c_encoder_driver 112 * 113 * Describes a device driver for an encoder connected to the GPU 114 * through an I2C bus. In addition to the entry points in @i2c_driver 115 * an @encoder_init function should be provided. It will be called to 116 * give the driver an opportunity to allocate any per-encoder data 117 * structures and to initialize the @slave_funcs and (optionally) 118 * @slave_priv members of @encoder. 119 */ 120 struct drm_i2c_encoder_driver { 121 struct i2c_driver i2c_driver; 122 123 int (*encoder_init)(struct i2c_client *client, 124 struct drm_device *dev, 125 struct drm_encoder_slave *encoder); 126 127 }; 128 #define to_drm_i2c_encoder_driver(x) container_of((x), \ 129 struct drm_i2c_encoder_driver, \ 130 i2c_driver) 131 132 /** 133 * drm_i2c_encoder_get_client - Get the I2C client corresponding to an encoder 134 */ 135 static inline struct i2c_client *drm_i2c_encoder_get_client(struct drm_encoder *encoder) 136 { 137 return (struct i2c_client *)to_encoder_slave(encoder)->bus_priv; 138 } 139 140 /** 141 * drm_i2c_encoder_register - Register an I2C encoder driver 142 * @owner: Module containing the driver. 143 * @driver: Driver to be registered. 144 */ 145 static inline int drm_i2c_encoder_register(struct module *owner, 146 struct drm_i2c_encoder_driver *driver) 147 { 148 return i2c_register_driver(owner, &driver->i2c_driver); 149 } 150 151 /** 152 * drm_i2c_encoder_unregister - Unregister an I2C encoder driver 153 * @driver: Driver to be unregistered. 154 */ 155 static inline void drm_i2c_encoder_unregister(struct drm_i2c_encoder_driver *driver) 156 { 157 i2c_del_driver(&driver->i2c_driver); 158 } 159 160 void drm_i2c_encoder_destroy(struct drm_encoder *encoder); 161 162 163 /* 164 * Wrapper fxns which can be plugged in to drm_encoder_helper_funcs: 165 */ 166 167 void drm_i2c_encoder_dpms(struct drm_encoder *encoder, int mode); 168 bool drm_i2c_encoder_mode_fixup(struct drm_encoder *encoder, 169 const struct drm_display_mode *mode, 170 struct drm_display_mode *adjusted_mode); 171 void drm_i2c_encoder_prepare(struct drm_encoder *encoder); 172 void drm_i2c_encoder_commit(struct drm_encoder *encoder); 173 void drm_i2c_encoder_mode_set(struct drm_encoder *encoder, 174 struct drm_display_mode *mode, 175 struct drm_display_mode *adjusted_mode); 176 enum drm_connector_status drm_i2c_encoder_detect(struct drm_encoder *encoder, 177 struct drm_connector *connector); 178 void drm_i2c_encoder_save(struct drm_encoder *encoder); 179 void drm_i2c_encoder_restore(struct drm_encoder *encoder); 180 181 182 #endif 183