1 /* 2 * Copyright (c) 2016 Intel Corporation 3 * 4 * Permission to use, copy, modify, distribute, and sell this software and its 5 * documentation for any purpose is hereby granted without fee, provided that 6 * the above copyright notice appear in all copies and that both that copyright 7 * notice and this permission notice appear in supporting documentation, and 8 * that the name of the copyright holders not be used in advertising or 9 * publicity pertaining to distribution of the software without specific, 10 * written prior permission. The copyright holders make no representations 11 * about the suitability of this software for any purpose. It is provided "as 12 * is" without express or implied warranty. 13 * 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 20 * OF THIS SOFTWARE. 21 */ 22 23 #ifndef __DRM_ENCODER_H__ 24 #define __DRM_ENCODER_H__ 25 26 #include <linux/list.h> 27 #include <linux/ctype.h> 28 #include <drm/drm_crtc.h> 29 #include <drm/drm_mode.h> 30 #include <drm/drm_mode_object.h> 31 #include <drm/drm_util.h> 32 33 struct drm_encoder; 34 35 /** 36 * struct drm_encoder_funcs - encoder controls 37 * 38 * Encoders sit between CRTCs and connectors. 39 */ 40 struct drm_encoder_funcs { 41 /** 42 * @reset: 43 * 44 * Reset encoder hardware and software state to off. This function isn't 45 * called by the core directly, only through drm_mode_config_reset(). 46 * It's not a helper hook only for historical reasons. 47 */ 48 void (*reset)(struct drm_encoder *encoder); 49 50 /** 51 * @destroy: 52 * 53 * Clean up encoder resources. This is only called at driver unload time 54 * through drm_mode_config_cleanup() since an encoder cannot be 55 * hotplugged in DRM. 56 */ 57 void (*destroy)(struct drm_encoder *encoder); 58 59 /** 60 * @late_register: 61 * 62 * This optional hook can be used to register additional userspace 63 * interfaces attached to the encoder like debugfs interfaces. 64 * It is called late in the driver load sequence from drm_dev_register(). 65 * Everything added from this callback should be unregistered in 66 * the early_unregister callback. 67 * 68 * Returns: 69 * 70 * 0 on success, or a negative error code on failure. 71 */ 72 int (*late_register)(struct drm_encoder *encoder); 73 74 /** 75 * @early_unregister: 76 * 77 * This optional hook should be used to unregister the additional 78 * userspace interfaces attached to the encoder from 79 * @late_register. It is called from drm_dev_unregister(), 80 * early in the driver unload sequence to disable userspace access 81 * before data structures are torndown. 82 */ 83 void (*early_unregister)(struct drm_encoder *encoder); 84 }; 85 86 /** 87 * struct drm_encoder - central DRM encoder structure 88 * @dev: parent DRM device 89 * @head: list management 90 * @base: base KMS object 91 * @name: human readable name, can be overwritten by the driver 92 * @funcs: control functions, can be NULL for simple managed encoders 93 * @helper_private: mid-layer private data 94 * 95 * CRTCs drive pixels to encoders, which convert them into signals 96 * appropriate for a given connector or set of connectors. 97 */ 98 struct drm_encoder { 99 struct drm_device *dev; 100 struct list_head head; 101 102 struct drm_mode_object base; 103 char *name; 104 /** 105 * @encoder_type: 106 * 107 * One of the DRM_MODE_ENCODER_<foo> types in drm_mode.h. The following 108 * encoder types are defined thus far: 109 * 110 * - DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A. 111 * 112 * - DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort. 113 * 114 * - DRM_MODE_ENCODER_LVDS for display panels, or in general any panel 115 * with a proprietary parallel connector. 116 * 117 * - DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video, 118 * Component, SCART). 119 * 120 * - DRM_MODE_ENCODER_VIRTUAL for virtual machine displays 121 * 122 * - DRM_MODE_ENCODER_DSI for panels connected using the DSI serial bus. 123 * 124 * - DRM_MODE_ENCODER_DPI for panels connected using the DPI parallel 125 * bus. 126 * 127 * - DRM_MODE_ENCODER_DPMST for special fake encoders used to allow 128 * mutliple DP MST streams to share one physical encoder. 129 */ 130 int encoder_type; 131 132 /** 133 * @index: Position inside the mode_config.list, can be used as an array 134 * index. It is invariant over the lifetime of the encoder. 135 */ 136 unsigned index; 137 138 /** 139 * @possible_crtcs: Bitmask of potential CRTC bindings, using 140 * drm_crtc_index() as the index into the bitfield. The driver must set 141 * the bits for all &drm_crtc objects this encoder can be connected to 142 * before calling drm_dev_register(). 143 * 144 * You will get a WARN if you get this wrong in the driver. 145 * 146 * Note that since CRTC objects can't be hotplugged the assigned indices 147 * are stable and hence known before registering all objects. 148 */ 149 uint32_t possible_crtcs; 150 151 /** 152 * @possible_clones: Bitmask of potential sibling encoders for cloning, 153 * using drm_encoder_index() as the index into the bitfield. The driver 154 * must set the bits for all &drm_encoder objects which can clone a 155 * &drm_crtc together with this encoder before calling 156 * drm_dev_register(). Drivers should set the bit representing the 157 * encoder itself, too. Cloning bits should be set such that when two 158 * encoders can be used in a cloned configuration, they both should have 159 * each another bits set. 160 * 161 * As an exception to the above rule if the driver doesn't implement 162 * any cloning it can leave @possible_clones set to 0. The core will 163 * automagically fix this up by setting the bit for the encoder itself. 164 * 165 * You will get a WARN if you get this wrong in the driver. 166 * 167 * Note that since encoder objects can't be hotplugged the assigned indices 168 * are stable and hence known before registering all objects. 169 */ 170 uint32_t possible_clones; 171 172 /** 173 * @crtc: Currently bound CRTC, only really meaningful for non-atomic 174 * drivers. Atomic drivers should instead check 175 * &drm_connector_state.crtc. 176 */ 177 struct drm_crtc *crtc; 178 179 /** 180 * @bridge_chain: Bridges attached to this encoder. Drivers shall not 181 * access this field directly. 182 */ 183 struct list_head bridge_chain; 184 185 const struct drm_encoder_funcs *funcs; 186 const struct drm_encoder_helper_funcs *helper_private; 187 }; 188 189 #define obj_to_encoder(x) container_of(x, struct drm_encoder, base) 190 191 __printf(5, 6) 192 int drm_encoder_init(struct drm_device *dev, 193 struct drm_encoder *encoder, 194 const struct drm_encoder_funcs *funcs, 195 int encoder_type, const char *name, ...); 196 197 __printf(5, 6) 198 int drmm_encoder_init(struct drm_device *dev, 199 struct drm_encoder *encoder, 200 const struct drm_encoder_funcs *funcs, 201 int encoder_type, const char *name, ...); 202 203 __printf(6, 7) 204 void *__drmm_encoder_alloc(struct drm_device *dev, 205 size_t size, size_t offset, 206 const struct drm_encoder_funcs *funcs, 207 int encoder_type, 208 const char *name, ...); 209 210 /** 211 * drmm_encoder_alloc - Allocate and initialize an encoder 212 * @dev: drm device 213 * @type: the type of the struct which contains struct &drm_encoder 214 * @member: the name of the &drm_encoder within @type 215 * @funcs: callbacks for this encoder (optional) 216 * @encoder_type: user visible type of the encoder 217 * @name: printf style format string for the encoder name, or NULL for default name 218 * 219 * Allocates and initializes an encoder. Encoder should be subclassed as part of 220 * driver encoder objects. Cleanup is automatically handled through registering 221 * drm_encoder_cleanup() with drmm_add_action(). 222 * 223 * The @drm_encoder_funcs.destroy hook must be NULL. 224 * 225 * Returns: 226 * Pointer to new encoder, or ERR_PTR on failure. 227 */ 228 #define drmm_encoder_alloc(dev, type, member, funcs, encoder_type, name, ...) \ 229 ((type *)__drmm_encoder_alloc(dev, sizeof(type), \ 230 offsetof(type, member), funcs, \ 231 encoder_type, name, ##__VA_ARGS__)) 232 233 /** 234 * drmm_plain_encoder_alloc - Allocate and initialize an encoder 235 * @dev: drm device 236 * @funcs: callbacks for this encoder (optional) 237 * @encoder_type: user visible type of the encoder 238 * @name: printf style format string for the encoder name, or NULL for default name 239 * 240 * This is a simplified version of drmm_encoder_alloc(), which only allocates 241 * and returns a struct drm_encoder instance, with no subclassing. 242 * 243 * Returns: 244 * Pointer to the new drm_encoder struct, or ERR_PTR on failure. 245 */ 246 #define drmm_plain_encoder_alloc(dev, funcs, encoder_type, name, ...) \ 247 ((struct drm_encoder *) \ 248 __drmm_encoder_alloc(dev, sizeof(struct drm_encoder), \ 249 0, funcs, encoder_type, name, ##__VA_ARGS__)) 250 251 /** 252 * drm_encoder_index - find the index of a registered encoder 253 * @encoder: encoder to find index for 254 * 255 * Given a registered encoder, return the index of that encoder within a DRM 256 * device's list of encoders. 257 */ 258 static inline unsigned int drm_encoder_index(const struct drm_encoder *encoder) 259 { 260 return encoder->index; 261 } 262 263 /** 264 * drm_encoder_mask - find the mask of a registered encoder 265 * @encoder: encoder to find mask for 266 * 267 * Given a registered encoder, return the mask bit of that encoder for an 268 * encoder's possible_clones field. 269 */ 270 static inline u32 drm_encoder_mask(const struct drm_encoder *encoder) 271 { 272 return 1 << drm_encoder_index(encoder); 273 } 274 275 /** 276 * drm_encoder_crtc_ok - can a given crtc drive a given encoder? 277 * @encoder: encoder to test 278 * @crtc: crtc to test 279 * 280 * Returns false if @encoder can't be driven by @crtc, true otherwise. 281 */ 282 static inline bool drm_encoder_crtc_ok(struct drm_encoder *encoder, 283 struct drm_crtc *crtc) 284 { 285 return !!(encoder->possible_crtcs & drm_crtc_mask(crtc)); 286 } 287 288 /** 289 * drm_encoder_find - find a &drm_encoder 290 * @dev: DRM device 291 * @file_priv: drm file to check for lease against. 292 * @id: encoder id 293 * 294 * Returns the encoder with @id, NULL if it doesn't exist. Simple wrapper around 295 * drm_mode_object_find(). 296 */ 297 static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev, 298 struct drm_file *file_priv, 299 uint32_t id) 300 { 301 struct drm_mode_object *mo; 302 303 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_ENCODER); 304 305 return mo ? obj_to_encoder(mo) : NULL; 306 } 307 308 void drm_encoder_cleanup(struct drm_encoder *encoder); 309 310 /** 311 * drm_for_each_encoder_mask - iterate over encoders specified by bitmask 312 * @encoder: the loop cursor 313 * @dev: the DRM device 314 * @encoder_mask: bitmask of encoder indices 315 * 316 * Iterate over all encoders specified by bitmask. 317 */ 318 #define drm_for_each_encoder_mask(encoder, dev, encoder_mask) \ 319 list_for_each_entry((encoder), &(dev)->mode_config.encoder_list, head) \ 320 for_each_if ((encoder_mask) & drm_encoder_mask(encoder)) 321 322 /** 323 * drm_for_each_encoder - iterate over all encoders 324 * @encoder: the loop cursor 325 * @dev: the DRM device 326 * 327 * Iterate over all encoders of @dev. 328 */ 329 #define drm_for_each_encoder(encoder, dev) \ 330 list_for_each_entry(encoder, &(dev)->mode_config.encoder_list, head) 331 332 #endif 333