xref: /openbmc/linux/include/drm/drm_device.h (revision 3e30a927)
1 #ifndef _DRM_DEVICE_H_
2 #define _DRM_DEVICE_H_
3 
4 #include <linux/list.h>
5 #include <linux/kref.h>
6 #include <linux/mutex.h>
7 #include <linux/idr.h>
8 
9 #include <drm/drm_hashtab.h>
10 #include <drm/drm_mode_config.h>
11 
12 struct drm_driver;
13 struct drm_minor;
14 struct drm_master;
15 struct drm_device_dma;
16 struct drm_vblank_crtc;
17 struct drm_sg_mem;
18 struct drm_local_map;
19 struct drm_vma_offset_manager;
20 struct drm_vram_mm;
21 struct drm_fb_helper;
22 
23 struct inode;
24 
25 struct pci_dev;
26 struct pci_controller;
27 
28 
29 /**
30  * enum drm_switch_power - power state of drm device
31  */
32 
33 enum switch_power_state {
34 	/** @DRM_SWITCH_POWER_ON: Power state is ON */
35 	DRM_SWITCH_POWER_ON = 0,
36 
37 	/** @DRM_SWITCH_POWER_OFF: Power state is OFF */
38 	DRM_SWITCH_POWER_OFF = 1,
39 
40 	/** @DRM_SWITCH_POWER_CHANGING: Power state is changing */
41 	DRM_SWITCH_POWER_CHANGING = 2,
42 
43 	/** @DRM_SWITCH_POWER_DYNAMIC_OFF: Suspended */
44 	DRM_SWITCH_POWER_DYNAMIC_OFF = 3,
45 };
46 
47 /**
48  * struct drm_device - DRM device structure
49  *
50  * This structure represent a complete card that
51  * may contain multiple heads.
52  */
53 struct drm_device {
54 	/**
55 	 * @legacy_dev_list:
56 	 *
57 	 * List of devices per driver for stealth attach cleanup
58 	 */
59 	struct list_head legacy_dev_list;
60 
61 	/** @if_version: Highest interface version set */
62 	int if_version;
63 
64 	/** @ref: Object ref-count */
65 	struct kref ref;
66 
67 	/** @dev: Device structure of bus-device */
68 	struct device *dev;
69 
70 	/** @driver: DRM driver managing the device */
71 	struct drm_driver *driver;
72 
73 	/**
74 	 * @dev_private:
75 	 *
76 	 * DRM driver private data. Instead of using this pointer it is
77 	 * recommended that drivers use drm_dev_init() and embed struct
78 	 * &drm_device in their larger per-device structure.
79 	 */
80 	void *dev_private;
81 
82 	/** @primary: Primary node */
83 	struct drm_minor *primary;
84 
85 	/** @render: Render node */
86 	struct drm_minor *render;
87 
88 	/**
89 	 * @registered:
90 	 *
91 	 * Internally used by drm_dev_register() and drm_connector_register().
92 	 */
93 	bool registered;
94 
95 	/**
96 	 * @master:
97 	 *
98 	 * Currently active master for this device.
99 	 * Protected by &master_mutex
100 	 */
101 	struct drm_master *master;
102 
103 	/**
104 	 * @driver_features: per-device driver features
105 	 *
106 	 * Drivers can clear specific flags here to disallow
107 	 * certain features on a per-device basis while still
108 	 * sharing a single &struct drm_driver instance across
109 	 * all devices.
110 	 */
111 	u32 driver_features;
112 
113 	/**
114 	 * @unplugged:
115 	 *
116 	 * Flag to tell if the device has been unplugged.
117 	 * See drm_dev_enter() and drm_dev_is_unplugged().
118 	 */
119 	bool unplugged;
120 
121 	/** @anon_inode: inode for private address-space */
122 	struct inode *anon_inode;
123 
124 	/** @unique: Unique name of the device */
125 	char *unique;
126 
127 	/**
128 	 * @struct_mutex:
129 	 *
130 	 * Lock for others (not &drm_minor.master and &drm_file.is_master)
131 	 */
132 	struct mutex struct_mutex;
133 
134 	/**
135 	 * @master_mutex:
136 	 *
137 	 * Lock for &drm_minor.master and &drm_file.is_master
138 	 */
139 	struct mutex master_mutex;
140 
141 	/**
142 	 * @open_count:
143 	 *
144 	 * Usage counter for outstanding files open,
145 	 * protected by drm_global_mutex
146 	 */
147 	int open_count;
148 
149 	/** @filelist_mutex: Protects @filelist. */
150 	struct mutex filelist_mutex;
151 	/**
152 	 * @filelist:
153 	 *
154 	 * List of userspace clients, linked through &drm_file.lhead.
155 	 */
156 	struct list_head filelist;
157 
158 	/**
159 	 * @filelist_internal:
160 	 *
161 	 * List of open DRM files for in-kernel clients.
162 	 * Protected by &filelist_mutex.
163 	 */
164 	struct list_head filelist_internal;
165 
166 	/**
167 	 * @clientlist_mutex:
168 	 *
169 	 * Protects &clientlist access.
170 	 */
171 	struct mutex clientlist_mutex;
172 
173 	/**
174 	 * @clientlist:
175 	 *
176 	 * List of in-kernel clients. Protected by &clientlist_mutex.
177 	 */
178 	struct list_head clientlist;
179 
180 	/**
181 	 * @irq_enabled:
182 	 *
183 	 * Indicates that interrupt handling is enabled, specifically vblank
184 	 * handling. Drivers which don't use drm_irq_install() need to set this
185 	 * to true manually.
186 	 */
187 	bool irq_enabled;
188 
189 	/**
190 	 * @irq: Used by the drm_irq_install() and drm_irq_unistall() helpers.
191 	 */
192 	int irq;
193 
194 	/**
195 	 * @vblank_disable_immediate:
196 	 *
197 	 * If true, vblank interrupt will be disabled immediately when the
198 	 * refcount drops to zero, as opposed to via the vblank disable
199 	 * timer.
200 	 *
201 	 * This can be set to true it the hardware has a working vblank counter
202 	 * with high-precision timestamping (otherwise there are races) and the
203 	 * driver uses drm_crtc_vblank_on() and drm_crtc_vblank_off()
204 	 * appropriately. See also @max_vblank_count and
205 	 * &drm_crtc_funcs.get_vblank_counter.
206 	 */
207 	bool vblank_disable_immediate;
208 
209 	/**
210 	 * @vblank:
211 	 *
212 	 * Array of vblank tracking structures, one per &struct drm_crtc. For
213 	 * historical reasons (vblank support predates kernel modesetting) this
214 	 * is free-standing and not part of &struct drm_crtc itself. It must be
215 	 * initialized explicitly by calling drm_vblank_init().
216 	 */
217 	struct drm_vblank_crtc *vblank;
218 
219 	/**
220 	 * @vblank_time_lock:
221 	 *
222 	 *  Protects vblank count and time updates during vblank enable/disable
223 	 */
224 	spinlock_t vblank_time_lock;
225 	/**
226 	 * @vbl_lock: Top-level vblank references lock, wraps the low-level
227 	 * @vblank_time_lock.
228 	 */
229 	spinlock_t vbl_lock;
230 
231 	/**
232 	 * @max_vblank_count:
233 	 *
234 	 * Maximum value of the vblank registers. This value +1 will result in a
235 	 * wrap-around of the vblank register. It is used by the vblank core to
236 	 * handle wrap-arounds.
237 	 *
238 	 * If set to zero the vblank core will try to guess the elapsed vblanks
239 	 * between times when the vblank interrupt is disabled through
240 	 * high-precision timestamps. That approach is suffering from small
241 	 * races and imprecision over longer time periods, hence exposing a
242 	 * hardware vblank counter is always recommended.
243 	 *
244 	 * This is the statically configured device wide maximum. The driver
245 	 * can instead choose to use a runtime configurable per-crtc value
246 	 * &drm_vblank_crtc.max_vblank_count, in which case @max_vblank_count
247 	 * must be left at zero. See drm_crtc_set_max_vblank_count() on how
248 	 * to use the per-crtc value.
249 	 *
250 	 * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set.
251 	 */
252 	u32 max_vblank_count;
253 
254 	/** @vblank_event_list: List of vblank events */
255 	struct list_head vblank_event_list;
256 
257 	/**
258 	 * @event_lock:
259 	 *
260 	 * Protects @vblank_event_list and event delivery in
261 	 * general. See drm_send_event() and drm_send_event_locked().
262 	 */
263 	spinlock_t event_lock;
264 
265 	/** @agp: AGP data */
266 	struct drm_agp_head *agp;
267 
268 	/** @pdev: PCI device structure */
269 	struct pci_dev *pdev;
270 
271 #ifdef __alpha__
272 	/** @hose: PCI hose, only used on ALPHA platforms. */
273 	struct pci_controller *hose;
274 #endif
275 	/** @num_crtcs: Number of CRTCs on this device */
276 	unsigned int num_crtcs;
277 
278 	/** @mode_config: Current mode config */
279 	struct drm_mode_config mode_config;
280 
281 	/** @object_name_lock: GEM information */
282 	struct mutex object_name_lock;
283 
284 	/** @object_name_idr: GEM information */
285 	struct idr object_name_idr;
286 
287 	/** @vma_offset_manager: GEM information */
288 	struct drm_vma_offset_manager *vma_offset_manager;
289 
290 	/** @vram_mm: VRAM MM memory manager */
291 	struct drm_vram_mm *vram_mm;
292 
293 	/**
294 	 * @switch_power_state:
295 	 *
296 	 * Power state of the client.
297 	 * Used by drivers supporting the switcheroo driver.
298 	 * The state is maintained in the
299 	 * &vga_switcheroo_client_ops.set_gpu_state callback
300 	 */
301 	enum switch_power_state switch_power_state;
302 
303 	/**
304 	 * @fb_helper:
305 	 *
306 	 * Pointer to the fbdev emulation structure.
307 	 * Set by drm_fb_helper_init() and cleared by drm_fb_helper_fini().
308 	 */
309 	struct drm_fb_helper *fb_helper;
310 
311 	/* Everything below here is for legacy driver, never use! */
312 	/* private: */
313 #if IS_ENABLED(CONFIG_DRM_LEGACY)
314 	/* Context handle management - linked list of context handles */
315 	struct list_head ctxlist;
316 
317 	/* Context handle management - mutex for &ctxlist */
318 	struct mutex ctxlist_mutex;
319 
320 	/* Context handle management */
321 	struct idr ctx_idr;
322 
323 	/* Memory management - linked list of regions */
324 	struct list_head maplist;
325 
326 	/* Memory management - user token hash table for maps */
327 	struct drm_open_hash map_hash;
328 
329 	/* Context handle management - list of vmas (for debugging) */
330 	struct list_head vmalist;
331 
332 	/* Optional pointer for DMA support */
333 	struct drm_device_dma *dma;
334 
335 	/* Context swapping flag */
336 	__volatile__ long context_flag;
337 
338 	/* Last current context */
339 	int last_context;
340 
341 	/* Lock for &buf_use and a few other things. */
342 	spinlock_t buf_lock;
343 
344 	/* Usage counter for buffers in use -- cannot alloc */
345 	int buf_use;
346 
347 	/* Buffer allocation in progress */
348 	atomic_t buf_alloc;
349 
350 	struct {
351 		int context;
352 		struct drm_hw_lock *lock;
353 	} sigdata;
354 
355 	struct drm_local_map *agp_buffer_map;
356 	unsigned int agp_buffer_token;
357 
358 	/* Scatter gather memory */
359 	struct drm_sg_mem *sg;
360 #endif
361 };
362 
363 #endif
364