1 /* 2 * Copyright © 2006 Keith Packard 3 * Copyright © 2007-2008 Dave Airlie 4 * Copyright © 2007-2008 Intel Corporation 5 * Jesse Barnes <jesse.barnes@intel.com> 6 * 7 * Permission is hereby granted, free of charge, to any person obtaining a 8 * copy of this software and associated documentation files (the "Software"), 9 * to deal in the Software without restriction, including without limitation 10 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 11 * and/or sell copies of the Software, and to permit persons to whom the 12 * Software is furnished to do so, subject to the following conditions: 13 * 14 * The above copyright notice and this permission notice shall be included in 15 * all copies or substantial portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR 21 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 22 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 23 * OTHER DEALINGS IN THE SOFTWARE. 24 */ 25 #ifndef __DRM_CRTC_H__ 26 #define __DRM_CRTC_H__ 27 28 #include <linux/i2c.h> 29 #include <linux/spinlock.h> 30 #include <linux/types.h> 31 #include <linux/fb.h> 32 #include <linux/hdmi.h> 33 #include <linux/media-bus-format.h> 34 #include <uapi/drm/drm_mode.h> 35 #include <uapi/drm/drm_fourcc.h> 36 #include <drm/drm_modeset_lock.h> 37 #include <drm/drm_rect.h> 38 #include <drm/drm_mode_object.h> 39 #include <drm/drm_framebuffer.h> 40 #include <drm/drm_modes.h> 41 #include <drm/drm_connector.h> 42 #include <drm/drm_property.h> 43 #include <drm/drm_bridge.h> 44 #include <drm/drm_edid.h> 45 #include <drm/drm_plane.h> 46 #include <drm/drm_blend.h> 47 #include <drm/drm_color_mgmt.h> 48 #include <drm/drm_debugfs_crc.h> 49 #include <drm/drm_mode_config.h> 50 51 struct drm_device; 52 struct drm_mode_set; 53 struct drm_file; 54 struct drm_clip_rect; 55 struct drm_printer; 56 struct device_node; 57 struct dma_fence; 58 struct edid; 59 60 static inline int64_t U642I64(uint64_t val) 61 { 62 return (int64_t)*((int64_t *)&val); 63 } 64 static inline uint64_t I642U64(int64_t val) 65 { 66 return (uint64_t)*((uint64_t *)&val); 67 } 68 69 struct drm_crtc; 70 struct drm_pending_vblank_event; 71 struct drm_plane; 72 struct drm_bridge; 73 struct drm_atomic_state; 74 75 struct drm_crtc_helper_funcs; 76 struct drm_plane_helper_funcs; 77 78 /** 79 * struct drm_crtc_state - mutable CRTC state 80 * 81 * Note that the distinction between @enable and @active is rather subtle: 82 * Flipping @active while @enable is set without changing anything else may 83 * never return in a failure from the &drm_mode_config_funcs.atomic_check 84 * callback. Userspace assumes that a DPMS On will always succeed. In other 85 * words: @enable controls resource assignment, @active controls the actual 86 * hardware state. 87 * 88 * The three booleans active_changed, connectors_changed and mode_changed are 89 * intended to indicate whether a full modeset is needed, rather than strictly 90 * describing what has changed in a commit. See also: 91 * drm_atomic_crtc_needs_modeset() 92 * 93 * WARNING: Transitional helpers (like drm_helper_crtc_mode_set() or 94 * drm_helper_crtc_mode_set_base()) do not maintain many of the derived control 95 * state like @plane_mask so drivers not converted over to atomic helpers should 96 * not rely on these being accurate! 97 */ 98 struct drm_crtc_state { 99 /** @crtc: backpointer to the CRTC */ 100 struct drm_crtc *crtc; 101 102 /** 103 * @enable: Whether the CRTC should be enabled, gates all other state. 104 * This controls reservations of shared resources. Actual hardware state 105 * is controlled by @active. 106 */ 107 bool enable; 108 109 /** 110 * @active: Whether the CRTC is actively displaying (used for DPMS). 111 * Implies that @enable is set. The driver must not release any shared 112 * resources if @active is set to false but @enable still true, because 113 * userspace expects that a DPMS ON always succeeds. 114 * 115 * Hence drivers must not consult @active in their various 116 * &drm_mode_config_funcs.atomic_check callback to reject an atomic 117 * commit. They can consult it to aid in the computation of derived 118 * hardware state, since even in the DPMS OFF state the display hardware 119 * should be as much powered down as when the CRTC is completely 120 * disabled through setting @enable to false. 121 */ 122 bool active; 123 124 /** 125 * @planes_changed: Planes on this crtc are updated. Used by the atomic 126 * helpers and drivers to steer the atomic commit control flow. 127 */ 128 bool planes_changed : 1; 129 130 /** 131 * @mode_changed: @mode or @enable has been changed. Used by the atomic 132 * helpers and drivers to steer the atomic commit control flow. See also 133 * drm_atomic_crtc_needs_modeset(). 134 * 135 * Drivers are supposed to set this for any CRTC state changes that 136 * require a full modeset. They can also reset it to false if e.g. a 137 * @mode change can be done without a full modeset by only changing 138 * scaler settings. 139 */ 140 bool mode_changed : 1; 141 142 /** 143 * @active_changed: @active has been toggled. Used by the atomic 144 * helpers and drivers to steer the atomic commit control flow. See also 145 * drm_atomic_crtc_needs_modeset(). 146 */ 147 bool active_changed : 1; 148 149 /** 150 * @connectors_changed: Connectors to this crtc have been updated, 151 * either in their state or routing. Used by the atomic 152 * helpers and drivers to steer the atomic commit control flow. See also 153 * drm_atomic_crtc_needs_modeset(). 154 * 155 * Drivers are supposed to set this as-needed from their own atomic 156 * check code, e.g. from &drm_encoder_helper_funcs.atomic_check 157 */ 158 bool connectors_changed : 1; 159 /** 160 * @zpos_changed: zpos values of planes on this crtc have been updated. 161 * Used by the atomic helpers and drivers to steer the atomic commit 162 * control flow. 163 */ 164 bool zpos_changed : 1; 165 /** 166 * @color_mgmt_changed: Color management properties have changed 167 * (@gamma_lut, @degamma_lut or @ctm). Used by the atomic helpers and 168 * drivers to steer the atomic commit control flow. 169 */ 170 bool color_mgmt_changed : 1; 171 172 /** 173 * @no_vblank: 174 * 175 * Reflects the ability of a CRTC to send VBLANK events. This state 176 * usually depends on the pipeline configuration, and the main usuage 177 * is CRTCs feeding a writeback connector operating in oneshot mode. 178 * In this case the VBLANK event is only generated when a job is queued 179 * to the writeback connector, and we want the core to fake VBLANK 180 * events when this part of the pipeline hasn't changed but others had 181 * or when the CRTC and connectors are being disabled. 182 * 183 * __drm_atomic_helper_crtc_duplicate_state() will not reset the value 184 * from the current state, the CRTC driver is then responsible for 185 * updating this field when needed. 186 * 187 * Note that the combination of &drm_crtc_state.event == NULL and 188 * &drm_crtc_state.no_blank == true is valid and usually used when the 189 * writeback connector attached to the CRTC has a new job queued. In 190 * this case the driver will send the VBLANK event on its own when the 191 * writeback job is complete. 192 */ 193 bool no_vblank : 1; 194 195 /** 196 * @plane_mask: Bitmask of drm_plane_mask(plane) of planes attached to 197 * this CRTC. 198 */ 199 u32 plane_mask; 200 201 /** 202 * @connector_mask: Bitmask of drm_connector_mask(connector) of 203 * connectors attached to this CRTC. 204 */ 205 u32 connector_mask; 206 207 /** 208 * @encoder_mask: Bitmask of drm_encoder_mask(encoder) of encoders 209 * attached to this CRTC. 210 */ 211 u32 encoder_mask; 212 213 /** 214 * @adjusted_mode: 215 * 216 * Internal display timings which can be used by the driver to handle 217 * differences between the mode requested by userspace in @mode and what 218 * is actually programmed into the hardware. 219 * 220 * For drivers using &drm_bridge, this stores hardware display timings 221 * used between the CRTC and the first bridge. For other drivers, the 222 * meaning of the adjusted_mode field is purely driver implementation 223 * defined information, and will usually be used to store the hardware 224 * display timings used between the CRTC and encoder blocks. 225 */ 226 struct drm_display_mode adjusted_mode; 227 228 /** 229 * @mode: 230 * 231 * Display timings requested by userspace. The driver should try to 232 * match the refresh rate as close as possible (but note that it's 233 * undefined what exactly is close enough, e.g. some of the HDMI modes 234 * only differ in less than 1% of the refresh rate). The active width 235 * and height as observed by userspace for positioning planes must match 236 * exactly. 237 * 238 * For external connectors where the sink isn't fixed (like with a 239 * built-in panel), this mode here should match the physical mode on the 240 * wire to the last details (i.e. including sync polarities and 241 * everything). 242 */ 243 struct drm_display_mode mode; 244 245 /** 246 * @mode_blob: &drm_property_blob for @mode, for exposing the mode to 247 * atomic userspace. 248 */ 249 struct drm_property_blob *mode_blob; 250 251 /** 252 * @degamma_lut: 253 * 254 * Lookup table for converting framebuffer pixel data before apply the 255 * color conversion matrix @ctm. See drm_crtc_enable_color_mgmt(). The 256 * blob (if not NULL) is an array of &struct drm_color_lut. 257 */ 258 struct drm_property_blob *degamma_lut; 259 260 /** 261 * @ctm: 262 * 263 * Color transformation matrix. See drm_crtc_enable_color_mgmt(). The 264 * blob (if not NULL) is a &struct drm_color_ctm. 265 */ 266 struct drm_property_blob *ctm; 267 268 /** 269 * @gamma_lut: 270 * 271 * Lookup table for converting pixel data after the color conversion 272 * matrix @ctm. See drm_crtc_enable_color_mgmt(). The blob (if not 273 * NULL) is an array of &struct drm_color_lut. 274 */ 275 struct drm_property_blob *gamma_lut; 276 277 /** 278 * @target_vblank: 279 * 280 * Target vertical blank period when a page flip 281 * should take effect. 282 */ 283 u32 target_vblank; 284 285 /** 286 * @pageflip_flags: 287 * 288 * DRM_MODE_PAGE_FLIP_* flags, as passed to the page flip ioctl. 289 * Zero in any other case. 290 */ 291 u32 pageflip_flags; 292 293 /** 294 * @vrr_enabled: 295 * 296 * Indicates if variable refresh rate should be enabled for the CRTC. 297 * Support for the requested vrr state will depend on driver and 298 * hardware capabiltiy - lacking support is not treated as failure. 299 */ 300 bool vrr_enabled; 301 302 /** 303 * @event: 304 * 305 * Optional pointer to a DRM event to signal upon completion of the 306 * state update. The driver must send out the event when the atomic 307 * commit operation completes. There are two cases: 308 * 309 * - The event is for a CRTC which is being disabled through this 310 * atomic commit. In that case the event can be send out any time 311 * after the hardware has stopped scanning out the current 312 * framebuffers. It should contain the timestamp and counter for the 313 * last vblank before the display pipeline was shut off. The simplest 314 * way to achieve that is calling drm_crtc_send_vblank_event() 315 * somewhen after drm_crtc_vblank_off() has been called. 316 * 317 * - For a CRTC which is enabled at the end of the commit (even when it 318 * undergoes an full modeset) the vblank timestamp and counter must 319 * be for the vblank right before the first frame that scans out the 320 * new set of buffers. Again the event can only be sent out after the 321 * hardware has stopped scanning out the old buffers. 322 * 323 * - Events for disabled CRTCs are not allowed, and drivers can ignore 324 * that case. 325 * 326 * This can be handled by the drm_crtc_send_vblank_event() function, 327 * which the driver should call on the provided event upon completion of 328 * the atomic commit. Note that if the driver supports vblank signalling 329 * and timestamping the vblank counters and timestamps must agree with 330 * the ones returned from page flip events. With the current vblank 331 * helper infrastructure this can be achieved by holding a vblank 332 * reference while the page flip is pending, acquired through 333 * drm_crtc_vblank_get() and released with drm_crtc_vblank_put(). 334 * Drivers are free to implement their own vblank counter and timestamp 335 * tracking though, e.g. if they have accurate timestamp registers in 336 * hardware. 337 * 338 * For hardware which supports some means to synchronize vblank 339 * interrupt delivery with committing display state there's also 340 * drm_crtc_arm_vblank_event(). See the documentation of that function 341 * for a detailed discussion of the constraints it needs to be used 342 * safely. 343 * 344 * If the device can't notify of flip completion in a race-free way 345 * at all, then the event should be armed just after the page flip is 346 * committed. In the worst case the driver will send the event to 347 * userspace one frame too late. This doesn't allow for a real atomic 348 * update, but it should avoid tearing. 349 */ 350 struct drm_pending_vblank_event *event; 351 352 /** 353 * @commit: 354 * 355 * This tracks how the commit for this update proceeds through the 356 * various phases. This is never cleared, except when we destroy the 357 * state, so that subsequent commits can synchronize with previous ones. 358 */ 359 struct drm_crtc_commit *commit; 360 361 /** @state: backpointer to global drm_atomic_state */ 362 struct drm_atomic_state *state; 363 }; 364 365 /** 366 * struct drm_crtc_funcs - control CRTCs for a given device 367 * 368 * The drm_crtc_funcs structure is the central CRTC management structure 369 * in the DRM. Each CRTC controls one or more connectors (note that the name 370 * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc. 371 * connectors, not just CRTs). 372 * 373 * Each driver is responsible for filling out this structure at startup time, 374 * in addition to providing other modesetting features, like i2c and DDC 375 * bus accessors. 376 */ 377 struct drm_crtc_funcs { 378 /** 379 * @reset: 380 * 381 * Reset CRTC hardware and software state to off. This function isn't 382 * called by the core directly, only through drm_mode_config_reset(). 383 * It's not a helper hook only for historical reasons. 384 * 385 * Atomic drivers can use drm_atomic_helper_crtc_reset() to reset 386 * atomic state using this hook. 387 */ 388 void (*reset)(struct drm_crtc *crtc); 389 390 /** 391 * @cursor_set: 392 * 393 * Update the cursor image. The cursor position is relative to the CRTC 394 * and can be partially or fully outside of the visible area. 395 * 396 * Note that contrary to all other KMS functions the legacy cursor entry 397 * points don't take a framebuffer object, but instead take directly a 398 * raw buffer object id from the driver's buffer manager (which is 399 * either GEM or TTM for current drivers). 400 * 401 * This entry point is deprecated, drivers should instead implement 402 * universal plane support and register a proper cursor plane using 403 * drm_crtc_init_with_planes(). 404 * 405 * This callback is optional 406 * 407 * RETURNS: 408 * 409 * 0 on success or a negative error code on failure. 410 */ 411 int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv, 412 uint32_t handle, uint32_t width, uint32_t height); 413 414 /** 415 * @cursor_set2: 416 * 417 * Update the cursor image, including hotspot information. The hotspot 418 * must not affect the cursor position in CRTC coordinates, but is only 419 * meant as a hint for virtualized display hardware to coordinate the 420 * guests and hosts cursor position. The cursor hotspot is relative to 421 * the cursor image. Otherwise this works exactly like @cursor_set. 422 * 423 * This entry point is deprecated, drivers should instead implement 424 * universal plane support and register a proper cursor plane using 425 * drm_crtc_init_with_planes(). 426 * 427 * This callback is optional. 428 * 429 * RETURNS: 430 * 431 * 0 on success or a negative error code on failure. 432 */ 433 int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv, 434 uint32_t handle, uint32_t width, uint32_t height, 435 int32_t hot_x, int32_t hot_y); 436 437 /** 438 * @cursor_move: 439 * 440 * Update the cursor position. The cursor does not need to be visible 441 * when this hook is called. 442 * 443 * This entry point is deprecated, drivers should instead implement 444 * universal plane support and register a proper cursor plane using 445 * drm_crtc_init_with_planes(). 446 * 447 * This callback is optional. 448 * 449 * RETURNS: 450 * 451 * 0 on success or a negative error code on failure. 452 */ 453 int (*cursor_move)(struct drm_crtc *crtc, int x, int y); 454 455 /** 456 * @gamma_set: 457 * 458 * Set gamma on the CRTC. 459 * 460 * This callback is optional. 461 * 462 * Atomic drivers who want to support gamma tables should implement the 463 * atomic color management support, enabled by calling 464 * drm_crtc_enable_color_mgmt(), which then supports the legacy gamma 465 * interface through the drm_atomic_helper_legacy_gamma_set() 466 * compatibility implementation. 467 */ 468 int (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, 469 uint32_t size, 470 struct drm_modeset_acquire_ctx *ctx); 471 472 /** 473 * @destroy: 474 * 475 * Clean up CRTC resources. This is only called at driver unload time 476 * through drm_mode_config_cleanup() since a CRTC cannot be hotplugged 477 * in DRM. 478 */ 479 void (*destroy)(struct drm_crtc *crtc); 480 481 /** 482 * @set_config: 483 * 484 * This is the main legacy entry point to change the modeset state on a 485 * CRTC. All the details of the desired configuration are passed in a 486 * &struct drm_mode_set - see there for details. 487 * 488 * Drivers implementing atomic modeset should use 489 * drm_atomic_helper_set_config() to implement this hook. 490 * 491 * RETURNS: 492 * 493 * 0 on success or a negative error code on failure. 494 */ 495 int (*set_config)(struct drm_mode_set *set, 496 struct drm_modeset_acquire_ctx *ctx); 497 498 /** 499 * @page_flip: 500 * 501 * Legacy entry point to schedule a flip to the given framebuffer. 502 * 503 * Page flipping is a synchronization mechanism that replaces the frame 504 * buffer being scanned out by the CRTC with a new frame buffer during 505 * vertical blanking, avoiding tearing (except when requested otherwise 506 * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application 507 * requests a page flip the DRM core verifies that the new frame buffer 508 * is large enough to be scanned out by the CRTC in the currently 509 * configured mode and then calls this hook with a pointer to the new 510 * frame buffer. 511 * 512 * The driver must wait for any pending rendering to the new framebuffer 513 * to complete before executing the flip. It should also wait for any 514 * pending rendering from other drivers if the underlying buffer is a 515 * shared dma-buf. 516 * 517 * An application can request to be notified when the page flip has 518 * completed. The drm core will supply a &struct drm_event in the event 519 * parameter in this case. This can be handled by the 520 * drm_crtc_send_vblank_event() function, which the driver should call on 521 * the provided event upon completion of the flip. Note that if 522 * the driver supports vblank signalling and timestamping the vblank 523 * counters and timestamps must agree with the ones returned from page 524 * flip events. With the current vblank helper infrastructure this can 525 * be achieved by holding a vblank reference while the page flip is 526 * pending, acquired through drm_crtc_vblank_get() and released with 527 * drm_crtc_vblank_put(). Drivers are free to implement their own vblank 528 * counter and timestamp tracking though, e.g. if they have accurate 529 * timestamp registers in hardware. 530 * 531 * This callback is optional. 532 * 533 * NOTE: 534 * 535 * Very early versions of the KMS ABI mandated that the driver must 536 * block (but not reject) any rendering to the old framebuffer until the 537 * flip operation has completed and the old framebuffer is no longer 538 * visible. This requirement has been lifted, and userspace is instead 539 * expected to request delivery of an event and wait with recycling old 540 * buffers until such has been received. 541 * 542 * RETURNS: 543 * 544 * 0 on success or a negative error code on failure. Note that if a 545 * page flip operation is already pending the callback should return 546 * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode 547 * or just runtime disabled through DPMS respectively the new atomic 548 * "ACTIVE" state) should result in an -EINVAL error code. Note that 549 * drm_atomic_helper_page_flip() checks this already for atomic drivers. 550 */ 551 int (*page_flip)(struct drm_crtc *crtc, 552 struct drm_framebuffer *fb, 553 struct drm_pending_vblank_event *event, 554 uint32_t flags, 555 struct drm_modeset_acquire_ctx *ctx); 556 557 /** 558 * @page_flip_target: 559 * 560 * Same as @page_flip but with an additional parameter specifying the 561 * absolute target vertical blank period (as reported by 562 * drm_crtc_vblank_count()) when the flip should take effect. 563 * 564 * Note that the core code calls drm_crtc_vblank_get before this entry 565 * point, and will call drm_crtc_vblank_put if this entry point returns 566 * any non-0 error code. It's the driver's responsibility to call 567 * drm_crtc_vblank_put after this entry point returns 0, typically when 568 * the flip completes. 569 */ 570 int (*page_flip_target)(struct drm_crtc *crtc, 571 struct drm_framebuffer *fb, 572 struct drm_pending_vblank_event *event, 573 uint32_t flags, uint32_t target, 574 struct drm_modeset_acquire_ctx *ctx); 575 576 /** 577 * @set_property: 578 * 579 * This is the legacy entry point to update a property attached to the 580 * CRTC. 581 * 582 * This callback is optional if the driver does not support any legacy 583 * driver-private properties. For atomic drivers it is not used because 584 * property handling is done entirely in the DRM core. 585 * 586 * RETURNS: 587 * 588 * 0 on success or a negative error code on failure. 589 */ 590 int (*set_property)(struct drm_crtc *crtc, 591 struct drm_property *property, uint64_t val); 592 593 /** 594 * @atomic_duplicate_state: 595 * 596 * Duplicate the current atomic state for this CRTC and return it. 597 * The core and helpers guarantee that any atomic state duplicated with 598 * this hook and still owned by the caller (i.e. not transferred to the 599 * driver by calling &drm_mode_config_funcs.atomic_commit) will be 600 * cleaned up by calling the @atomic_destroy_state hook in this 601 * structure. 602 * 603 * This callback is mandatory for atomic drivers. 604 * 605 * Atomic drivers which don't subclass &struct drm_crtc_state should use 606 * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the 607 * state structure to extend it with driver-private state should use 608 * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is 609 * duplicated in a consistent fashion across drivers. 610 * 611 * It is an error to call this hook before &drm_crtc.state has been 612 * initialized correctly. 613 * 614 * NOTE: 615 * 616 * If the duplicate state references refcounted resources this hook must 617 * acquire a reference for each of them. The driver must release these 618 * references again in @atomic_destroy_state. 619 * 620 * RETURNS: 621 * 622 * Duplicated atomic state or NULL when the allocation failed. 623 */ 624 struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc); 625 626 /** 627 * @atomic_destroy_state: 628 * 629 * Destroy a state duplicated with @atomic_duplicate_state and release 630 * or unreference all resources it references 631 * 632 * This callback is mandatory for atomic drivers. 633 */ 634 void (*atomic_destroy_state)(struct drm_crtc *crtc, 635 struct drm_crtc_state *state); 636 637 /** 638 * @atomic_set_property: 639 * 640 * Decode a driver-private property value and store the decoded value 641 * into the passed-in state structure. Since the atomic core decodes all 642 * standardized properties (even for extensions beyond the core set of 643 * properties which might not be implemented by all drivers) this 644 * requires drivers to subclass the state structure. 645 * 646 * Such driver-private properties should really only be implemented for 647 * truly hardware/vendor specific state. Instead it is preferred to 648 * standardize atomic extension and decode the properties used to expose 649 * such an extension in the core. 650 * 651 * Do not call this function directly, use 652 * drm_atomic_crtc_set_property() instead. 653 * 654 * This callback is optional if the driver does not support any 655 * driver-private atomic properties. 656 * 657 * NOTE: 658 * 659 * This function is called in the state assembly phase of atomic 660 * modesets, which can be aborted for any reason (including on 661 * userspace's request to just check whether a configuration would be 662 * possible). Drivers MUST NOT touch any persistent state (hardware or 663 * software) or data structures except the passed in @state parameter. 664 * 665 * Also since userspace controls in which order properties are set this 666 * function must not do any input validation (since the state update is 667 * incomplete and hence likely inconsistent). Instead any such input 668 * validation must be done in the various atomic_check callbacks. 669 * 670 * RETURNS: 671 * 672 * 0 if the property has been found, -EINVAL if the property isn't 673 * implemented by the driver (which should never happen, the core only 674 * asks for properties attached to this CRTC). No other validation is 675 * allowed by the driver. The core already checks that the property 676 * value is within the range (integer, valid enum value, ...) the driver 677 * set when registering the property. 678 */ 679 int (*atomic_set_property)(struct drm_crtc *crtc, 680 struct drm_crtc_state *state, 681 struct drm_property *property, 682 uint64_t val); 683 /** 684 * @atomic_get_property: 685 * 686 * Reads out the decoded driver-private property. This is used to 687 * implement the GETCRTC IOCTL. 688 * 689 * Do not call this function directly, use 690 * drm_atomic_crtc_get_property() instead. 691 * 692 * This callback is optional if the driver does not support any 693 * driver-private atomic properties. 694 * 695 * RETURNS: 696 * 697 * 0 on success, -EINVAL if the property isn't implemented by the 698 * driver (which should never happen, the core only asks for 699 * properties attached to this CRTC). 700 */ 701 int (*atomic_get_property)(struct drm_crtc *crtc, 702 const struct drm_crtc_state *state, 703 struct drm_property *property, 704 uint64_t *val); 705 706 /** 707 * @late_register: 708 * 709 * This optional hook can be used to register additional userspace 710 * interfaces attached to the crtc like debugfs interfaces. 711 * It is called late in the driver load sequence from drm_dev_register(). 712 * Everything added from this callback should be unregistered in 713 * the early_unregister callback. 714 * 715 * Returns: 716 * 717 * 0 on success, or a negative error code on failure. 718 */ 719 int (*late_register)(struct drm_crtc *crtc); 720 721 /** 722 * @early_unregister: 723 * 724 * This optional hook should be used to unregister the additional 725 * userspace interfaces attached to the crtc from 726 * @late_register. It is called from drm_dev_unregister(), 727 * early in the driver unload sequence to disable userspace access 728 * before data structures are torndown. 729 */ 730 void (*early_unregister)(struct drm_crtc *crtc); 731 732 /** 733 * @set_crc_source: 734 * 735 * Changes the source of CRC checksums of frames at the request of 736 * userspace, typically for testing purposes. The sources available are 737 * specific of each driver and a %NULL value indicates that CRC 738 * generation is to be switched off. 739 * 740 * When CRC generation is enabled, the driver should call 741 * drm_crtc_add_crc_entry() at each frame, providing any information 742 * that characterizes the frame contents in the crcN arguments, as 743 * provided from the configured source. Drivers must accept an "auto" 744 * source name that will select a default source for this CRTC. 745 * 746 * Note that "auto" can depend upon the current modeset configuration, 747 * e.g. it could pick an encoder or output specific CRC sampling point. 748 * 749 * This callback is optional if the driver does not support any CRC 750 * generation functionality. 751 * 752 * RETURNS: 753 * 754 * 0 on success or a negative error code on failure. 755 */ 756 int (*set_crc_source)(struct drm_crtc *crtc, const char *source); 757 /** 758 * @verify_crc_source: 759 * 760 * verifies the source of CRC checksums of frames before setting the 761 * source for CRC and during crc open. Source parameter can be NULL 762 * while disabling crc source. 763 * 764 * This callback is optional if the driver does not support any CRC 765 * generation functionality. 766 * 767 * RETURNS: 768 * 769 * 0 on success or a negative error code on failure. 770 */ 771 int (*verify_crc_source)(struct drm_crtc *crtc, const char *source, 772 size_t *values_cnt); 773 /** 774 * @get_crc_sources: 775 * 776 * Driver callback for getting a list of all the available sources for 777 * CRC generation. This callback depends upon verify_crc_source, So 778 * verify_crc_source callback should be implemented before implementing 779 * this. Driver can pass full list of available crc sources, this 780 * callback does the verification on each crc-source before passing it 781 * to userspace. 782 * 783 * This callback is optional if the driver does not support exporting of 784 * possible CRC sources list. 785 * 786 * RETURNS: 787 * 788 * a constant character pointer to the list of all the available CRC 789 * sources. On failure driver should return NULL. count should be 790 * updated with number of sources in list. if zero we don't process any 791 * source from the list. 792 */ 793 const char *const *(*get_crc_sources)(struct drm_crtc *crtc, 794 size_t *count); 795 796 /** 797 * @atomic_print_state: 798 * 799 * If driver subclasses &struct drm_crtc_state, it should implement 800 * this optional hook for printing additional driver specific state. 801 * 802 * Do not call this directly, use drm_atomic_crtc_print_state() 803 * instead. 804 */ 805 void (*atomic_print_state)(struct drm_printer *p, 806 const struct drm_crtc_state *state); 807 808 /** 809 * @get_vblank_counter: 810 * 811 * Driver callback for fetching a raw hardware vblank counter for the 812 * CRTC. It's meant to be used by new drivers as the replacement of 813 * &drm_driver.get_vblank_counter hook. 814 * 815 * This callback is optional. If a device doesn't have a hardware 816 * counter, the driver can simply leave the hook as NULL. The DRM core 817 * will account for missed vblank events while interrupts where disabled 818 * based on system timestamps. 819 * 820 * Wraparound handling and loss of events due to modesetting is dealt 821 * with in the DRM core code, as long as drivers call 822 * drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or 823 * enabling a CRTC. 824 * 825 * See also &drm_device.vblank_disable_immediate and 826 * &drm_device.max_vblank_count. 827 * 828 * Returns: 829 * 830 * Raw vblank counter value. 831 */ 832 u32 (*get_vblank_counter)(struct drm_crtc *crtc); 833 834 /** 835 * @enable_vblank: 836 * 837 * Enable vblank interrupts for the CRTC. It's meant to be used by 838 * new drivers as the replacement of &drm_driver.enable_vblank hook. 839 * 840 * Returns: 841 * 842 * Zero on success, appropriate errno if the vblank interrupt cannot 843 * be enabled. 844 */ 845 int (*enable_vblank)(struct drm_crtc *crtc); 846 847 /** 848 * @disable_vblank: 849 * 850 * Disable vblank interrupts for the CRTC. It's meant to be used by 851 * new drivers as the replacement of &drm_driver.disable_vblank hook. 852 */ 853 void (*disable_vblank)(struct drm_crtc *crtc); 854 }; 855 856 /** 857 * struct drm_crtc - central CRTC control structure 858 * 859 * Each CRTC may have one or more connectors associated with it. This structure 860 * allows the CRTC to be controlled. 861 */ 862 struct drm_crtc { 863 /** @dev: parent DRM device */ 864 struct drm_device *dev; 865 /** @port: OF node used by drm_of_find_possible_crtcs(). */ 866 struct device_node *port; 867 /** 868 * @head: 869 * 870 * List of all CRTCs on @dev, linked from &drm_mode_config.crtc_list. 871 * Invariant over the lifetime of @dev and therefore does not need 872 * locking. 873 */ 874 struct list_head head; 875 876 /** @name: human readable name, can be overwritten by the driver */ 877 char *name; 878 879 /** 880 * @mutex: 881 * 882 * This provides a read lock for the overall CRTC state (mode, dpms 883 * state, ...) and a write lock for everything which can be update 884 * without a full modeset (fb, cursor data, CRTC properties ...). A full 885 * modeset also need to grab &drm_mode_config.connection_mutex. 886 * 887 * For atomic drivers specifically this protects @state. 888 */ 889 struct drm_modeset_lock mutex; 890 891 /** @base: base KMS object for ID tracking etc. */ 892 struct drm_mode_object base; 893 894 /** 895 * @primary: 896 * Primary plane for this CRTC. Note that this is only 897 * relevant for legacy IOCTL, it specifies the plane implicitly used by 898 * the SETCRTC and PAGE_FLIP IOCTLs. It does not have any significance 899 * beyond that. 900 */ 901 struct drm_plane *primary; 902 903 /** 904 * @cursor: 905 * Cursor plane for this CRTC. Note that this is only relevant for 906 * legacy IOCTL, it specifies the plane implicitly used by the SETCURSOR 907 * and SETCURSOR2 IOCTLs. It does not have any significance 908 * beyond that. 909 */ 910 struct drm_plane *cursor; 911 912 /** 913 * @index: Position inside the mode_config.list, can be used as an array 914 * index. It is invariant over the lifetime of the CRTC. 915 */ 916 unsigned index; 917 918 /** 919 * @cursor_x: Current x position of the cursor, used for universal 920 * cursor planes because the SETCURSOR IOCTL only can update the 921 * framebuffer without supplying the coordinates. Drivers should not use 922 * this directly, atomic drivers should look at &drm_plane_state.crtc_x 923 * of the cursor plane instead. 924 */ 925 int cursor_x; 926 /** 927 * @cursor_y: Current y position of the cursor, used for universal 928 * cursor planes because the SETCURSOR IOCTL only can update the 929 * framebuffer without supplying the coordinates. Drivers should not use 930 * this directly, atomic drivers should look at &drm_plane_state.crtc_y 931 * of the cursor plane instead. 932 */ 933 int cursor_y; 934 935 /** 936 * @enabled: 937 * 938 * Is this CRTC enabled? Should only be used by legacy drivers, atomic 939 * drivers should instead consult &drm_crtc_state.enable and 940 * &drm_crtc_state.active. Atomic drivers can update this by calling 941 * drm_atomic_helper_update_legacy_modeset_state(). 942 */ 943 bool enabled; 944 945 /** 946 * @mode: 947 * 948 * Current mode timings. Should only be used by legacy drivers, atomic 949 * drivers should instead consult &drm_crtc_state.mode. Atomic drivers 950 * can update this by calling 951 * drm_atomic_helper_update_legacy_modeset_state(). 952 */ 953 struct drm_display_mode mode; 954 955 /** 956 * @hwmode: 957 * 958 * Programmed mode in hw, after adjustments for encoders, crtc, panel 959 * scaling etc. Should only be used by legacy drivers, for high 960 * precision vblank timestamps in 961 * drm_calc_vbltimestamp_from_scanoutpos(). 962 * 963 * Note that atomic drivers should not use this, but instead use 964 * &drm_crtc_state.adjusted_mode. And for high-precision timestamps 965 * drm_calc_vbltimestamp_from_scanoutpos() used &drm_vblank_crtc.hwmode, 966 * which is filled out by calling drm_calc_timestamping_constants(). 967 */ 968 struct drm_display_mode hwmode; 969 970 /** 971 * @x: 972 * x position on screen. Should only be used by legacy drivers, atomic 973 * drivers should look at &drm_plane_state.crtc_x of the primary plane 974 * instead. Updated by calling 975 * drm_atomic_helper_update_legacy_modeset_state(). 976 */ 977 int x; 978 /** 979 * @y: 980 * y position on screen. Should only be used by legacy drivers, atomic 981 * drivers should look at &drm_plane_state.crtc_y of the primary plane 982 * instead. Updated by calling 983 * drm_atomic_helper_update_legacy_modeset_state(). 984 */ 985 int y; 986 987 /** @funcs: CRTC control functions */ 988 const struct drm_crtc_funcs *funcs; 989 990 /** 991 * @gamma_size: Size of legacy gamma ramp reported to userspace. Set up 992 * by calling drm_mode_crtc_set_gamma_size(). 993 */ 994 uint32_t gamma_size; 995 996 /** 997 * @gamma_store: Gamma ramp values used by the legacy SETGAMMA and 998 * GETGAMMA IOCTls. Set up by calling drm_mode_crtc_set_gamma_size(). 999 */ 1000 uint16_t *gamma_store; 1001 1002 /** @helper_private: mid-layer private data */ 1003 const struct drm_crtc_helper_funcs *helper_private; 1004 1005 /** @properties: property tracking for this CRTC */ 1006 struct drm_object_properties properties; 1007 1008 /** 1009 * @state: 1010 * 1011 * Current atomic state for this CRTC. 1012 * 1013 * This is protected by @mutex. Note that nonblocking atomic commits 1014 * access the current CRTC state without taking locks. Either by going 1015 * through the &struct drm_atomic_state pointers, see 1016 * for_each_oldnew_crtc_in_state(), for_each_old_crtc_in_state() and 1017 * for_each_new_crtc_in_state(). Or through careful ordering of atomic 1018 * commit operations as implemented in the atomic helpers, see 1019 * &struct drm_crtc_commit. 1020 */ 1021 struct drm_crtc_state *state; 1022 1023 /** 1024 * @commit_list: 1025 * 1026 * List of &drm_crtc_commit structures tracking pending commits. 1027 * Protected by @commit_lock. This list holds its own full reference, 1028 * as does the ongoing commit. 1029 * 1030 * "Note that the commit for a state change is also tracked in 1031 * &drm_crtc_state.commit. For accessing the immediately preceding 1032 * commit in an atomic update it is recommended to just use that 1033 * pointer in the old CRTC state, since accessing that doesn't need 1034 * any locking or list-walking. @commit_list should only be used to 1035 * stall for framebuffer cleanup that's signalled through 1036 * &drm_crtc_commit.cleanup_done." 1037 */ 1038 struct list_head commit_list; 1039 1040 /** 1041 * @commit_lock: 1042 * 1043 * Spinlock to protect @commit_list. 1044 */ 1045 spinlock_t commit_lock; 1046 1047 #ifdef CONFIG_DEBUG_FS 1048 /** 1049 * @debugfs_entry: 1050 * 1051 * Debugfs directory for this CRTC. 1052 */ 1053 struct dentry *debugfs_entry; 1054 #endif 1055 1056 /** 1057 * @crc: 1058 * 1059 * Configuration settings of CRC capture. 1060 */ 1061 struct drm_crtc_crc crc; 1062 1063 /** 1064 * @fence_context: 1065 * 1066 * timeline context used for fence operations. 1067 */ 1068 unsigned int fence_context; 1069 1070 /** 1071 * @fence_lock: 1072 * 1073 * spinlock to protect the fences in the fence_context. 1074 */ 1075 spinlock_t fence_lock; 1076 /** 1077 * @fence_seqno: 1078 * 1079 * Seqno variable used as monotonic counter for the fences 1080 * created on the CRTC's timeline. 1081 */ 1082 unsigned long fence_seqno; 1083 1084 /** 1085 * @timeline_name: 1086 * 1087 * The name of the CRTC's fence timeline. 1088 */ 1089 char timeline_name[32]; 1090 }; 1091 1092 /** 1093 * struct drm_mode_set - new values for a CRTC config change 1094 * @fb: framebuffer to use for new config 1095 * @crtc: CRTC whose configuration we're about to change 1096 * @mode: mode timings to use 1097 * @x: position of this CRTC relative to @fb 1098 * @y: position of this CRTC relative to @fb 1099 * @connectors: array of connectors to drive with this CRTC if possible 1100 * @num_connectors: size of @connectors array 1101 * 1102 * This represents a modeset configuration for the legacy SETCRTC ioctl and is 1103 * also used internally. Atomic drivers instead use &drm_atomic_state. 1104 */ 1105 struct drm_mode_set { 1106 struct drm_framebuffer *fb; 1107 struct drm_crtc *crtc; 1108 struct drm_display_mode *mode; 1109 1110 uint32_t x; 1111 uint32_t y; 1112 1113 struct drm_connector **connectors; 1114 size_t num_connectors; 1115 }; 1116 1117 #define obj_to_crtc(x) container_of(x, struct drm_crtc, base) 1118 1119 __printf(6, 7) 1120 int drm_crtc_init_with_planes(struct drm_device *dev, 1121 struct drm_crtc *crtc, 1122 struct drm_plane *primary, 1123 struct drm_plane *cursor, 1124 const struct drm_crtc_funcs *funcs, 1125 const char *name, ...); 1126 void drm_crtc_cleanup(struct drm_crtc *crtc); 1127 1128 /** 1129 * drm_crtc_index - find the index of a registered CRTC 1130 * @crtc: CRTC to find index for 1131 * 1132 * Given a registered CRTC, return the index of that CRTC within a DRM 1133 * device's list of CRTCs. 1134 */ 1135 static inline unsigned int drm_crtc_index(const struct drm_crtc *crtc) 1136 { 1137 return crtc->index; 1138 } 1139 1140 /** 1141 * drm_crtc_mask - find the mask of a registered CRTC 1142 * @crtc: CRTC to find mask for 1143 * 1144 * Given a registered CRTC, return the mask bit of that CRTC for the 1145 * &drm_encoder.possible_crtcs and &drm_plane.possible_crtcs fields. 1146 */ 1147 static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc) 1148 { 1149 return 1 << drm_crtc_index(crtc); 1150 } 1151 1152 int drm_mode_set_config_internal(struct drm_mode_set *set); 1153 struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx); 1154 1155 /** 1156 * drm_crtc_find - look up a CRTC object from its ID 1157 * @dev: DRM device 1158 * @file_priv: drm file to check for lease against. 1159 * @id: &drm_mode_object ID 1160 * 1161 * This can be used to look up a CRTC from its userspace ID. Only used by 1162 * drivers for legacy IOCTLs and interface, nowadays extensions to the KMS 1163 * userspace interface should be done using &drm_property. 1164 */ 1165 static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev, 1166 struct drm_file *file_priv, 1167 uint32_t id) 1168 { 1169 struct drm_mode_object *mo; 1170 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CRTC); 1171 return mo ? obj_to_crtc(mo) : NULL; 1172 } 1173 1174 /** 1175 * drm_for_each_crtc - iterate over all CRTCs 1176 * @crtc: a &struct drm_crtc as the loop cursor 1177 * @dev: the &struct drm_device 1178 * 1179 * Iterate over all CRTCs of @dev. 1180 */ 1181 #define drm_for_each_crtc(crtc, dev) \ 1182 list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head) 1183 1184 #endif /* __DRM_CRTC_H__ */ 1185