1 /* 2 * Copyright (c) 2016 Intel Corporation 3 * 4 * Permission to use, copy, modify, distribute, and sell this software and its 5 * documentation for any purpose is hereby granted without fee, provided that 6 * the above copyright notice appear in all copies and that both that copyright 7 * notice and this permission notice appear in supporting documentation, and 8 * that the name of the copyright holders not be used in advertising or 9 * publicity pertaining to distribution of the software without specific, 10 * written prior permission. The copyright holders make no representations 11 * about the suitability of this software for any purpose. It is provided "as 12 * is" without express or implied warranty. 13 * 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 20 * OF THIS SOFTWARE. 21 */ 22 23 #ifndef __DRM_CONNECTOR_H__ 24 #define __DRM_CONNECTOR_H__ 25 26 #include <linux/list.h> 27 #include <linux/llist.h> 28 #include <linux/ctype.h> 29 #include <linux/hdmi.h> 30 #include <drm/drm_mode_object.h> 31 32 #include <uapi/drm/drm_mode.h> 33 34 struct drm_connector_helper_funcs; 35 struct drm_modeset_acquire_ctx; 36 struct drm_device; 37 struct drm_crtc; 38 struct drm_encoder; 39 struct drm_property; 40 struct drm_property_blob; 41 struct drm_printer; 42 struct edid; 43 44 enum drm_connector_force { 45 DRM_FORCE_UNSPECIFIED, 46 DRM_FORCE_OFF, 47 DRM_FORCE_ON, /* force on analog part normally */ 48 DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ 49 }; 50 51 /** 52 * enum drm_connector_status - status for a &drm_connector 53 * 54 * This enum is used to track the connector status. There are no separate 55 * #defines for the uapi! 56 */ 57 enum drm_connector_status { 58 /** 59 * @connector_status_connected: The connector is definitely connected to 60 * a sink device, and can be enabled. 61 */ 62 connector_status_connected = 1, 63 /** 64 * @connector_status_disconnected: The connector isn't connected to a 65 * sink device which can be autodetect. For digital outputs like DP or 66 * HDMI (which can be realiable probed) this means there's really 67 * nothing there. It is driver-dependent whether a connector with this 68 * status can be lit up or not. 69 */ 70 connector_status_disconnected = 2, 71 /** 72 * @connector_status_unknown: The connector's status could not be 73 * reliably detected. This happens when probing would either cause 74 * flicker (like load-detection when the connector is in use), or when a 75 * hardware resource isn't available (like when load-detection needs a 76 * free CRTC). It should be possible to light up the connector with one 77 * of the listed fallback modes. For default configuration userspace 78 * should only try to light up connectors with unknown status when 79 * there's not connector with @connector_status_connected. 80 */ 81 connector_status_unknown = 3, 82 }; 83 84 enum subpixel_order { 85 SubPixelUnknown = 0, 86 SubPixelHorizontalRGB, 87 SubPixelHorizontalBGR, 88 SubPixelVerticalRGB, 89 SubPixelVerticalBGR, 90 SubPixelNone, 91 92 }; 93 94 /** 95 * struct drm_scrambling: sink's scrambling support. 96 */ 97 struct drm_scrambling { 98 /** 99 * @supported: scrambling supported for rates > 340 Mhz. 100 */ 101 bool supported; 102 /** 103 * @low_rates: scrambling supported for rates <= 340 Mhz. 104 */ 105 bool low_rates; 106 }; 107 108 /* 109 * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink 110 * 111 * Provides SCDC register support and capabilities related information on a 112 * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0. 113 */ 114 struct drm_scdc { 115 /** 116 * @supported: status control & data channel present. 117 */ 118 bool supported; 119 /** 120 * @read_request: sink is capable of generating scdc read request. 121 */ 122 bool read_request; 123 /** 124 * @scrambling: sink's scrambling capabilities 125 */ 126 struct drm_scrambling scrambling; 127 }; 128 129 130 /** 131 * struct drm_hdmi_info - runtime information about the connected HDMI sink 132 * 133 * Describes if a given display supports advanced HDMI 2.0 features. 134 * This information is available in CEA-861-F extension blocks (like HF-VSDB). 135 */ 136 struct drm_hdmi_info { 137 /** @scdc: sink's scdc support and capabilities */ 138 struct drm_scdc scdc; 139 140 /** 141 * @y420_vdb_modes: bitmap of modes which can support ycbcr420 142 * output only (not normal RGB/YCBCR444/422 outputs). There are total 143 * 107 VICs defined by CEA-861-F spec, so the size is 128 bits to map 144 * upto 128 VICs; 145 */ 146 unsigned long y420_vdb_modes[BITS_TO_LONGS(128)]; 147 148 /** 149 * @y420_cmdb_modes: bitmap of modes which can support ycbcr420 150 * output also, along with normal HDMI outputs. There are total 107 151 * VICs defined by CEA-861-F spec, so the size is 128 bits to map upto 152 * 128 VICs; 153 */ 154 unsigned long y420_cmdb_modes[BITS_TO_LONGS(128)]; 155 156 /** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */ 157 u64 y420_cmdb_map; 158 159 /** @y420_dc_modes: bitmap of deep color support index */ 160 u8 y420_dc_modes; 161 }; 162 163 /** 164 * enum drm_link_status - connector's link_status property value 165 * 166 * This enum is used as the connector's link status property value. 167 * It is set to the values defined in uapi. 168 * 169 * @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful 170 * link training 171 * @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training 172 * failure 173 */ 174 enum drm_link_status { 175 DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD, 176 DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD, 177 }; 178 179 /** 180 * enum drm_panel_orientation - panel_orientation info for &drm_display_info 181 * 182 * This enum is used to track the (LCD) panel orientation. There are no 183 * separate #defines for the uapi! 184 * 185 * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any 186 * panel orientation information (normal 187 * for non panels) in this case the "panel 188 * orientation" connector prop will not be 189 * attached. 190 * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the 191 * top side of the device's casing. 192 * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the 193 * bottom side of the device's casing, iow 194 * the panel is mounted upside-down. 195 * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the 196 * top side of the device's casing. 197 * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the 198 * top side of the device's casing. 199 */ 200 enum drm_panel_orientation { 201 DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1, 202 DRM_MODE_PANEL_ORIENTATION_NORMAL = 0, 203 DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, 204 DRM_MODE_PANEL_ORIENTATION_LEFT_UP, 205 DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, 206 }; 207 208 /** 209 * struct drm_display_info - runtime data about the connected sink 210 * 211 * Describes a given display (e.g. CRT or flat panel) and its limitations. For 212 * fixed display sinks like built-in panels there's not much difference between 213 * this and &struct drm_connector. But for sinks with a real cable this 214 * structure is meant to describe all the things at the other end of the cable. 215 * 216 * For sinks which provide an EDID this can be filled out by calling 217 * drm_add_edid_modes(). 218 */ 219 struct drm_display_info { 220 /** 221 * @name: Name of the display. 222 */ 223 char name[DRM_DISPLAY_INFO_LEN]; 224 225 /** 226 * @width_mm: Physical width in mm. 227 */ 228 unsigned int width_mm; 229 /** 230 * @height_mm: Physical height in mm. 231 */ 232 unsigned int height_mm; 233 234 /** 235 * @pixel_clock: Maximum pixel clock supported by the sink, in units of 236 * 100Hz. This mismatches the clock in &drm_display_mode (which is in 237 * kHZ), because that's what the EDID uses as base unit. 238 */ 239 unsigned int pixel_clock; 240 /** 241 * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs. 242 */ 243 unsigned int bpc; 244 245 /** 246 * @subpixel_order: Subpixel order of LCD panels. 247 */ 248 enum subpixel_order subpixel_order; 249 250 #define DRM_COLOR_FORMAT_RGB444 (1<<0) 251 #define DRM_COLOR_FORMAT_YCRCB444 (1<<1) 252 #define DRM_COLOR_FORMAT_YCRCB422 (1<<2) 253 #define DRM_COLOR_FORMAT_YCRCB420 (1<<3) 254 255 /** 256 * @panel_orientation: Read only connector property for built-in panels, 257 * indicating the orientation of the panel vs the device's casing. 258 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. 259 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the 260 * fb to compensate and gets exported as prop to userspace. 261 */ 262 int panel_orientation; 263 264 /** 265 * @color_formats: HDMI Color formats, selects between RGB and YCrCb 266 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones 267 * as used to describe the pixel format in framebuffers, and also don't 268 * match the formats in @bus_formats which are shared with v4l. 269 */ 270 u32 color_formats; 271 272 /** 273 * @bus_formats: Pixel data format on the wire, somewhat redundant with 274 * @color_formats. Array of size @num_bus_formats encoded using 275 * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers. 276 */ 277 const u32 *bus_formats; 278 /** 279 * @num_bus_formats: Size of @bus_formats array. 280 */ 281 unsigned int num_bus_formats; 282 283 #define DRM_BUS_FLAG_DE_LOW (1<<0) 284 #define DRM_BUS_FLAG_DE_HIGH (1<<1) 285 /* drive data on pos. edge */ 286 #define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2) 287 /* drive data on neg. edge */ 288 #define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3) 289 /* data is transmitted MSB to LSB on the bus */ 290 #define DRM_BUS_FLAG_DATA_MSB_TO_LSB (1<<4) 291 /* data is transmitted LSB to MSB on the bus */ 292 #define DRM_BUS_FLAG_DATA_LSB_TO_MSB (1<<5) 293 294 /** 295 * @bus_flags: Additional information (like pixel signal polarity) for 296 * the pixel data on the bus, using DRM_BUS_FLAGS\_ defines. 297 */ 298 u32 bus_flags; 299 300 /** 301 * @max_tmds_clock: Maximum TMDS clock rate supported by the 302 * sink in kHz. 0 means undefined. 303 */ 304 int max_tmds_clock; 305 306 /** 307 * @dvi_dual: Dual-link DVI sink? 308 */ 309 bool dvi_dual; 310 311 /** 312 * @has_hdmi_infoframe: Does the sink support the HDMI infoframe? 313 */ 314 bool has_hdmi_infoframe; 315 316 /** 317 * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even 318 * more stuff redundant with @bus_formats. 319 */ 320 u8 edid_hdmi_dc_modes; 321 322 /** 323 * @cea_rev: CEA revision of the HDMI sink. 324 */ 325 u8 cea_rev; 326 327 /** 328 * @hdmi: advance features of a HDMI sink. 329 */ 330 struct drm_hdmi_info hdmi; 331 332 /** 333 * @non_desktop: Non desktop display (HMD). 334 */ 335 bool non_desktop; 336 }; 337 338 int drm_display_info_set_bus_formats(struct drm_display_info *info, 339 const u32 *formats, 340 unsigned int num_formats); 341 342 /** 343 * struct drm_tv_connector_state - TV connector related states 344 * @subconnector: selected subconnector 345 * @margins: margins 346 * @margins.left: left margin 347 * @margins.right: right margin 348 * @margins.top: top margin 349 * @margins.bottom: bottom margin 350 * @mode: TV mode 351 * @brightness: brightness in percent 352 * @contrast: contrast in percent 353 * @flicker_reduction: flicker reduction in percent 354 * @overscan: overscan in percent 355 * @saturation: saturation in percent 356 * @hue: hue in percent 357 */ 358 struct drm_tv_connector_state { 359 enum drm_mode_subconnector subconnector; 360 struct { 361 unsigned int left; 362 unsigned int right; 363 unsigned int top; 364 unsigned int bottom; 365 } margins; 366 unsigned int mode; 367 unsigned int brightness; 368 unsigned int contrast; 369 unsigned int flicker_reduction; 370 unsigned int overscan; 371 unsigned int saturation; 372 unsigned int hue; 373 }; 374 375 /** 376 * struct drm_connector_state - mutable connector state 377 * @connector: backpointer to the connector 378 * @best_encoder: can be used by helpers and drivers to select the encoder 379 * @state: backpointer to global drm_atomic_state 380 * @tv: TV connector state 381 */ 382 struct drm_connector_state { 383 struct drm_connector *connector; 384 385 /** 386 * @crtc: CRTC to connect connector to, NULL if disabled. 387 * 388 * Do not change this directly, use drm_atomic_set_crtc_for_connector() 389 * instead. 390 */ 391 struct drm_crtc *crtc; 392 393 struct drm_encoder *best_encoder; 394 395 /** 396 * @link_status: Connector link_status to keep track of whether link is 397 * GOOD or BAD to notify userspace if retraining is necessary. 398 */ 399 enum drm_link_status link_status; 400 401 struct drm_atomic_state *state; 402 403 /** 404 * @commit: Tracks the pending commit to prevent use-after-free conditions. 405 * 406 * Is only set when @crtc is NULL. 407 */ 408 struct drm_crtc_commit *commit; 409 410 struct drm_tv_connector_state tv; 411 412 /** 413 * @picture_aspect_ratio: Connector property to control the 414 * HDMI infoframe aspect ratio setting. 415 * 416 * The %DRM_MODE_PICTURE_ASPECT_\* values much match the 417 * values for &enum hdmi_picture_aspect 418 */ 419 enum hdmi_picture_aspect picture_aspect_ratio; 420 421 /** 422 * @scaling_mode: Connector property to control the 423 * upscaling, mostly used for built-in panels. 424 */ 425 unsigned int scaling_mode; 426 427 /** 428 * @content_protection: Connector property to request content 429 * protection. This is most commonly used for HDCP. 430 */ 431 unsigned int content_protection; 432 }; 433 434 /** 435 * struct drm_connector_funcs - control connectors on a given device 436 * 437 * Each CRTC may have one or more connectors attached to it. The functions 438 * below allow the core DRM code to control connectors, enumerate available modes, 439 * etc. 440 */ 441 struct drm_connector_funcs { 442 /** 443 * @dpms: 444 * 445 * Legacy entry point to set the per-connector DPMS state. Legacy DPMS 446 * is exposed as a standard property on the connector, but diverted to 447 * this callback in the drm core. Note that atomic drivers don't 448 * implement the 4 level DPMS support on the connector any more, but 449 * instead only have an on/off "ACTIVE" property on the CRTC object. 450 * 451 * This hook is not used by atomic drivers, remapping of the legacy DPMS 452 * property is entirely handled in the DRM core. 453 * 454 * RETURNS: 455 * 456 * 0 on success or a negative error code on failure. 457 */ 458 int (*dpms)(struct drm_connector *connector, int mode); 459 460 /** 461 * @reset: 462 * 463 * Reset connector hardware and software state to off. This function isn't 464 * called by the core directly, only through drm_mode_config_reset(). 465 * It's not a helper hook only for historical reasons. 466 * 467 * Atomic drivers can use drm_atomic_helper_connector_reset() to reset 468 * atomic state using this hook. 469 */ 470 void (*reset)(struct drm_connector *connector); 471 472 /** 473 * @detect: 474 * 475 * Check to see if anything is attached to the connector. The parameter 476 * force is set to false whilst polling, true when checking the 477 * connector due to a user request. force can be used by the driver to 478 * avoid expensive, destructive operations during automated probing. 479 * 480 * This callback is optional, if not implemented the connector will be 481 * considered as always being attached. 482 * 483 * FIXME: 484 * 485 * Note that this hook is only called by the probe helper. It's not in 486 * the helper library vtable purely for historical reasons. The only DRM 487 * core entry point to probe connector state is @fill_modes. 488 * 489 * Note that the helper library will already hold 490 * &drm_mode_config.connection_mutex. Drivers which need to grab additional 491 * locks to avoid races with concurrent modeset changes need to use 492 * &drm_connector_helper_funcs.detect_ctx instead. 493 * 494 * RETURNS: 495 * 496 * drm_connector_status indicating the connector's status. 497 */ 498 enum drm_connector_status (*detect)(struct drm_connector *connector, 499 bool force); 500 501 /** 502 * @force: 503 * 504 * This function is called to update internal encoder state when the 505 * connector is forced to a certain state by userspace, either through 506 * the sysfs interfaces or on the kernel cmdline. In that case the 507 * @detect callback isn't called. 508 * 509 * FIXME: 510 * 511 * Note that this hook is only called by the probe helper. It's not in 512 * the helper library vtable purely for historical reasons. The only DRM 513 * core entry point to probe connector state is @fill_modes. 514 */ 515 void (*force)(struct drm_connector *connector); 516 517 /** 518 * @fill_modes: 519 * 520 * Entry point for output detection and basic mode validation. The 521 * driver should reprobe the output if needed (e.g. when hotplug 522 * handling is unreliable), add all detected modes to &drm_connector.modes 523 * and filter out any the device can't support in any configuration. It 524 * also needs to filter out any modes wider or higher than the 525 * parameters max_width and max_height indicate. 526 * 527 * The drivers must also prune any modes no longer valid from 528 * &drm_connector.modes. Furthermore it must update 529 * &drm_connector.status and &drm_connector.edid. If no EDID has been 530 * received for this output connector->edid must be NULL. 531 * 532 * Drivers using the probe helpers should use 533 * drm_helper_probe_single_connector_modes() or 534 * drm_helper_probe_single_connector_modes_nomerge() to implement this 535 * function. 536 * 537 * RETURNS: 538 * 539 * The number of modes detected and filled into &drm_connector.modes. 540 */ 541 int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); 542 543 /** 544 * @set_property: 545 * 546 * This is the legacy entry point to update a property attached to the 547 * connector. 548 * 549 * This callback is optional if the driver does not support any legacy 550 * driver-private properties. For atomic drivers it is not used because 551 * property handling is done entirely in the DRM core. 552 * 553 * RETURNS: 554 * 555 * 0 on success or a negative error code on failure. 556 */ 557 int (*set_property)(struct drm_connector *connector, struct drm_property *property, 558 uint64_t val); 559 560 /** 561 * @late_register: 562 * 563 * This optional hook can be used to register additional userspace 564 * interfaces attached to the connector, light backlight control, i2c, 565 * DP aux or similar interfaces. It is called late in the driver load 566 * sequence from drm_connector_register() when registering all the 567 * core drm connector interfaces. Everything added from this callback 568 * should be unregistered in the early_unregister callback. 569 * 570 * This is called while holding &drm_connector.mutex. 571 * 572 * Returns: 573 * 574 * 0 on success, or a negative error code on failure. 575 */ 576 int (*late_register)(struct drm_connector *connector); 577 578 /** 579 * @early_unregister: 580 * 581 * This optional hook should be used to unregister the additional 582 * userspace interfaces attached to the connector from 583 * late_register(). It is called from drm_connector_unregister(), 584 * early in the driver unload sequence to disable userspace access 585 * before data structures are torndown. 586 * 587 * This is called while holding &drm_connector.mutex. 588 */ 589 void (*early_unregister)(struct drm_connector *connector); 590 591 /** 592 * @destroy: 593 * 594 * Clean up connector resources. This is called at driver unload time 595 * through drm_mode_config_cleanup(). It can also be called at runtime 596 * when a connector is being hot-unplugged for drivers that support 597 * connector hotplugging (e.g. DisplayPort MST). 598 */ 599 void (*destroy)(struct drm_connector *connector); 600 601 /** 602 * @atomic_duplicate_state: 603 * 604 * Duplicate the current atomic state for this connector and return it. 605 * The core and helpers guarantee that any atomic state duplicated with 606 * this hook and still owned by the caller (i.e. not transferred to the 607 * driver by calling &drm_mode_config_funcs.atomic_commit) will be 608 * cleaned up by calling the @atomic_destroy_state hook in this 609 * structure. 610 * 611 * Atomic drivers which don't subclass &struct drm_connector_state should use 612 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the 613 * state structure to extend it with driver-private state should use 614 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is 615 * duplicated in a consistent fashion across drivers. 616 * 617 * It is an error to call this hook before &drm_connector.state has been 618 * initialized correctly. 619 * 620 * NOTE: 621 * 622 * If the duplicate state references refcounted resources this hook must 623 * acquire a reference for each of them. The driver must release these 624 * references again in @atomic_destroy_state. 625 * 626 * RETURNS: 627 * 628 * Duplicated atomic state or NULL when the allocation failed. 629 */ 630 struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); 631 632 /** 633 * @atomic_destroy_state: 634 * 635 * Destroy a state duplicated with @atomic_duplicate_state and release 636 * or unreference all resources it references 637 */ 638 void (*atomic_destroy_state)(struct drm_connector *connector, 639 struct drm_connector_state *state); 640 641 /** 642 * @atomic_set_property: 643 * 644 * Decode a driver-private property value and store the decoded value 645 * into the passed-in state structure. Since the atomic core decodes all 646 * standardized properties (even for extensions beyond the core set of 647 * properties which might not be implemented by all drivers) this 648 * requires drivers to subclass the state structure. 649 * 650 * Such driver-private properties should really only be implemented for 651 * truly hardware/vendor specific state. Instead it is preferred to 652 * standardize atomic extension and decode the properties used to expose 653 * such an extension in the core. 654 * 655 * Do not call this function directly, use 656 * drm_atomic_connector_set_property() instead. 657 * 658 * This callback is optional if the driver does not support any 659 * driver-private atomic properties. 660 * 661 * NOTE: 662 * 663 * This function is called in the state assembly phase of atomic 664 * modesets, which can be aborted for any reason (including on 665 * userspace's request to just check whether a configuration would be 666 * possible). Drivers MUST NOT touch any persistent state (hardware or 667 * software) or data structures except the passed in @state parameter. 668 * 669 * Also since userspace controls in which order properties are set this 670 * function must not do any input validation (since the state update is 671 * incomplete and hence likely inconsistent). Instead any such input 672 * validation must be done in the various atomic_check callbacks. 673 * 674 * RETURNS: 675 * 676 * 0 if the property has been found, -EINVAL if the property isn't 677 * implemented by the driver (which shouldn't ever happen, the core only 678 * asks for properties attached to this connector). No other validation 679 * is allowed by the driver. The core already checks that the property 680 * value is within the range (integer, valid enum value, ...) the driver 681 * set when registering the property. 682 */ 683 int (*atomic_set_property)(struct drm_connector *connector, 684 struct drm_connector_state *state, 685 struct drm_property *property, 686 uint64_t val); 687 688 /** 689 * @atomic_get_property: 690 * 691 * Reads out the decoded driver-private property. This is used to 692 * implement the GETCONNECTOR IOCTL. 693 * 694 * Do not call this function directly, use 695 * drm_atomic_connector_get_property() instead. 696 * 697 * This callback is optional if the driver does not support any 698 * driver-private atomic properties. 699 * 700 * RETURNS: 701 * 702 * 0 on success, -EINVAL if the property isn't implemented by the 703 * driver (which shouldn't ever happen, the core only asks for 704 * properties attached to this connector). 705 */ 706 int (*atomic_get_property)(struct drm_connector *connector, 707 const struct drm_connector_state *state, 708 struct drm_property *property, 709 uint64_t *val); 710 711 /** 712 * @atomic_print_state: 713 * 714 * If driver subclasses &struct drm_connector_state, it should implement 715 * this optional hook for printing additional driver specific state. 716 * 717 * Do not call this directly, use drm_atomic_connector_print_state() 718 * instead. 719 */ 720 void (*atomic_print_state)(struct drm_printer *p, 721 const struct drm_connector_state *state); 722 }; 723 724 /* mode specified on the command line */ 725 struct drm_cmdline_mode { 726 bool specified; 727 bool refresh_specified; 728 bool bpp_specified; 729 int xres, yres; 730 int bpp; 731 int refresh; 732 bool rb; 733 bool interlace; 734 bool cvt; 735 bool margins; 736 enum drm_connector_force force; 737 }; 738 739 /** 740 * struct drm_connector - central DRM connector control structure 741 * @dev: parent DRM device 742 * @kdev: kernel device for sysfs attributes 743 * @attr: sysfs attributes 744 * @head: list management 745 * @base: base KMS object 746 * @name: human readable name, can be overwritten by the driver 747 * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h 748 * @connector_type_id: index into connector type enum 749 * @interlace_allowed: can this connector handle interlaced modes? 750 * @doublescan_allowed: can this connector handle doublescan? 751 * @stereo_allowed: can this connector handle stereo modes? 752 * @funcs: connector control functions 753 * @edid_blob_ptr: DRM property containing EDID if present 754 * @properties: property tracking for this connector 755 * @dpms: current dpms state 756 * @helper_private: mid-layer private data 757 * @cmdline_mode: mode line parsed from the kernel cmdline for this connector 758 * @force: a DRM_FORCE_<foo> state for forced mode sets 759 * @override_edid: has the EDID been overwritten through debugfs for testing? 760 * @encoder_ids: valid encoders for this connector 761 * @eld: EDID-like data, if present 762 * @latency_present: AV delay info from ELD, if found 763 * @video_latency: video latency info from ELD, if found 764 * @audio_latency: audio latency info from ELD, if found 765 * @null_edid_counter: track sinks that give us all zeros for the EDID 766 * @bad_edid_counter: track sinks that give us an EDID with invalid checksum 767 * @edid_corrupt: indicates whether the last read EDID was corrupt 768 * @debugfs_entry: debugfs directory for this connector 769 * @has_tile: is this connector connected to a tiled monitor 770 * @tile_group: tile group for the connected monitor 771 * @tile_is_single_monitor: whether the tile is one monitor housing 772 * @num_h_tile: number of horizontal tiles in the tile group 773 * @num_v_tile: number of vertical tiles in the tile group 774 * @tile_h_loc: horizontal location of this tile 775 * @tile_v_loc: vertical location of this tile 776 * @tile_h_size: horizontal size of this tile. 777 * @tile_v_size: vertical size of this tile. 778 * @scaling_mode_property: Optional atomic property to control the upscaling. 779 * @content_protection_property: Optional property to control content protection 780 * 781 * Each connector may be connected to one or more CRTCs, or may be clonable by 782 * another connector if they can share a CRTC. Each connector also has a specific 783 * position in the broader display (referred to as a 'screen' though it could 784 * span multiple monitors). 785 */ 786 struct drm_connector { 787 struct drm_device *dev; 788 struct device *kdev; 789 struct device_attribute *attr; 790 struct list_head head; 791 792 struct drm_mode_object base; 793 794 char *name; 795 796 /** 797 * @mutex: Lock for general connector state, but currently only protects 798 * @registered. Most of the connector state is still protected by 799 * &drm_mode_config.mutex. 800 */ 801 struct mutex mutex; 802 803 /** 804 * @index: Compacted connector index, which matches the position inside 805 * the mode_config.list for drivers not supporting hot-add/removing. Can 806 * be used as an array index. It is invariant over the lifetime of the 807 * connector. 808 */ 809 unsigned index; 810 811 int connector_type; 812 int connector_type_id; 813 bool interlace_allowed; 814 bool doublescan_allowed; 815 bool stereo_allowed; 816 817 /** 818 * @ycbcr_420_allowed : This bool indicates if this connector is 819 * capable of handling YCBCR 420 output. While parsing the EDID 820 * blocks, its very helpful to know, if the source is capable of 821 * handling YCBCR 420 outputs. 822 */ 823 bool ycbcr_420_allowed; 824 825 /** 826 * @registered: Is this connector exposed (registered) with userspace? 827 * Protected by @mutex. 828 */ 829 bool registered; 830 831 /** 832 * @modes: 833 * Modes available on this connector (from fill_modes() + user). 834 * Protected by &drm_mode_config.mutex. 835 */ 836 struct list_head modes; 837 838 /** 839 * @status: 840 * One of the drm_connector_status enums (connected, not, or unknown). 841 * Protected by &drm_mode_config.mutex. 842 */ 843 enum drm_connector_status status; 844 845 /** 846 * @probed_modes: 847 * These are modes added by probing with DDC or the BIOS, before 848 * filtering is applied. Used by the probe helpers. Protected by 849 * &drm_mode_config.mutex. 850 */ 851 struct list_head probed_modes; 852 853 /** 854 * @display_info: Display information is filled from EDID information 855 * when a display is detected. For non hot-pluggable displays such as 856 * flat panels in embedded systems, the driver should initialize the 857 * &drm_display_info.width_mm and &drm_display_info.height_mm fields 858 * with the physical size of the display. 859 * 860 * Protected by &drm_mode_config.mutex. 861 */ 862 struct drm_display_info display_info; 863 const struct drm_connector_funcs *funcs; 864 865 struct drm_property_blob *edid_blob_ptr; 866 struct drm_object_properties properties; 867 868 struct drm_property *scaling_mode_property; 869 870 /** 871 * @content_protection_property: DRM ENUM property for content 872 * protection 873 */ 874 struct drm_property *content_protection_property; 875 876 /** 877 * @path_blob_ptr: 878 * 879 * DRM blob property data for the DP MST path property. 880 */ 881 struct drm_property_blob *path_blob_ptr; 882 883 /** 884 * @tile_blob_ptr: 885 * 886 * DRM blob property data for the tile property (used mostly by DP MST). 887 * This is meant for screens which are driven through separate display 888 * pipelines represented by &drm_crtc, which might not be running with 889 * genlocked clocks. For tiled panels which are genlocked, like 890 * dual-link LVDS or dual-link DSI, the driver should try to not expose 891 * the tiling and virtualize both &drm_crtc and &drm_plane if needed. 892 */ 893 struct drm_property_blob *tile_blob_ptr; 894 895 /* should we poll this connector for connects and disconnects */ 896 /* hot plug detectable */ 897 #define DRM_CONNECTOR_POLL_HPD (1 << 0) 898 /* poll for connections */ 899 #define DRM_CONNECTOR_POLL_CONNECT (1 << 1) 900 /* can cleanly poll for disconnections without flickering the screen */ 901 /* DACs should rarely do this without a lot of testing */ 902 #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) 903 904 /** 905 * @polled: 906 * 907 * Connector polling mode, a combination of 908 * 909 * DRM_CONNECTOR_POLL_HPD 910 * The connector generates hotplug events and doesn't need to be 911 * periodically polled. The CONNECT and DISCONNECT flags must not 912 * be set together with the HPD flag. 913 * 914 * DRM_CONNECTOR_POLL_CONNECT 915 * Periodically poll the connector for connection. 916 * 917 * DRM_CONNECTOR_POLL_DISCONNECT 918 * Periodically poll the connector for disconnection. 919 * 920 * Set to 0 for connectors that don't support connection status 921 * discovery. 922 */ 923 uint8_t polled; 924 925 /* requested DPMS state */ 926 int dpms; 927 928 const struct drm_connector_helper_funcs *helper_private; 929 930 /* forced on connector */ 931 struct drm_cmdline_mode cmdline_mode; 932 enum drm_connector_force force; 933 bool override_edid; 934 935 #define DRM_CONNECTOR_MAX_ENCODER 3 936 uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; 937 /** 938 * @encoder: Currently bound encoder driving this connector, if any. 939 * Only really meaningful for non-atomic drivers. Atomic drivers should 940 * instead look at &drm_connector_state.best_encoder, and in case they 941 * need the CRTC driving this output, &drm_connector_state.crtc. 942 */ 943 struct drm_encoder *encoder; 944 945 #define MAX_ELD_BYTES 128 946 /* EDID bits */ 947 uint8_t eld[MAX_ELD_BYTES]; 948 bool latency_present[2]; 949 int video_latency[2]; /* [0]: progressive, [1]: interlaced */ 950 int audio_latency[2]; 951 int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */ 952 unsigned bad_edid_counter; 953 954 /* Flag for raw EDID header corruption - used in Displayport 955 * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6 956 */ 957 bool edid_corrupt; 958 959 struct dentry *debugfs_entry; 960 961 /** 962 * @state: 963 * 964 * Current atomic state for this connector. 965 * 966 * This is protected by @drm_mode_config.connection_mutex. Note that 967 * nonblocking atomic commits access the current connector state without 968 * taking locks. Either by going through the &struct drm_atomic_state 969 * pointers, see for_each_oldnew_connector_in_state(), 970 * for_each_old_connector_in_state() and 971 * for_each_new_connector_in_state(). Or through careful ordering of 972 * atomic commit operations as implemented in the atomic helpers, see 973 * &struct drm_crtc_commit. 974 */ 975 struct drm_connector_state *state; 976 977 /* DisplayID bits */ 978 bool has_tile; 979 struct drm_tile_group *tile_group; 980 bool tile_is_single_monitor; 981 982 uint8_t num_h_tile, num_v_tile; 983 uint8_t tile_h_loc, tile_v_loc; 984 uint16_t tile_h_size, tile_v_size; 985 986 /** 987 * @free_node: 988 * 989 * List used only by &drm_connector_iter to be able to clean up a 990 * connector from any context, in conjunction with 991 * &drm_mode_config.connector_free_work. 992 */ 993 struct llist_node free_node; 994 }; 995 996 #define obj_to_connector(x) container_of(x, struct drm_connector, base) 997 998 int drm_connector_init(struct drm_device *dev, 999 struct drm_connector *connector, 1000 const struct drm_connector_funcs *funcs, 1001 int connector_type); 1002 int drm_connector_register(struct drm_connector *connector); 1003 void drm_connector_unregister(struct drm_connector *connector); 1004 int drm_mode_connector_attach_encoder(struct drm_connector *connector, 1005 struct drm_encoder *encoder); 1006 1007 void drm_connector_cleanup(struct drm_connector *connector); 1008 static inline unsigned drm_connector_index(struct drm_connector *connector) 1009 { 1010 return connector->index; 1011 } 1012 1013 /** 1014 * drm_connector_lookup - lookup connector object 1015 * @dev: DRM device 1016 * @file_priv: drm file to check for lease against. 1017 * @id: connector object id 1018 * 1019 * This function looks up the connector object specified by id 1020 * add takes a reference to it. 1021 */ 1022 static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev, 1023 struct drm_file *file_priv, 1024 uint32_t id) 1025 { 1026 struct drm_mode_object *mo; 1027 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CONNECTOR); 1028 return mo ? obj_to_connector(mo) : NULL; 1029 } 1030 1031 /** 1032 * drm_connector_get - acquire a connector reference 1033 * @connector: DRM connector 1034 * 1035 * This function increments the connector's refcount. 1036 */ 1037 static inline void drm_connector_get(struct drm_connector *connector) 1038 { 1039 drm_mode_object_get(&connector->base); 1040 } 1041 1042 /** 1043 * drm_connector_put - release a connector reference 1044 * @connector: DRM connector 1045 * 1046 * This function decrements the connector's reference count and frees the 1047 * object if the reference count drops to zero. 1048 */ 1049 static inline void drm_connector_put(struct drm_connector *connector) 1050 { 1051 drm_mode_object_put(&connector->base); 1052 } 1053 1054 /** 1055 * drm_connector_reference - acquire a connector reference 1056 * @connector: DRM connector 1057 * 1058 * This is a compatibility alias for drm_connector_get() and should not be 1059 * used by new code. 1060 */ 1061 static inline void drm_connector_reference(struct drm_connector *connector) 1062 { 1063 drm_connector_get(connector); 1064 } 1065 1066 /** 1067 * drm_connector_unreference - release a connector reference 1068 * @connector: DRM connector 1069 * 1070 * This is a compatibility alias for drm_connector_put() and should not be 1071 * used by new code. 1072 */ 1073 static inline void drm_connector_unreference(struct drm_connector *connector) 1074 { 1075 drm_connector_put(connector); 1076 } 1077 1078 const char *drm_get_connector_status_name(enum drm_connector_status status); 1079 const char *drm_get_subpixel_order_name(enum subpixel_order order); 1080 const char *drm_get_dpms_name(int val); 1081 const char *drm_get_dvi_i_subconnector_name(int val); 1082 const char *drm_get_dvi_i_select_name(int val); 1083 const char *drm_get_tv_subconnector_name(int val); 1084 const char *drm_get_tv_select_name(int val); 1085 const char *drm_get_content_protection_name(int val); 1086 1087 int drm_mode_create_dvi_i_properties(struct drm_device *dev); 1088 int drm_mode_create_tv_properties(struct drm_device *dev, 1089 unsigned int num_modes, 1090 const char * const modes[]); 1091 int drm_mode_create_scaling_mode_property(struct drm_device *dev); 1092 int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, 1093 u32 scaling_mode_mask); 1094 int drm_connector_attach_content_protection_property( 1095 struct drm_connector *connector); 1096 int drm_mode_create_aspect_ratio_property(struct drm_device *dev); 1097 int drm_mode_create_suggested_offset_properties(struct drm_device *dev); 1098 1099 int drm_mode_connector_set_path_property(struct drm_connector *connector, 1100 const char *path); 1101 int drm_mode_connector_set_tile_property(struct drm_connector *connector); 1102 int drm_mode_connector_update_edid_property(struct drm_connector *connector, 1103 const struct edid *edid); 1104 void drm_mode_connector_set_link_status_property(struct drm_connector *connector, 1105 uint64_t link_status); 1106 int drm_connector_init_panel_orientation_property( 1107 struct drm_connector *connector, int width, int height); 1108 1109 /** 1110 * struct drm_tile_group - Tile group metadata 1111 * @refcount: reference count 1112 * @dev: DRM device 1113 * @id: tile group id exposed to userspace 1114 * @group_data: Sink-private data identifying this group 1115 * 1116 * @group_data corresponds to displayid vend/prod/serial for external screens 1117 * with an EDID. 1118 */ 1119 struct drm_tile_group { 1120 struct kref refcount; 1121 struct drm_device *dev; 1122 int id; 1123 u8 group_data[8]; 1124 }; 1125 1126 struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, 1127 char topology[8]); 1128 struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, 1129 char topology[8]); 1130 void drm_mode_put_tile_group(struct drm_device *dev, 1131 struct drm_tile_group *tg); 1132 1133 /** 1134 * struct drm_connector_list_iter - connector_list iterator 1135 * 1136 * This iterator tracks state needed to be able to walk the connector_list 1137 * within struct drm_mode_config. Only use together with 1138 * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and 1139 * drm_connector_list_iter_next() respectively the convenience macro 1140 * drm_for_each_connector_iter(). 1141 */ 1142 struct drm_connector_list_iter { 1143 /* private: */ 1144 struct drm_device *dev; 1145 struct drm_connector *conn; 1146 }; 1147 1148 void drm_connector_list_iter_begin(struct drm_device *dev, 1149 struct drm_connector_list_iter *iter); 1150 struct drm_connector * 1151 drm_connector_list_iter_next(struct drm_connector_list_iter *iter); 1152 void drm_connector_list_iter_end(struct drm_connector_list_iter *iter); 1153 1154 /** 1155 * drm_for_each_connector_iter - connector_list iterator macro 1156 * @connector: &struct drm_connector pointer used as cursor 1157 * @iter: &struct drm_connector_list_iter 1158 * 1159 * Note that @connector is only valid within the list body, if you want to use 1160 * @connector after calling drm_connector_list_iter_end() then you need to grab 1161 * your own reference first using drm_connector_get(). 1162 */ 1163 #define drm_for_each_connector_iter(connector, iter) \ 1164 while ((connector = drm_connector_list_iter_next(iter))) 1165 1166 #endif 1167