1 /* 2 * Copyright (c) 2016 Intel Corporation 3 * 4 * Permission to use, copy, modify, distribute, and sell this software and its 5 * documentation for any purpose is hereby granted without fee, provided that 6 * the above copyright notice appear in all copies and that both that copyright 7 * notice and this permission notice appear in supporting documentation, and 8 * that the name of the copyright holders not be used in advertising or 9 * publicity pertaining to distribution of the software without specific, 10 * written prior permission. The copyright holders make no representations 11 * about the suitability of this software for any purpose. It is provided "as 12 * is" without express or implied warranty. 13 * 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 20 * OF THIS SOFTWARE. 21 */ 22 23 #ifndef __DRM_CONNECTOR_H__ 24 #define __DRM_CONNECTOR_H__ 25 26 #include <linux/list.h> 27 #include <linux/llist.h> 28 #include <linux/ctype.h> 29 #include <linux/hdmi.h> 30 #include <linux/notifier.h> 31 #include <drm/drm_mode_object.h> 32 #include <drm/drm_util.h> 33 34 #include <uapi/drm/drm_mode.h> 35 36 struct drm_connector_helper_funcs; 37 struct drm_modeset_acquire_ctx; 38 struct drm_device; 39 struct drm_crtc; 40 struct drm_encoder; 41 struct drm_property; 42 struct drm_property_blob; 43 struct drm_printer; 44 struct drm_privacy_screen; 45 struct edid; 46 struct i2c_adapter; 47 48 enum drm_connector_force { 49 DRM_FORCE_UNSPECIFIED, 50 DRM_FORCE_OFF, 51 DRM_FORCE_ON, /* force on analog part normally */ 52 DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ 53 }; 54 55 /** 56 * enum drm_connector_status - status for a &drm_connector 57 * 58 * This enum is used to track the connector status. There are no separate 59 * #defines for the uapi! 60 */ 61 enum drm_connector_status { 62 /** 63 * @connector_status_connected: The connector is definitely connected to 64 * a sink device, and can be enabled. 65 */ 66 connector_status_connected = 1, 67 /** 68 * @connector_status_disconnected: The connector isn't connected to a 69 * sink device which can be autodetect. For digital outputs like DP or 70 * HDMI (which can be realiable probed) this means there's really 71 * nothing there. It is driver-dependent whether a connector with this 72 * status can be lit up or not. 73 */ 74 connector_status_disconnected = 2, 75 /** 76 * @connector_status_unknown: The connector's status could not be 77 * reliably detected. This happens when probing would either cause 78 * flicker (like load-detection when the connector is in use), or when a 79 * hardware resource isn't available (like when load-detection needs a 80 * free CRTC). It should be possible to light up the connector with one 81 * of the listed fallback modes. For default configuration userspace 82 * should only try to light up connectors with unknown status when 83 * there's not connector with @connector_status_connected. 84 */ 85 connector_status_unknown = 3, 86 }; 87 88 /** 89 * enum drm_connector_registration_state - userspace registration status for 90 * a &drm_connector 91 * 92 * This enum is used to track the status of initializing a connector and 93 * registering it with userspace, so that DRM can prevent bogus modesets on 94 * connectors that no longer exist. 95 */ 96 enum drm_connector_registration_state { 97 /** 98 * @DRM_CONNECTOR_INITIALIZING: The connector has just been created, 99 * but has yet to be exposed to userspace. There should be no 100 * additional restrictions to how the state of this connector may be 101 * modified. 102 */ 103 DRM_CONNECTOR_INITIALIZING = 0, 104 105 /** 106 * @DRM_CONNECTOR_REGISTERED: The connector has been fully initialized 107 * and registered with sysfs, as such it has been exposed to 108 * userspace. There should be no additional restrictions to how the 109 * state of this connector may be modified. 110 */ 111 DRM_CONNECTOR_REGISTERED = 1, 112 113 /** 114 * @DRM_CONNECTOR_UNREGISTERED: The connector has either been exposed 115 * to userspace and has since been unregistered and removed from 116 * userspace, or the connector was unregistered before it had a chance 117 * to be exposed to userspace (e.g. still in the 118 * @DRM_CONNECTOR_INITIALIZING state). When a connector is 119 * unregistered, there are additional restrictions to how its state 120 * may be modified: 121 * 122 * - An unregistered connector may only have its DPMS changed from 123 * On->Off. Once DPMS is changed to Off, it may not be switched back 124 * to On. 125 * - Modesets are not allowed on unregistered connectors, unless they 126 * would result in disabling its assigned CRTCs. This means 127 * disabling a CRTC on an unregistered connector is OK, but enabling 128 * one is not. 129 * - Removing a CRTC from an unregistered connector is OK, but new 130 * CRTCs may never be assigned to an unregistered connector. 131 */ 132 DRM_CONNECTOR_UNREGISTERED = 2, 133 }; 134 135 enum subpixel_order { 136 SubPixelUnknown = 0, 137 SubPixelHorizontalRGB, 138 SubPixelHorizontalBGR, 139 SubPixelVerticalRGB, 140 SubPixelVerticalBGR, 141 SubPixelNone, 142 143 }; 144 145 /** 146 * struct drm_scrambling: sink's scrambling support. 147 */ 148 struct drm_scrambling { 149 /** 150 * @supported: scrambling supported for rates > 340 Mhz. 151 */ 152 bool supported; 153 /** 154 * @low_rates: scrambling supported for rates <= 340 Mhz. 155 */ 156 bool low_rates; 157 }; 158 159 /* 160 * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink 161 * 162 * Provides SCDC register support and capabilities related information on a 163 * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0. 164 */ 165 struct drm_scdc { 166 /** 167 * @supported: status control & data channel present. 168 */ 169 bool supported; 170 /** 171 * @read_request: sink is capable of generating scdc read request. 172 */ 173 bool read_request; 174 /** 175 * @scrambling: sink's scrambling capabilities 176 */ 177 struct drm_scrambling scrambling; 178 }; 179 180 /** 181 * struct drm_hdmi_dsc_cap - DSC capabilities of HDMI sink 182 * 183 * Describes the DSC support provided by HDMI 2.1 sink. 184 * The information is fetched fom additional HFVSDB blocks defined 185 * for HDMI 2.1. 186 */ 187 struct drm_hdmi_dsc_cap { 188 /** @v_1p2: flag for dsc1.2 version support by sink */ 189 bool v_1p2; 190 191 /** @native_420: Does sink support DSC with 4:2:0 compression */ 192 bool native_420; 193 194 /** 195 * @all_bpp: Does sink support all bpp with 4:4:4: or 4:2:2 196 * compressed formats 197 */ 198 bool all_bpp; 199 200 /** 201 * @bpc_supported: compressed bpc supported by sink : 10, 12 or 16 bpc 202 */ 203 u8 bpc_supported; 204 205 /** @max_slices: maximum number of Horizontal slices supported by */ 206 u8 max_slices; 207 208 /** @clk_per_slice : max pixel clock in MHz supported per slice */ 209 int clk_per_slice; 210 211 /** @max_lanes : dsc max lanes supported for Fixed rate Link training */ 212 u8 max_lanes; 213 214 /** @max_frl_rate_per_lane : maximum frl rate with DSC per lane */ 215 u8 max_frl_rate_per_lane; 216 217 /** @total_chunk_kbytes: max size of chunks in KBs supported per line*/ 218 u8 total_chunk_kbytes; 219 }; 220 221 /** 222 * struct drm_hdmi_info - runtime information about the connected HDMI sink 223 * 224 * Describes if a given display supports advanced HDMI 2.0 features. 225 * This information is available in CEA-861-F extension blocks (like HF-VSDB). 226 */ 227 struct drm_hdmi_info { 228 /** @scdc: sink's scdc support and capabilities */ 229 struct drm_scdc scdc; 230 231 /** 232 * @y420_vdb_modes: bitmap of modes which can support ycbcr420 233 * output only (not normal RGB/YCBCR444/422 outputs). The max VIC 234 * defined by the CEA-861-G spec is 219, so the size is 256 bits to map 235 * up to 256 VICs. 236 */ 237 unsigned long y420_vdb_modes[BITS_TO_LONGS(256)]; 238 239 /** 240 * @y420_cmdb_modes: bitmap of modes which can support ycbcr420 241 * output also, along with normal HDMI outputs. The max VIC defined by 242 * the CEA-861-G spec is 219, so the size is 256 bits to map up to 256 243 * VICs. 244 */ 245 unsigned long y420_cmdb_modes[BITS_TO_LONGS(256)]; 246 247 /** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */ 248 u64 y420_cmdb_map; 249 250 /** @y420_dc_modes: bitmap of deep color support index */ 251 u8 y420_dc_modes; 252 253 /** @max_frl_rate_per_lane: support fixed rate link */ 254 u8 max_frl_rate_per_lane; 255 256 /** @max_lanes: supported by sink */ 257 u8 max_lanes; 258 259 /** @dsc_cap: DSC capabilities of the sink */ 260 struct drm_hdmi_dsc_cap dsc_cap; 261 }; 262 263 /** 264 * enum drm_link_status - connector's link_status property value 265 * 266 * This enum is used as the connector's link status property value. 267 * It is set to the values defined in uapi. 268 * 269 * @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful 270 * link training 271 * @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training 272 * failure 273 */ 274 enum drm_link_status { 275 DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD, 276 DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD, 277 }; 278 279 /** 280 * enum drm_panel_orientation - panel_orientation info for &drm_display_info 281 * 282 * This enum is used to track the (LCD) panel orientation. There are no 283 * separate #defines for the uapi! 284 * 285 * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any 286 * panel orientation information (normal 287 * for non panels) in this case the "panel 288 * orientation" connector prop will not be 289 * attached. 290 * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the 291 * top side of the device's casing. 292 * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the 293 * bottom side of the device's casing, iow 294 * the panel is mounted upside-down. 295 * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the 296 * top side of the device's casing. 297 * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the 298 * top side of the device's casing. 299 */ 300 enum drm_panel_orientation { 301 DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1, 302 DRM_MODE_PANEL_ORIENTATION_NORMAL = 0, 303 DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, 304 DRM_MODE_PANEL_ORIENTATION_LEFT_UP, 305 DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, 306 }; 307 308 /** 309 * struct drm_monitor_range_info - Panel's Monitor range in EDID for 310 * &drm_display_info 311 * 312 * This struct is used to store a frequency range supported by panel 313 * as parsed from EDID's detailed monitor range descriptor block. 314 * 315 * @min_vfreq: This is the min supported refresh rate in Hz from 316 * EDID's detailed monitor range. 317 * @max_vfreq: This is the max supported refresh rate in Hz from 318 * EDID's detailed monitor range 319 */ 320 struct drm_monitor_range_info { 321 u8 min_vfreq; 322 u8 max_vfreq; 323 }; 324 325 /** 326 * enum drm_privacy_screen_status - privacy screen status 327 * 328 * This enum is used to track and control the state of the integrated privacy 329 * screen present on some display panels, via the "privacy-screen sw-state" 330 * and "privacy-screen hw-state" properties. Note the _LOCKED enum values 331 * are only valid for the "privacy-screen hw-state" property. 332 * 333 * @PRIVACY_SCREEN_DISABLED: 334 * The privacy-screen on the panel is disabled 335 * @PRIVACY_SCREEN_ENABLED: 336 * The privacy-screen on the panel is enabled 337 * @PRIVACY_SCREEN_DISABLED_LOCKED: 338 * The privacy-screen on the panel is disabled and locked (cannot be changed) 339 * @PRIVACY_SCREEN_ENABLED_LOCKED: 340 * The privacy-screen on the panel is enabled and locked (cannot be changed) 341 */ 342 enum drm_privacy_screen_status { 343 PRIVACY_SCREEN_DISABLED = 0, 344 PRIVACY_SCREEN_ENABLED, 345 PRIVACY_SCREEN_DISABLED_LOCKED, 346 PRIVACY_SCREEN_ENABLED_LOCKED, 347 }; 348 349 /* 350 * This is a consolidated colorimetry list supported by HDMI and 351 * DP protocol standard. The respective connectors will register 352 * a property with the subset of this list (supported by that 353 * respective protocol). Userspace will set the colorspace through 354 * a colorspace property which will be created and exposed to 355 * userspace. 356 */ 357 358 /* For Default case, driver will set the colorspace */ 359 #define DRM_MODE_COLORIMETRY_DEFAULT 0 360 /* CEA 861 Normal Colorimetry options */ 361 #define DRM_MODE_COLORIMETRY_NO_DATA 0 362 #define DRM_MODE_COLORIMETRY_SMPTE_170M_YCC 1 363 #define DRM_MODE_COLORIMETRY_BT709_YCC 2 364 /* CEA 861 Extended Colorimetry Options */ 365 #define DRM_MODE_COLORIMETRY_XVYCC_601 3 366 #define DRM_MODE_COLORIMETRY_XVYCC_709 4 367 #define DRM_MODE_COLORIMETRY_SYCC_601 5 368 #define DRM_MODE_COLORIMETRY_OPYCC_601 6 369 #define DRM_MODE_COLORIMETRY_OPRGB 7 370 #define DRM_MODE_COLORIMETRY_BT2020_CYCC 8 371 #define DRM_MODE_COLORIMETRY_BT2020_RGB 9 372 #define DRM_MODE_COLORIMETRY_BT2020_YCC 10 373 /* Additional Colorimetry extension added as part of CTA 861.G */ 374 #define DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65 11 375 #define DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER 12 376 /* Additional Colorimetry Options added for DP 1.4a VSC Colorimetry Format */ 377 #define DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED 13 378 #define DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT 14 379 #define DRM_MODE_COLORIMETRY_BT601_YCC 15 380 381 /** 382 * enum drm_bus_flags - bus_flags info for &drm_display_info 383 * 384 * This enum defines signal polarities and clock edge information for signals on 385 * a bus as bitmask flags. 386 * 387 * The clock edge information is conveyed by two sets of symbols, 388 * DRM_BUS_FLAGS_*_DRIVE_\* and DRM_BUS_FLAGS_*_SAMPLE_\*. When this enum is 389 * used to describe a bus from the point of view of the transmitter, the 390 * \*_DRIVE_\* flags should be used. When used from the point of view of the 391 * receiver, the \*_SAMPLE_\* flags should be used. The \*_DRIVE_\* and 392 * \*_SAMPLE_\* flags alias each other, with the \*_SAMPLE_POSEDGE and 393 * \*_SAMPLE_NEGEDGE flags being equal to \*_DRIVE_NEGEDGE and \*_DRIVE_POSEDGE 394 * respectively. This simplifies code as signals are usually sampled on the 395 * opposite edge of the driving edge. Transmitters and receivers may however 396 * need to take other signal timings into account to convert between driving 397 * and sample edges. 398 */ 399 enum drm_bus_flags { 400 /** 401 * @DRM_BUS_FLAG_DE_LOW: 402 * 403 * The Data Enable signal is active low 404 */ 405 DRM_BUS_FLAG_DE_LOW = BIT(0), 406 407 /** 408 * @DRM_BUS_FLAG_DE_HIGH: 409 * 410 * The Data Enable signal is active high 411 */ 412 DRM_BUS_FLAG_DE_HIGH = BIT(1), 413 414 /** 415 * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: 416 * 417 * Data is driven on the rising edge of the pixel clock 418 */ 419 DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = BIT(2), 420 421 /** 422 * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: 423 * 424 * Data is driven on the falling edge of the pixel clock 425 */ 426 DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = BIT(3), 427 428 /** 429 * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE: 430 * 431 * Data is sampled on the rising edge of the pixel clock 432 */ 433 DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, 434 435 /** 436 * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE: 437 * 438 * Data is sampled on the falling edge of the pixel clock 439 */ 440 DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, 441 442 /** 443 * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: 444 * 445 * Data is transmitted MSB to LSB on the bus 446 */ 447 DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4), 448 449 /** 450 * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: 451 * 452 * Data is transmitted LSB to MSB on the bus 453 */ 454 DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5), 455 456 /** 457 * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: 458 * 459 * Sync signals are driven on the rising edge of the pixel clock 460 */ 461 DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = BIT(6), 462 463 /** 464 * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: 465 * 466 * Sync signals are driven on the falling edge of the pixel clock 467 */ 468 DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = BIT(7), 469 470 /** 471 * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE: 472 * 473 * Sync signals are sampled on the rising edge of the pixel clock 474 */ 475 DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE, 476 477 /** 478 * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE: 479 * 480 * Sync signals are sampled on the falling edge of the pixel clock 481 */ 482 DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, 483 484 /** 485 * @DRM_BUS_FLAG_SHARP_SIGNALS: 486 * 487 * Set if the Sharp-specific signals (SPL, CLS, PS, REV) must be used 488 */ 489 DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8), 490 }; 491 492 /** 493 * struct drm_display_info - runtime data about the connected sink 494 * 495 * Describes a given display (e.g. CRT or flat panel) and its limitations. For 496 * fixed display sinks like built-in panels there's not much difference between 497 * this and &struct drm_connector. But for sinks with a real cable this 498 * structure is meant to describe all the things at the other end of the cable. 499 * 500 * For sinks which provide an EDID this can be filled out by calling 501 * drm_add_edid_modes(). 502 */ 503 struct drm_display_info { 504 /** 505 * @width_mm: Physical width in mm. 506 */ 507 unsigned int width_mm; 508 509 /** 510 * @height_mm: Physical height in mm. 511 */ 512 unsigned int height_mm; 513 514 /** 515 * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs. 516 */ 517 unsigned int bpc; 518 519 /** 520 * @subpixel_order: Subpixel order of LCD panels. 521 */ 522 enum subpixel_order subpixel_order; 523 524 #define DRM_COLOR_FORMAT_RGB444 (1<<0) 525 #define DRM_COLOR_FORMAT_YCBCR444 (1<<1) 526 #define DRM_COLOR_FORMAT_YCBCR422 (1<<2) 527 #define DRM_COLOR_FORMAT_YCBCR420 (1<<3) 528 529 /** 530 * @panel_orientation: Read only connector property for built-in panels, 531 * indicating the orientation of the panel vs the device's casing. 532 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. 533 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the 534 * fb to compensate and gets exported as prop to userspace. 535 */ 536 int panel_orientation; 537 538 /** 539 * @color_formats: HDMI Color formats, selects between RGB and YCrCb 540 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones 541 * as used to describe the pixel format in framebuffers, and also don't 542 * match the formats in @bus_formats which are shared with v4l. 543 */ 544 u32 color_formats; 545 546 /** 547 * @bus_formats: Pixel data format on the wire, somewhat redundant with 548 * @color_formats. Array of size @num_bus_formats encoded using 549 * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers. 550 */ 551 const u32 *bus_formats; 552 /** 553 * @num_bus_formats: Size of @bus_formats array. 554 */ 555 unsigned int num_bus_formats; 556 557 /** 558 * @bus_flags: Additional information (like pixel signal polarity) for 559 * the pixel data on the bus, using &enum drm_bus_flags values 560 * DRM_BUS_FLAGS\_. 561 */ 562 u32 bus_flags; 563 564 /** 565 * @max_tmds_clock: Maximum TMDS clock rate supported by the 566 * sink in kHz. 0 means undefined. 567 */ 568 int max_tmds_clock; 569 570 /** 571 * @dvi_dual: Dual-link DVI sink? 572 */ 573 bool dvi_dual; 574 575 /** 576 * @is_hdmi: True if the sink is an HDMI device. 577 * 578 * This field shall be used instead of calling 579 * drm_detect_hdmi_monitor() when possible. 580 */ 581 bool is_hdmi; 582 583 /** 584 * @has_hdmi_infoframe: Does the sink support the HDMI infoframe? 585 */ 586 bool has_hdmi_infoframe; 587 588 /** 589 * @rgb_quant_range_selectable: Does the sink support selecting 590 * the RGB quantization range? 591 */ 592 bool rgb_quant_range_selectable; 593 594 /** 595 * @edid_hdmi_rgb444_dc_modes: Mask of supported hdmi deep color modes 596 * in RGB 4:4:4. Even more stuff redundant with @bus_formats. 597 */ 598 u8 edid_hdmi_rgb444_dc_modes; 599 600 /** 601 * @edid_hdmi_ycbcr444_dc_modes: Mask of supported hdmi deep color 602 * modes in YCbCr 4:4:4. Even more stuff redundant with @bus_formats. 603 */ 604 u8 edid_hdmi_ycbcr444_dc_modes; 605 606 /** 607 * @cea_rev: CEA revision of the HDMI sink. 608 */ 609 u8 cea_rev; 610 611 /** 612 * @hdmi: advance features of a HDMI sink. 613 */ 614 struct drm_hdmi_info hdmi; 615 616 /** 617 * @non_desktop: Non desktop display (HMD). 618 */ 619 bool non_desktop; 620 621 /** 622 * @monitor_range: Frequency range supported by monitor range descriptor 623 */ 624 struct drm_monitor_range_info monitor_range; 625 626 /** 627 * @mso_stream_count: eDP Multi-SST Operation (MSO) stream count from 628 * the DisplayID VESA vendor block. 0 for conventional Single-Stream 629 * Transport (SST), or 2 or 4 MSO streams. 630 */ 631 u8 mso_stream_count; 632 633 /** 634 * @mso_pixel_overlap: eDP MSO segment pixel overlap, 0-8 pixels. 635 */ 636 u8 mso_pixel_overlap; 637 }; 638 639 int drm_display_info_set_bus_formats(struct drm_display_info *info, 640 const u32 *formats, 641 unsigned int num_formats); 642 643 /** 644 * struct drm_connector_tv_margins - TV connector related margins 645 * 646 * Describes the margins in pixels to put around the image on TV 647 * connectors to deal with overscan. 648 */ 649 struct drm_connector_tv_margins { 650 /** 651 * @bottom: Bottom margin in pixels. 652 */ 653 unsigned int bottom; 654 655 /** 656 * @left: Left margin in pixels. 657 */ 658 unsigned int left; 659 660 /** 661 * @right: Right margin in pixels. 662 */ 663 unsigned int right; 664 665 /** 666 * @top: Top margin in pixels. 667 */ 668 unsigned int top; 669 }; 670 671 /** 672 * struct drm_tv_connector_state - TV connector related states 673 * @subconnector: selected subconnector 674 * @margins: TV margins 675 * @mode: TV mode 676 * @brightness: brightness in percent 677 * @contrast: contrast in percent 678 * @flicker_reduction: flicker reduction in percent 679 * @overscan: overscan in percent 680 * @saturation: saturation in percent 681 * @hue: hue in percent 682 */ 683 struct drm_tv_connector_state { 684 enum drm_mode_subconnector subconnector; 685 struct drm_connector_tv_margins margins; 686 unsigned int mode; 687 unsigned int brightness; 688 unsigned int contrast; 689 unsigned int flicker_reduction; 690 unsigned int overscan; 691 unsigned int saturation; 692 unsigned int hue; 693 }; 694 695 /** 696 * struct drm_connector_state - mutable connector state 697 */ 698 struct drm_connector_state { 699 /** @connector: backpointer to the connector */ 700 struct drm_connector *connector; 701 702 /** 703 * @crtc: CRTC to connect connector to, NULL if disabled. 704 * 705 * Do not change this directly, use drm_atomic_set_crtc_for_connector() 706 * instead. 707 */ 708 struct drm_crtc *crtc; 709 710 /** 711 * @best_encoder: 712 * 713 * Used by the atomic helpers to select the encoder, through the 714 * &drm_connector_helper_funcs.atomic_best_encoder or 715 * &drm_connector_helper_funcs.best_encoder callbacks. 716 * 717 * This is also used in the atomic helpers to map encoders to their 718 * current and previous connectors, see 719 * drm_atomic_get_old_connector_for_encoder() and 720 * drm_atomic_get_new_connector_for_encoder(). 721 * 722 * NOTE: Atomic drivers must fill this out (either themselves or through 723 * helpers), for otherwise the GETCONNECTOR and GETENCODER IOCTLs will 724 * not return correct data to userspace. 725 */ 726 struct drm_encoder *best_encoder; 727 728 /** 729 * @link_status: Connector link_status to keep track of whether link is 730 * GOOD or BAD to notify userspace if retraining is necessary. 731 */ 732 enum drm_link_status link_status; 733 734 /** @state: backpointer to global drm_atomic_state */ 735 struct drm_atomic_state *state; 736 737 /** 738 * @commit: Tracks the pending commit to prevent use-after-free conditions. 739 * 740 * Is only set when @crtc is NULL. 741 */ 742 struct drm_crtc_commit *commit; 743 744 /** @tv: TV connector state */ 745 struct drm_tv_connector_state tv; 746 747 /** 748 * @self_refresh_aware: 749 * 750 * This tracks whether a connector is aware of the self refresh state. 751 * It should be set to true for those connector implementations which 752 * understand the self refresh state. This is needed since the crtc 753 * registers the self refresh helpers and it doesn't know if the 754 * connectors downstream have implemented self refresh entry/exit. 755 * 756 * Drivers should set this to true in atomic_check if they know how to 757 * handle self_refresh requests. 758 */ 759 bool self_refresh_aware; 760 761 /** 762 * @picture_aspect_ratio: Connector property to control the 763 * HDMI infoframe aspect ratio setting. 764 * 765 * The %DRM_MODE_PICTURE_ASPECT_\* values much match the 766 * values for &enum hdmi_picture_aspect 767 */ 768 enum hdmi_picture_aspect picture_aspect_ratio; 769 770 /** 771 * @content_type: Connector property to control the 772 * HDMI infoframe content type setting. 773 * The %DRM_MODE_CONTENT_TYPE_\* values much 774 * match the values. 775 */ 776 unsigned int content_type; 777 778 /** 779 * @hdcp_content_type: Connector property to pass the type of 780 * protected content. This is most commonly used for HDCP. 781 */ 782 unsigned int hdcp_content_type; 783 784 /** 785 * @scaling_mode: Connector property to control the 786 * upscaling, mostly used for built-in panels. 787 */ 788 unsigned int scaling_mode; 789 790 /** 791 * @content_protection: Connector property to request content 792 * protection. This is most commonly used for HDCP. 793 */ 794 unsigned int content_protection; 795 796 /** 797 * @colorspace: State variable for Connector property to request 798 * colorspace change on Sink. This is most commonly used to switch 799 * to wider color gamuts like BT2020. 800 */ 801 u32 colorspace; 802 803 /** 804 * @writeback_job: Writeback job for writeback connectors 805 * 806 * Holds the framebuffer and out-fence for a writeback connector. As 807 * the writeback completion may be asynchronous to the normal commit 808 * cycle, the writeback job lifetime is managed separately from the 809 * normal atomic state by this object. 810 * 811 * See also: drm_writeback_queue_job() and 812 * drm_writeback_signal_completion() 813 */ 814 struct drm_writeback_job *writeback_job; 815 816 /** 817 * @max_requested_bpc: Connector property to limit the maximum bit 818 * depth of the pixels. 819 */ 820 u8 max_requested_bpc; 821 822 /** 823 * @max_bpc: Connector max_bpc based on the requested max_bpc property 824 * and the connector bpc limitations obtained from edid. 825 */ 826 u8 max_bpc; 827 828 /** 829 * @privacy_screen_sw_state: See :ref:`Standard Connector 830 * Properties<standard_connector_properties>` 831 */ 832 enum drm_privacy_screen_status privacy_screen_sw_state; 833 834 /** 835 * @hdr_output_metadata: 836 * DRM blob property for HDR output metadata 837 */ 838 struct drm_property_blob *hdr_output_metadata; 839 }; 840 841 /** 842 * struct drm_connector_funcs - control connectors on a given device 843 * 844 * Each CRTC may have one or more connectors attached to it. The functions 845 * below allow the core DRM code to control connectors, enumerate available modes, 846 * etc. 847 */ 848 struct drm_connector_funcs { 849 /** 850 * @dpms: 851 * 852 * Legacy entry point to set the per-connector DPMS state. Legacy DPMS 853 * is exposed as a standard property on the connector, but diverted to 854 * this callback in the drm core. Note that atomic drivers don't 855 * implement the 4 level DPMS support on the connector any more, but 856 * instead only have an on/off "ACTIVE" property on the CRTC object. 857 * 858 * This hook is not used by atomic drivers, remapping of the legacy DPMS 859 * property is entirely handled in the DRM core. 860 * 861 * RETURNS: 862 * 863 * 0 on success or a negative error code on failure. 864 */ 865 int (*dpms)(struct drm_connector *connector, int mode); 866 867 /** 868 * @reset: 869 * 870 * Reset connector hardware and software state to off. This function isn't 871 * called by the core directly, only through drm_mode_config_reset(). 872 * It's not a helper hook only for historical reasons. 873 * 874 * Atomic drivers can use drm_atomic_helper_connector_reset() to reset 875 * atomic state using this hook. 876 */ 877 void (*reset)(struct drm_connector *connector); 878 879 /** 880 * @detect: 881 * 882 * Check to see if anything is attached to the connector. The parameter 883 * force is set to false whilst polling, true when checking the 884 * connector due to a user request. force can be used by the driver to 885 * avoid expensive, destructive operations during automated probing. 886 * 887 * This callback is optional, if not implemented the connector will be 888 * considered as always being attached. 889 * 890 * FIXME: 891 * 892 * Note that this hook is only called by the probe helper. It's not in 893 * the helper library vtable purely for historical reasons. The only DRM 894 * core entry point to probe connector state is @fill_modes. 895 * 896 * Note that the helper library will already hold 897 * &drm_mode_config.connection_mutex. Drivers which need to grab additional 898 * locks to avoid races with concurrent modeset changes need to use 899 * &drm_connector_helper_funcs.detect_ctx instead. 900 * 901 * Also note that this callback can be called no matter the 902 * state the connector is in. Drivers that need the underlying 903 * device to be powered to perform the detection will first need 904 * to make sure it's been properly enabled. 905 * 906 * RETURNS: 907 * 908 * drm_connector_status indicating the connector's status. 909 */ 910 enum drm_connector_status (*detect)(struct drm_connector *connector, 911 bool force); 912 913 /** 914 * @force: 915 * 916 * This function is called to update internal encoder state when the 917 * connector is forced to a certain state by userspace, either through 918 * the sysfs interfaces or on the kernel cmdline. In that case the 919 * @detect callback isn't called. 920 * 921 * FIXME: 922 * 923 * Note that this hook is only called by the probe helper. It's not in 924 * the helper library vtable purely for historical reasons. The only DRM 925 * core entry point to probe connector state is @fill_modes. 926 */ 927 void (*force)(struct drm_connector *connector); 928 929 /** 930 * @fill_modes: 931 * 932 * Entry point for output detection and basic mode validation. The 933 * driver should reprobe the output if needed (e.g. when hotplug 934 * handling is unreliable), add all detected modes to &drm_connector.modes 935 * and filter out any the device can't support in any configuration. It 936 * also needs to filter out any modes wider or higher than the 937 * parameters max_width and max_height indicate. 938 * 939 * The drivers must also prune any modes no longer valid from 940 * &drm_connector.modes. Furthermore it must update 941 * &drm_connector.status and &drm_connector.edid. If no EDID has been 942 * received for this output connector->edid must be NULL. 943 * 944 * Drivers using the probe helpers should use 945 * drm_helper_probe_single_connector_modes() to implement this 946 * function. 947 * 948 * RETURNS: 949 * 950 * The number of modes detected and filled into &drm_connector.modes. 951 */ 952 int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); 953 954 /** 955 * @set_property: 956 * 957 * This is the legacy entry point to update a property attached to the 958 * connector. 959 * 960 * This callback is optional if the driver does not support any legacy 961 * driver-private properties. For atomic drivers it is not used because 962 * property handling is done entirely in the DRM core. 963 * 964 * RETURNS: 965 * 966 * 0 on success or a negative error code on failure. 967 */ 968 int (*set_property)(struct drm_connector *connector, struct drm_property *property, 969 uint64_t val); 970 971 /** 972 * @late_register: 973 * 974 * This optional hook can be used to register additional userspace 975 * interfaces attached to the connector, light backlight control, i2c, 976 * DP aux or similar interfaces. It is called late in the driver load 977 * sequence from drm_connector_register() when registering all the 978 * core drm connector interfaces. Everything added from this callback 979 * should be unregistered in the early_unregister callback. 980 * 981 * This is called while holding &drm_connector.mutex. 982 * 983 * Returns: 984 * 985 * 0 on success, or a negative error code on failure. 986 */ 987 int (*late_register)(struct drm_connector *connector); 988 989 /** 990 * @early_unregister: 991 * 992 * This optional hook should be used to unregister the additional 993 * userspace interfaces attached to the connector from 994 * late_register(). It is called from drm_connector_unregister(), 995 * early in the driver unload sequence to disable userspace access 996 * before data structures are torndown. 997 * 998 * This is called while holding &drm_connector.mutex. 999 */ 1000 void (*early_unregister)(struct drm_connector *connector); 1001 1002 /** 1003 * @destroy: 1004 * 1005 * Clean up connector resources. This is called at driver unload time 1006 * through drm_mode_config_cleanup(). It can also be called at runtime 1007 * when a connector is being hot-unplugged for drivers that support 1008 * connector hotplugging (e.g. DisplayPort MST). 1009 */ 1010 void (*destroy)(struct drm_connector *connector); 1011 1012 /** 1013 * @atomic_duplicate_state: 1014 * 1015 * Duplicate the current atomic state for this connector and return it. 1016 * The core and helpers guarantee that any atomic state duplicated with 1017 * this hook and still owned by the caller (i.e. not transferred to the 1018 * driver by calling &drm_mode_config_funcs.atomic_commit) will be 1019 * cleaned up by calling the @atomic_destroy_state hook in this 1020 * structure. 1021 * 1022 * This callback is mandatory for atomic drivers. 1023 * 1024 * Atomic drivers which don't subclass &struct drm_connector_state should use 1025 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the 1026 * state structure to extend it with driver-private state should use 1027 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is 1028 * duplicated in a consistent fashion across drivers. 1029 * 1030 * It is an error to call this hook before &drm_connector.state has been 1031 * initialized correctly. 1032 * 1033 * NOTE: 1034 * 1035 * If the duplicate state references refcounted resources this hook must 1036 * acquire a reference for each of them. The driver must release these 1037 * references again in @atomic_destroy_state. 1038 * 1039 * RETURNS: 1040 * 1041 * Duplicated atomic state or NULL when the allocation failed. 1042 */ 1043 struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); 1044 1045 /** 1046 * @atomic_destroy_state: 1047 * 1048 * Destroy a state duplicated with @atomic_duplicate_state and release 1049 * or unreference all resources it references 1050 * 1051 * This callback is mandatory for atomic drivers. 1052 */ 1053 void (*atomic_destroy_state)(struct drm_connector *connector, 1054 struct drm_connector_state *state); 1055 1056 /** 1057 * @atomic_set_property: 1058 * 1059 * Decode a driver-private property value and store the decoded value 1060 * into the passed-in state structure. Since the atomic core decodes all 1061 * standardized properties (even for extensions beyond the core set of 1062 * properties which might not be implemented by all drivers) this 1063 * requires drivers to subclass the state structure. 1064 * 1065 * Such driver-private properties should really only be implemented for 1066 * truly hardware/vendor specific state. Instead it is preferred to 1067 * standardize atomic extension and decode the properties used to expose 1068 * such an extension in the core. 1069 * 1070 * Do not call this function directly, use 1071 * drm_atomic_connector_set_property() instead. 1072 * 1073 * This callback is optional if the driver does not support any 1074 * driver-private atomic properties. 1075 * 1076 * NOTE: 1077 * 1078 * This function is called in the state assembly phase of atomic 1079 * modesets, which can be aborted for any reason (including on 1080 * userspace's request to just check whether a configuration would be 1081 * possible). Drivers MUST NOT touch any persistent state (hardware or 1082 * software) or data structures except the passed in @state parameter. 1083 * 1084 * Also since userspace controls in which order properties are set this 1085 * function must not do any input validation (since the state update is 1086 * incomplete and hence likely inconsistent). Instead any such input 1087 * validation must be done in the various atomic_check callbacks. 1088 * 1089 * RETURNS: 1090 * 1091 * 0 if the property has been found, -EINVAL if the property isn't 1092 * implemented by the driver (which shouldn't ever happen, the core only 1093 * asks for properties attached to this connector). No other validation 1094 * is allowed by the driver. The core already checks that the property 1095 * value is within the range (integer, valid enum value, ...) the driver 1096 * set when registering the property. 1097 */ 1098 int (*atomic_set_property)(struct drm_connector *connector, 1099 struct drm_connector_state *state, 1100 struct drm_property *property, 1101 uint64_t val); 1102 1103 /** 1104 * @atomic_get_property: 1105 * 1106 * Reads out the decoded driver-private property. This is used to 1107 * implement the GETCONNECTOR IOCTL. 1108 * 1109 * Do not call this function directly, use 1110 * drm_atomic_connector_get_property() instead. 1111 * 1112 * This callback is optional if the driver does not support any 1113 * driver-private atomic properties. 1114 * 1115 * RETURNS: 1116 * 1117 * 0 on success, -EINVAL if the property isn't implemented by the 1118 * driver (which shouldn't ever happen, the core only asks for 1119 * properties attached to this connector). 1120 */ 1121 int (*atomic_get_property)(struct drm_connector *connector, 1122 const struct drm_connector_state *state, 1123 struct drm_property *property, 1124 uint64_t *val); 1125 1126 /** 1127 * @atomic_print_state: 1128 * 1129 * If driver subclasses &struct drm_connector_state, it should implement 1130 * this optional hook for printing additional driver specific state. 1131 * 1132 * Do not call this directly, use drm_atomic_connector_print_state() 1133 * instead. 1134 */ 1135 void (*atomic_print_state)(struct drm_printer *p, 1136 const struct drm_connector_state *state); 1137 1138 /** 1139 * @oob_hotplug_event: 1140 * 1141 * This will get called when a hotplug-event for a drm-connector 1142 * has been received from a source outside the display driver / device. 1143 */ 1144 void (*oob_hotplug_event)(struct drm_connector *connector); 1145 1146 /** 1147 * @debugfs_init: 1148 * 1149 * Allows connectors to create connector-specific debugfs files. 1150 */ 1151 void (*debugfs_init)(struct drm_connector *connector, struct dentry *root); 1152 }; 1153 1154 /** 1155 * struct drm_cmdline_mode - DRM Mode passed through the kernel command-line 1156 * 1157 * Each connector can have an initial mode with additional options 1158 * passed through the kernel command line. This structure allows to 1159 * express those parameters and will be filled by the command-line 1160 * parser. 1161 */ 1162 struct drm_cmdline_mode { 1163 /** 1164 * @name: 1165 * 1166 * Name of the mode. 1167 */ 1168 char name[DRM_DISPLAY_MODE_LEN]; 1169 1170 /** 1171 * @specified: 1172 * 1173 * Has a mode been read from the command-line? 1174 */ 1175 bool specified; 1176 1177 /** 1178 * @refresh_specified: 1179 * 1180 * Did the mode have a preferred refresh rate? 1181 */ 1182 bool refresh_specified; 1183 1184 /** 1185 * @bpp_specified: 1186 * 1187 * Did the mode have a preferred BPP? 1188 */ 1189 bool bpp_specified; 1190 1191 /** 1192 * @xres: 1193 * 1194 * Active resolution on the X axis, in pixels. 1195 */ 1196 int xres; 1197 1198 /** 1199 * @yres: 1200 * 1201 * Active resolution on the Y axis, in pixels. 1202 */ 1203 int yres; 1204 1205 /** 1206 * @bpp: 1207 * 1208 * Bits per pixels for the mode. 1209 */ 1210 int bpp; 1211 1212 /** 1213 * @refresh: 1214 * 1215 * Refresh rate, in Hertz. 1216 */ 1217 int refresh; 1218 1219 /** 1220 * @rb: 1221 * 1222 * Do we need to use reduced blanking? 1223 */ 1224 bool rb; 1225 1226 /** 1227 * @interlace: 1228 * 1229 * The mode is interlaced. 1230 */ 1231 bool interlace; 1232 1233 /** 1234 * @cvt: 1235 * 1236 * The timings will be calculated using the VESA Coordinated 1237 * Video Timings instead of looking up the mode from a table. 1238 */ 1239 bool cvt; 1240 1241 /** 1242 * @margins: 1243 * 1244 * Add margins to the mode calculation (1.8% of xres rounded 1245 * down to 8 pixels and 1.8% of yres). 1246 */ 1247 bool margins; 1248 1249 /** 1250 * @force: 1251 * 1252 * Ignore the hotplug state of the connector, and force its 1253 * state to one of the DRM_FORCE_* values. 1254 */ 1255 enum drm_connector_force force; 1256 1257 /** 1258 * @rotation_reflection: 1259 * 1260 * Initial rotation and reflection of the mode setup from the 1261 * command line. See DRM_MODE_ROTATE_* and 1262 * DRM_MODE_REFLECT_*. The only rotations supported are 1263 * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180. 1264 */ 1265 unsigned int rotation_reflection; 1266 1267 /** 1268 * @panel_orientation: 1269 * 1270 * drm-connector "panel orientation" property override value, 1271 * DRM_MODE_PANEL_ORIENTATION_UNKNOWN if not set. 1272 */ 1273 enum drm_panel_orientation panel_orientation; 1274 1275 /** 1276 * @tv_margins: TV margins to apply to the mode. 1277 */ 1278 struct drm_connector_tv_margins tv_margins; 1279 }; 1280 1281 /** 1282 * struct drm_connector - central DRM connector control structure 1283 * 1284 * Each connector may be connected to one or more CRTCs, or may be clonable by 1285 * another connector if they can share a CRTC. Each connector also has a specific 1286 * position in the broader display (referred to as a 'screen' though it could 1287 * span multiple monitors). 1288 */ 1289 struct drm_connector { 1290 /** @dev: parent DRM device */ 1291 struct drm_device *dev; 1292 /** @kdev: kernel device for sysfs attributes */ 1293 struct device *kdev; 1294 /** @attr: sysfs attributes */ 1295 struct device_attribute *attr; 1296 /** 1297 * @fwnode: associated fwnode supplied by platform firmware 1298 * 1299 * Drivers can set this to associate a fwnode with a connector, drivers 1300 * are expected to get a reference on the fwnode when setting this. 1301 * drm_connector_cleanup() will call fwnode_handle_put() on this. 1302 */ 1303 struct fwnode_handle *fwnode; 1304 1305 /** 1306 * @head: 1307 * 1308 * List of all connectors on a @dev, linked from 1309 * &drm_mode_config.connector_list. Protected by 1310 * &drm_mode_config.connector_list_lock, but please only use 1311 * &drm_connector_list_iter to walk this list. 1312 */ 1313 struct list_head head; 1314 1315 /** 1316 * @global_connector_list_entry: 1317 * 1318 * Connector entry in the global connector-list, used by 1319 * drm_connector_find_by_fwnode(). 1320 */ 1321 struct list_head global_connector_list_entry; 1322 1323 /** @base: base KMS object */ 1324 struct drm_mode_object base; 1325 1326 /** @name: human readable name, can be overwritten by the driver */ 1327 char *name; 1328 1329 /** 1330 * @mutex: Lock for general connector state, but currently only protects 1331 * @registered. Most of the connector state is still protected by 1332 * &drm_mode_config.mutex. 1333 */ 1334 struct mutex mutex; 1335 1336 /** 1337 * @index: Compacted connector index, which matches the position inside 1338 * the mode_config.list for drivers not supporting hot-add/removing. Can 1339 * be used as an array index. It is invariant over the lifetime of the 1340 * connector. 1341 */ 1342 unsigned index; 1343 1344 /** 1345 * @connector_type: 1346 * one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h 1347 */ 1348 int connector_type; 1349 /** @connector_type_id: index into connector type enum */ 1350 int connector_type_id; 1351 /** 1352 * @interlace_allowed: 1353 * Can this connector handle interlaced modes? Only used by 1354 * drm_helper_probe_single_connector_modes() for mode filtering. 1355 */ 1356 bool interlace_allowed; 1357 /** 1358 * @doublescan_allowed: 1359 * Can this connector handle doublescan? Only used by 1360 * drm_helper_probe_single_connector_modes() for mode filtering. 1361 */ 1362 bool doublescan_allowed; 1363 /** 1364 * @stereo_allowed: 1365 * Can this connector handle stereo modes? Only used by 1366 * drm_helper_probe_single_connector_modes() for mode filtering. 1367 */ 1368 bool stereo_allowed; 1369 1370 /** 1371 * @ycbcr_420_allowed : This bool indicates if this connector is 1372 * capable of handling YCBCR 420 output. While parsing the EDID 1373 * blocks it's very helpful to know if the source is capable of 1374 * handling YCBCR 420 outputs. 1375 */ 1376 bool ycbcr_420_allowed; 1377 1378 /** 1379 * @registration_state: Is this connector initializing, exposed 1380 * (registered) with userspace, or unregistered? 1381 * 1382 * Protected by @mutex. 1383 */ 1384 enum drm_connector_registration_state registration_state; 1385 1386 /** 1387 * @modes: 1388 * Modes available on this connector (from fill_modes() + user). 1389 * Protected by &drm_mode_config.mutex. 1390 */ 1391 struct list_head modes; 1392 1393 /** 1394 * @status: 1395 * One of the drm_connector_status enums (connected, not, or unknown). 1396 * Protected by &drm_mode_config.mutex. 1397 */ 1398 enum drm_connector_status status; 1399 1400 /** 1401 * @probed_modes: 1402 * These are modes added by probing with DDC or the BIOS, before 1403 * filtering is applied. Used by the probe helpers. Protected by 1404 * &drm_mode_config.mutex. 1405 */ 1406 struct list_head probed_modes; 1407 1408 /** 1409 * @display_info: Display information is filled from EDID information 1410 * when a display is detected. For non hot-pluggable displays such as 1411 * flat panels in embedded systems, the driver should initialize the 1412 * &drm_display_info.width_mm and &drm_display_info.height_mm fields 1413 * with the physical size of the display. 1414 * 1415 * Protected by &drm_mode_config.mutex. 1416 */ 1417 struct drm_display_info display_info; 1418 1419 /** @funcs: connector control functions */ 1420 const struct drm_connector_funcs *funcs; 1421 1422 /** 1423 * @edid_blob_ptr: DRM property containing EDID if present. Protected by 1424 * &drm_mode_config.mutex. This should be updated only by calling 1425 * drm_connector_update_edid_property(). 1426 */ 1427 struct drm_property_blob *edid_blob_ptr; 1428 1429 /** @properties: property tracking for this connector */ 1430 struct drm_object_properties properties; 1431 1432 /** 1433 * @scaling_mode_property: Optional atomic property to control the 1434 * upscaling. See drm_connector_attach_content_protection_property(). 1435 */ 1436 struct drm_property *scaling_mode_property; 1437 1438 /** 1439 * @vrr_capable_property: Optional property to help userspace 1440 * query hardware support for variable refresh rate on a connector. 1441 * connector. Drivers can add the property to a connector by 1442 * calling drm_connector_attach_vrr_capable_property(). 1443 * 1444 * This should be updated only by calling 1445 * drm_connector_set_vrr_capable_property(). 1446 */ 1447 struct drm_property *vrr_capable_property; 1448 1449 /** 1450 * @colorspace_property: Connector property to set the suitable 1451 * colorspace supported by the sink. 1452 */ 1453 struct drm_property *colorspace_property; 1454 1455 /** 1456 * @path_blob_ptr: 1457 * 1458 * DRM blob property data for the DP MST path property. This should only 1459 * be updated by calling drm_connector_set_path_property(). 1460 */ 1461 struct drm_property_blob *path_blob_ptr; 1462 1463 /** 1464 * @max_bpc_property: Default connector property for the max bpc to be 1465 * driven out of the connector. 1466 */ 1467 struct drm_property *max_bpc_property; 1468 1469 /** @privacy_screen: drm_privacy_screen for this connector, or NULL. */ 1470 struct drm_privacy_screen *privacy_screen; 1471 1472 /** @privacy_screen_notifier: privacy-screen notifier_block */ 1473 struct notifier_block privacy_screen_notifier; 1474 1475 /** 1476 * @privacy_screen_sw_state_property: Optional atomic property for the 1477 * connector to control the integrated privacy screen. 1478 */ 1479 struct drm_property *privacy_screen_sw_state_property; 1480 1481 /** 1482 * @privacy_screen_hw_state_property: Optional atomic property for the 1483 * connector to report the actual integrated privacy screen state. 1484 */ 1485 struct drm_property *privacy_screen_hw_state_property; 1486 1487 #define DRM_CONNECTOR_POLL_HPD (1 << 0) 1488 #define DRM_CONNECTOR_POLL_CONNECT (1 << 1) 1489 #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) 1490 1491 /** 1492 * @polled: 1493 * 1494 * Connector polling mode, a combination of 1495 * 1496 * DRM_CONNECTOR_POLL_HPD 1497 * The connector generates hotplug events and doesn't need to be 1498 * periodically polled. The CONNECT and DISCONNECT flags must not 1499 * be set together with the HPD flag. 1500 * 1501 * DRM_CONNECTOR_POLL_CONNECT 1502 * Periodically poll the connector for connection. 1503 * 1504 * DRM_CONNECTOR_POLL_DISCONNECT 1505 * Periodically poll the connector for disconnection, without 1506 * causing flickering even when the connector is in use. DACs should 1507 * rarely do this without a lot of testing. 1508 * 1509 * Set to 0 for connectors that don't support connection status 1510 * discovery. 1511 */ 1512 uint8_t polled; 1513 1514 /** 1515 * @dpms: Current dpms state. For legacy drivers the 1516 * &drm_connector_funcs.dpms callback must update this. For atomic 1517 * drivers, this is handled by the core atomic code, and drivers must 1518 * only take &drm_crtc_state.active into account. 1519 */ 1520 int dpms; 1521 1522 /** @helper_private: mid-layer private data */ 1523 const struct drm_connector_helper_funcs *helper_private; 1524 1525 /** @cmdline_mode: mode line parsed from the kernel cmdline for this connector */ 1526 struct drm_cmdline_mode cmdline_mode; 1527 /** @force: a DRM_FORCE_<foo> state for forced mode sets */ 1528 enum drm_connector_force force; 1529 /** @override_edid: has the EDID been overwritten through debugfs for testing? */ 1530 bool override_edid; 1531 /** @epoch_counter: used to detect any other changes in connector, besides status */ 1532 u64 epoch_counter; 1533 1534 /** 1535 * @possible_encoders: Bit mask of encoders that can drive this 1536 * connector, drm_encoder_index() determines the index into the bitfield 1537 * and the bits are set with drm_connector_attach_encoder(). 1538 */ 1539 u32 possible_encoders; 1540 1541 /** 1542 * @encoder: Currently bound encoder driving this connector, if any. 1543 * Only really meaningful for non-atomic drivers. Atomic drivers should 1544 * instead look at &drm_connector_state.best_encoder, and in case they 1545 * need the CRTC driving this output, &drm_connector_state.crtc. 1546 */ 1547 struct drm_encoder *encoder; 1548 1549 #define MAX_ELD_BYTES 128 1550 /** @eld: EDID-like data, if present */ 1551 uint8_t eld[MAX_ELD_BYTES]; 1552 /** @latency_present: AV delay info from ELD, if found */ 1553 bool latency_present[2]; 1554 /** 1555 * @video_latency: Video latency info from ELD, if found. 1556 * [0]: progressive, [1]: interlaced 1557 */ 1558 int video_latency[2]; 1559 /** 1560 * @audio_latency: audio latency info from ELD, if found 1561 * [0]: progressive, [1]: interlaced 1562 */ 1563 int audio_latency[2]; 1564 1565 /** 1566 * @ddc: associated ddc adapter. 1567 * A connector usually has its associated ddc adapter. If a driver uses 1568 * this field, then an appropriate symbolic link is created in connector 1569 * sysfs directory to make it easy for the user to tell which i2c 1570 * adapter is for a particular display. 1571 * 1572 * The field should be set by calling drm_connector_init_with_ddc(). 1573 */ 1574 struct i2c_adapter *ddc; 1575 1576 /** 1577 * @null_edid_counter: track sinks that give us all zeros for the EDID. 1578 * Needed to workaround some HW bugs where we get all 0s 1579 */ 1580 int null_edid_counter; 1581 1582 /** @bad_edid_counter: track sinks that give us an EDID with invalid checksum */ 1583 unsigned bad_edid_counter; 1584 1585 /** 1586 * @edid_corrupt: Indicates whether the last read EDID was corrupt. Used 1587 * in Displayport compliance testing - Displayport Link CTS Core 1.2 1588 * rev1.1 4.2.2.6 1589 */ 1590 bool edid_corrupt; 1591 /** 1592 * @real_edid_checksum: real edid checksum for corrupted edid block. 1593 * Required in Displayport 1.4 compliance testing 1594 * rev1.1 4.2.2.6 1595 */ 1596 u8 real_edid_checksum; 1597 1598 /** @debugfs_entry: debugfs directory for this connector */ 1599 struct dentry *debugfs_entry; 1600 1601 /** 1602 * @state: 1603 * 1604 * Current atomic state for this connector. 1605 * 1606 * This is protected by &drm_mode_config.connection_mutex. Note that 1607 * nonblocking atomic commits access the current connector state without 1608 * taking locks. Either by going through the &struct drm_atomic_state 1609 * pointers, see for_each_oldnew_connector_in_state(), 1610 * for_each_old_connector_in_state() and 1611 * for_each_new_connector_in_state(). Or through careful ordering of 1612 * atomic commit operations as implemented in the atomic helpers, see 1613 * &struct drm_crtc_commit. 1614 */ 1615 struct drm_connector_state *state; 1616 1617 /* DisplayID bits. FIXME: Extract into a substruct? */ 1618 1619 /** 1620 * @tile_blob_ptr: 1621 * 1622 * DRM blob property data for the tile property (used mostly by DP MST). 1623 * This is meant for screens which are driven through separate display 1624 * pipelines represented by &drm_crtc, which might not be running with 1625 * genlocked clocks. For tiled panels which are genlocked, like 1626 * dual-link LVDS or dual-link DSI, the driver should try to not expose 1627 * the tiling and virtualize both &drm_crtc and &drm_plane if needed. 1628 * 1629 * This should only be updated by calling 1630 * drm_connector_set_tile_property(). 1631 */ 1632 struct drm_property_blob *tile_blob_ptr; 1633 1634 /** @has_tile: is this connector connected to a tiled monitor */ 1635 bool has_tile; 1636 /** @tile_group: tile group for the connected monitor */ 1637 struct drm_tile_group *tile_group; 1638 /** @tile_is_single_monitor: whether the tile is one monitor housing */ 1639 bool tile_is_single_monitor; 1640 1641 /** @num_h_tile: number of horizontal tiles in the tile group */ 1642 /** @num_v_tile: number of vertical tiles in the tile group */ 1643 uint8_t num_h_tile, num_v_tile; 1644 /** @tile_h_loc: horizontal location of this tile */ 1645 /** @tile_v_loc: vertical location of this tile */ 1646 uint8_t tile_h_loc, tile_v_loc; 1647 /** @tile_h_size: horizontal size of this tile. */ 1648 /** @tile_v_size: vertical size of this tile. */ 1649 uint16_t tile_h_size, tile_v_size; 1650 1651 /** 1652 * @free_node: 1653 * 1654 * List used only by &drm_connector_list_iter to be able to clean up a 1655 * connector from any context, in conjunction with 1656 * &drm_mode_config.connector_free_work. 1657 */ 1658 struct llist_node free_node; 1659 1660 /** @hdr_sink_metadata: HDR Metadata Information read from sink */ 1661 struct hdr_sink_metadata hdr_sink_metadata; 1662 }; 1663 1664 #define obj_to_connector(x) container_of(x, struct drm_connector, base) 1665 1666 int drm_connector_init(struct drm_device *dev, 1667 struct drm_connector *connector, 1668 const struct drm_connector_funcs *funcs, 1669 int connector_type); 1670 int drm_connector_init_with_ddc(struct drm_device *dev, 1671 struct drm_connector *connector, 1672 const struct drm_connector_funcs *funcs, 1673 int connector_type, 1674 struct i2c_adapter *ddc); 1675 void drm_connector_attach_edid_property(struct drm_connector *connector); 1676 int drm_connector_register(struct drm_connector *connector); 1677 void drm_connector_unregister(struct drm_connector *connector); 1678 int drm_connector_attach_encoder(struct drm_connector *connector, 1679 struct drm_encoder *encoder); 1680 1681 void drm_connector_cleanup(struct drm_connector *connector); 1682 1683 static inline unsigned int drm_connector_index(const struct drm_connector *connector) 1684 { 1685 return connector->index; 1686 } 1687 1688 static inline u32 drm_connector_mask(const struct drm_connector *connector) 1689 { 1690 return 1 << connector->index; 1691 } 1692 1693 /** 1694 * drm_connector_lookup - lookup connector object 1695 * @dev: DRM device 1696 * @file_priv: drm file to check for lease against. 1697 * @id: connector object id 1698 * 1699 * This function looks up the connector object specified by id 1700 * add takes a reference to it. 1701 */ 1702 static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev, 1703 struct drm_file *file_priv, 1704 uint32_t id) 1705 { 1706 struct drm_mode_object *mo; 1707 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CONNECTOR); 1708 return mo ? obj_to_connector(mo) : NULL; 1709 } 1710 1711 /** 1712 * drm_connector_get - acquire a connector reference 1713 * @connector: DRM connector 1714 * 1715 * This function increments the connector's refcount. 1716 */ 1717 static inline void drm_connector_get(struct drm_connector *connector) 1718 { 1719 drm_mode_object_get(&connector->base); 1720 } 1721 1722 /** 1723 * drm_connector_put - release a connector reference 1724 * @connector: DRM connector 1725 * 1726 * This function decrements the connector's reference count and frees the 1727 * object if the reference count drops to zero. 1728 */ 1729 static inline void drm_connector_put(struct drm_connector *connector) 1730 { 1731 drm_mode_object_put(&connector->base); 1732 } 1733 1734 /** 1735 * drm_connector_is_unregistered - has the connector been unregistered from 1736 * userspace? 1737 * @connector: DRM connector 1738 * 1739 * Checks whether or not @connector has been unregistered from userspace. 1740 * 1741 * Returns: 1742 * True if the connector was unregistered, false if the connector is 1743 * registered or has not yet been registered with userspace. 1744 */ 1745 static inline bool 1746 drm_connector_is_unregistered(struct drm_connector *connector) 1747 { 1748 return READ_ONCE(connector->registration_state) == 1749 DRM_CONNECTOR_UNREGISTERED; 1750 } 1751 1752 void drm_connector_oob_hotplug_event(struct fwnode_handle *connector_fwnode); 1753 const char *drm_get_connector_type_name(unsigned int connector_type); 1754 const char *drm_get_connector_status_name(enum drm_connector_status status); 1755 const char *drm_get_subpixel_order_name(enum subpixel_order order); 1756 const char *drm_get_dpms_name(int val); 1757 const char *drm_get_dvi_i_subconnector_name(int val); 1758 const char *drm_get_dvi_i_select_name(int val); 1759 const char *drm_get_tv_subconnector_name(int val); 1760 const char *drm_get_tv_select_name(int val); 1761 const char *drm_get_dp_subconnector_name(int val); 1762 const char *drm_get_content_protection_name(int val); 1763 const char *drm_get_hdcp_content_type_name(int val); 1764 1765 int drm_mode_create_dvi_i_properties(struct drm_device *dev); 1766 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector); 1767 1768 int drm_mode_create_tv_margin_properties(struct drm_device *dev); 1769 int drm_mode_create_tv_properties(struct drm_device *dev, 1770 unsigned int num_modes, 1771 const char * const modes[]); 1772 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn); 1773 int drm_mode_create_scaling_mode_property(struct drm_device *dev); 1774 int drm_connector_attach_content_type_property(struct drm_connector *dev); 1775 int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, 1776 u32 scaling_mode_mask); 1777 int drm_connector_attach_vrr_capable_property( 1778 struct drm_connector *connector); 1779 int drm_connector_attach_colorspace_property(struct drm_connector *connector); 1780 int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *connector); 1781 bool drm_connector_atomic_hdr_metadata_equal(struct drm_connector_state *old_state, 1782 struct drm_connector_state *new_state); 1783 int drm_mode_create_aspect_ratio_property(struct drm_device *dev); 1784 int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector); 1785 int drm_mode_create_dp_colorspace_property(struct drm_connector *connector); 1786 int drm_mode_create_content_type_property(struct drm_device *dev); 1787 void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, 1788 const struct drm_connector_state *conn_state); 1789 1790 int drm_mode_create_suggested_offset_properties(struct drm_device *dev); 1791 1792 int drm_connector_set_path_property(struct drm_connector *connector, 1793 const char *path); 1794 int drm_connector_set_tile_property(struct drm_connector *connector); 1795 int drm_connector_update_edid_property(struct drm_connector *connector, 1796 const struct edid *edid); 1797 void drm_connector_set_link_status_property(struct drm_connector *connector, 1798 uint64_t link_status); 1799 void drm_connector_set_vrr_capable_property( 1800 struct drm_connector *connector, bool capable); 1801 int drm_connector_set_panel_orientation( 1802 struct drm_connector *connector, 1803 enum drm_panel_orientation panel_orientation); 1804 int drm_connector_set_panel_orientation_with_quirk( 1805 struct drm_connector *connector, 1806 enum drm_panel_orientation panel_orientation, 1807 int width, int height); 1808 int drm_connector_attach_max_bpc_property(struct drm_connector *connector, 1809 int min, int max); 1810 void drm_connector_create_privacy_screen_properties(struct drm_connector *conn); 1811 void drm_connector_attach_privacy_screen_properties(struct drm_connector *conn); 1812 void drm_connector_attach_privacy_screen_provider( 1813 struct drm_connector *connector, struct drm_privacy_screen *priv); 1814 void drm_connector_update_privacy_screen(const struct drm_connector_state *connector_state); 1815 1816 /** 1817 * struct drm_tile_group - Tile group metadata 1818 * @refcount: reference count 1819 * @dev: DRM device 1820 * @id: tile group id exposed to userspace 1821 * @group_data: Sink-private data identifying this group 1822 * 1823 * @group_data corresponds to displayid vend/prod/serial for external screens 1824 * with an EDID. 1825 */ 1826 struct drm_tile_group { 1827 struct kref refcount; 1828 struct drm_device *dev; 1829 int id; 1830 u8 group_data[8]; 1831 }; 1832 1833 struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, 1834 const char topology[8]); 1835 struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, 1836 const char topology[8]); 1837 void drm_mode_put_tile_group(struct drm_device *dev, 1838 struct drm_tile_group *tg); 1839 1840 /** 1841 * struct drm_connector_list_iter - connector_list iterator 1842 * 1843 * This iterator tracks state needed to be able to walk the connector_list 1844 * within struct drm_mode_config. Only use together with 1845 * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and 1846 * drm_connector_list_iter_next() respectively the convenience macro 1847 * drm_for_each_connector_iter(). 1848 * 1849 * Note that the return value of drm_connector_list_iter_next() is only valid 1850 * up to the next drm_connector_list_iter_next() or 1851 * drm_connector_list_iter_end() call. If you want to use the connector later, 1852 * then you need to grab your own reference first using drm_connector_get(). 1853 */ 1854 struct drm_connector_list_iter { 1855 /* private: */ 1856 struct drm_device *dev; 1857 struct drm_connector *conn; 1858 }; 1859 1860 void drm_connector_list_iter_begin(struct drm_device *dev, 1861 struct drm_connector_list_iter *iter); 1862 struct drm_connector * 1863 drm_connector_list_iter_next(struct drm_connector_list_iter *iter); 1864 void drm_connector_list_iter_end(struct drm_connector_list_iter *iter); 1865 1866 bool drm_connector_has_possible_encoder(struct drm_connector *connector, 1867 struct drm_encoder *encoder); 1868 1869 /** 1870 * drm_for_each_connector_iter - connector_list iterator macro 1871 * @connector: &struct drm_connector pointer used as cursor 1872 * @iter: &struct drm_connector_list_iter 1873 * 1874 * Note that @connector is only valid within the list body, if you want to use 1875 * @connector after calling drm_connector_list_iter_end() then you need to grab 1876 * your own reference first using drm_connector_get(). 1877 */ 1878 #define drm_for_each_connector_iter(connector, iter) \ 1879 while ((connector = drm_connector_list_iter_next(iter))) 1880 1881 /** 1882 * drm_connector_for_each_possible_encoder - iterate connector's possible encoders 1883 * @connector: &struct drm_connector pointer 1884 * @encoder: &struct drm_encoder pointer used as cursor 1885 */ 1886 #define drm_connector_for_each_possible_encoder(connector, encoder) \ 1887 drm_for_each_encoder_mask(encoder, (connector)->dev, \ 1888 (connector)->possible_encoders) 1889 1890 #endif 1891