1 /* 2 * Copyright (c) 2016 Intel Corporation 3 * 4 * Permission to use, copy, modify, distribute, and sell this software and its 5 * documentation for any purpose is hereby granted without fee, provided that 6 * the above copyright notice appear in all copies and that both that copyright 7 * notice and this permission notice appear in supporting documentation, and 8 * that the name of the copyright holders not be used in advertising or 9 * publicity pertaining to distribution of the software without specific, 10 * written prior permission. The copyright holders make no representations 11 * about the suitability of this software for any purpose. It is provided "as 12 * is" without express or implied warranty. 13 * 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 20 * OF THIS SOFTWARE. 21 */ 22 23 #ifndef __DRM_CONNECTOR_H__ 24 #define __DRM_CONNECTOR_H__ 25 26 #include <linux/list.h> 27 #include <linux/llist.h> 28 #include <linux/ctype.h> 29 #include <linux/hdmi.h> 30 #include <drm/drm_mode_object.h> 31 #include <drm/drm_util.h> 32 33 #include <uapi/drm/drm_mode.h> 34 35 struct drm_connector_helper_funcs; 36 struct drm_modeset_acquire_ctx; 37 struct drm_device; 38 struct drm_crtc; 39 struct drm_encoder; 40 struct drm_property; 41 struct drm_property_blob; 42 struct drm_printer; 43 struct edid; 44 struct i2c_adapter; 45 46 enum drm_connector_force { 47 DRM_FORCE_UNSPECIFIED, 48 DRM_FORCE_OFF, 49 DRM_FORCE_ON, /* force on analog part normally */ 50 DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ 51 }; 52 53 /** 54 * enum drm_connector_status - status for a &drm_connector 55 * 56 * This enum is used to track the connector status. There are no separate 57 * #defines for the uapi! 58 */ 59 enum drm_connector_status { 60 /** 61 * @connector_status_connected: The connector is definitely connected to 62 * a sink device, and can be enabled. 63 */ 64 connector_status_connected = 1, 65 /** 66 * @connector_status_disconnected: The connector isn't connected to a 67 * sink device which can be autodetect. For digital outputs like DP or 68 * HDMI (which can be realiable probed) this means there's really 69 * nothing there. It is driver-dependent whether a connector with this 70 * status can be lit up or not. 71 */ 72 connector_status_disconnected = 2, 73 /** 74 * @connector_status_unknown: The connector's status could not be 75 * reliably detected. This happens when probing would either cause 76 * flicker (like load-detection when the connector is in use), or when a 77 * hardware resource isn't available (like when load-detection needs a 78 * free CRTC). It should be possible to light up the connector with one 79 * of the listed fallback modes. For default configuration userspace 80 * should only try to light up connectors with unknown status when 81 * there's not connector with @connector_status_connected. 82 */ 83 connector_status_unknown = 3, 84 }; 85 86 /** 87 * enum drm_connector_registration_status - userspace registration status for 88 * a &drm_connector 89 * 90 * This enum is used to track the status of initializing a connector and 91 * registering it with userspace, so that DRM can prevent bogus modesets on 92 * connectors that no longer exist. 93 */ 94 enum drm_connector_registration_state { 95 /** 96 * @DRM_CONNECTOR_INITIALIZING: The connector has just been created, 97 * but has yet to be exposed to userspace. There should be no 98 * additional restrictions to how the state of this connector may be 99 * modified. 100 */ 101 DRM_CONNECTOR_INITIALIZING = 0, 102 103 /** 104 * @DRM_CONNECTOR_REGISTERED: The connector has been fully initialized 105 * and registered with sysfs, as such it has been exposed to 106 * userspace. There should be no additional restrictions to how the 107 * state of this connector may be modified. 108 */ 109 DRM_CONNECTOR_REGISTERED = 1, 110 111 /** 112 * @DRM_CONNECTOR_UNREGISTERED: The connector has either been exposed 113 * to userspace and has since been unregistered and removed from 114 * userspace, or the connector was unregistered before it had a chance 115 * to be exposed to userspace (e.g. still in the 116 * @DRM_CONNECTOR_INITIALIZING state). When a connector is 117 * unregistered, there are additional restrictions to how its state 118 * may be modified: 119 * 120 * - An unregistered connector may only have its DPMS changed from 121 * On->Off. Once DPMS is changed to Off, it may not be switched back 122 * to On. 123 * - Modesets are not allowed on unregistered connectors, unless they 124 * would result in disabling its assigned CRTCs. This means 125 * disabling a CRTC on an unregistered connector is OK, but enabling 126 * one is not. 127 * - Removing a CRTC from an unregistered connector is OK, but new 128 * CRTCs may never be assigned to an unregistered connector. 129 */ 130 DRM_CONNECTOR_UNREGISTERED = 2, 131 }; 132 133 enum subpixel_order { 134 SubPixelUnknown = 0, 135 SubPixelHorizontalRGB, 136 SubPixelHorizontalBGR, 137 SubPixelVerticalRGB, 138 SubPixelVerticalBGR, 139 SubPixelNone, 140 141 }; 142 143 /** 144 * struct drm_scrambling: sink's scrambling support. 145 */ 146 struct drm_scrambling { 147 /** 148 * @supported: scrambling supported for rates > 340 Mhz. 149 */ 150 bool supported; 151 /** 152 * @low_rates: scrambling supported for rates <= 340 Mhz. 153 */ 154 bool low_rates; 155 }; 156 157 /* 158 * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink 159 * 160 * Provides SCDC register support and capabilities related information on a 161 * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0. 162 */ 163 struct drm_scdc { 164 /** 165 * @supported: status control & data channel present. 166 */ 167 bool supported; 168 /** 169 * @read_request: sink is capable of generating scdc read request. 170 */ 171 bool read_request; 172 /** 173 * @scrambling: sink's scrambling capabilities 174 */ 175 struct drm_scrambling scrambling; 176 }; 177 178 179 /** 180 * struct drm_hdmi_info - runtime information about the connected HDMI sink 181 * 182 * Describes if a given display supports advanced HDMI 2.0 features. 183 * This information is available in CEA-861-F extension blocks (like HF-VSDB). 184 */ 185 struct drm_hdmi_info { 186 /** @scdc: sink's scdc support and capabilities */ 187 struct drm_scdc scdc; 188 189 /** 190 * @y420_vdb_modes: bitmap of modes which can support ycbcr420 191 * output only (not normal RGB/YCBCR444/422 outputs). There are total 192 * 107 VICs defined by CEA-861-F spec, so the size is 128 bits to map 193 * upto 128 VICs; 194 */ 195 unsigned long y420_vdb_modes[BITS_TO_LONGS(128)]; 196 197 /** 198 * @y420_cmdb_modes: bitmap of modes which can support ycbcr420 199 * output also, along with normal HDMI outputs. There are total 107 200 * VICs defined by CEA-861-F spec, so the size is 128 bits to map upto 201 * 128 VICs; 202 */ 203 unsigned long y420_cmdb_modes[BITS_TO_LONGS(128)]; 204 205 /** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */ 206 u64 y420_cmdb_map; 207 208 /** @y420_dc_modes: bitmap of deep color support index */ 209 u8 y420_dc_modes; 210 }; 211 212 /** 213 * enum drm_link_status - connector's link_status property value 214 * 215 * This enum is used as the connector's link status property value. 216 * It is set to the values defined in uapi. 217 * 218 * @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful 219 * link training 220 * @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training 221 * failure 222 */ 223 enum drm_link_status { 224 DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD, 225 DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD, 226 }; 227 228 /** 229 * enum drm_panel_orientation - panel_orientation info for &drm_display_info 230 * 231 * This enum is used to track the (LCD) panel orientation. There are no 232 * separate #defines for the uapi! 233 * 234 * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any 235 * panel orientation information (normal 236 * for non panels) in this case the "panel 237 * orientation" connector prop will not be 238 * attached. 239 * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the 240 * top side of the device's casing. 241 * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the 242 * bottom side of the device's casing, iow 243 * the panel is mounted upside-down. 244 * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the 245 * top side of the device's casing. 246 * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the 247 * top side of the device's casing. 248 */ 249 enum drm_panel_orientation { 250 DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1, 251 DRM_MODE_PANEL_ORIENTATION_NORMAL = 0, 252 DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, 253 DRM_MODE_PANEL_ORIENTATION_LEFT_UP, 254 DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, 255 }; 256 257 /* 258 * This is a consolidated colorimetry list supported by HDMI and 259 * DP protocol standard. The respective connectors will register 260 * a property with the subset of this list (supported by that 261 * respective protocol). Userspace will set the colorspace through 262 * a colorspace property which will be created and exposed to 263 * userspace. 264 */ 265 266 /* For Default case, driver will set the colorspace */ 267 #define DRM_MODE_COLORIMETRY_DEFAULT 0 268 /* CEA 861 Normal Colorimetry options */ 269 #define DRM_MODE_COLORIMETRY_NO_DATA 0 270 #define DRM_MODE_COLORIMETRY_SMPTE_170M_YCC 1 271 #define DRM_MODE_COLORIMETRY_BT709_YCC 2 272 /* CEA 861 Extended Colorimetry Options */ 273 #define DRM_MODE_COLORIMETRY_XVYCC_601 3 274 #define DRM_MODE_COLORIMETRY_XVYCC_709 4 275 #define DRM_MODE_COLORIMETRY_SYCC_601 5 276 #define DRM_MODE_COLORIMETRY_OPYCC_601 6 277 #define DRM_MODE_COLORIMETRY_OPRGB 7 278 #define DRM_MODE_COLORIMETRY_BT2020_CYCC 8 279 #define DRM_MODE_COLORIMETRY_BT2020_RGB 9 280 #define DRM_MODE_COLORIMETRY_BT2020_YCC 10 281 /* Additional Colorimetry extension added as part of CTA 861.G */ 282 #define DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65 11 283 #define DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER 12 284 /* Additional Colorimetry Options added for DP 1.4a VSC Colorimetry Format */ 285 #define DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED 13 286 #define DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT 14 287 #define DRM_MODE_COLORIMETRY_BT601_YCC 15 288 289 /** 290 * enum drm_bus_flags - bus_flags info for &drm_display_info 291 * 292 * This enum defines signal polarities and clock edge information for signals on 293 * a bus as bitmask flags. 294 * 295 * The clock edge information is conveyed by two sets of symbols, 296 * DRM_BUS_FLAGS_*_DRIVE_\* and DRM_BUS_FLAGS_*_SAMPLE_\*. When this enum is 297 * used to describe a bus from the point of view of the transmitter, the 298 * \*_DRIVE_\* flags should be used. When used from the point of view of the 299 * receiver, the \*_SAMPLE_\* flags should be used. The \*_DRIVE_\* and 300 * \*_SAMPLE_\* flags alias each other, with the \*_SAMPLE_POSEDGE and 301 * \*_SAMPLE_NEGEDGE flags being equal to \*_DRIVE_NEGEDGE and \*_DRIVE_POSEDGE 302 * respectively. This simplifies code as signals are usually sampled on the 303 * opposite edge of the driving edge. Transmitters and receivers may however 304 * need to take other signal timings into account to convert between driving 305 * and sample edges. 306 * 307 * @DRM_BUS_FLAG_DE_LOW: The Data Enable signal is active low 308 * @DRM_BUS_FLAG_DE_HIGH: The Data Enable signal is active high 309 * @DRM_BUS_FLAG_PIXDATA_POSEDGE: Legacy value, do not use 310 * @DRM_BUS_FLAG_PIXDATA_NEGEDGE: Legacy value, do not use 311 * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: Data is driven on the rising edge of 312 * the pixel clock 313 * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: Data is driven on the falling edge of 314 * the pixel clock 315 * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE: Data is sampled on the rising edge of 316 * the pixel clock 317 * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE: Data is sampled on the falling edge of 318 * the pixel clock 319 * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: Data is transmitted MSB to LSB on the bus 320 * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: Data is transmitted LSB to MSB on the bus 321 * @DRM_BUS_FLAG_SYNC_POSEDGE: Legacy value, do not use 322 * @DRM_BUS_FLAG_SYNC_NEGEDGE: Legacy value, do not use 323 * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: Sync signals are driven on the rising 324 * edge of the pixel clock 325 * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: Sync signals are driven on the falling 326 * edge of the pixel clock 327 * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE: Sync signals are sampled on the rising 328 * edge of the pixel clock 329 * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE: Sync signals are sampled on the falling 330 * edge of the pixel clock 331 * @DRM_BUS_FLAG_SHARP_SIGNALS: Set if the Sharp-specific signals 332 * (SPL, CLS, PS, REV) must be used 333 */ 334 enum drm_bus_flags { 335 DRM_BUS_FLAG_DE_LOW = BIT(0), 336 DRM_BUS_FLAG_DE_HIGH = BIT(1), 337 DRM_BUS_FLAG_PIXDATA_POSEDGE = BIT(2), 338 DRM_BUS_FLAG_PIXDATA_NEGEDGE = BIT(3), 339 DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE, 340 DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE, 341 DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE, 342 DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE, 343 DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4), 344 DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5), 345 DRM_BUS_FLAG_SYNC_POSEDGE = BIT(6), 346 DRM_BUS_FLAG_SYNC_NEGEDGE = BIT(7), 347 DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = DRM_BUS_FLAG_SYNC_POSEDGE, 348 DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = DRM_BUS_FLAG_SYNC_NEGEDGE, 349 DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_NEGEDGE, 350 DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_POSEDGE, 351 DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8), 352 }; 353 354 /** 355 * struct drm_display_info - runtime data about the connected sink 356 * 357 * Describes a given display (e.g. CRT or flat panel) and its limitations. For 358 * fixed display sinks like built-in panels there's not much difference between 359 * this and &struct drm_connector. But for sinks with a real cable this 360 * structure is meant to describe all the things at the other end of the cable. 361 * 362 * For sinks which provide an EDID this can be filled out by calling 363 * drm_add_edid_modes(). 364 */ 365 struct drm_display_info { 366 /** 367 * @width_mm: Physical width in mm. 368 */ 369 unsigned int width_mm; 370 371 /** 372 * @height_mm: Physical height in mm. 373 */ 374 unsigned int height_mm; 375 376 /** 377 * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs. 378 */ 379 unsigned int bpc; 380 381 /** 382 * @subpixel_order: Subpixel order of LCD panels. 383 */ 384 enum subpixel_order subpixel_order; 385 386 #define DRM_COLOR_FORMAT_RGB444 (1<<0) 387 #define DRM_COLOR_FORMAT_YCRCB444 (1<<1) 388 #define DRM_COLOR_FORMAT_YCRCB422 (1<<2) 389 #define DRM_COLOR_FORMAT_YCRCB420 (1<<3) 390 391 /** 392 * @panel_orientation: Read only connector property for built-in panels, 393 * indicating the orientation of the panel vs the device's casing. 394 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. 395 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the 396 * fb to compensate and gets exported as prop to userspace. 397 */ 398 int panel_orientation; 399 400 /** 401 * @color_formats: HDMI Color formats, selects between RGB and YCrCb 402 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones 403 * as used to describe the pixel format in framebuffers, and also don't 404 * match the formats in @bus_formats which are shared with v4l. 405 */ 406 u32 color_formats; 407 408 /** 409 * @bus_formats: Pixel data format on the wire, somewhat redundant with 410 * @color_formats. Array of size @num_bus_formats encoded using 411 * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers. 412 */ 413 const u32 *bus_formats; 414 /** 415 * @num_bus_formats: Size of @bus_formats array. 416 */ 417 unsigned int num_bus_formats; 418 419 /** 420 * @bus_flags: Additional information (like pixel signal polarity) for 421 * the pixel data on the bus, using &enum drm_bus_flags values 422 * DRM_BUS_FLAGS\_. 423 */ 424 u32 bus_flags; 425 426 /** 427 * @max_tmds_clock: Maximum TMDS clock rate supported by the 428 * sink in kHz. 0 means undefined. 429 */ 430 int max_tmds_clock; 431 432 /** 433 * @dvi_dual: Dual-link DVI sink? 434 */ 435 bool dvi_dual; 436 437 /** 438 * @has_hdmi_infoframe: Does the sink support the HDMI infoframe? 439 */ 440 bool has_hdmi_infoframe; 441 442 /** 443 * @rgb_quant_range_selectable: Does the sink support selecting 444 * the RGB quantization range? 445 */ 446 bool rgb_quant_range_selectable; 447 448 /** 449 * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even 450 * more stuff redundant with @bus_formats. 451 */ 452 u8 edid_hdmi_dc_modes; 453 454 /** 455 * @cea_rev: CEA revision of the HDMI sink. 456 */ 457 u8 cea_rev; 458 459 /** 460 * @hdmi: advance features of a HDMI sink. 461 */ 462 struct drm_hdmi_info hdmi; 463 464 /** 465 * @non_desktop: Non desktop display (HMD). 466 */ 467 bool non_desktop; 468 }; 469 470 int drm_display_info_set_bus_formats(struct drm_display_info *info, 471 const u32 *formats, 472 unsigned int num_formats); 473 474 /** 475 * struct drm_connector_tv_margins - TV connector related margins 476 * 477 * Describes the margins in pixels to put around the image on TV 478 * connectors to deal with overscan. 479 */ 480 struct drm_connector_tv_margins { 481 /** 482 * @bottom: Bottom margin in pixels. 483 */ 484 unsigned int bottom; 485 486 /** 487 * @left: Left margin in pixels. 488 */ 489 unsigned int left; 490 491 /** 492 * @right: Right margin in pixels. 493 */ 494 unsigned int right; 495 496 /** 497 * @top: Top margin in pixels. 498 */ 499 unsigned int top; 500 }; 501 502 /** 503 * struct drm_tv_connector_state - TV connector related states 504 * @subconnector: selected subconnector 505 * @margins: TV margins 506 * @mode: TV mode 507 * @brightness: brightness in percent 508 * @contrast: contrast in percent 509 * @flicker_reduction: flicker reduction in percent 510 * @overscan: overscan in percent 511 * @saturation: saturation in percent 512 * @hue: hue in percent 513 */ 514 struct drm_tv_connector_state { 515 enum drm_mode_subconnector subconnector; 516 struct drm_connector_tv_margins margins; 517 unsigned int mode; 518 unsigned int brightness; 519 unsigned int contrast; 520 unsigned int flicker_reduction; 521 unsigned int overscan; 522 unsigned int saturation; 523 unsigned int hue; 524 }; 525 526 /** 527 * struct drm_connector_state - mutable connector state 528 */ 529 struct drm_connector_state { 530 /** @connector: backpointer to the connector */ 531 struct drm_connector *connector; 532 533 /** 534 * @crtc: CRTC to connect connector to, NULL if disabled. 535 * 536 * Do not change this directly, use drm_atomic_set_crtc_for_connector() 537 * instead. 538 */ 539 struct drm_crtc *crtc; 540 541 /** 542 * @best_encoder: 543 * 544 * Used by the atomic helpers to select the encoder, through the 545 * &drm_connector_helper_funcs.atomic_best_encoder or 546 * &drm_connector_helper_funcs.best_encoder callbacks. 547 * 548 * This is also used in the atomic helpers to map encoders to their 549 * current and previous connectors, see 550 * drm_atomic_get_old_connector_for_encoder() and 551 * drm_atomic_get_new_connector_for_encoder(). 552 * 553 * NOTE: Atomic drivers must fill this out (either themselves or through 554 * helpers), for otherwise the GETCONNECTOR and GETENCODER IOCTLs will 555 * not return correct data to userspace. 556 */ 557 struct drm_encoder *best_encoder; 558 559 /** 560 * @link_status: Connector link_status to keep track of whether link is 561 * GOOD or BAD to notify userspace if retraining is necessary. 562 */ 563 enum drm_link_status link_status; 564 565 /** @state: backpointer to global drm_atomic_state */ 566 struct drm_atomic_state *state; 567 568 /** 569 * @commit: Tracks the pending commit to prevent use-after-free conditions. 570 * 571 * Is only set when @crtc is NULL. 572 */ 573 struct drm_crtc_commit *commit; 574 575 /** @tv: TV connector state */ 576 struct drm_tv_connector_state tv; 577 578 /** 579 * @self_refresh_aware: 580 * 581 * This tracks whether a connector is aware of the self refresh state. 582 * It should be set to true for those connector implementations which 583 * understand the self refresh state. This is needed since the crtc 584 * registers the self refresh helpers and it doesn't know if the 585 * connectors downstream have implemented self refresh entry/exit. 586 * 587 * Drivers should set this to true in atomic_check if they know how to 588 * handle self_refresh requests. 589 */ 590 bool self_refresh_aware; 591 592 /** 593 * @picture_aspect_ratio: Connector property to control the 594 * HDMI infoframe aspect ratio setting. 595 * 596 * The %DRM_MODE_PICTURE_ASPECT_\* values much match the 597 * values for &enum hdmi_picture_aspect 598 */ 599 enum hdmi_picture_aspect picture_aspect_ratio; 600 601 /** 602 * @content_type: Connector property to control the 603 * HDMI infoframe content type setting. 604 * The %DRM_MODE_CONTENT_TYPE_\* values much 605 * match the values. 606 */ 607 unsigned int content_type; 608 609 /** 610 * @hdcp_content_type: Connector property to pass the type of 611 * protected content. This is most commonly used for HDCP. 612 */ 613 unsigned int hdcp_content_type; 614 615 /** 616 * @scaling_mode: Connector property to control the 617 * upscaling, mostly used for built-in panels. 618 */ 619 unsigned int scaling_mode; 620 621 /** 622 * @content_protection: Connector property to request content 623 * protection. This is most commonly used for HDCP. 624 */ 625 unsigned int content_protection; 626 627 /** 628 * @colorspace: State variable for Connector property to request 629 * colorspace change on Sink. This is most commonly used to switch 630 * to wider color gamuts like BT2020. 631 */ 632 u32 colorspace; 633 634 /** 635 * @writeback_job: Writeback job for writeback connectors 636 * 637 * Holds the framebuffer and out-fence for a writeback connector. As 638 * the writeback completion may be asynchronous to the normal commit 639 * cycle, the writeback job lifetime is managed separately from the 640 * normal atomic state by this object. 641 * 642 * See also: drm_writeback_queue_job() and 643 * drm_writeback_signal_completion() 644 */ 645 struct drm_writeback_job *writeback_job; 646 647 /** 648 * @max_requested_bpc: Connector property to limit the maximum bit 649 * depth of the pixels. 650 */ 651 u8 max_requested_bpc; 652 653 /** 654 * @max_bpc: Connector max_bpc based on the requested max_bpc property 655 * and the connector bpc limitations obtained from edid. 656 */ 657 u8 max_bpc; 658 659 /** 660 * @hdr_output_metadata: 661 * DRM blob property for HDR output metadata 662 */ 663 struct drm_property_blob *hdr_output_metadata; 664 }; 665 666 /** 667 * struct drm_connector_funcs - control connectors on a given device 668 * 669 * Each CRTC may have one or more connectors attached to it. The functions 670 * below allow the core DRM code to control connectors, enumerate available modes, 671 * etc. 672 */ 673 struct drm_connector_funcs { 674 /** 675 * @dpms: 676 * 677 * Legacy entry point to set the per-connector DPMS state. Legacy DPMS 678 * is exposed as a standard property on the connector, but diverted to 679 * this callback in the drm core. Note that atomic drivers don't 680 * implement the 4 level DPMS support on the connector any more, but 681 * instead only have an on/off "ACTIVE" property on the CRTC object. 682 * 683 * This hook is not used by atomic drivers, remapping of the legacy DPMS 684 * property is entirely handled in the DRM core. 685 * 686 * RETURNS: 687 * 688 * 0 on success or a negative error code on failure. 689 */ 690 int (*dpms)(struct drm_connector *connector, int mode); 691 692 /** 693 * @reset: 694 * 695 * Reset connector hardware and software state to off. This function isn't 696 * called by the core directly, only through drm_mode_config_reset(). 697 * It's not a helper hook only for historical reasons. 698 * 699 * Atomic drivers can use drm_atomic_helper_connector_reset() to reset 700 * atomic state using this hook. 701 */ 702 void (*reset)(struct drm_connector *connector); 703 704 /** 705 * @detect: 706 * 707 * Check to see if anything is attached to the connector. The parameter 708 * force is set to false whilst polling, true when checking the 709 * connector due to a user request. force can be used by the driver to 710 * avoid expensive, destructive operations during automated probing. 711 * 712 * This callback is optional, if not implemented the connector will be 713 * considered as always being attached. 714 * 715 * FIXME: 716 * 717 * Note that this hook is only called by the probe helper. It's not in 718 * the helper library vtable purely for historical reasons. The only DRM 719 * core entry point to probe connector state is @fill_modes. 720 * 721 * Note that the helper library will already hold 722 * &drm_mode_config.connection_mutex. Drivers which need to grab additional 723 * locks to avoid races with concurrent modeset changes need to use 724 * &drm_connector_helper_funcs.detect_ctx instead. 725 * 726 * RETURNS: 727 * 728 * drm_connector_status indicating the connector's status. 729 */ 730 enum drm_connector_status (*detect)(struct drm_connector *connector, 731 bool force); 732 733 /** 734 * @force: 735 * 736 * This function is called to update internal encoder state when the 737 * connector is forced to a certain state by userspace, either through 738 * the sysfs interfaces or on the kernel cmdline. In that case the 739 * @detect callback isn't called. 740 * 741 * FIXME: 742 * 743 * Note that this hook is only called by the probe helper. It's not in 744 * the helper library vtable purely for historical reasons. The only DRM 745 * core entry point to probe connector state is @fill_modes. 746 */ 747 void (*force)(struct drm_connector *connector); 748 749 /** 750 * @fill_modes: 751 * 752 * Entry point for output detection and basic mode validation. The 753 * driver should reprobe the output if needed (e.g. when hotplug 754 * handling is unreliable), add all detected modes to &drm_connector.modes 755 * and filter out any the device can't support in any configuration. It 756 * also needs to filter out any modes wider or higher than the 757 * parameters max_width and max_height indicate. 758 * 759 * The drivers must also prune any modes no longer valid from 760 * &drm_connector.modes. Furthermore it must update 761 * &drm_connector.status and &drm_connector.edid. If no EDID has been 762 * received for this output connector->edid must be NULL. 763 * 764 * Drivers using the probe helpers should use 765 * drm_helper_probe_single_connector_modes() to implement this 766 * function. 767 * 768 * RETURNS: 769 * 770 * The number of modes detected and filled into &drm_connector.modes. 771 */ 772 int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); 773 774 /** 775 * @set_property: 776 * 777 * This is the legacy entry point to update a property attached to the 778 * connector. 779 * 780 * This callback is optional if the driver does not support any legacy 781 * driver-private properties. For atomic drivers it is not used because 782 * property handling is done entirely in the DRM core. 783 * 784 * RETURNS: 785 * 786 * 0 on success or a negative error code on failure. 787 */ 788 int (*set_property)(struct drm_connector *connector, struct drm_property *property, 789 uint64_t val); 790 791 /** 792 * @late_register: 793 * 794 * This optional hook can be used to register additional userspace 795 * interfaces attached to the connector, light backlight control, i2c, 796 * DP aux or similar interfaces. It is called late in the driver load 797 * sequence from drm_connector_register() when registering all the 798 * core drm connector interfaces. Everything added from this callback 799 * should be unregistered in the early_unregister callback. 800 * 801 * This is called while holding &drm_connector.mutex. 802 * 803 * Returns: 804 * 805 * 0 on success, or a negative error code on failure. 806 */ 807 int (*late_register)(struct drm_connector *connector); 808 809 /** 810 * @early_unregister: 811 * 812 * This optional hook should be used to unregister the additional 813 * userspace interfaces attached to the connector from 814 * late_register(). It is called from drm_connector_unregister(), 815 * early in the driver unload sequence to disable userspace access 816 * before data structures are torndown. 817 * 818 * This is called while holding &drm_connector.mutex. 819 */ 820 void (*early_unregister)(struct drm_connector *connector); 821 822 /** 823 * @destroy: 824 * 825 * Clean up connector resources. This is called at driver unload time 826 * through drm_mode_config_cleanup(). It can also be called at runtime 827 * when a connector is being hot-unplugged for drivers that support 828 * connector hotplugging (e.g. DisplayPort MST). 829 */ 830 void (*destroy)(struct drm_connector *connector); 831 832 /** 833 * @atomic_duplicate_state: 834 * 835 * Duplicate the current atomic state for this connector and return it. 836 * The core and helpers guarantee that any atomic state duplicated with 837 * this hook and still owned by the caller (i.e. not transferred to the 838 * driver by calling &drm_mode_config_funcs.atomic_commit) will be 839 * cleaned up by calling the @atomic_destroy_state hook in this 840 * structure. 841 * 842 * This callback is mandatory for atomic drivers. 843 * 844 * Atomic drivers which don't subclass &struct drm_connector_state should use 845 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the 846 * state structure to extend it with driver-private state should use 847 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is 848 * duplicated in a consistent fashion across drivers. 849 * 850 * It is an error to call this hook before &drm_connector.state has been 851 * initialized correctly. 852 * 853 * NOTE: 854 * 855 * If the duplicate state references refcounted resources this hook must 856 * acquire a reference for each of them. The driver must release these 857 * references again in @atomic_destroy_state. 858 * 859 * RETURNS: 860 * 861 * Duplicated atomic state or NULL when the allocation failed. 862 */ 863 struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); 864 865 /** 866 * @atomic_destroy_state: 867 * 868 * Destroy a state duplicated with @atomic_duplicate_state and release 869 * or unreference all resources it references 870 * 871 * This callback is mandatory for atomic drivers. 872 */ 873 void (*atomic_destroy_state)(struct drm_connector *connector, 874 struct drm_connector_state *state); 875 876 /** 877 * @atomic_set_property: 878 * 879 * Decode a driver-private property value and store the decoded value 880 * into the passed-in state structure. Since the atomic core decodes all 881 * standardized properties (even for extensions beyond the core set of 882 * properties which might not be implemented by all drivers) this 883 * requires drivers to subclass the state structure. 884 * 885 * Such driver-private properties should really only be implemented for 886 * truly hardware/vendor specific state. Instead it is preferred to 887 * standardize atomic extension and decode the properties used to expose 888 * such an extension in the core. 889 * 890 * Do not call this function directly, use 891 * drm_atomic_connector_set_property() instead. 892 * 893 * This callback is optional if the driver does not support any 894 * driver-private atomic properties. 895 * 896 * NOTE: 897 * 898 * This function is called in the state assembly phase of atomic 899 * modesets, which can be aborted for any reason (including on 900 * userspace's request to just check whether a configuration would be 901 * possible). Drivers MUST NOT touch any persistent state (hardware or 902 * software) or data structures except the passed in @state parameter. 903 * 904 * Also since userspace controls in which order properties are set this 905 * function must not do any input validation (since the state update is 906 * incomplete and hence likely inconsistent). Instead any such input 907 * validation must be done in the various atomic_check callbacks. 908 * 909 * RETURNS: 910 * 911 * 0 if the property has been found, -EINVAL if the property isn't 912 * implemented by the driver (which shouldn't ever happen, the core only 913 * asks for properties attached to this connector). No other validation 914 * is allowed by the driver. The core already checks that the property 915 * value is within the range (integer, valid enum value, ...) the driver 916 * set when registering the property. 917 */ 918 int (*atomic_set_property)(struct drm_connector *connector, 919 struct drm_connector_state *state, 920 struct drm_property *property, 921 uint64_t val); 922 923 /** 924 * @atomic_get_property: 925 * 926 * Reads out the decoded driver-private property. This is used to 927 * implement the GETCONNECTOR IOCTL. 928 * 929 * Do not call this function directly, use 930 * drm_atomic_connector_get_property() instead. 931 * 932 * This callback is optional if the driver does not support any 933 * driver-private atomic properties. 934 * 935 * RETURNS: 936 * 937 * 0 on success, -EINVAL if the property isn't implemented by the 938 * driver (which shouldn't ever happen, the core only asks for 939 * properties attached to this connector). 940 */ 941 int (*atomic_get_property)(struct drm_connector *connector, 942 const struct drm_connector_state *state, 943 struct drm_property *property, 944 uint64_t *val); 945 946 /** 947 * @atomic_print_state: 948 * 949 * If driver subclasses &struct drm_connector_state, it should implement 950 * this optional hook for printing additional driver specific state. 951 * 952 * Do not call this directly, use drm_atomic_connector_print_state() 953 * instead. 954 */ 955 void (*atomic_print_state)(struct drm_printer *p, 956 const struct drm_connector_state *state); 957 }; 958 959 /** 960 * struct drm_cmdline_mode - DRM Mode passed through the kernel command-line 961 * 962 * Each connector can have an initial mode with additional options 963 * passed through the kernel command line. This structure allows to 964 * express those parameters and will be filled by the command-line 965 * parser. 966 */ 967 struct drm_cmdline_mode { 968 /** 969 * @name: 970 * 971 * Name of the mode. 972 */ 973 char name[DRM_DISPLAY_MODE_LEN]; 974 975 /** 976 * @specified: 977 * 978 * Has a mode been read from the command-line? 979 */ 980 bool specified; 981 982 /** 983 * @refresh_specified: 984 * 985 * Did the mode have a preferred refresh rate? 986 */ 987 bool refresh_specified; 988 989 /** 990 * @bpp_specified: 991 * 992 * Did the mode have a preferred BPP? 993 */ 994 bool bpp_specified; 995 996 /** 997 * @xres: 998 * 999 * Active resolution on the X axis, in pixels. 1000 */ 1001 int xres; 1002 1003 /** 1004 * @yres: 1005 * 1006 * Active resolution on the Y axis, in pixels. 1007 */ 1008 int yres; 1009 1010 /** 1011 * @bpp: 1012 * 1013 * Bits per pixels for the mode. 1014 */ 1015 int bpp; 1016 1017 /** 1018 * @refresh: 1019 * 1020 * Refresh rate, in Hertz. 1021 */ 1022 int refresh; 1023 1024 /** 1025 * @rb: 1026 * 1027 * Do we need to use reduced blanking? 1028 */ 1029 bool rb; 1030 1031 /** 1032 * @interlace: 1033 * 1034 * The mode is interlaced. 1035 */ 1036 bool interlace; 1037 1038 /** 1039 * @cvt: 1040 * 1041 * The timings will be calculated using the VESA Coordinated 1042 * Video Timings instead of looking up the mode from a table. 1043 */ 1044 bool cvt; 1045 1046 /** 1047 * @margins: 1048 * 1049 * Add margins to the mode calculation (1.8% of xres rounded 1050 * down to 8 pixels and 1.8% of yres). 1051 */ 1052 bool margins; 1053 1054 /** 1055 * @force: 1056 * 1057 * Ignore the hotplug state of the connector, and force its 1058 * state to one of the DRM_FORCE_* values. 1059 */ 1060 enum drm_connector_force force; 1061 1062 /** 1063 * @rotation_reflection: 1064 * 1065 * Initial rotation and reflection of the mode setup from the 1066 * command line. See DRM_MODE_ROTATE_* and 1067 * DRM_MODE_REFLECT_*. The only rotations supported are 1068 * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180. 1069 */ 1070 unsigned int rotation_reflection; 1071 1072 /** 1073 * @tv_margins: TV margins to apply to the mode. 1074 */ 1075 struct drm_connector_tv_margins tv_margins; 1076 }; 1077 1078 /** 1079 * struct drm_connector - central DRM connector control structure 1080 * 1081 * Each connector may be connected to one or more CRTCs, or may be clonable by 1082 * another connector if they can share a CRTC. Each connector also has a specific 1083 * position in the broader display (referred to as a 'screen' though it could 1084 * span multiple monitors). 1085 */ 1086 struct drm_connector { 1087 /** @dev: parent DRM device */ 1088 struct drm_device *dev; 1089 /** @kdev: kernel device for sysfs attributes */ 1090 struct device *kdev; 1091 /** @attr: sysfs attributes */ 1092 struct device_attribute *attr; 1093 1094 /** 1095 * @head: 1096 * 1097 * List of all connectors on a @dev, linked from 1098 * &drm_mode_config.connector_list. Protected by 1099 * &drm_mode_config.connector_list_lock, but please only use 1100 * &drm_connector_list_iter to walk this list. 1101 */ 1102 struct list_head head; 1103 1104 /** @base: base KMS object */ 1105 struct drm_mode_object base; 1106 1107 /** @name: human readable name, can be overwritten by the driver */ 1108 char *name; 1109 1110 /** 1111 * @mutex: Lock for general connector state, but currently only protects 1112 * @registered. Most of the connector state is still protected by 1113 * &drm_mode_config.mutex. 1114 */ 1115 struct mutex mutex; 1116 1117 /** 1118 * @index: Compacted connector index, which matches the position inside 1119 * the mode_config.list for drivers not supporting hot-add/removing. Can 1120 * be used as an array index. It is invariant over the lifetime of the 1121 * connector. 1122 */ 1123 unsigned index; 1124 1125 /** 1126 * @connector_type: 1127 * one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h 1128 */ 1129 int connector_type; 1130 /** @connector_type_id: index into connector type enum */ 1131 int connector_type_id; 1132 /** 1133 * @interlace_allowed: 1134 * Can this connector handle interlaced modes? Only used by 1135 * drm_helper_probe_single_connector_modes() for mode filtering. 1136 */ 1137 bool interlace_allowed; 1138 /** 1139 * @doublescan_allowed: 1140 * Can this connector handle doublescan? Only used by 1141 * drm_helper_probe_single_connector_modes() for mode filtering. 1142 */ 1143 bool doublescan_allowed; 1144 /** 1145 * @stereo_allowed: 1146 * Can this connector handle stereo modes? Only used by 1147 * drm_helper_probe_single_connector_modes() for mode filtering. 1148 */ 1149 bool stereo_allowed; 1150 1151 /** 1152 * @ycbcr_420_allowed : This bool indicates if this connector is 1153 * capable of handling YCBCR 420 output. While parsing the EDID 1154 * blocks it's very helpful to know if the source is capable of 1155 * handling YCBCR 420 outputs. 1156 */ 1157 bool ycbcr_420_allowed; 1158 1159 /** 1160 * @registration_state: Is this connector initializing, exposed 1161 * (registered) with userspace, or unregistered? 1162 * 1163 * Protected by @mutex. 1164 */ 1165 enum drm_connector_registration_state registration_state; 1166 1167 /** 1168 * @modes: 1169 * Modes available on this connector (from fill_modes() + user). 1170 * Protected by &drm_mode_config.mutex. 1171 */ 1172 struct list_head modes; 1173 1174 /** 1175 * @status: 1176 * One of the drm_connector_status enums (connected, not, or unknown). 1177 * Protected by &drm_mode_config.mutex. 1178 */ 1179 enum drm_connector_status status; 1180 1181 /** 1182 * @probed_modes: 1183 * These are modes added by probing with DDC or the BIOS, before 1184 * filtering is applied. Used by the probe helpers. Protected by 1185 * &drm_mode_config.mutex. 1186 */ 1187 struct list_head probed_modes; 1188 1189 /** 1190 * @display_info: Display information is filled from EDID information 1191 * when a display is detected. For non hot-pluggable displays such as 1192 * flat panels in embedded systems, the driver should initialize the 1193 * &drm_display_info.width_mm and &drm_display_info.height_mm fields 1194 * with the physical size of the display. 1195 * 1196 * Protected by &drm_mode_config.mutex. 1197 */ 1198 struct drm_display_info display_info; 1199 1200 /** @funcs: connector control functions */ 1201 const struct drm_connector_funcs *funcs; 1202 1203 /** 1204 * @edid_blob_ptr: DRM property containing EDID if present. Protected by 1205 * &drm_mode_config.mutex. This should be updated only by calling 1206 * drm_connector_update_edid_property(). 1207 */ 1208 struct drm_property_blob *edid_blob_ptr; 1209 1210 /** @properties: property tracking for this connector */ 1211 struct drm_object_properties properties; 1212 1213 /** 1214 * @scaling_mode_property: Optional atomic property to control the 1215 * upscaling. See drm_connector_attach_content_protection_property(). 1216 */ 1217 struct drm_property *scaling_mode_property; 1218 1219 /** 1220 * @vrr_capable_property: Optional property to help userspace 1221 * query hardware support for variable refresh rate on a connector. 1222 * connector. Drivers can add the property to a connector by 1223 * calling drm_connector_attach_vrr_capable_property(). 1224 * 1225 * This should be updated only by calling 1226 * drm_connector_set_vrr_capable_property(). 1227 */ 1228 struct drm_property *vrr_capable_property; 1229 1230 /** 1231 * @colorspace_property: Connector property to set the suitable 1232 * colorspace supported by the sink. 1233 */ 1234 struct drm_property *colorspace_property; 1235 1236 /** 1237 * @path_blob_ptr: 1238 * 1239 * DRM blob property data for the DP MST path property. This should only 1240 * be updated by calling drm_connector_set_path_property(). 1241 */ 1242 struct drm_property_blob *path_blob_ptr; 1243 1244 /** 1245 * @max_bpc_property: Default connector property for the max bpc to be 1246 * driven out of the connector. 1247 */ 1248 struct drm_property *max_bpc_property; 1249 1250 #define DRM_CONNECTOR_POLL_HPD (1 << 0) 1251 #define DRM_CONNECTOR_POLL_CONNECT (1 << 1) 1252 #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) 1253 1254 /** 1255 * @polled: 1256 * 1257 * Connector polling mode, a combination of 1258 * 1259 * DRM_CONNECTOR_POLL_HPD 1260 * The connector generates hotplug events and doesn't need to be 1261 * periodically polled. The CONNECT and DISCONNECT flags must not 1262 * be set together with the HPD flag. 1263 * 1264 * DRM_CONNECTOR_POLL_CONNECT 1265 * Periodically poll the connector for connection. 1266 * 1267 * DRM_CONNECTOR_POLL_DISCONNECT 1268 * Periodically poll the connector for disconnection, without 1269 * causing flickering even when the connector is in use. DACs should 1270 * rarely do this without a lot of testing. 1271 * 1272 * Set to 0 for connectors that don't support connection status 1273 * discovery. 1274 */ 1275 uint8_t polled; 1276 1277 /** 1278 * @dpms: Current dpms state. For legacy drivers the 1279 * &drm_connector_funcs.dpms callback must update this. For atomic 1280 * drivers, this is handled by the core atomic code, and drivers must 1281 * only take &drm_crtc_state.active into account. 1282 */ 1283 int dpms; 1284 1285 /** @helper_private: mid-layer private data */ 1286 const struct drm_connector_helper_funcs *helper_private; 1287 1288 /** @cmdline_mode: mode line parsed from the kernel cmdline for this connector */ 1289 struct drm_cmdline_mode cmdline_mode; 1290 /** @force: a DRM_FORCE_<foo> state for forced mode sets */ 1291 enum drm_connector_force force; 1292 /** @override_edid: has the EDID been overwritten through debugfs for testing? */ 1293 bool override_edid; 1294 1295 /** 1296 * @possible_encoders: Bit mask of encoders that can drive this 1297 * connector, drm_encoder_index() determines the index into the bitfield 1298 * and the bits are set with drm_connector_attach_encoder(). 1299 */ 1300 u32 possible_encoders; 1301 1302 /** 1303 * @encoder: Currently bound encoder driving this connector, if any. 1304 * Only really meaningful for non-atomic drivers. Atomic drivers should 1305 * instead look at &drm_connector_state.best_encoder, and in case they 1306 * need the CRTC driving this output, &drm_connector_state.crtc. 1307 */ 1308 struct drm_encoder *encoder; 1309 1310 #define MAX_ELD_BYTES 128 1311 /** @eld: EDID-like data, if present */ 1312 uint8_t eld[MAX_ELD_BYTES]; 1313 /** @latency_present: AV delay info from ELD, if found */ 1314 bool latency_present[2]; 1315 /** 1316 * @video_latency: Video latency info from ELD, if found. 1317 * [0]: progressive, [1]: interlaced 1318 */ 1319 int video_latency[2]; 1320 /** 1321 * @audio_latency: audio latency info from ELD, if found 1322 * [0]: progressive, [1]: interlaced 1323 */ 1324 int audio_latency[2]; 1325 1326 /** 1327 * @ddc: associated ddc adapter. 1328 * A connector usually has its associated ddc adapter. If a driver uses 1329 * this field, then an appropriate symbolic link is created in connector 1330 * sysfs directory to make it easy for the user to tell which i2c 1331 * adapter is for a particular display. 1332 * 1333 * The field should be set by calling drm_connector_init_with_ddc(). 1334 */ 1335 struct i2c_adapter *ddc; 1336 1337 /** 1338 * @null_edid_counter: track sinks that give us all zeros for the EDID. 1339 * Needed to workaround some HW bugs where we get all 0s 1340 */ 1341 int null_edid_counter; 1342 1343 /** @bad_edid_counter: track sinks that give us an EDID with invalid checksum */ 1344 unsigned bad_edid_counter; 1345 1346 /** 1347 * @edid_corrupt: Indicates whether the last read EDID was corrupt. Used 1348 * in Displayport compliance testing - Displayport Link CTS Core 1.2 1349 * rev1.1 4.2.2.6 1350 */ 1351 bool edid_corrupt; 1352 1353 /** @debugfs_entry: debugfs directory for this connector */ 1354 struct dentry *debugfs_entry; 1355 1356 /** 1357 * @state: 1358 * 1359 * Current atomic state for this connector. 1360 * 1361 * This is protected by &drm_mode_config.connection_mutex. Note that 1362 * nonblocking atomic commits access the current connector state without 1363 * taking locks. Either by going through the &struct drm_atomic_state 1364 * pointers, see for_each_oldnew_connector_in_state(), 1365 * for_each_old_connector_in_state() and 1366 * for_each_new_connector_in_state(). Or through careful ordering of 1367 * atomic commit operations as implemented in the atomic helpers, see 1368 * &struct drm_crtc_commit. 1369 */ 1370 struct drm_connector_state *state; 1371 1372 /* DisplayID bits. FIXME: Extract into a substruct? */ 1373 1374 /** 1375 * @tile_blob_ptr: 1376 * 1377 * DRM blob property data for the tile property (used mostly by DP MST). 1378 * This is meant for screens which are driven through separate display 1379 * pipelines represented by &drm_crtc, which might not be running with 1380 * genlocked clocks. For tiled panels which are genlocked, like 1381 * dual-link LVDS or dual-link DSI, the driver should try to not expose 1382 * the tiling and virtualize both &drm_crtc and &drm_plane if needed. 1383 * 1384 * This should only be updated by calling 1385 * drm_connector_set_tile_property(). 1386 */ 1387 struct drm_property_blob *tile_blob_ptr; 1388 1389 /** @has_tile: is this connector connected to a tiled monitor */ 1390 bool has_tile; 1391 /** @tile_group: tile group for the connected monitor */ 1392 struct drm_tile_group *tile_group; 1393 /** @tile_is_single_monitor: whether the tile is one monitor housing */ 1394 bool tile_is_single_monitor; 1395 1396 /** @num_h_tile: number of horizontal tiles in the tile group */ 1397 /** @num_v_tile: number of vertical tiles in the tile group */ 1398 uint8_t num_h_tile, num_v_tile; 1399 /** @tile_h_loc: horizontal location of this tile */ 1400 /** @tile_v_loc: vertical location of this tile */ 1401 uint8_t tile_h_loc, tile_v_loc; 1402 /** @tile_h_size: horizontal size of this tile. */ 1403 /** @tile_v_size: vertical size of this tile. */ 1404 uint16_t tile_h_size, tile_v_size; 1405 1406 /** 1407 * @free_node: 1408 * 1409 * List used only by &drm_connector_list_iter to be able to clean up a 1410 * connector from any context, in conjunction with 1411 * &drm_mode_config.connector_free_work. 1412 */ 1413 struct llist_node free_node; 1414 1415 /** @hdr_sink_metadata: HDR Metadata Information read from sink */ 1416 struct hdr_sink_metadata hdr_sink_metadata; 1417 }; 1418 1419 #define obj_to_connector(x) container_of(x, struct drm_connector, base) 1420 1421 int drm_connector_init(struct drm_device *dev, 1422 struct drm_connector *connector, 1423 const struct drm_connector_funcs *funcs, 1424 int connector_type); 1425 int drm_connector_init_with_ddc(struct drm_device *dev, 1426 struct drm_connector *connector, 1427 const struct drm_connector_funcs *funcs, 1428 int connector_type, 1429 struct i2c_adapter *ddc); 1430 void drm_connector_attach_edid_property(struct drm_connector *connector); 1431 int drm_connector_register(struct drm_connector *connector); 1432 void drm_connector_unregister(struct drm_connector *connector); 1433 int drm_connector_attach_encoder(struct drm_connector *connector, 1434 struct drm_encoder *encoder); 1435 1436 void drm_connector_cleanup(struct drm_connector *connector); 1437 1438 static inline unsigned int drm_connector_index(const struct drm_connector *connector) 1439 { 1440 return connector->index; 1441 } 1442 1443 static inline u32 drm_connector_mask(const struct drm_connector *connector) 1444 { 1445 return 1 << connector->index; 1446 } 1447 1448 /** 1449 * drm_connector_lookup - lookup connector object 1450 * @dev: DRM device 1451 * @file_priv: drm file to check for lease against. 1452 * @id: connector object id 1453 * 1454 * This function looks up the connector object specified by id 1455 * add takes a reference to it. 1456 */ 1457 static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev, 1458 struct drm_file *file_priv, 1459 uint32_t id) 1460 { 1461 struct drm_mode_object *mo; 1462 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CONNECTOR); 1463 return mo ? obj_to_connector(mo) : NULL; 1464 } 1465 1466 /** 1467 * drm_connector_get - acquire a connector reference 1468 * @connector: DRM connector 1469 * 1470 * This function increments the connector's refcount. 1471 */ 1472 static inline void drm_connector_get(struct drm_connector *connector) 1473 { 1474 drm_mode_object_get(&connector->base); 1475 } 1476 1477 /** 1478 * drm_connector_put - release a connector reference 1479 * @connector: DRM connector 1480 * 1481 * This function decrements the connector's reference count and frees the 1482 * object if the reference count drops to zero. 1483 */ 1484 static inline void drm_connector_put(struct drm_connector *connector) 1485 { 1486 drm_mode_object_put(&connector->base); 1487 } 1488 1489 /** 1490 * drm_connector_is_unregistered - has the connector been unregistered from 1491 * userspace? 1492 * @connector: DRM connector 1493 * 1494 * Checks whether or not @connector has been unregistered from userspace. 1495 * 1496 * Returns: 1497 * True if the connector was unregistered, false if the connector is 1498 * registered or has not yet been registered with userspace. 1499 */ 1500 static inline bool 1501 drm_connector_is_unregistered(struct drm_connector *connector) 1502 { 1503 return READ_ONCE(connector->registration_state) == 1504 DRM_CONNECTOR_UNREGISTERED; 1505 } 1506 1507 const char *drm_get_connector_status_name(enum drm_connector_status status); 1508 const char *drm_get_subpixel_order_name(enum subpixel_order order); 1509 const char *drm_get_dpms_name(int val); 1510 const char *drm_get_dvi_i_subconnector_name(int val); 1511 const char *drm_get_dvi_i_select_name(int val); 1512 const char *drm_get_tv_subconnector_name(int val); 1513 const char *drm_get_tv_select_name(int val); 1514 const char *drm_get_content_protection_name(int val); 1515 const char *drm_get_hdcp_content_type_name(int val); 1516 1517 int drm_mode_create_dvi_i_properties(struct drm_device *dev); 1518 int drm_mode_create_tv_margin_properties(struct drm_device *dev); 1519 int drm_mode_create_tv_properties(struct drm_device *dev, 1520 unsigned int num_modes, 1521 const char * const modes[]); 1522 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn); 1523 int drm_mode_create_scaling_mode_property(struct drm_device *dev); 1524 int drm_connector_attach_content_type_property(struct drm_connector *dev); 1525 int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, 1526 u32 scaling_mode_mask); 1527 int drm_connector_attach_vrr_capable_property( 1528 struct drm_connector *connector); 1529 int drm_mode_create_aspect_ratio_property(struct drm_device *dev); 1530 int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector); 1531 int drm_mode_create_dp_colorspace_property(struct drm_connector *connector); 1532 int drm_mode_create_content_type_property(struct drm_device *dev); 1533 void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, 1534 const struct drm_connector_state *conn_state); 1535 1536 int drm_mode_create_suggested_offset_properties(struct drm_device *dev); 1537 1538 int drm_connector_set_path_property(struct drm_connector *connector, 1539 const char *path); 1540 int drm_connector_set_tile_property(struct drm_connector *connector); 1541 int drm_connector_update_edid_property(struct drm_connector *connector, 1542 const struct edid *edid); 1543 void drm_connector_set_link_status_property(struct drm_connector *connector, 1544 uint64_t link_status); 1545 void drm_connector_set_vrr_capable_property( 1546 struct drm_connector *connector, bool capable); 1547 int drm_connector_init_panel_orientation_property( 1548 struct drm_connector *connector, int width, int height); 1549 int drm_connector_attach_max_bpc_property(struct drm_connector *connector, 1550 int min, int max); 1551 1552 /** 1553 * struct drm_tile_group - Tile group metadata 1554 * @refcount: reference count 1555 * @dev: DRM device 1556 * @id: tile group id exposed to userspace 1557 * @group_data: Sink-private data identifying this group 1558 * 1559 * @group_data corresponds to displayid vend/prod/serial for external screens 1560 * with an EDID. 1561 */ 1562 struct drm_tile_group { 1563 struct kref refcount; 1564 struct drm_device *dev; 1565 int id; 1566 u8 group_data[8]; 1567 }; 1568 1569 struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, 1570 char topology[8]); 1571 struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, 1572 char topology[8]); 1573 void drm_mode_put_tile_group(struct drm_device *dev, 1574 struct drm_tile_group *tg); 1575 1576 /** 1577 * struct drm_connector_list_iter - connector_list iterator 1578 * 1579 * This iterator tracks state needed to be able to walk the connector_list 1580 * within struct drm_mode_config. Only use together with 1581 * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and 1582 * drm_connector_list_iter_next() respectively the convenience macro 1583 * drm_for_each_connector_iter(). 1584 */ 1585 struct drm_connector_list_iter { 1586 /* private: */ 1587 struct drm_device *dev; 1588 struct drm_connector *conn; 1589 }; 1590 1591 void drm_connector_list_iter_begin(struct drm_device *dev, 1592 struct drm_connector_list_iter *iter); 1593 struct drm_connector * 1594 drm_connector_list_iter_next(struct drm_connector_list_iter *iter); 1595 void drm_connector_list_iter_end(struct drm_connector_list_iter *iter); 1596 1597 bool drm_connector_has_possible_encoder(struct drm_connector *connector, 1598 struct drm_encoder *encoder); 1599 1600 /** 1601 * drm_for_each_connector_iter - connector_list iterator macro 1602 * @connector: &struct drm_connector pointer used as cursor 1603 * @iter: &struct drm_connector_list_iter 1604 * 1605 * Note that @connector is only valid within the list body, if you want to use 1606 * @connector after calling drm_connector_list_iter_end() then you need to grab 1607 * your own reference first using drm_connector_get(). 1608 */ 1609 #define drm_for_each_connector_iter(connector, iter) \ 1610 while ((connector = drm_connector_list_iter_next(iter))) 1611 1612 /** 1613 * drm_connector_for_each_possible_encoder - iterate connector's possible encoders 1614 * @connector: &struct drm_connector pointer 1615 * @encoder: &struct drm_encoder pointer used as cursor 1616 */ 1617 #define drm_connector_for_each_possible_encoder(connector, encoder) \ 1618 drm_for_each_encoder_mask(encoder, (connector)->dev, \ 1619 (connector)->possible_encoders) 1620 1621 #endif 1622