1 /* 2 * Copyright (c) 2016 Intel Corporation 3 * 4 * Permission to use, copy, modify, distribute, and sell this software and its 5 * documentation for any purpose is hereby granted without fee, provided that 6 * the above copyright notice appear in all copies and that both that copyright 7 * notice and this permission notice appear in supporting documentation, and 8 * that the name of the copyright holders not be used in advertising or 9 * publicity pertaining to distribution of the software without specific, 10 * written prior permission. The copyright holders make no representations 11 * about the suitability of this software for any purpose. It is provided "as 12 * is" without express or implied warranty. 13 * 14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR 17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 20 * OF THIS SOFTWARE. 21 */ 22 23 #ifndef __DRM_CONNECTOR_H__ 24 #define __DRM_CONNECTOR_H__ 25 26 #include <linux/list.h> 27 #include <linux/llist.h> 28 #include <linux/ctype.h> 29 #include <linux/hdmi.h> 30 #include <drm/drm_mode_object.h> 31 #include <drm/drm_util.h> 32 33 #include <uapi/drm/drm_mode.h> 34 35 struct drm_connector_helper_funcs; 36 struct drm_modeset_acquire_ctx; 37 struct drm_device; 38 struct drm_crtc; 39 struct drm_encoder; 40 struct drm_property; 41 struct drm_property_blob; 42 struct drm_printer; 43 struct edid; 44 struct i2c_adapter; 45 46 enum drm_connector_force { 47 DRM_FORCE_UNSPECIFIED, 48 DRM_FORCE_OFF, 49 DRM_FORCE_ON, /* force on analog part normally */ 50 DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ 51 }; 52 53 /** 54 * enum drm_connector_status - status for a &drm_connector 55 * 56 * This enum is used to track the connector status. There are no separate 57 * #defines for the uapi! 58 */ 59 enum drm_connector_status { 60 /** 61 * @connector_status_connected: The connector is definitely connected to 62 * a sink device, and can be enabled. 63 */ 64 connector_status_connected = 1, 65 /** 66 * @connector_status_disconnected: The connector isn't connected to a 67 * sink device which can be autodetect. For digital outputs like DP or 68 * HDMI (which can be realiable probed) this means there's really 69 * nothing there. It is driver-dependent whether a connector with this 70 * status can be lit up or not. 71 */ 72 connector_status_disconnected = 2, 73 /** 74 * @connector_status_unknown: The connector's status could not be 75 * reliably detected. This happens when probing would either cause 76 * flicker (like load-detection when the connector is in use), or when a 77 * hardware resource isn't available (like when load-detection needs a 78 * free CRTC). It should be possible to light up the connector with one 79 * of the listed fallback modes. For default configuration userspace 80 * should only try to light up connectors with unknown status when 81 * there's not connector with @connector_status_connected. 82 */ 83 connector_status_unknown = 3, 84 }; 85 86 /** 87 * enum drm_connector_registration_state - userspace registration status for 88 * a &drm_connector 89 * 90 * This enum is used to track the status of initializing a connector and 91 * registering it with userspace, so that DRM can prevent bogus modesets on 92 * connectors that no longer exist. 93 */ 94 enum drm_connector_registration_state { 95 /** 96 * @DRM_CONNECTOR_INITIALIZING: The connector has just been created, 97 * but has yet to be exposed to userspace. There should be no 98 * additional restrictions to how the state of this connector may be 99 * modified. 100 */ 101 DRM_CONNECTOR_INITIALIZING = 0, 102 103 /** 104 * @DRM_CONNECTOR_REGISTERED: The connector has been fully initialized 105 * and registered with sysfs, as such it has been exposed to 106 * userspace. There should be no additional restrictions to how the 107 * state of this connector may be modified. 108 */ 109 DRM_CONNECTOR_REGISTERED = 1, 110 111 /** 112 * @DRM_CONNECTOR_UNREGISTERED: The connector has either been exposed 113 * to userspace and has since been unregistered and removed from 114 * userspace, or the connector was unregistered before it had a chance 115 * to be exposed to userspace (e.g. still in the 116 * @DRM_CONNECTOR_INITIALIZING state). When a connector is 117 * unregistered, there are additional restrictions to how its state 118 * may be modified: 119 * 120 * - An unregistered connector may only have its DPMS changed from 121 * On->Off. Once DPMS is changed to Off, it may not be switched back 122 * to On. 123 * - Modesets are not allowed on unregistered connectors, unless they 124 * would result in disabling its assigned CRTCs. This means 125 * disabling a CRTC on an unregistered connector is OK, but enabling 126 * one is not. 127 * - Removing a CRTC from an unregistered connector is OK, but new 128 * CRTCs may never be assigned to an unregistered connector. 129 */ 130 DRM_CONNECTOR_UNREGISTERED = 2, 131 }; 132 133 enum subpixel_order { 134 SubPixelUnknown = 0, 135 SubPixelHorizontalRGB, 136 SubPixelHorizontalBGR, 137 SubPixelVerticalRGB, 138 SubPixelVerticalBGR, 139 SubPixelNone, 140 141 }; 142 143 /** 144 * struct drm_scrambling: sink's scrambling support. 145 */ 146 struct drm_scrambling { 147 /** 148 * @supported: scrambling supported for rates > 340 Mhz. 149 */ 150 bool supported; 151 /** 152 * @low_rates: scrambling supported for rates <= 340 Mhz. 153 */ 154 bool low_rates; 155 }; 156 157 /* 158 * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink 159 * 160 * Provides SCDC register support and capabilities related information on a 161 * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0. 162 */ 163 struct drm_scdc { 164 /** 165 * @supported: status control & data channel present. 166 */ 167 bool supported; 168 /** 169 * @read_request: sink is capable of generating scdc read request. 170 */ 171 bool read_request; 172 /** 173 * @scrambling: sink's scrambling capabilities 174 */ 175 struct drm_scrambling scrambling; 176 }; 177 178 /** 179 * struct drm_hdmi_dsc_cap - DSC capabilities of HDMI sink 180 * 181 * Describes the DSC support provided by HDMI 2.1 sink. 182 * The information is fetched fom additional HFVSDB blocks defined 183 * for HDMI 2.1. 184 */ 185 struct drm_hdmi_dsc_cap { 186 /** @v_1p2: flag for dsc1.2 version support by sink */ 187 bool v_1p2; 188 189 /** @native_420: Does sink support DSC with 4:2:0 compression */ 190 bool native_420; 191 192 /** 193 * @all_bpp: Does sink support all bpp with 4:4:4: or 4:2:2 194 * compressed formats 195 */ 196 bool all_bpp; 197 198 /** 199 * @bpc_supported: compressed bpc supported by sink : 10, 12 or 16 bpc 200 */ 201 u8 bpc_supported; 202 203 /** @max_slices: maximum number of Horizontal slices supported by */ 204 u8 max_slices; 205 206 /** @clk_per_slice : max pixel clock in MHz supported per slice */ 207 int clk_per_slice; 208 209 /** @max_lanes : dsc max lanes supported for Fixed rate Link training */ 210 u8 max_lanes; 211 212 /** @max_frl_rate_per_lane : maximum frl rate with DSC per lane */ 213 u8 max_frl_rate_per_lane; 214 215 /** @total_chunk_kbytes: max size of chunks in KBs supported per line*/ 216 u8 total_chunk_kbytes; 217 }; 218 219 /** 220 * struct drm_hdmi_info - runtime information about the connected HDMI sink 221 * 222 * Describes if a given display supports advanced HDMI 2.0 features. 223 * This information is available in CEA-861-F extension blocks (like HF-VSDB). 224 */ 225 struct drm_hdmi_info { 226 /** @scdc: sink's scdc support and capabilities */ 227 struct drm_scdc scdc; 228 229 /** 230 * @y420_vdb_modes: bitmap of modes which can support ycbcr420 231 * output only (not normal RGB/YCBCR444/422 outputs). The max VIC 232 * defined by the CEA-861-G spec is 219, so the size is 256 bits to map 233 * up to 256 VICs. 234 */ 235 unsigned long y420_vdb_modes[BITS_TO_LONGS(256)]; 236 237 /** 238 * @y420_cmdb_modes: bitmap of modes which can support ycbcr420 239 * output also, along with normal HDMI outputs. The max VIC defined by 240 * the CEA-861-G spec is 219, so the size is 256 bits to map up to 256 241 * VICs. 242 */ 243 unsigned long y420_cmdb_modes[BITS_TO_LONGS(256)]; 244 245 /** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */ 246 u64 y420_cmdb_map; 247 248 /** @y420_dc_modes: bitmap of deep color support index */ 249 u8 y420_dc_modes; 250 251 /** @max_frl_rate_per_lane: support fixed rate link */ 252 u8 max_frl_rate_per_lane; 253 254 /** @max_lanes: supported by sink */ 255 u8 max_lanes; 256 257 /** @dsc_cap: DSC capabilities of the sink */ 258 struct drm_hdmi_dsc_cap dsc_cap; 259 }; 260 261 /** 262 * enum drm_link_status - connector's link_status property value 263 * 264 * This enum is used as the connector's link status property value. 265 * It is set to the values defined in uapi. 266 * 267 * @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful 268 * link training 269 * @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training 270 * failure 271 */ 272 enum drm_link_status { 273 DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD, 274 DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD, 275 }; 276 277 /** 278 * enum drm_panel_orientation - panel_orientation info for &drm_display_info 279 * 280 * This enum is used to track the (LCD) panel orientation. There are no 281 * separate #defines for the uapi! 282 * 283 * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any 284 * panel orientation information (normal 285 * for non panels) in this case the "panel 286 * orientation" connector prop will not be 287 * attached. 288 * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the 289 * top side of the device's casing. 290 * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the 291 * bottom side of the device's casing, iow 292 * the panel is mounted upside-down. 293 * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the 294 * top side of the device's casing. 295 * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the 296 * top side of the device's casing. 297 */ 298 enum drm_panel_orientation { 299 DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1, 300 DRM_MODE_PANEL_ORIENTATION_NORMAL = 0, 301 DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, 302 DRM_MODE_PANEL_ORIENTATION_LEFT_UP, 303 DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, 304 }; 305 306 /** 307 * struct drm_monitor_range_info - Panel's Monitor range in EDID for 308 * &drm_display_info 309 * 310 * This struct is used to store a frequency range supported by panel 311 * as parsed from EDID's detailed monitor range descriptor block. 312 * 313 * @min_vfreq: This is the min supported refresh rate in Hz from 314 * EDID's detailed monitor range. 315 * @max_vfreq: This is the max supported refresh rate in Hz from 316 * EDID's detailed monitor range 317 */ 318 struct drm_monitor_range_info { 319 u8 min_vfreq; 320 u8 max_vfreq; 321 }; 322 323 /* 324 * This is a consolidated colorimetry list supported by HDMI and 325 * DP protocol standard. The respective connectors will register 326 * a property with the subset of this list (supported by that 327 * respective protocol). Userspace will set the colorspace through 328 * a colorspace property which will be created and exposed to 329 * userspace. 330 */ 331 332 /* For Default case, driver will set the colorspace */ 333 #define DRM_MODE_COLORIMETRY_DEFAULT 0 334 /* CEA 861 Normal Colorimetry options */ 335 #define DRM_MODE_COLORIMETRY_NO_DATA 0 336 #define DRM_MODE_COLORIMETRY_SMPTE_170M_YCC 1 337 #define DRM_MODE_COLORIMETRY_BT709_YCC 2 338 /* CEA 861 Extended Colorimetry Options */ 339 #define DRM_MODE_COLORIMETRY_XVYCC_601 3 340 #define DRM_MODE_COLORIMETRY_XVYCC_709 4 341 #define DRM_MODE_COLORIMETRY_SYCC_601 5 342 #define DRM_MODE_COLORIMETRY_OPYCC_601 6 343 #define DRM_MODE_COLORIMETRY_OPRGB 7 344 #define DRM_MODE_COLORIMETRY_BT2020_CYCC 8 345 #define DRM_MODE_COLORIMETRY_BT2020_RGB 9 346 #define DRM_MODE_COLORIMETRY_BT2020_YCC 10 347 /* Additional Colorimetry extension added as part of CTA 861.G */ 348 #define DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65 11 349 #define DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER 12 350 /* Additional Colorimetry Options added for DP 1.4a VSC Colorimetry Format */ 351 #define DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED 13 352 #define DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT 14 353 #define DRM_MODE_COLORIMETRY_BT601_YCC 15 354 355 /** 356 * enum drm_bus_flags - bus_flags info for &drm_display_info 357 * 358 * This enum defines signal polarities and clock edge information for signals on 359 * a bus as bitmask flags. 360 * 361 * The clock edge information is conveyed by two sets of symbols, 362 * DRM_BUS_FLAGS_*_DRIVE_\* and DRM_BUS_FLAGS_*_SAMPLE_\*. When this enum is 363 * used to describe a bus from the point of view of the transmitter, the 364 * \*_DRIVE_\* flags should be used. When used from the point of view of the 365 * receiver, the \*_SAMPLE_\* flags should be used. The \*_DRIVE_\* and 366 * \*_SAMPLE_\* flags alias each other, with the \*_SAMPLE_POSEDGE and 367 * \*_SAMPLE_NEGEDGE flags being equal to \*_DRIVE_NEGEDGE and \*_DRIVE_POSEDGE 368 * respectively. This simplifies code as signals are usually sampled on the 369 * opposite edge of the driving edge. Transmitters and receivers may however 370 * need to take other signal timings into account to convert between driving 371 * and sample edges. 372 */ 373 enum drm_bus_flags { 374 /** 375 * @DRM_BUS_FLAG_DE_LOW: 376 * 377 * The Data Enable signal is active low 378 */ 379 DRM_BUS_FLAG_DE_LOW = BIT(0), 380 381 /** 382 * @DRM_BUS_FLAG_DE_HIGH: 383 * 384 * The Data Enable signal is active high 385 */ 386 DRM_BUS_FLAG_DE_HIGH = BIT(1), 387 388 /** 389 * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: 390 * 391 * Data is driven on the rising edge of the pixel clock 392 */ 393 DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = BIT(2), 394 395 /** 396 * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: 397 * 398 * Data is driven on the falling edge of the pixel clock 399 */ 400 DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = BIT(3), 401 402 /** 403 * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE: 404 * 405 * Data is sampled on the rising edge of the pixel clock 406 */ 407 DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, 408 409 /** 410 * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE: 411 * 412 * Data is sampled on the falling edge of the pixel clock 413 */ 414 DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, 415 416 /** 417 * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: 418 * 419 * Data is transmitted MSB to LSB on the bus 420 */ 421 DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4), 422 423 /** 424 * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: 425 * 426 * Data is transmitted LSB to MSB on the bus 427 */ 428 DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5), 429 430 /** 431 * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: 432 * 433 * Sync signals are driven on the rising edge of the pixel clock 434 */ 435 DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = BIT(6), 436 437 /** 438 * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: 439 * 440 * Sync signals are driven on the falling edge of the pixel clock 441 */ 442 DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = BIT(7), 443 444 /** 445 * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE: 446 * 447 * Sync signals are sampled on the rising edge of the pixel clock 448 */ 449 DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE, 450 451 /** 452 * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE: 453 * 454 * Sync signals are sampled on the falling edge of the pixel clock 455 */ 456 DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, 457 458 /** 459 * @DRM_BUS_FLAG_SHARP_SIGNALS: 460 * 461 * Set if the Sharp-specific signals (SPL, CLS, PS, REV) must be used 462 */ 463 DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8), 464 }; 465 466 /** 467 * struct drm_display_info - runtime data about the connected sink 468 * 469 * Describes a given display (e.g. CRT or flat panel) and its limitations. For 470 * fixed display sinks like built-in panels there's not much difference between 471 * this and &struct drm_connector. But for sinks with a real cable this 472 * structure is meant to describe all the things at the other end of the cable. 473 * 474 * For sinks which provide an EDID this can be filled out by calling 475 * drm_add_edid_modes(). 476 */ 477 struct drm_display_info { 478 /** 479 * @width_mm: Physical width in mm. 480 */ 481 unsigned int width_mm; 482 483 /** 484 * @height_mm: Physical height in mm. 485 */ 486 unsigned int height_mm; 487 488 /** 489 * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs. 490 */ 491 unsigned int bpc; 492 493 /** 494 * @subpixel_order: Subpixel order of LCD panels. 495 */ 496 enum subpixel_order subpixel_order; 497 498 #define DRM_COLOR_FORMAT_RGB444 (1<<0) 499 #define DRM_COLOR_FORMAT_YCRCB444 (1<<1) 500 #define DRM_COLOR_FORMAT_YCRCB422 (1<<2) 501 #define DRM_COLOR_FORMAT_YCRCB420 (1<<3) 502 503 /** 504 * @panel_orientation: Read only connector property for built-in panels, 505 * indicating the orientation of the panel vs the device's casing. 506 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. 507 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the 508 * fb to compensate and gets exported as prop to userspace. 509 */ 510 int panel_orientation; 511 512 /** 513 * @color_formats: HDMI Color formats, selects between RGB and YCrCb 514 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones 515 * as used to describe the pixel format in framebuffers, and also don't 516 * match the formats in @bus_formats which are shared with v4l. 517 */ 518 u32 color_formats; 519 520 /** 521 * @bus_formats: Pixel data format on the wire, somewhat redundant with 522 * @color_formats. Array of size @num_bus_formats encoded using 523 * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers. 524 */ 525 const u32 *bus_formats; 526 /** 527 * @num_bus_formats: Size of @bus_formats array. 528 */ 529 unsigned int num_bus_formats; 530 531 /** 532 * @bus_flags: Additional information (like pixel signal polarity) for 533 * the pixel data on the bus, using &enum drm_bus_flags values 534 * DRM_BUS_FLAGS\_. 535 */ 536 u32 bus_flags; 537 538 /** 539 * @max_tmds_clock: Maximum TMDS clock rate supported by the 540 * sink in kHz. 0 means undefined. 541 */ 542 int max_tmds_clock; 543 544 /** 545 * @dvi_dual: Dual-link DVI sink? 546 */ 547 bool dvi_dual; 548 549 /** 550 * @is_hdmi: True if the sink is an HDMI device. 551 * 552 * This field shall be used instead of calling 553 * drm_detect_hdmi_monitor() when possible. 554 */ 555 bool is_hdmi; 556 557 /** 558 * @has_hdmi_infoframe: Does the sink support the HDMI infoframe? 559 */ 560 bool has_hdmi_infoframe; 561 562 /** 563 * @rgb_quant_range_selectable: Does the sink support selecting 564 * the RGB quantization range? 565 */ 566 bool rgb_quant_range_selectable; 567 568 /** 569 * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even 570 * more stuff redundant with @bus_formats. 571 */ 572 u8 edid_hdmi_dc_modes; 573 574 /** 575 * @cea_rev: CEA revision of the HDMI sink. 576 */ 577 u8 cea_rev; 578 579 /** 580 * @hdmi: advance features of a HDMI sink. 581 */ 582 struct drm_hdmi_info hdmi; 583 584 /** 585 * @non_desktop: Non desktop display (HMD). 586 */ 587 bool non_desktop; 588 589 /** 590 * @monitor_range: Frequency range supported by monitor range descriptor 591 */ 592 struct drm_monitor_range_info monitor_range; 593 }; 594 595 int drm_display_info_set_bus_formats(struct drm_display_info *info, 596 const u32 *formats, 597 unsigned int num_formats); 598 599 /** 600 * struct drm_connector_tv_margins - TV connector related margins 601 * 602 * Describes the margins in pixels to put around the image on TV 603 * connectors to deal with overscan. 604 */ 605 struct drm_connector_tv_margins { 606 /** 607 * @bottom: Bottom margin in pixels. 608 */ 609 unsigned int bottom; 610 611 /** 612 * @left: Left margin in pixels. 613 */ 614 unsigned int left; 615 616 /** 617 * @right: Right margin in pixels. 618 */ 619 unsigned int right; 620 621 /** 622 * @top: Top margin in pixels. 623 */ 624 unsigned int top; 625 }; 626 627 /** 628 * struct drm_tv_connector_state - TV connector related states 629 * @subconnector: selected subconnector 630 * @margins: TV margins 631 * @mode: TV mode 632 * @brightness: brightness in percent 633 * @contrast: contrast in percent 634 * @flicker_reduction: flicker reduction in percent 635 * @overscan: overscan in percent 636 * @saturation: saturation in percent 637 * @hue: hue in percent 638 */ 639 struct drm_tv_connector_state { 640 enum drm_mode_subconnector subconnector; 641 struct drm_connector_tv_margins margins; 642 unsigned int mode; 643 unsigned int brightness; 644 unsigned int contrast; 645 unsigned int flicker_reduction; 646 unsigned int overscan; 647 unsigned int saturation; 648 unsigned int hue; 649 }; 650 651 /** 652 * struct drm_connector_state - mutable connector state 653 */ 654 struct drm_connector_state { 655 /** @connector: backpointer to the connector */ 656 struct drm_connector *connector; 657 658 /** 659 * @crtc: CRTC to connect connector to, NULL if disabled. 660 * 661 * Do not change this directly, use drm_atomic_set_crtc_for_connector() 662 * instead. 663 */ 664 struct drm_crtc *crtc; 665 666 /** 667 * @best_encoder: 668 * 669 * Used by the atomic helpers to select the encoder, through the 670 * &drm_connector_helper_funcs.atomic_best_encoder or 671 * &drm_connector_helper_funcs.best_encoder callbacks. 672 * 673 * This is also used in the atomic helpers to map encoders to their 674 * current and previous connectors, see 675 * drm_atomic_get_old_connector_for_encoder() and 676 * drm_atomic_get_new_connector_for_encoder(). 677 * 678 * NOTE: Atomic drivers must fill this out (either themselves or through 679 * helpers), for otherwise the GETCONNECTOR and GETENCODER IOCTLs will 680 * not return correct data to userspace. 681 */ 682 struct drm_encoder *best_encoder; 683 684 /** 685 * @link_status: Connector link_status to keep track of whether link is 686 * GOOD or BAD to notify userspace if retraining is necessary. 687 */ 688 enum drm_link_status link_status; 689 690 /** @state: backpointer to global drm_atomic_state */ 691 struct drm_atomic_state *state; 692 693 /** 694 * @commit: Tracks the pending commit to prevent use-after-free conditions. 695 * 696 * Is only set when @crtc is NULL. 697 */ 698 struct drm_crtc_commit *commit; 699 700 /** @tv: TV connector state */ 701 struct drm_tv_connector_state tv; 702 703 /** 704 * @self_refresh_aware: 705 * 706 * This tracks whether a connector is aware of the self refresh state. 707 * It should be set to true for those connector implementations which 708 * understand the self refresh state. This is needed since the crtc 709 * registers the self refresh helpers and it doesn't know if the 710 * connectors downstream have implemented self refresh entry/exit. 711 * 712 * Drivers should set this to true in atomic_check if they know how to 713 * handle self_refresh requests. 714 */ 715 bool self_refresh_aware; 716 717 /** 718 * @picture_aspect_ratio: Connector property to control the 719 * HDMI infoframe aspect ratio setting. 720 * 721 * The %DRM_MODE_PICTURE_ASPECT_\* values much match the 722 * values for &enum hdmi_picture_aspect 723 */ 724 enum hdmi_picture_aspect picture_aspect_ratio; 725 726 /** 727 * @content_type: Connector property to control the 728 * HDMI infoframe content type setting. 729 * The %DRM_MODE_CONTENT_TYPE_\* values much 730 * match the values. 731 */ 732 unsigned int content_type; 733 734 /** 735 * @hdcp_content_type: Connector property to pass the type of 736 * protected content. This is most commonly used for HDCP. 737 */ 738 unsigned int hdcp_content_type; 739 740 /** 741 * @scaling_mode: Connector property to control the 742 * upscaling, mostly used for built-in panels. 743 */ 744 unsigned int scaling_mode; 745 746 /** 747 * @content_protection: Connector property to request content 748 * protection. This is most commonly used for HDCP. 749 */ 750 unsigned int content_protection; 751 752 /** 753 * @colorspace: State variable for Connector property to request 754 * colorspace change on Sink. This is most commonly used to switch 755 * to wider color gamuts like BT2020. 756 */ 757 u32 colorspace; 758 759 /** 760 * @writeback_job: Writeback job for writeback connectors 761 * 762 * Holds the framebuffer and out-fence for a writeback connector. As 763 * the writeback completion may be asynchronous to the normal commit 764 * cycle, the writeback job lifetime is managed separately from the 765 * normal atomic state by this object. 766 * 767 * See also: drm_writeback_queue_job() and 768 * drm_writeback_signal_completion() 769 */ 770 struct drm_writeback_job *writeback_job; 771 772 /** 773 * @max_requested_bpc: Connector property to limit the maximum bit 774 * depth of the pixels. 775 */ 776 u8 max_requested_bpc; 777 778 /** 779 * @max_bpc: Connector max_bpc based on the requested max_bpc property 780 * and the connector bpc limitations obtained from edid. 781 */ 782 u8 max_bpc; 783 784 /** 785 * @hdr_output_metadata: 786 * DRM blob property for HDR output metadata 787 */ 788 struct drm_property_blob *hdr_output_metadata; 789 }; 790 791 /** 792 * struct drm_connector_funcs - control connectors on a given device 793 * 794 * Each CRTC may have one or more connectors attached to it. The functions 795 * below allow the core DRM code to control connectors, enumerate available modes, 796 * etc. 797 */ 798 struct drm_connector_funcs { 799 /** 800 * @dpms: 801 * 802 * Legacy entry point to set the per-connector DPMS state. Legacy DPMS 803 * is exposed as a standard property on the connector, but diverted to 804 * this callback in the drm core. Note that atomic drivers don't 805 * implement the 4 level DPMS support on the connector any more, but 806 * instead only have an on/off "ACTIVE" property on the CRTC object. 807 * 808 * This hook is not used by atomic drivers, remapping of the legacy DPMS 809 * property is entirely handled in the DRM core. 810 * 811 * RETURNS: 812 * 813 * 0 on success or a negative error code on failure. 814 */ 815 int (*dpms)(struct drm_connector *connector, int mode); 816 817 /** 818 * @reset: 819 * 820 * Reset connector hardware and software state to off. This function isn't 821 * called by the core directly, only through drm_mode_config_reset(). 822 * It's not a helper hook only for historical reasons. 823 * 824 * Atomic drivers can use drm_atomic_helper_connector_reset() to reset 825 * atomic state using this hook. 826 */ 827 void (*reset)(struct drm_connector *connector); 828 829 /** 830 * @detect: 831 * 832 * Check to see if anything is attached to the connector. The parameter 833 * force is set to false whilst polling, true when checking the 834 * connector due to a user request. force can be used by the driver to 835 * avoid expensive, destructive operations during automated probing. 836 * 837 * This callback is optional, if not implemented the connector will be 838 * considered as always being attached. 839 * 840 * FIXME: 841 * 842 * Note that this hook is only called by the probe helper. It's not in 843 * the helper library vtable purely for historical reasons. The only DRM 844 * core entry point to probe connector state is @fill_modes. 845 * 846 * Note that the helper library will already hold 847 * &drm_mode_config.connection_mutex. Drivers which need to grab additional 848 * locks to avoid races with concurrent modeset changes need to use 849 * &drm_connector_helper_funcs.detect_ctx instead. 850 * 851 * RETURNS: 852 * 853 * drm_connector_status indicating the connector's status. 854 */ 855 enum drm_connector_status (*detect)(struct drm_connector *connector, 856 bool force); 857 858 /** 859 * @force: 860 * 861 * This function is called to update internal encoder state when the 862 * connector is forced to a certain state by userspace, either through 863 * the sysfs interfaces or on the kernel cmdline. In that case the 864 * @detect callback isn't called. 865 * 866 * FIXME: 867 * 868 * Note that this hook is only called by the probe helper. It's not in 869 * the helper library vtable purely for historical reasons. The only DRM 870 * core entry point to probe connector state is @fill_modes. 871 */ 872 void (*force)(struct drm_connector *connector); 873 874 /** 875 * @fill_modes: 876 * 877 * Entry point for output detection and basic mode validation. The 878 * driver should reprobe the output if needed (e.g. when hotplug 879 * handling is unreliable), add all detected modes to &drm_connector.modes 880 * and filter out any the device can't support in any configuration. It 881 * also needs to filter out any modes wider or higher than the 882 * parameters max_width and max_height indicate. 883 * 884 * The drivers must also prune any modes no longer valid from 885 * &drm_connector.modes. Furthermore it must update 886 * &drm_connector.status and &drm_connector.edid. If no EDID has been 887 * received for this output connector->edid must be NULL. 888 * 889 * Drivers using the probe helpers should use 890 * drm_helper_probe_single_connector_modes() to implement this 891 * function. 892 * 893 * RETURNS: 894 * 895 * The number of modes detected and filled into &drm_connector.modes. 896 */ 897 int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); 898 899 /** 900 * @set_property: 901 * 902 * This is the legacy entry point to update a property attached to the 903 * connector. 904 * 905 * This callback is optional if the driver does not support any legacy 906 * driver-private properties. For atomic drivers it is not used because 907 * property handling is done entirely in the DRM core. 908 * 909 * RETURNS: 910 * 911 * 0 on success or a negative error code on failure. 912 */ 913 int (*set_property)(struct drm_connector *connector, struct drm_property *property, 914 uint64_t val); 915 916 /** 917 * @late_register: 918 * 919 * This optional hook can be used to register additional userspace 920 * interfaces attached to the connector, light backlight control, i2c, 921 * DP aux or similar interfaces. It is called late in the driver load 922 * sequence from drm_connector_register() when registering all the 923 * core drm connector interfaces. Everything added from this callback 924 * should be unregistered in the early_unregister callback. 925 * 926 * This is called while holding &drm_connector.mutex. 927 * 928 * Returns: 929 * 930 * 0 on success, or a negative error code on failure. 931 */ 932 int (*late_register)(struct drm_connector *connector); 933 934 /** 935 * @early_unregister: 936 * 937 * This optional hook should be used to unregister the additional 938 * userspace interfaces attached to the connector from 939 * late_register(). It is called from drm_connector_unregister(), 940 * early in the driver unload sequence to disable userspace access 941 * before data structures are torndown. 942 * 943 * This is called while holding &drm_connector.mutex. 944 */ 945 void (*early_unregister)(struct drm_connector *connector); 946 947 /** 948 * @destroy: 949 * 950 * Clean up connector resources. This is called at driver unload time 951 * through drm_mode_config_cleanup(). It can also be called at runtime 952 * when a connector is being hot-unplugged for drivers that support 953 * connector hotplugging (e.g. DisplayPort MST). 954 */ 955 void (*destroy)(struct drm_connector *connector); 956 957 /** 958 * @atomic_duplicate_state: 959 * 960 * Duplicate the current atomic state for this connector and return it. 961 * The core and helpers guarantee that any atomic state duplicated with 962 * this hook and still owned by the caller (i.e. not transferred to the 963 * driver by calling &drm_mode_config_funcs.atomic_commit) will be 964 * cleaned up by calling the @atomic_destroy_state hook in this 965 * structure. 966 * 967 * This callback is mandatory for atomic drivers. 968 * 969 * Atomic drivers which don't subclass &struct drm_connector_state should use 970 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the 971 * state structure to extend it with driver-private state should use 972 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is 973 * duplicated in a consistent fashion across drivers. 974 * 975 * It is an error to call this hook before &drm_connector.state has been 976 * initialized correctly. 977 * 978 * NOTE: 979 * 980 * If the duplicate state references refcounted resources this hook must 981 * acquire a reference for each of them. The driver must release these 982 * references again in @atomic_destroy_state. 983 * 984 * RETURNS: 985 * 986 * Duplicated atomic state or NULL when the allocation failed. 987 */ 988 struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); 989 990 /** 991 * @atomic_destroy_state: 992 * 993 * Destroy a state duplicated with @atomic_duplicate_state and release 994 * or unreference all resources it references 995 * 996 * This callback is mandatory for atomic drivers. 997 */ 998 void (*atomic_destroy_state)(struct drm_connector *connector, 999 struct drm_connector_state *state); 1000 1001 /** 1002 * @atomic_set_property: 1003 * 1004 * Decode a driver-private property value and store the decoded value 1005 * into the passed-in state structure. Since the atomic core decodes all 1006 * standardized properties (even for extensions beyond the core set of 1007 * properties which might not be implemented by all drivers) this 1008 * requires drivers to subclass the state structure. 1009 * 1010 * Such driver-private properties should really only be implemented for 1011 * truly hardware/vendor specific state. Instead it is preferred to 1012 * standardize atomic extension and decode the properties used to expose 1013 * such an extension in the core. 1014 * 1015 * Do not call this function directly, use 1016 * drm_atomic_connector_set_property() instead. 1017 * 1018 * This callback is optional if the driver does not support any 1019 * driver-private atomic properties. 1020 * 1021 * NOTE: 1022 * 1023 * This function is called in the state assembly phase of atomic 1024 * modesets, which can be aborted for any reason (including on 1025 * userspace's request to just check whether a configuration would be 1026 * possible). Drivers MUST NOT touch any persistent state (hardware or 1027 * software) or data structures except the passed in @state parameter. 1028 * 1029 * Also since userspace controls in which order properties are set this 1030 * function must not do any input validation (since the state update is 1031 * incomplete and hence likely inconsistent). Instead any such input 1032 * validation must be done in the various atomic_check callbacks. 1033 * 1034 * RETURNS: 1035 * 1036 * 0 if the property has been found, -EINVAL if the property isn't 1037 * implemented by the driver (which shouldn't ever happen, the core only 1038 * asks for properties attached to this connector). No other validation 1039 * is allowed by the driver. The core already checks that the property 1040 * value is within the range (integer, valid enum value, ...) the driver 1041 * set when registering the property. 1042 */ 1043 int (*atomic_set_property)(struct drm_connector *connector, 1044 struct drm_connector_state *state, 1045 struct drm_property *property, 1046 uint64_t val); 1047 1048 /** 1049 * @atomic_get_property: 1050 * 1051 * Reads out the decoded driver-private property. This is used to 1052 * implement the GETCONNECTOR IOCTL. 1053 * 1054 * Do not call this function directly, use 1055 * drm_atomic_connector_get_property() instead. 1056 * 1057 * This callback is optional if the driver does not support any 1058 * driver-private atomic properties. 1059 * 1060 * RETURNS: 1061 * 1062 * 0 on success, -EINVAL if the property isn't implemented by the 1063 * driver (which shouldn't ever happen, the core only asks for 1064 * properties attached to this connector). 1065 */ 1066 int (*atomic_get_property)(struct drm_connector *connector, 1067 const struct drm_connector_state *state, 1068 struct drm_property *property, 1069 uint64_t *val); 1070 1071 /** 1072 * @atomic_print_state: 1073 * 1074 * If driver subclasses &struct drm_connector_state, it should implement 1075 * this optional hook for printing additional driver specific state. 1076 * 1077 * Do not call this directly, use drm_atomic_connector_print_state() 1078 * instead. 1079 */ 1080 void (*atomic_print_state)(struct drm_printer *p, 1081 const struct drm_connector_state *state); 1082 }; 1083 1084 /** 1085 * struct drm_cmdline_mode - DRM Mode passed through the kernel command-line 1086 * 1087 * Each connector can have an initial mode with additional options 1088 * passed through the kernel command line. This structure allows to 1089 * express those parameters and will be filled by the command-line 1090 * parser. 1091 */ 1092 struct drm_cmdline_mode { 1093 /** 1094 * @name: 1095 * 1096 * Name of the mode. 1097 */ 1098 char name[DRM_DISPLAY_MODE_LEN]; 1099 1100 /** 1101 * @specified: 1102 * 1103 * Has a mode been read from the command-line? 1104 */ 1105 bool specified; 1106 1107 /** 1108 * @refresh_specified: 1109 * 1110 * Did the mode have a preferred refresh rate? 1111 */ 1112 bool refresh_specified; 1113 1114 /** 1115 * @bpp_specified: 1116 * 1117 * Did the mode have a preferred BPP? 1118 */ 1119 bool bpp_specified; 1120 1121 /** 1122 * @xres: 1123 * 1124 * Active resolution on the X axis, in pixels. 1125 */ 1126 int xres; 1127 1128 /** 1129 * @yres: 1130 * 1131 * Active resolution on the Y axis, in pixels. 1132 */ 1133 int yres; 1134 1135 /** 1136 * @bpp: 1137 * 1138 * Bits per pixels for the mode. 1139 */ 1140 int bpp; 1141 1142 /** 1143 * @refresh: 1144 * 1145 * Refresh rate, in Hertz. 1146 */ 1147 int refresh; 1148 1149 /** 1150 * @rb: 1151 * 1152 * Do we need to use reduced blanking? 1153 */ 1154 bool rb; 1155 1156 /** 1157 * @interlace: 1158 * 1159 * The mode is interlaced. 1160 */ 1161 bool interlace; 1162 1163 /** 1164 * @cvt: 1165 * 1166 * The timings will be calculated using the VESA Coordinated 1167 * Video Timings instead of looking up the mode from a table. 1168 */ 1169 bool cvt; 1170 1171 /** 1172 * @margins: 1173 * 1174 * Add margins to the mode calculation (1.8% of xres rounded 1175 * down to 8 pixels and 1.8% of yres). 1176 */ 1177 bool margins; 1178 1179 /** 1180 * @force: 1181 * 1182 * Ignore the hotplug state of the connector, and force its 1183 * state to one of the DRM_FORCE_* values. 1184 */ 1185 enum drm_connector_force force; 1186 1187 /** 1188 * @rotation_reflection: 1189 * 1190 * Initial rotation and reflection of the mode setup from the 1191 * command line. See DRM_MODE_ROTATE_* and 1192 * DRM_MODE_REFLECT_*. The only rotations supported are 1193 * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180. 1194 */ 1195 unsigned int rotation_reflection; 1196 1197 /** 1198 * @panel_orientation: 1199 * 1200 * drm-connector "panel orientation" property override value, 1201 * DRM_MODE_PANEL_ORIENTATION_UNKNOWN if not set. 1202 */ 1203 enum drm_panel_orientation panel_orientation; 1204 1205 /** 1206 * @tv_margins: TV margins to apply to the mode. 1207 */ 1208 struct drm_connector_tv_margins tv_margins; 1209 }; 1210 1211 /** 1212 * struct drm_connector - central DRM connector control structure 1213 * 1214 * Each connector may be connected to one or more CRTCs, or may be clonable by 1215 * another connector if they can share a CRTC. Each connector also has a specific 1216 * position in the broader display (referred to as a 'screen' though it could 1217 * span multiple monitors). 1218 */ 1219 struct drm_connector { 1220 /** @dev: parent DRM device */ 1221 struct drm_device *dev; 1222 /** @kdev: kernel device for sysfs attributes */ 1223 struct device *kdev; 1224 /** @attr: sysfs attributes */ 1225 struct device_attribute *attr; 1226 1227 /** 1228 * @head: 1229 * 1230 * List of all connectors on a @dev, linked from 1231 * &drm_mode_config.connector_list. Protected by 1232 * &drm_mode_config.connector_list_lock, but please only use 1233 * &drm_connector_list_iter to walk this list. 1234 */ 1235 struct list_head head; 1236 1237 /** @base: base KMS object */ 1238 struct drm_mode_object base; 1239 1240 /** @name: human readable name, can be overwritten by the driver */ 1241 char *name; 1242 1243 /** 1244 * @mutex: Lock for general connector state, but currently only protects 1245 * @registered. Most of the connector state is still protected by 1246 * &drm_mode_config.mutex. 1247 */ 1248 struct mutex mutex; 1249 1250 /** 1251 * @index: Compacted connector index, which matches the position inside 1252 * the mode_config.list for drivers not supporting hot-add/removing. Can 1253 * be used as an array index. It is invariant over the lifetime of the 1254 * connector. 1255 */ 1256 unsigned index; 1257 1258 /** 1259 * @connector_type: 1260 * one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h 1261 */ 1262 int connector_type; 1263 /** @connector_type_id: index into connector type enum */ 1264 int connector_type_id; 1265 /** 1266 * @interlace_allowed: 1267 * Can this connector handle interlaced modes? Only used by 1268 * drm_helper_probe_single_connector_modes() for mode filtering. 1269 */ 1270 bool interlace_allowed; 1271 /** 1272 * @doublescan_allowed: 1273 * Can this connector handle doublescan? Only used by 1274 * drm_helper_probe_single_connector_modes() for mode filtering. 1275 */ 1276 bool doublescan_allowed; 1277 /** 1278 * @stereo_allowed: 1279 * Can this connector handle stereo modes? Only used by 1280 * drm_helper_probe_single_connector_modes() for mode filtering. 1281 */ 1282 bool stereo_allowed; 1283 1284 /** 1285 * @ycbcr_420_allowed : This bool indicates if this connector is 1286 * capable of handling YCBCR 420 output. While parsing the EDID 1287 * blocks it's very helpful to know if the source is capable of 1288 * handling YCBCR 420 outputs. 1289 */ 1290 bool ycbcr_420_allowed; 1291 1292 /** 1293 * @registration_state: Is this connector initializing, exposed 1294 * (registered) with userspace, or unregistered? 1295 * 1296 * Protected by @mutex. 1297 */ 1298 enum drm_connector_registration_state registration_state; 1299 1300 /** 1301 * @modes: 1302 * Modes available on this connector (from fill_modes() + user). 1303 * Protected by &drm_mode_config.mutex. 1304 */ 1305 struct list_head modes; 1306 1307 /** 1308 * @status: 1309 * One of the drm_connector_status enums (connected, not, or unknown). 1310 * Protected by &drm_mode_config.mutex. 1311 */ 1312 enum drm_connector_status status; 1313 1314 /** 1315 * @probed_modes: 1316 * These are modes added by probing with DDC or the BIOS, before 1317 * filtering is applied. Used by the probe helpers. Protected by 1318 * &drm_mode_config.mutex. 1319 */ 1320 struct list_head probed_modes; 1321 1322 /** 1323 * @display_info: Display information is filled from EDID information 1324 * when a display is detected. For non hot-pluggable displays such as 1325 * flat panels in embedded systems, the driver should initialize the 1326 * &drm_display_info.width_mm and &drm_display_info.height_mm fields 1327 * with the physical size of the display. 1328 * 1329 * Protected by &drm_mode_config.mutex. 1330 */ 1331 struct drm_display_info display_info; 1332 1333 /** @funcs: connector control functions */ 1334 const struct drm_connector_funcs *funcs; 1335 1336 /** 1337 * @edid_blob_ptr: DRM property containing EDID if present. Protected by 1338 * &drm_mode_config.mutex. This should be updated only by calling 1339 * drm_connector_update_edid_property(). 1340 */ 1341 struct drm_property_blob *edid_blob_ptr; 1342 1343 /** @properties: property tracking for this connector */ 1344 struct drm_object_properties properties; 1345 1346 /** 1347 * @scaling_mode_property: Optional atomic property to control the 1348 * upscaling. See drm_connector_attach_content_protection_property(). 1349 */ 1350 struct drm_property *scaling_mode_property; 1351 1352 /** 1353 * @vrr_capable_property: Optional property to help userspace 1354 * query hardware support for variable refresh rate on a connector. 1355 * connector. Drivers can add the property to a connector by 1356 * calling drm_connector_attach_vrr_capable_property(). 1357 * 1358 * This should be updated only by calling 1359 * drm_connector_set_vrr_capable_property(). 1360 */ 1361 struct drm_property *vrr_capable_property; 1362 1363 /** 1364 * @colorspace_property: Connector property to set the suitable 1365 * colorspace supported by the sink. 1366 */ 1367 struct drm_property *colorspace_property; 1368 1369 /** 1370 * @path_blob_ptr: 1371 * 1372 * DRM blob property data for the DP MST path property. This should only 1373 * be updated by calling drm_connector_set_path_property(). 1374 */ 1375 struct drm_property_blob *path_blob_ptr; 1376 1377 /** 1378 * @max_bpc_property: Default connector property for the max bpc to be 1379 * driven out of the connector. 1380 */ 1381 struct drm_property *max_bpc_property; 1382 1383 #define DRM_CONNECTOR_POLL_HPD (1 << 0) 1384 #define DRM_CONNECTOR_POLL_CONNECT (1 << 1) 1385 #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) 1386 1387 /** 1388 * @polled: 1389 * 1390 * Connector polling mode, a combination of 1391 * 1392 * DRM_CONNECTOR_POLL_HPD 1393 * The connector generates hotplug events and doesn't need to be 1394 * periodically polled. The CONNECT and DISCONNECT flags must not 1395 * be set together with the HPD flag. 1396 * 1397 * DRM_CONNECTOR_POLL_CONNECT 1398 * Periodically poll the connector for connection. 1399 * 1400 * DRM_CONNECTOR_POLL_DISCONNECT 1401 * Periodically poll the connector for disconnection, without 1402 * causing flickering even when the connector is in use. DACs should 1403 * rarely do this without a lot of testing. 1404 * 1405 * Set to 0 for connectors that don't support connection status 1406 * discovery. 1407 */ 1408 uint8_t polled; 1409 1410 /** 1411 * @dpms: Current dpms state. For legacy drivers the 1412 * &drm_connector_funcs.dpms callback must update this. For atomic 1413 * drivers, this is handled by the core atomic code, and drivers must 1414 * only take &drm_crtc_state.active into account. 1415 */ 1416 int dpms; 1417 1418 /** @helper_private: mid-layer private data */ 1419 const struct drm_connector_helper_funcs *helper_private; 1420 1421 /** @cmdline_mode: mode line parsed from the kernel cmdline for this connector */ 1422 struct drm_cmdline_mode cmdline_mode; 1423 /** @force: a DRM_FORCE_<foo> state for forced mode sets */ 1424 enum drm_connector_force force; 1425 /** @override_edid: has the EDID been overwritten through debugfs for testing? */ 1426 bool override_edid; 1427 /** @epoch_counter: used to detect any other changes in connector, besides status */ 1428 u64 epoch_counter; 1429 1430 /** 1431 * @possible_encoders: Bit mask of encoders that can drive this 1432 * connector, drm_encoder_index() determines the index into the bitfield 1433 * and the bits are set with drm_connector_attach_encoder(). 1434 */ 1435 u32 possible_encoders; 1436 1437 /** 1438 * @encoder: Currently bound encoder driving this connector, if any. 1439 * Only really meaningful for non-atomic drivers. Atomic drivers should 1440 * instead look at &drm_connector_state.best_encoder, and in case they 1441 * need the CRTC driving this output, &drm_connector_state.crtc. 1442 */ 1443 struct drm_encoder *encoder; 1444 1445 #define MAX_ELD_BYTES 128 1446 /** @eld: EDID-like data, if present */ 1447 uint8_t eld[MAX_ELD_BYTES]; 1448 /** @latency_present: AV delay info from ELD, if found */ 1449 bool latency_present[2]; 1450 /** 1451 * @video_latency: Video latency info from ELD, if found. 1452 * [0]: progressive, [1]: interlaced 1453 */ 1454 int video_latency[2]; 1455 /** 1456 * @audio_latency: audio latency info from ELD, if found 1457 * [0]: progressive, [1]: interlaced 1458 */ 1459 int audio_latency[2]; 1460 1461 /** 1462 * @ddc: associated ddc adapter. 1463 * A connector usually has its associated ddc adapter. If a driver uses 1464 * this field, then an appropriate symbolic link is created in connector 1465 * sysfs directory to make it easy for the user to tell which i2c 1466 * adapter is for a particular display. 1467 * 1468 * The field should be set by calling drm_connector_init_with_ddc(). 1469 */ 1470 struct i2c_adapter *ddc; 1471 1472 /** 1473 * @null_edid_counter: track sinks that give us all zeros for the EDID. 1474 * Needed to workaround some HW bugs where we get all 0s 1475 */ 1476 int null_edid_counter; 1477 1478 /** @bad_edid_counter: track sinks that give us an EDID with invalid checksum */ 1479 unsigned bad_edid_counter; 1480 1481 /** 1482 * @edid_corrupt: Indicates whether the last read EDID was corrupt. Used 1483 * in Displayport compliance testing - Displayport Link CTS Core 1.2 1484 * rev1.1 4.2.2.6 1485 */ 1486 bool edid_corrupt; 1487 /** 1488 * @real_edid_checksum: real edid checksum for corrupted edid block. 1489 * Required in Displayport 1.4 compliance testing 1490 * rev1.1 4.2.2.6 1491 */ 1492 u8 real_edid_checksum; 1493 1494 /** @debugfs_entry: debugfs directory for this connector */ 1495 struct dentry *debugfs_entry; 1496 1497 /** 1498 * @state: 1499 * 1500 * Current atomic state for this connector. 1501 * 1502 * This is protected by &drm_mode_config.connection_mutex. Note that 1503 * nonblocking atomic commits access the current connector state without 1504 * taking locks. Either by going through the &struct drm_atomic_state 1505 * pointers, see for_each_oldnew_connector_in_state(), 1506 * for_each_old_connector_in_state() and 1507 * for_each_new_connector_in_state(). Or through careful ordering of 1508 * atomic commit operations as implemented in the atomic helpers, see 1509 * &struct drm_crtc_commit. 1510 */ 1511 struct drm_connector_state *state; 1512 1513 /* DisplayID bits. FIXME: Extract into a substruct? */ 1514 1515 /** 1516 * @tile_blob_ptr: 1517 * 1518 * DRM blob property data for the tile property (used mostly by DP MST). 1519 * This is meant for screens which are driven through separate display 1520 * pipelines represented by &drm_crtc, which might not be running with 1521 * genlocked clocks. For tiled panels which are genlocked, like 1522 * dual-link LVDS or dual-link DSI, the driver should try to not expose 1523 * the tiling and virtualize both &drm_crtc and &drm_plane if needed. 1524 * 1525 * This should only be updated by calling 1526 * drm_connector_set_tile_property(). 1527 */ 1528 struct drm_property_blob *tile_blob_ptr; 1529 1530 /** @has_tile: is this connector connected to a tiled monitor */ 1531 bool has_tile; 1532 /** @tile_group: tile group for the connected monitor */ 1533 struct drm_tile_group *tile_group; 1534 /** @tile_is_single_monitor: whether the tile is one monitor housing */ 1535 bool tile_is_single_monitor; 1536 1537 /** @num_h_tile: number of horizontal tiles in the tile group */ 1538 /** @num_v_tile: number of vertical tiles in the tile group */ 1539 uint8_t num_h_tile, num_v_tile; 1540 /** @tile_h_loc: horizontal location of this tile */ 1541 /** @tile_v_loc: vertical location of this tile */ 1542 uint8_t tile_h_loc, tile_v_loc; 1543 /** @tile_h_size: horizontal size of this tile. */ 1544 /** @tile_v_size: vertical size of this tile. */ 1545 uint16_t tile_h_size, tile_v_size; 1546 1547 /** 1548 * @free_node: 1549 * 1550 * List used only by &drm_connector_list_iter to be able to clean up a 1551 * connector from any context, in conjunction with 1552 * &drm_mode_config.connector_free_work. 1553 */ 1554 struct llist_node free_node; 1555 1556 /** @hdr_sink_metadata: HDR Metadata Information read from sink */ 1557 struct hdr_sink_metadata hdr_sink_metadata; 1558 }; 1559 1560 #define obj_to_connector(x) container_of(x, struct drm_connector, base) 1561 1562 int drm_connector_init(struct drm_device *dev, 1563 struct drm_connector *connector, 1564 const struct drm_connector_funcs *funcs, 1565 int connector_type); 1566 int drm_connector_init_with_ddc(struct drm_device *dev, 1567 struct drm_connector *connector, 1568 const struct drm_connector_funcs *funcs, 1569 int connector_type, 1570 struct i2c_adapter *ddc); 1571 void drm_connector_attach_edid_property(struct drm_connector *connector); 1572 int drm_connector_register(struct drm_connector *connector); 1573 void drm_connector_unregister(struct drm_connector *connector); 1574 int drm_connector_attach_encoder(struct drm_connector *connector, 1575 struct drm_encoder *encoder); 1576 1577 void drm_connector_cleanup(struct drm_connector *connector); 1578 1579 static inline unsigned int drm_connector_index(const struct drm_connector *connector) 1580 { 1581 return connector->index; 1582 } 1583 1584 static inline u32 drm_connector_mask(const struct drm_connector *connector) 1585 { 1586 return 1 << connector->index; 1587 } 1588 1589 /** 1590 * drm_connector_lookup - lookup connector object 1591 * @dev: DRM device 1592 * @file_priv: drm file to check for lease against. 1593 * @id: connector object id 1594 * 1595 * This function looks up the connector object specified by id 1596 * add takes a reference to it. 1597 */ 1598 static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev, 1599 struct drm_file *file_priv, 1600 uint32_t id) 1601 { 1602 struct drm_mode_object *mo; 1603 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CONNECTOR); 1604 return mo ? obj_to_connector(mo) : NULL; 1605 } 1606 1607 /** 1608 * drm_connector_get - acquire a connector reference 1609 * @connector: DRM connector 1610 * 1611 * This function increments the connector's refcount. 1612 */ 1613 static inline void drm_connector_get(struct drm_connector *connector) 1614 { 1615 drm_mode_object_get(&connector->base); 1616 } 1617 1618 /** 1619 * drm_connector_put - release a connector reference 1620 * @connector: DRM connector 1621 * 1622 * This function decrements the connector's reference count and frees the 1623 * object if the reference count drops to zero. 1624 */ 1625 static inline void drm_connector_put(struct drm_connector *connector) 1626 { 1627 drm_mode_object_put(&connector->base); 1628 } 1629 1630 /** 1631 * drm_connector_is_unregistered - has the connector been unregistered from 1632 * userspace? 1633 * @connector: DRM connector 1634 * 1635 * Checks whether or not @connector has been unregistered from userspace. 1636 * 1637 * Returns: 1638 * True if the connector was unregistered, false if the connector is 1639 * registered or has not yet been registered with userspace. 1640 */ 1641 static inline bool 1642 drm_connector_is_unregistered(struct drm_connector *connector) 1643 { 1644 return READ_ONCE(connector->registration_state) == 1645 DRM_CONNECTOR_UNREGISTERED; 1646 } 1647 1648 const char *drm_get_connector_type_name(unsigned int connector_type); 1649 const char *drm_get_connector_status_name(enum drm_connector_status status); 1650 const char *drm_get_subpixel_order_name(enum subpixel_order order); 1651 const char *drm_get_dpms_name(int val); 1652 const char *drm_get_dvi_i_subconnector_name(int val); 1653 const char *drm_get_dvi_i_select_name(int val); 1654 const char *drm_get_tv_subconnector_name(int val); 1655 const char *drm_get_tv_select_name(int val); 1656 const char *drm_get_dp_subconnector_name(int val); 1657 const char *drm_get_content_protection_name(int val); 1658 const char *drm_get_hdcp_content_type_name(int val); 1659 1660 int drm_mode_create_dvi_i_properties(struct drm_device *dev); 1661 void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector); 1662 1663 int drm_mode_create_tv_margin_properties(struct drm_device *dev); 1664 int drm_mode_create_tv_properties(struct drm_device *dev, 1665 unsigned int num_modes, 1666 const char * const modes[]); 1667 void drm_connector_attach_tv_margin_properties(struct drm_connector *conn); 1668 int drm_mode_create_scaling_mode_property(struct drm_device *dev); 1669 int drm_connector_attach_content_type_property(struct drm_connector *dev); 1670 int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, 1671 u32 scaling_mode_mask); 1672 int drm_connector_attach_vrr_capable_property( 1673 struct drm_connector *connector); 1674 int drm_mode_create_aspect_ratio_property(struct drm_device *dev); 1675 int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector); 1676 int drm_mode_create_dp_colorspace_property(struct drm_connector *connector); 1677 int drm_mode_create_content_type_property(struct drm_device *dev); 1678 void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, 1679 const struct drm_connector_state *conn_state); 1680 1681 int drm_mode_create_suggested_offset_properties(struct drm_device *dev); 1682 1683 int drm_connector_set_path_property(struct drm_connector *connector, 1684 const char *path); 1685 int drm_connector_set_tile_property(struct drm_connector *connector); 1686 int drm_connector_update_edid_property(struct drm_connector *connector, 1687 const struct edid *edid); 1688 void drm_connector_set_link_status_property(struct drm_connector *connector, 1689 uint64_t link_status); 1690 void drm_connector_set_vrr_capable_property( 1691 struct drm_connector *connector, bool capable); 1692 int drm_connector_set_panel_orientation( 1693 struct drm_connector *connector, 1694 enum drm_panel_orientation panel_orientation); 1695 int drm_connector_set_panel_orientation_with_quirk( 1696 struct drm_connector *connector, 1697 enum drm_panel_orientation panel_orientation, 1698 int width, int height); 1699 int drm_connector_attach_max_bpc_property(struct drm_connector *connector, 1700 int min, int max); 1701 1702 /** 1703 * struct drm_tile_group - Tile group metadata 1704 * @refcount: reference count 1705 * @dev: DRM device 1706 * @id: tile group id exposed to userspace 1707 * @group_data: Sink-private data identifying this group 1708 * 1709 * @group_data corresponds to displayid vend/prod/serial for external screens 1710 * with an EDID. 1711 */ 1712 struct drm_tile_group { 1713 struct kref refcount; 1714 struct drm_device *dev; 1715 int id; 1716 u8 group_data[8]; 1717 }; 1718 1719 struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, 1720 const char topology[8]); 1721 struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, 1722 const char topology[8]); 1723 void drm_mode_put_tile_group(struct drm_device *dev, 1724 struct drm_tile_group *tg); 1725 1726 /** 1727 * struct drm_connector_list_iter - connector_list iterator 1728 * 1729 * This iterator tracks state needed to be able to walk the connector_list 1730 * within struct drm_mode_config. Only use together with 1731 * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and 1732 * drm_connector_list_iter_next() respectively the convenience macro 1733 * drm_for_each_connector_iter(). 1734 */ 1735 struct drm_connector_list_iter { 1736 /* private: */ 1737 struct drm_device *dev; 1738 struct drm_connector *conn; 1739 }; 1740 1741 void drm_connector_list_iter_begin(struct drm_device *dev, 1742 struct drm_connector_list_iter *iter); 1743 struct drm_connector * 1744 drm_connector_list_iter_next(struct drm_connector_list_iter *iter); 1745 void drm_connector_list_iter_end(struct drm_connector_list_iter *iter); 1746 1747 bool drm_connector_has_possible_encoder(struct drm_connector *connector, 1748 struct drm_encoder *encoder); 1749 1750 /** 1751 * drm_for_each_connector_iter - connector_list iterator macro 1752 * @connector: &struct drm_connector pointer used as cursor 1753 * @iter: &struct drm_connector_list_iter 1754 * 1755 * Note that @connector is only valid within the list body, if you want to use 1756 * @connector after calling drm_connector_list_iter_end() then you need to grab 1757 * your own reference first using drm_connector_get(). 1758 */ 1759 #define drm_for_each_connector_iter(connector, iter) \ 1760 while ((connector = drm_connector_list_iter_next(iter))) 1761 1762 /** 1763 * drm_connector_for_each_possible_encoder - iterate connector's possible encoders 1764 * @connector: &struct drm_connector pointer 1765 * @encoder: &struct drm_encoder pointer used as cursor 1766 */ 1767 #define drm_connector_for_each_possible_encoder(connector, encoder) \ 1768 drm_for_each_encoder_mask(encoder, (connector)->dev, \ 1769 (connector)->possible_encoders) 1770 1771 #endif 1772