1 /****************************************************************************** 2 * 3 * Name: actypes.h - Common data types for the entire ACPI subsystem 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2008, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #ifndef __ACTYPES_H__ 45 #define __ACTYPES_H__ 46 47 /* acpisrc:struct_defs -- for acpisrc conversion */ 48 49 /* 50 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header 51 * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of 52 * 12/2006. 53 */ 54 #ifndef ACPI_MACHINE_WIDTH 55 #error ACPI_MACHINE_WIDTH not defined 56 #endif 57 58 /*! [Begin] no source code translation */ 59 60 /* 61 * Data type ranges 62 * Note: These macros are designed to be compiler independent as well as 63 * working around problems that some 32-bit compilers have with 64-bit 64 * constants. 65 */ 66 #define ACPI_UINT8_MAX (UINT8) (~((UINT8) 0)) /* 0xFF */ 67 #define ACPI_UINT16_MAX (UINT16)(~((UINT16) 0)) /* 0xFFFF */ 68 #define ACPI_UINT32_MAX (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF */ 69 #define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */ 70 #define ACPI_ASCII_MAX 0x7F 71 72 /* 73 * Architecture-specific ACPICA Subsystem Data Types 74 * 75 * The goal of these types is to provide source code portability across 76 * 16-bit, 32-bit, and 64-bit targets. 77 * 78 * 1) The following types are of fixed size for all targets (16/32/64): 79 * 80 * BOOLEAN Logical boolean 81 * 82 * UINT8 8-bit (1 byte) unsigned value 83 * UINT16 16-bit (2 byte) unsigned value 84 * UINT32 32-bit (4 byte) unsigned value 85 * UINT64 64-bit (8 byte) unsigned value 86 * 87 * INT16 16-bit (2 byte) signed value 88 * INT32 32-bit (4 byte) signed value 89 * INT64 64-bit (8 byte) signed value 90 * 91 * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the 92 * compiler-dependent header(s) and were introduced because there is no common 93 * 64-bit integer type across the various compilation models, as shown in 94 * the table below. 95 * 96 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit 97 * char 8 8 8 8 8 8 98 * short 16 16 16 16 16 16 99 * _int32 32 100 * int 32 64 32 32 16 16 101 * long 64 64 32 32 32 32 102 * long long 64 64 103 * pointer 64 64 64 32 32 32 104 * 105 * Note: ILP64 and LP32 are currently not supported. 106 * 107 * 108 * 2) These types represent the native word size of the target mode of the 109 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are 110 * usually used for memory allocation, efficient loop counters, and array 111 * indexes. The types are similar to the size_t type in the C library and are 112 * required because there is no C type that consistently represents the native 113 * data width. ACPI_SIZE is needed because there is no guarantee that a 114 * kernel-level C library is present. 115 * 116 * ACPI_SIZE 16/32/64-bit unsigned value 117 * ACPI_NATIVE_INT 16/32/64-bit signed value 118 * 119 */ 120 121 /******************************************************************************* 122 * 123 * Common types for all compilers, all targets 124 * 125 ******************************************************************************/ 126 127 typedef unsigned char BOOLEAN; 128 typedef unsigned char UINT8; 129 typedef unsigned short UINT16; 130 typedef COMPILER_DEPENDENT_UINT64 UINT64; 131 typedef COMPILER_DEPENDENT_INT64 INT64; 132 133 /*! [End] no source code translation !*/ 134 135 /******************************************************************************* 136 * 137 * Types specific to 64-bit targets 138 * 139 ******************************************************************************/ 140 141 #if ACPI_MACHINE_WIDTH == 64 142 143 /*! [Begin] no source code translation (keep the typedefs as-is) */ 144 145 typedef unsigned int UINT32; 146 typedef int INT32; 147 148 /*! [End] no source code translation !*/ 149 150 typedef s64 acpi_native_int; 151 152 typedef u64 acpi_size; 153 typedef u64 acpi_io_address; 154 typedef u64 acpi_physical_address; 155 156 #define ACPI_MAX_PTR ACPI_UINT64_MAX 157 #define ACPI_SIZE_MAX ACPI_UINT64_MAX 158 159 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ 160 161 /* 162 * In the case of the Itanium Processor Family (IPF), the hardware does not 163 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag 164 * to indicate that special precautions must be taken to avoid alignment faults. 165 * (IA64 or ia64 is currently used by existing compilers to indicate IPF.) 166 * 167 * Note: Em64_t and other X86-64 processors support misaligned transfers, 168 * so there is no need to define this flag. 169 */ 170 #if defined (__IA64__) || defined (__ia64__) 171 #define ACPI_MISALIGNMENT_NOT_SUPPORTED 172 #endif 173 174 /******************************************************************************* 175 * 176 * Types specific to 32-bit targets 177 * 178 ******************************************************************************/ 179 180 #elif ACPI_MACHINE_WIDTH == 32 181 182 /*! [Begin] no source code translation (keep the typedefs as-is) */ 183 184 typedef unsigned int UINT32; 185 typedef int INT32; 186 187 /*! [End] no source code translation !*/ 188 189 typedef s32 acpi_native_int; 190 191 typedef u32 acpi_size; 192 typedef u32 acpi_io_address; 193 typedef u32 acpi_physical_address; 194 195 #define ACPI_MAX_PTR ACPI_UINT32_MAX 196 #define ACPI_SIZE_MAX ACPI_UINT32_MAX 197 198 #else 199 200 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */ 201 202 #error unknown ACPI_MACHINE_WIDTH 203 #endif 204 205 /******************************************************************************* 206 * 207 * OS-dependent types 208 * 209 * If the defaults below are not appropriate for the host system, they can 210 * be defined in the OS-specific header, and this will take precedence. 211 * 212 ******************************************************************************/ 213 214 /* Value returned by acpi_os_get_thread_id */ 215 216 #ifndef acpi_thread_id 217 #define acpi_thread_id acpi_size 218 #endif 219 220 /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */ 221 222 #ifndef acpi_cpu_flags 223 #define acpi_cpu_flags acpi_size 224 #endif 225 226 /* Object returned from acpi_os_create_cache */ 227 228 #ifndef acpi_cache_t 229 #ifdef ACPI_USE_LOCAL_CACHE 230 #define acpi_cache_t struct acpi_memory_list 231 #else 232 #define acpi_cache_t void * 233 #endif 234 #endif 235 236 /* 237 * Synchronization objects - Mutexes, Semaphores, and spin_locks 238 */ 239 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) 240 /* 241 * These macros are used if the host OS does not support a mutex object. 242 * Map the OSL Mutex interfaces to binary semaphores. 243 */ 244 #define acpi_mutex acpi_semaphore 245 #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle) 246 #define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle) 247 #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time) 248 #define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1) 249 #endif 250 251 /* Configurable types for synchronization objects */ 252 253 #ifndef acpi_spinlock 254 #define acpi_spinlock void * 255 #endif 256 257 #ifndef acpi_semaphore 258 #define acpi_semaphore void * 259 #endif 260 261 #ifndef acpi_mutex 262 #define acpi_mutex void * 263 #endif 264 265 /******************************************************************************* 266 * 267 * Compiler-dependent types 268 * 269 * If the defaults below are not appropriate for the host compiler, they can 270 * be defined in the compiler-specific header, and this will take precedence. 271 * 272 ******************************************************************************/ 273 274 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ 275 276 #ifndef acpi_uintptr_t 277 #define acpi_uintptr_t void * 278 #endif 279 280 /* 281 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because 282 * some compilers can catch printf format string problems 283 */ 284 #ifndef ACPI_PRINTF_LIKE 285 #define ACPI_PRINTF_LIKE(c) 286 #endif 287 288 /* 289 * Some compilers complain about unused variables. Sometimes we don't want to 290 * use all the variables (for example, _acpi_module_name). This allows us 291 * to tell the compiler in a per-variable manner that a variable 292 * is unused 293 */ 294 #ifndef ACPI_UNUSED_VAR 295 #define ACPI_UNUSED_VAR 296 #endif 297 298 /* 299 * All ACPICA functions that are available to the rest of the kernel are 300 * tagged with this macro which can be defined as appropriate for the host. 301 */ 302 #ifndef ACPI_EXPORT_SYMBOL 303 #define ACPI_EXPORT_SYMBOL(symbol) 304 #endif 305 306 /****************************************************************************** 307 * 308 * ACPI Specification constants (Do not change unless the specification changes) 309 * 310 *****************************************************************************/ 311 312 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ 313 314 #define ACPI_MAX_GPE_BLOCKS 2 315 316 /* Default ACPI register widths */ 317 318 #define ACPI_GPE_REGISTER_WIDTH 8 319 #define ACPI_PM1_REGISTER_WIDTH 16 320 #define ACPI_PM2_REGISTER_WIDTH 8 321 #define ACPI_PM_TIMER_WIDTH 32 322 323 /* Names within the namespace are 4 bytes long */ 324 325 #define ACPI_NAME_SIZE 4 326 #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ 327 #define ACPI_PATH_SEPARATOR '.' 328 329 /* Sizes for ACPI table headers */ 330 331 #define ACPI_OEM_ID_SIZE 6 332 #define ACPI_OEM_TABLE_ID_SIZE 8 333 334 /* ACPI/PNP hardware IDs */ 335 336 #define PCI_ROOT_HID_STRING "PNP0A03" 337 #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" 338 339 /* PM Timer ticks per second (HZ) */ 340 341 #define PM_TIMER_FREQUENCY 3579545 342 343 /******************************************************************************* 344 * 345 * Independent types 346 * 347 ******************************************************************************/ 348 349 /* Logical defines and NULL */ 350 351 #ifdef FALSE 352 #undef FALSE 353 #endif 354 #define FALSE (1 == 0) 355 356 #ifdef TRUE 357 #undef TRUE 358 #endif 359 #define TRUE (1 == 1) 360 361 #ifndef NULL 362 #define NULL (void *) 0 363 #endif 364 365 /* 366 * Miscellaneous types 367 */ 368 typedef u32 acpi_status; /* All ACPI Exceptions */ 369 typedef u32 acpi_name; /* 4-byte ACPI name */ 370 typedef char *acpi_string; /* Null terminated ASCII string */ 371 typedef void *acpi_handle; /* Actually a ptr to a NS Node */ 372 373 /* Owner IDs are used to track namespace nodes for selective deletion */ 374 375 typedef u8 acpi_owner_id; 376 #define ACPI_OWNER_ID_MAX 0xFF 377 378 struct uint64_struct { 379 u32 lo; 380 u32 hi; 381 }; 382 383 union uint64_overlay { 384 u64 full; 385 struct uint64_struct part; 386 }; 387 388 struct uint32_struct { 389 u32 lo; 390 u32 hi; 391 }; 392 393 /* 394 * Acpi integer width. In ACPI version 1, integers are 32 bits. In ACPI 395 * version 2, integers are 64 bits. Note that this pertains to the ACPI integer 396 * type only, not other integers used in the implementation of the ACPI CA 397 * subsystem. 398 */ 399 typedef unsigned long long acpi_integer; 400 #define ACPI_INTEGER_MAX ACPI_UINT64_MAX 401 #define ACPI_INTEGER_BIT_SIZE 64 402 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ 403 404 #if ACPI_MACHINE_WIDTH == 64 405 #define ACPI_USE_NATIVE_DIVIDE /* Use compiler native 64-bit divide */ 406 #endif 407 408 #define ACPI_MAX64_DECIMAL_DIGITS 20 409 #define ACPI_MAX32_DECIMAL_DIGITS 10 410 #define ACPI_MAX16_DECIMAL_DIGITS 5 411 #define ACPI_MAX8_DECIMAL_DIGITS 3 412 413 /* PM Timer ticks per second (HZ) */ 414 415 #define PM_TIMER_FREQUENCY 3579545 416 417 /* 418 * Constants with special meanings 419 */ 420 #define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR) 421 #define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */ 422 #define ACPI_DO_NOT_WAIT 0 423 424 /******************************************************************************* 425 * 426 * Commonly used macros 427 * 428 ******************************************************************************/ 429 430 /* Data manipulation */ 431 432 #define ACPI_LOBYTE(integer) ((u8) (u16)(integer)) 433 #define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8)) 434 #define ACPI_LOWORD(integer) ((u16) (u32)(integer)) 435 #define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16)) 436 #define ACPI_LODWORD(integer64) ((u32) (u64)(integer64)) 437 #define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32)) 438 439 #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) 440 #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) 441 #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) 442 #define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) 443 444 /* Size calculation */ 445 446 #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) 447 448 /* Pointer manipulation */ 449 450 #define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) 451 #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) 452 #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) 453 #define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))) 454 455 /* Pointer/Integer type conversions */ 456 457 #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i) 458 #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) 459 #define ACPI_OFFSET(d, f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL) 460 #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) 461 #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) 462 463 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 464 #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) 465 #else 466 #define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) 467 #endif 468 469 /******************************************************************************* 470 * 471 * Miscellaneous constants 472 * 473 ******************************************************************************/ 474 475 /* 476 * Initialization sequence 477 */ 478 #define ACPI_FULL_INITIALIZATION 0x00 479 #define ACPI_NO_ADDRESS_SPACE_INIT 0x01 480 #define ACPI_NO_HARDWARE_INIT 0x02 481 #define ACPI_NO_EVENT_INIT 0x04 482 #define ACPI_NO_HANDLER_INIT 0x08 483 #define ACPI_NO_ACPI_ENABLE 0x10 484 #define ACPI_NO_DEVICE_INIT 0x20 485 #define ACPI_NO_OBJECT_INIT 0x40 486 487 /* 488 * Initialization state 489 */ 490 #define ACPI_SUBSYSTEM_INITIALIZE 0x01 491 #define ACPI_INITIALIZED_OK 0x02 492 493 /* 494 * Power state values 495 */ 496 #define ACPI_STATE_UNKNOWN (u8) 0xFF 497 498 #define ACPI_STATE_S0 (u8) 0 499 #define ACPI_STATE_S1 (u8) 1 500 #define ACPI_STATE_S2 (u8) 2 501 #define ACPI_STATE_S3 (u8) 3 502 #define ACPI_STATE_S4 (u8) 4 503 #define ACPI_STATE_S5 (u8) 5 504 #define ACPI_S_STATES_MAX ACPI_STATE_S5 505 #define ACPI_S_STATE_COUNT 6 506 507 #define ACPI_STATE_D0 (u8) 0 508 #define ACPI_STATE_D1 (u8) 1 509 #define ACPI_STATE_D2 (u8) 2 510 #define ACPI_STATE_D3 (u8) 3 511 #define ACPI_D_STATES_MAX ACPI_STATE_D3 512 #define ACPI_D_STATE_COUNT 4 513 514 #define ACPI_STATE_C0 (u8) 0 515 #define ACPI_STATE_C1 (u8) 1 516 #define ACPI_STATE_C2 (u8) 2 517 #define ACPI_STATE_C3 (u8) 3 518 #define ACPI_C_STATES_MAX ACPI_STATE_C3 519 #define ACPI_C_STATE_COUNT 4 520 521 /* 522 * Sleep type invalid value 523 */ 524 #define ACPI_SLEEP_TYPE_MAX 0x7 525 #define ACPI_SLEEP_TYPE_INVALID 0xFF 526 527 /* 528 * Standard notify values 529 */ 530 #define ACPI_NOTIFY_BUS_CHECK (u8) 0x00 531 #define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01 532 #define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02 533 #define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03 534 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04 535 #define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05 536 #define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06 537 #define ACPI_NOTIFY_POWER_FAULT (u8) 0x07 538 #define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08 539 #define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09 540 #define ACPI_NOTIFY_RESERVED (u8) 0x0A 541 #define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B 542 543 #define ACPI_NOTIFY_MAX 0x0B 544 545 /* 546 * Types associated with ACPI names and objects. The first group of 547 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition 548 * of the ACPI object_type() operator (See the ACPI Spec). Therefore, 549 * only add to the first group if the spec changes. 550 * 551 * NOTE: Types must be kept in sync with the global acpi_ns_properties 552 * and acpi_ns_type_names arrays. 553 */ 554 typedef u32 acpi_object_type; 555 556 #define ACPI_TYPE_ANY 0x00 557 #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ 558 #define ACPI_TYPE_STRING 0x02 559 #define ACPI_TYPE_BUFFER 0x03 560 #define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */ 561 #define ACPI_TYPE_FIELD_UNIT 0x05 562 #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ 563 #define ACPI_TYPE_EVENT 0x07 564 #define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */ 565 #define ACPI_TYPE_MUTEX 0x09 566 #define ACPI_TYPE_REGION 0x0A 567 #define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */ 568 #define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */ 569 #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ 570 #define ACPI_TYPE_BUFFER_FIELD 0x0E 571 #define ACPI_TYPE_DDB_HANDLE 0x0F 572 #define ACPI_TYPE_DEBUG_OBJECT 0x10 573 574 #define ACPI_TYPE_EXTERNAL_MAX 0x10 575 576 /* 577 * These are object types that do not map directly to the ACPI 578 * object_type() operator. They are used for various internal purposes only. 579 * If new predefined ACPI_TYPEs are added (via the ACPI specification), these 580 * internal types must move upwards. (There is code that depends on these 581 * values being contiguous with the external types above.) 582 */ 583 #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 584 #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 585 #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 586 #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */ 587 #define ACPI_TYPE_LOCAL_ALIAS 0x15 588 #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 589 #define ACPI_TYPE_LOCAL_NOTIFY 0x17 590 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 591 #define ACPI_TYPE_LOCAL_RESOURCE 0x19 592 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A 593 #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */ 594 595 #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ 596 597 /* 598 * These are special object types that never appear in 599 * a Namespace node, only in a union acpi_operand_object 600 */ 601 #define ACPI_TYPE_LOCAL_EXTRA 0x1C 602 #define ACPI_TYPE_LOCAL_DATA 0x1D 603 604 #define ACPI_TYPE_LOCAL_MAX 0x1D 605 606 /* All types above here are invalid */ 607 608 #define ACPI_TYPE_INVALID 0x1E 609 #define ACPI_TYPE_NOT_FOUND 0xFF 610 611 #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) 612 613 /* 614 * All I/O 615 */ 616 #define ACPI_READ 0 617 #define ACPI_WRITE 1 618 #define ACPI_IO_MASK 1 619 620 /* 621 * Event Types: Fixed & General Purpose 622 */ 623 typedef u32 acpi_event_type; 624 625 /* 626 * Fixed events 627 */ 628 #define ACPI_EVENT_PMTIMER 0 629 #define ACPI_EVENT_GLOBAL 1 630 #define ACPI_EVENT_POWER_BUTTON 2 631 #define ACPI_EVENT_SLEEP_BUTTON 3 632 #define ACPI_EVENT_RTC 4 633 #define ACPI_EVENT_MAX 4 634 #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 635 636 /* 637 * Event Status - Per event 638 * ------------- 639 * The encoding of acpi_event_status is illustrated below. 640 * Note that a set bit (1) indicates the property is TRUE 641 * (e.g. if bit 0 is set then the event is enabled). 642 * +-------------+-+-+-+ 643 * | Bits 31:3 |2|1|0| 644 * +-------------+-+-+-+ 645 * | | | | 646 * | | | +- Enabled? 647 * | | +--- Enabled for wake? 648 * | +----- Set? 649 * +----------- <Reserved> 650 */ 651 typedef u32 acpi_event_status; 652 653 #define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00 654 #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01 655 #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02 656 #define ACPI_EVENT_FLAG_SET (acpi_event_status) 0x04 657 #define ACPI_EVENT_FLAG_HANDLE (acpi_event_status) 0x08 658 659 /* 660 * General Purpose Events (GPE) 661 */ 662 #define ACPI_GPE_INVALID 0xFF 663 #define ACPI_GPE_MAX 0xFF 664 #define ACPI_NUM_GPE 256 665 666 #define ACPI_GPE_ENABLE 0 667 #define ACPI_GPE_DISABLE 1 668 669 /* 670 * GPE info flags - Per GPE 671 * +-+-+-+---+---+-+ 672 * |7|6|5|4:3|2:1|0| 673 * +-+-+-+---+---+-+ 674 * | | | | | | 675 * | | | | | +--- Interrupt type: Edge or Level Triggered 676 * | | | | +--- Type: Wake-only, Runtime-only, or wake/runtime 677 * | | | +--- Type of dispatch -- to method, handler, or none 678 * | | +--- Enabled for runtime? 679 * | +--- Enabled for wake? 680 * +--- Unused 681 */ 682 #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01 683 #define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x01 684 #define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00 685 686 #define ACPI_GPE_TYPE_MASK (u8) 0x06 687 #define ACPI_GPE_TYPE_WAKE_RUN (u8) 0x06 688 #define ACPI_GPE_TYPE_WAKE (u8) 0x02 689 #define ACPI_GPE_TYPE_RUNTIME (u8) 0x04 /* Default */ 690 691 #define ACPI_GPE_DISPATCH_MASK (u8) 0x18 692 #define ACPI_GPE_DISPATCH_HANDLER (u8) 0x08 693 #define ACPI_GPE_DISPATCH_METHOD (u8) 0x10 694 #define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00 /* Default */ 695 696 #define ACPI_GPE_RUN_ENABLE_MASK (u8) 0x20 697 #define ACPI_GPE_RUN_ENABLED (u8) 0x20 698 #define ACPI_GPE_RUN_DISABLED (u8) 0x00 /* Default */ 699 700 #define ACPI_GPE_WAKE_ENABLE_MASK (u8) 0x40 701 #define ACPI_GPE_WAKE_ENABLED (u8) 0x40 702 #define ACPI_GPE_WAKE_DISABLED (u8) 0x00 /* Default */ 703 704 #define ACPI_GPE_ENABLE_MASK (u8) 0x60 /* Both run/wake */ 705 706 /* 707 * Flags for GPE and Lock interfaces 708 */ 709 #define ACPI_EVENT_WAKE_ENABLE 0x2 /* acpi_gpe_enable */ 710 #define ACPI_EVENT_WAKE_DISABLE 0x2 /* acpi_gpe_disable */ 711 712 #define ACPI_NOT_ISR 0x1 713 #define ACPI_ISR 0x0 714 715 /* Notify types */ 716 717 #define ACPI_SYSTEM_NOTIFY 0x1 718 #define ACPI_DEVICE_NOTIFY 0x2 719 #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) 720 #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 721 722 #define ACPI_MAX_SYS_NOTIFY 0x7f 723 724 /* Address Space (Operation Region) Types */ 725 726 typedef u8 acpi_adr_space_type; 727 728 #define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0 729 #define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1 730 #define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2 731 #define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3 732 #define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4 733 #define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5 734 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6 735 #define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 7 736 #define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 127 737 738 /* 739 * bit_register IDs 740 * 741 * These values are intended to be used by the hardware interfaces 742 * and are mapped to individual bitfields defined within the ACPI 743 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c 744 * for this mapping. 745 */ 746 747 /* PM1 Status register */ 748 749 #define ACPI_BITREG_TIMER_STATUS 0x00 750 #define ACPI_BITREG_BUS_MASTER_STATUS 0x01 751 #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 752 #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 753 #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 754 #define ACPI_BITREG_RT_CLOCK_STATUS 0x05 755 #define ACPI_BITREG_WAKE_STATUS 0x06 756 #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 757 758 /* PM1 Enable register */ 759 760 #define ACPI_BITREG_TIMER_ENABLE 0x08 761 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 762 #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A 763 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B 764 #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C 765 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D 766 767 /* PM1 Control register */ 768 769 #define ACPI_BITREG_SCI_ENABLE 0x0E 770 #define ACPI_BITREG_BUS_MASTER_RLD 0x0F 771 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 772 #define ACPI_BITREG_SLEEP_TYPE 0x11 773 #define ACPI_BITREG_SLEEP_ENABLE 0x12 774 775 /* PM2 Control register */ 776 777 #define ACPI_BITREG_ARB_DISABLE 0x13 778 779 #define ACPI_BITREG_MAX 0x13 780 #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 781 782 /* Status register values. A 1 clears a status bit. 0 = no effect */ 783 784 #define ACPI_CLEAR_STATUS 1 785 786 /* Enable and Control register values */ 787 788 #define ACPI_ENABLE_EVENT 1 789 #define ACPI_DISABLE_EVENT 0 790 791 /* 792 * External ACPI object definition 793 */ 794 795 /* 796 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element 797 * or an unresolved named reference. 798 */ 799 union acpi_object { 800 acpi_object_type type; /* See definition of acpi_ns_type for values */ 801 struct { 802 acpi_object_type type; /* ACPI_TYPE_INTEGER */ 803 acpi_integer value; /* The actual number */ 804 } integer; 805 806 struct { 807 acpi_object_type type; /* ACPI_TYPE_STRING */ 808 u32 length; /* # of bytes in string, excluding trailing null */ 809 char *pointer; /* points to the string value */ 810 } string; 811 812 struct { 813 acpi_object_type type; /* ACPI_TYPE_BUFFER */ 814 u32 length; /* # of bytes in buffer */ 815 u8 *pointer; /* points to the buffer */ 816 } buffer; 817 818 struct { 819 acpi_object_type type; /* ACPI_TYPE_PACKAGE */ 820 u32 count; /* # of elements in package */ 821 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */ 822 } package; 823 824 struct { 825 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */ 826 acpi_object_type actual_type; /* Type associated with the Handle */ 827 acpi_handle handle; /* object reference */ 828 } reference; 829 830 struct { 831 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */ 832 u32 proc_id; 833 acpi_io_address pblk_address; 834 u32 pblk_length; 835 } processor; 836 837 struct { 838 acpi_object_type type; /* ACPI_TYPE_POWER */ 839 u32 system_level; 840 u32 resource_order; 841 } power_resource; 842 }; 843 844 /* 845 * List of objects, used as a parameter list for control method evaluation 846 */ 847 struct acpi_object_list { 848 u32 count; 849 union acpi_object *pointer; 850 }; 851 852 /* 853 * Miscellaneous common Data Structures used by the interfaces 854 */ 855 #define ACPI_NO_BUFFER 0 856 #define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) 857 #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) 858 859 struct acpi_buffer { 860 acpi_size length; /* Length in bytes of the buffer */ 861 void *pointer; /* pointer to buffer */ 862 }; 863 864 /* 865 * name_type for acpi_get_name 866 */ 867 #define ACPI_FULL_PATHNAME 0 868 #define ACPI_SINGLE_NAME 1 869 #define ACPI_NAME_TYPE_MAX 1 870 871 /* 872 * Predefined Namespace items 873 */ 874 struct acpi_predefined_names { 875 char *name; 876 u8 type; 877 char *val; 878 }; 879 880 /* 881 * Structure and flags for acpi_get_system_info 882 */ 883 #define ACPI_SYS_MODE_UNKNOWN 0x0000 884 #define ACPI_SYS_MODE_ACPI 0x0001 885 #define ACPI_SYS_MODE_LEGACY 0x0002 886 #define ACPI_SYS_MODES_MASK 0x0003 887 888 /* 889 * System info returned by acpi_get_system_info() 890 */ 891 struct acpi_system_info { 892 u32 acpi_ca_version; 893 u32 flags; 894 u32 timer_resolution; 895 u32 reserved1; 896 u32 reserved2; 897 u32 debug_level; 898 u32 debug_layer; 899 }; 900 901 /* Table Event Types */ 902 903 #define ACPI_TABLE_EVENT_LOAD 0x0 904 #define ACPI_TABLE_EVENT_UNLOAD 0x1 905 #define ACPI_NUM_TABLE_EVENTS 2 906 907 /* 908 * Types specific to the OS service interfaces 909 */ 910 typedef u32(ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context); 911 912 typedef void 913 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context); 914 915 /* 916 * Various handlers and callback procedures 917 */ 918 typedef u32(*acpi_event_handler) (void *context); 919 920 typedef 921 void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context); 922 923 typedef 924 void (*acpi_object_handler) (acpi_handle object, u32 function, void *data); 925 926 typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function); 927 928 #define ACPI_INIT_DEVICE_INI 1 929 930 typedef 931 acpi_status(*acpi_exception_handler) (acpi_status aml_status, 932 acpi_name name, 933 u16 opcode, 934 u32 aml_offset, void *context); 935 936 /* Table Event handler (Load, load_table, etc.) and types */ 937 938 typedef 939 acpi_status(*acpi_tbl_handler) (u32 event, void *table, void *context); 940 941 /* Address Spaces (For Operation Regions) */ 942 943 typedef 944 acpi_status(*acpi_adr_space_handler) (u32 function, 945 acpi_physical_address address, 946 u32 bit_width, 947 acpi_integer * value, 948 void *handler_context, 949 void *region_context); 950 951 #define ACPI_DEFAULT_HANDLER NULL 952 953 typedef 954 acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle, 955 u32 function, 956 void *handler_context, 957 void **region_context); 958 959 #define ACPI_REGION_ACTIVATE 0 960 #define ACPI_REGION_DEACTIVATE 1 961 962 typedef 963 acpi_status(*acpi_walk_callback) (acpi_handle obj_handle, 964 u32 nesting_level, 965 void *context, void **return_value); 966 967 /* Interrupt handler return values */ 968 969 #define ACPI_INTERRUPT_NOT_HANDLED 0x00 970 #define ACPI_INTERRUPT_HANDLED 0x01 971 972 /* Length of _HID, _UID, _CID, and UUID values */ 973 974 #define ACPI_DEVICE_ID_LENGTH 0x09 975 #define ACPI_MAX_CID_LENGTH 48 976 #define ACPI_UUID_LENGTH 16 977 978 /* Common string version of device HIDs and UIDs */ 979 980 struct acpica_device_id { 981 char value[ACPI_DEVICE_ID_LENGTH]; 982 }; 983 984 /* Common string version of device CIDs */ 985 986 struct acpi_compatible_id { 987 char value[ACPI_MAX_CID_LENGTH]; 988 }; 989 990 struct acpi_compatible_id_list { 991 u32 count; 992 u32 size; 993 struct acpi_compatible_id id[1]; 994 }; 995 996 /* Structure and flags for acpi_get_object_info */ 997 998 #define ACPI_VALID_STA 0x0001 999 #define ACPI_VALID_ADR 0x0002 1000 #define ACPI_VALID_HID 0x0004 1001 #define ACPI_VALID_UID 0x0008 1002 #define ACPI_VALID_CID 0x0010 1003 #define ACPI_VALID_SXDS 0x0020 1004 1005 /* Flags for _STA method */ 1006 1007 #define ACPI_STA_DEVICE_PRESENT 0x01 1008 #define ACPI_STA_DEVICE_ENABLED 0x02 1009 #define ACPI_STA_DEVICE_UI 0x04 1010 #define ACPI_STA_DEVICE_FUNCTIONING 0x08 1011 #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ 1012 #define ACPI_STA_BATTERY_PRESENT 0x10 1013 1014 #define ACPI_COMMON_OBJ_INFO \ 1015 acpi_object_type type; /* ACPI object type */ \ 1016 acpi_name name /* ACPI object Name */ 1017 1018 struct acpi_obj_info_header { 1019 ACPI_COMMON_OBJ_INFO; 1020 }; 1021 1022 /* Structure returned from Get Object Info */ 1023 1024 struct acpi_device_info { 1025 ACPI_COMMON_OBJ_INFO; 1026 1027 u32 param_count; /* If a method, required parameter count */ 1028 u32 valid; /* Indicates which fields below are valid */ 1029 u32 current_status; /* _STA value */ 1030 acpi_integer address; /* _ADR value if any */ 1031 struct acpica_device_id hardware_id; /* _HID value if any */ 1032 struct acpica_device_id unique_id; /* _UID value if any */ 1033 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */ 1034 struct acpi_compatible_id_list compatibility_id; /* List of _CIDs if any */ 1035 }; 1036 1037 /* Context structs for address space handlers */ 1038 1039 struct acpi_pci_id { 1040 u16 segment; 1041 u16 bus; 1042 u16 device; 1043 u16 function; 1044 }; 1045 1046 struct acpi_mem_space_context { 1047 u32 length; 1048 acpi_physical_address address; 1049 acpi_physical_address mapped_physical_address; 1050 u8 *mapped_logical_address; 1051 acpi_size mapped_length; 1052 }; 1053 1054 /* 1055 * struct acpi_memory_list is used only if the ACPICA local cache is enabled 1056 */ 1057 struct acpi_memory_list { 1058 char *list_name; 1059 void *list_head; 1060 u16 object_size; 1061 u16 max_depth; 1062 u16 current_depth; 1063 u16 link_offset; 1064 1065 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 1066 1067 /* Statistics for debug memory tracking only */ 1068 1069 u32 total_allocated; 1070 u32 total_freed; 1071 u32 max_occupied; 1072 u32 total_size; 1073 u32 current_total_size; 1074 u32 requests; 1075 u32 hits; 1076 #endif 1077 }; 1078 1079 #endif /* __ACTYPES_H__ */ 1080