1 /****************************************************************************** 2 * 3 * Name: actypes.h - Common data types for the entire ACPI subsystem 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2013, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #ifndef __ACTYPES_H__ 45 #define __ACTYPES_H__ 46 47 /* acpisrc:struct_defs -- for acpisrc conversion */ 48 49 /* 50 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header 51 * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of 52 * 12/2006. 53 */ 54 #ifndef ACPI_MACHINE_WIDTH 55 #error ACPI_MACHINE_WIDTH not defined 56 #endif 57 58 /*! [Begin] no source code translation */ 59 60 /* 61 * Data type ranges 62 * Note: These macros are designed to be compiler independent as well as 63 * working around problems that some 32-bit compilers have with 64-bit 64 * constants. 65 */ 66 #define ACPI_UINT8_MAX (UINT8) (~((UINT8) 0)) /* 0xFF */ 67 #define ACPI_UINT16_MAX (UINT16)(~((UINT16) 0)) /* 0xFFFF */ 68 #define ACPI_UINT32_MAX (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF */ 69 #define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */ 70 #define ACPI_ASCII_MAX 0x7F 71 72 /* 73 * Architecture-specific ACPICA Subsystem Data Types 74 * 75 * The goal of these types is to provide source code portability across 76 * 16-bit, 32-bit, and 64-bit targets. 77 * 78 * 1) The following types are of fixed size for all targets (16/32/64): 79 * 80 * BOOLEAN Logical boolean 81 * 82 * UINT8 8-bit (1 byte) unsigned value 83 * UINT16 16-bit (2 byte) unsigned value 84 * UINT32 32-bit (4 byte) unsigned value 85 * UINT64 64-bit (8 byte) unsigned value 86 * 87 * INT16 16-bit (2 byte) signed value 88 * INT32 32-bit (4 byte) signed value 89 * INT64 64-bit (8 byte) signed value 90 * 91 * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the 92 * compiler-dependent header(s) and were introduced because there is no common 93 * 64-bit integer type across the various compilation models, as shown in 94 * the table below. 95 * 96 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit 97 * char 8 8 8 8 8 8 98 * short 16 16 16 16 16 16 99 * _int32 32 100 * int 32 64 32 32 16 16 101 * long 64 64 32 32 32 32 102 * long long 64 64 103 * pointer 64 64 64 32 32 32 104 * 105 * Note: ILP64 and LP32 are currently not supported. 106 * 107 * 108 * 2) These types represent the native word size of the target mode of the 109 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are 110 * usually used for memory allocation, efficient loop counters, and array 111 * indexes. The types are similar to the size_t type in the C library and are 112 * required because there is no C type that consistently represents the native 113 * data width. ACPI_SIZE is needed because there is no guarantee that a 114 * kernel-level C library is present. 115 * 116 * ACPI_SIZE 16/32/64-bit unsigned value 117 * ACPI_NATIVE_INT 16/32/64-bit signed value 118 */ 119 120 /******************************************************************************* 121 * 122 * Common types for all compilers, all targets 123 * 124 ******************************************************************************/ 125 126 typedef unsigned char BOOLEAN; 127 typedef unsigned char UINT8; 128 typedef unsigned short UINT16; 129 typedef COMPILER_DEPENDENT_UINT64 UINT64; 130 typedef COMPILER_DEPENDENT_INT64 INT64; 131 132 /*! [End] no source code translation !*/ 133 134 /* 135 * Value returned by acpi_os_get_thread_id. There is no standard "thread_id" 136 * across operating systems or even the various UNIX systems. Since ACPICA 137 * only needs the thread ID as a unique thread identifier, we use a u64 138 * as the only common data type - it will accommodate any type of pointer or 139 * any type of integer. It is up to the host-dependent OSL to cast the 140 * native thread ID type to a u64 (in acpi_os_get_thread_id). 141 */ 142 #define acpi_thread_id u64 143 144 /******************************************************************************* 145 * 146 * Types specific to 64-bit targets 147 * 148 ******************************************************************************/ 149 150 #if ACPI_MACHINE_WIDTH == 64 151 152 /*! [Begin] no source code translation (keep the typedefs as-is) */ 153 154 typedef unsigned int UINT32; 155 typedef int INT32; 156 157 /*! [End] no source code translation !*/ 158 159 typedef s64 acpi_native_int; 160 161 typedef u64 acpi_size; 162 typedef u64 acpi_io_address; 163 typedef u64 acpi_physical_address; 164 165 #define ACPI_MAX_PTR ACPI_UINT64_MAX 166 #define ACPI_SIZE_MAX ACPI_UINT64_MAX 167 168 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ 169 170 /* 171 * In the case of the Itanium Processor Family (IPF), the hardware does not 172 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag 173 * to indicate that special precautions must be taken to avoid alignment faults. 174 * (IA64 or ia64 is currently used by existing compilers to indicate IPF.) 175 * 176 * Note: EM64T and other X86-64 processors support misaligned transfers, 177 * so there is no need to define this flag. 178 */ 179 #if defined (__IA64__) || defined (__ia64__) 180 #define ACPI_MISALIGNMENT_NOT_SUPPORTED 181 #endif 182 183 /******************************************************************************* 184 * 185 * Types specific to 32-bit targets 186 * 187 ******************************************************************************/ 188 189 #elif ACPI_MACHINE_WIDTH == 32 190 191 /*! [Begin] no source code translation (keep the typedefs as-is) */ 192 193 typedef unsigned int UINT32; 194 typedef int INT32; 195 196 /*! [End] no source code translation !*/ 197 198 typedef s32 acpi_native_int; 199 200 typedef u32 acpi_size; 201 typedef u32 acpi_io_address; 202 typedef u32 acpi_physical_address; 203 204 #define ACPI_MAX_PTR ACPI_UINT32_MAX 205 #define ACPI_SIZE_MAX ACPI_UINT32_MAX 206 207 #else 208 209 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */ 210 211 #error unknown ACPI_MACHINE_WIDTH 212 #endif 213 214 /******************************************************************************* 215 * 216 * OS-dependent types 217 * 218 * If the defaults below are not appropriate for the host system, they can 219 * be defined in the OS-specific header, and this will take precedence. 220 * 221 ******************************************************************************/ 222 223 /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */ 224 225 #ifndef acpi_cpu_flags 226 #define acpi_cpu_flags acpi_size 227 #endif 228 229 /* Object returned from acpi_os_create_cache */ 230 231 #ifndef acpi_cache_t 232 #ifdef ACPI_USE_LOCAL_CACHE 233 #define acpi_cache_t struct acpi_memory_list 234 #else 235 #define acpi_cache_t void * 236 #endif 237 #endif 238 239 /* 240 * Synchronization objects - Mutexes, Semaphores, and spin_locks 241 */ 242 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) 243 /* 244 * These macros are used if the host OS does not support a mutex object. 245 * Map the OSL Mutex interfaces to binary semaphores. 246 */ 247 #define acpi_mutex acpi_semaphore 248 #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle) 249 #define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle) 250 #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time) 251 #define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1) 252 #endif 253 254 /* Configurable types for synchronization objects */ 255 256 #ifndef acpi_spinlock 257 #define acpi_spinlock void * 258 #endif 259 260 #ifndef acpi_semaphore 261 #define acpi_semaphore void * 262 #endif 263 264 #ifndef acpi_mutex 265 #define acpi_mutex void * 266 #endif 267 268 /******************************************************************************* 269 * 270 * Compiler-dependent types 271 * 272 * If the defaults below are not appropriate for the host compiler, they can 273 * be defined in the compiler-specific header, and this will take precedence. 274 * 275 ******************************************************************************/ 276 277 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ 278 279 #ifndef acpi_uintptr_t 280 #define acpi_uintptr_t void * 281 #endif 282 283 /* 284 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because 285 * some compilers can catch printf format string problems 286 */ 287 #ifndef ACPI_PRINTF_LIKE 288 #define ACPI_PRINTF_LIKE(c) 289 #endif 290 291 /* 292 * Some compilers complain about unused variables. Sometimes we don't want to 293 * use all the variables (for example, _acpi_module_name). This allows us 294 * to tell the compiler in a per-variable manner that a variable 295 * is unused 296 */ 297 #ifndef ACPI_UNUSED_VAR 298 #define ACPI_UNUSED_VAR 299 #endif 300 301 /* 302 * All ACPICA external functions that are available to the rest of the kernel 303 * are tagged with thes macros which can be defined as appropriate for the host. 304 * 305 * Notes: 306 * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination 307 * interfaces that may need special processing. 308 * ACPI_EXPORT_SYMBOL is used for all other public external functions. 309 */ 310 #ifndef ACPI_EXPORT_SYMBOL_INIT 311 #define ACPI_EXPORT_SYMBOL_INIT(symbol) 312 #endif 313 314 #ifndef ACPI_EXPORT_SYMBOL 315 #define ACPI_EXPORT_SYMBOL(symbol) 316 #endif 317 318 /* 319 * Compiler/Clibrary-dependent debug initialization. Used for ACPICA 320 * utilities only. 321 */ 322 #ifndef ACPI_DEBUG_INITIALIZE 323 #define ACPI_DEBUG_INITIALIZE() 324 #endif 325 326 /******************************************************************************* 327 * 328 * Configuration 329 * 330 ******************************************************************************/ 331 332 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 333 /* 334 * Memory allocation tracking (used by acpi_exec to detect memory leaks) 335 */ 336 #define ACPI_MEM_PARAMETERS _COMPONENT, _acpi_module_name, __LINE__ 337 #define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS) 338 #define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track ((acpi_size) (a), ACPI_MEM_PARAMETERS) 339 #define ACPI_FREE(a) acpi_ut_free_and_track (a, ACPI_MEM_PARAMETERS) 340 #define ACPI_MEM_TRACKING(a) a 341 342 #else 343 /* 344 * Normal memory allocation directly via the OS services layer 345 */ 346 #define ACPI_ALLOCATE(a) acpi_os_allocate ((acpi_size) (a)) 347 #define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed ((acpi_size) (a)) 348 #define ACPI_FREE(a) acpi_os_free (a) 349 #define ACPI_MEM_TRACKING(a) 350 351 #endif /* ACPI_DBG_TRACK_ALLOCATIONS */ 352 353 /****************************************************************************** 354 * 355 * ACPI Specification constants (Do not change unless the specification changes) 356 * 357 *****************************************************************************/ 358 359 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ 360 361 #define ACPI_MAX_GPE_BLOCKS 2 362 363 /* Default ACPI register widths */ 364 365 #define ACPI_GPE_REGISTER_WIDTH 8 366 #define ACPI_PM1_REGISTER_WIDTH 16 367 #define ACPI_PM2_REGISTER_WIDTH 8 368 #define ACPI_PM_TIMER_WIDTH 32 369 #define ACPI_RESET_REGISTER_WIDTH 8 370 371 /* Names within the namespace are 4 bytes long */ 372 373 #define ACPI_NAME_SIZE 4 374 #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ 375 #define ACPI_PATH_SEPARATOR '.' 376 377 /* Sizes for ACPI table headers */ 378 379 #define ACPI_OEM_ID_SIZE 6 380 #define ACPI_OEM_TABLE_ID_SIZE 8 381 382 /* ACPI/PNP hardware IDs */ 383 384 #define PCI_ROOT_HID_STRING "PNP0A03" 385 #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" 386 387 /* PM Timer ticks per second (HZ) */ 388 389 #define ACPI_PM_TIMER_FREQUENCY 3579545 390 391 /******************************************************************************* 392 * 393 * Independent types 394 * 395 ******************************************************************************/ 396 397 /* Logical defines and NULL */ 398 399 #ifdef FALSE 400 #undef FALSE 401 #endif 402 #define FALSE (1 == 0) 403 404 #ifdef TRUE 405 #undef TRUE 406 #endif 407 #define TRUE (1 == 1) 408 409 #ifndef NULL 410 #define NULL (void *) 0 411 #endif 412 413 /* 414 * Miscellaneous types 415 */ 416 typedef u32 acpi_status; /* All ACPI Exceptions */ 417 typedef u32 acpi_name; /* 4-byte ACPI name */ 418 typedef char *acpi_string; /* Null terminated ASCII string */ 419 typedef void *acpi_handle; /* Actually a ptr to a NS Node */ 420 421 /* Time constants for timer calculations */ 422 423 #define ACPI_MSEC_PER_SEC 1000L 424 425 #define ACPI_USEC_PER_MSEC 1000L 426 #define ACPI_USEC_PER_SEC 1000000L 427 428 #define ACPI_100NSEC_PER_USEC 10L 429 #define ACPI_100NSEC_PER_MSEC 10000L 430 #define ACPI_100NSEC_PER_SEC 10000000L 431 432 #define ACPI_NSEC_PER_USEC 1000L 433 #define ACPI_NSEC_PER_MSEC 1000000L 434 #define ACPI_NSEC_PER_SEC 1000000000L 435 436 /* Owner IDs are used to track namespace nodes for selective deletion */ 437 438 typedef u8 acpi_owner_id; 439 #define ACPI_OWNER_ID_MAX 0xFF 440 441 #define ACPI_INTEGER_BIT_SIZE 64 442 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ 443 444 #if ACPI_MACHINE_WIDTH == 64 445 #define ACPI_USE_NATIVE_DIVIDE /* Use compiler native 64-bit divide */ 446 #endif 447 448 #define ACPI_MAX64_DECIMAL_DIGITS 20 449 #define ACPI_MAX32_DECIMAL_DIGITS 10 450 #define ACPI_MAX16_DECIMAL_DIGITS 5 451 #define ACPI_MAX8_DECIMAL_DIGITS 3 452 453 /* 454 * Constants with special meanings 455 */ 456 #define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR) 457 #define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */ 458 #define ACPI_DO_NOT_WAIT 0 459 460 /* 461 * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits. 462 * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this 463 * pertains to the ACPI integer type only, not to other integers used in the 464 * implementation of the ACPICA subsystem. 465 * 466 * 01/2010: This type is obsolete and has been removed from the entire ACPICA 467 * code base. It remains here for compatibility with device drivers that use 468 * the type. However, it will be removed in the future. 469 */ 470 typedef u64 acpi_integer; 471 #define ACPI_INTEGER_MAX ACPI_UINT64_MAX 472 473 /******************************************************************************* 474 * 475 * Commonly used macros 476 * 477 ******************************************************************************/ 478 479 /* Data manipulation */ 480 481 #define ACPI_LOBYTE(integer) ((u8) (u16)(integer)) 482 #define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8)) 483 #define ACPI_LOWORD(integer) ((u16) (u32)(integer)) 484 #define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16)) 485 #define ACPI_LODWORD(integer64) ((u32) (u64)(integer64)) 486 #define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32)) 487 488 #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) 489 #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) 490 #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) 491 #define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) 492 493 /* Size calculation */ 494 495 #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) 496 497 /* Pointer manipulation */ 498 499 #define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) 500 #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) 501 #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) 502 #define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))) 503 504 /* Pointer/Integer type conversions */ 505 506 #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i) 507 #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) 508 #define ACPI_OFFSET(d, f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL) 509 #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) 510 #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) 511 512 /* Optimizations for 4-character (32-bit) acpi_name manipulation */ 513 514 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 515 #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) 516 #define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src))) 517 #else 518 #define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) 519 #define ACPI_MOVE_NAME(dest,src) (ACPI_STRNCPY (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE)) 520 #endif 521 522 /* Support for the special RSDP signature (8 characters) */ 523 524 #define ACPI_VALIDATE_RSDP_SIG(a) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8)) 525 #define ACPI_MAKE_RSDP_SIG(dest) (ACPI_MEMCPY (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8)) 526 527 /******************************************************************************* 528 * 529 * Miscellaneous constants 530 * 531 ******************************************************************************/ 532 533 /* 534 * Initialization sequence 535 */ 536 #define ACPI_FULL_INITIALIZATION 0x00 537 #define ACPI_NO_ADDRESS_SPACE_INIT 0x01 538 #define ACPI_NO_HARDWARE_INIT 0x02 539 #define ACPI_NO_EVENT_INIT 0x04 540 #define ACPI_NO_HANDLER_INIT 0x08 541 #define ACPI_NO_ACPI_ENABLE 0x10 542 #define ACPI_NO_DEVICE_INIT 0x20 543 #define ACPI_NO_OBJECT_INIT 0x40 544 545 /* 546 * Initialization state 547 */ 548 #define ACPI_SUBSYSTEM_INITIALIZE 0x01 549 #define ACPI_INITIALIZED_OK 0x02 550 551 /* 552 * Power state values 553 */ 554 #define ACPI_STATE_UNKNOWN (u8) 0xFF 555 556 #define ACPI_STATE_S0 (u8) 0 557 #define ACPI_STATE_S1 (u8) 1 558 #define ACPI_STATE_S2 (u8) 2 559 #define ACPI_STATE_S3 (u8) 3 560 #define ACPI_STATE_S4 (u8) 4 561 #define ACPI_STATE_S5 (u8) 5 562 #define ACPI_S_STATES_MAX ACPI_STATE_S5 563 #define ACPI_S_STATE_COUNT 6 564 565 #define ACPI_STATE_D0 (u8) 0 566 #define ACPI_STATE_D1 (u8) 1 567 #define ACPI_STATE_D2 (u8) 2 568 #define ACPI_STATE_D3_HOT (u8) 3 569 #define ACPI_STATE_D3 (u8) 4 570 #define ACPI_STATE_D3_COLD ACPI_STATE_D3 571 #define ACPI_D_STATES_MAX ACPI_STATE_D3 572 #define ACPI_D_STATE_COUNT 5 573 574 #define ACPI_STATE_C0 (u8) 0 575 #define ACPI_STATE_C1 (u8) 1 576 #define ACPI_STATE_C2 (u8) 2 577 #define ACPI_STATE_C3 (u8) 3 578 #define ACPI_C_STATES_MAX ACPI_STATE_C3 579 #define ACPI_C_STATE_COUNT 4 580 581 /* 582 * Sleep type invalid value 583 */ 584 #define ACPI_SLEEP_TYPE_MAX 0x7 585 #define ACPI_SLEEP_TYPE_INVALID 0xFF 586 587 /* 588 * Standard notify values 589 */ 590 #define ACPI_NOTIFY_BUS_CHECK (u8) 0x00 591 #define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01 592 #define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02 593 #define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03 594 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04 595 #define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05 596 #define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06 597 #define ACPI_NOTIFY_POWER_FAULT (u8) 0x07 598 #define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08 599 #define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09 600 #define ACPI_NOTIFY_RESERVED (u8) 0x0A 601 #define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B 602 #define ACPI_NOTIFY_SHUTDOWN_REQUEST (u8) 0x0C 603 604 #define ACPI_NOTIFY_MAX 0x0C 605 606 /* 607 * Types associated with ACPI names and objects. The first group of 608 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition 609 * of the ACPI object_type() operator (See the ACPI Spec). Therefore, 610 * only add to the first group if the spec changes. 611 * 612 * NOTE: Types must be kept in sync with the global acpi_ns_properties 613 * and acpi_ns_type_names arrays. 614 */ 615 typedef u32 acpi_object_type; 616 617 #define ACPI_TYPE_ANY 0x00 618 #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ 619 #define ACPI_TYPE_STRING 0x02 620 #define ACPI_TYPE_BUFFER 0x03 621 #define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */ 622 #define ACPI_TYPE_FIELD_UNIT 0x05 623 #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ 624 #define ACPI_TYPE_EVENT 0x07 625 #define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */ 626 #define ACPI_TYPE_MUTEX 0x09 627 #define ACPI_TYPE_REGION 0x0A 628 #define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */ 629 #define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */ 630 #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ 631 #define ACPI_TYPE_BUFFER_FIELD 0x0E 632 #define ACPI_TYPE_DDB_HANDLE 0x0F 633 #define ACPI_TYPE_DEBUG_OBJECT 0x10 634 635 #define ACPI_TYPE_EXTERNAL_MAX 0x10 636 637 /* 638 * These are object types that do not map directly to the ACPI 639 * object_type() operator. They are used for various internal purposes only. 640 * If new predefined ACPI_TYPEs are added (via the ACPI specification), these 641 * internal types must move upwards. (There is code that depends on these 642 * values being contiguous with the external types above.) 643 */ 644 #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 645 #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 646 #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 647 #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */ 648 #define ACPI_TYPE_LOCAL_ALIAS 0x15 649 #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 650 #define ACPI_TYPE_LOCAL_NOTIFY 0x17 651 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 652 #define ACPI_TYPE_LOCAL_RESOURCE 0x19 653 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A 654 #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */ 655 656 #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ 657 658 /* 659 * These are special object types that never appear in 660 * a Namespace node, only in an object of union acpi_operand_object 661 */ 662 #define ACPI_TYPE_LOCAL_EXTRA 0x1C 663 #define ACPI_TYPE_LOCAL_DATA 0x1D 664 665 #define ACPI_TYPE_LOCAL_MAX 0x1D 666 667 /* All types above here are invalid */ 668 669 #define ACPI_TYPE_INVALID 0x1E 670 #define ACPI_TYPE_NOT_FOUND 0xFF 671 672 #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) 673 674 /* 675 * All I/O 676 */ 677 #define ACPI_READ 0 678 #define ACPI_WRITE 1 679 #define ACPI_IO_MASK 1 680 681 /* 682 * Event Types: Fixed & General Purpose 683 */ 684 typedef u32 acpi_event_type; 685 686 /* 687 * Fixed events 688 */ 689 #define ACPI_EVENT_PMTIMER 0 690 #define ACPI_EVENT_GLOBAL 1 691 #define ACPI_EVENT_POWER_BUTTON 2 692 #define ACPI_EVENT_SLEEP_BUTTON 3 693 #define ACPI_EVENT_RTC 4 694 #define ACPI_EVENT_MAX 4 695 #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 696 697 /* 698 * Event status - Per event 699 * ------------- 700 * The encoding of acpi_event_status is illustrated below. 701 * Note that a set bit (1) indicates the property is TRUE 702 * (e.g. if bit 0 is set then the event is enabled). 703 * +-------------+-+-+-+-+ 704 * | Bits 31:4 |3|2|1|0| 705 * +-------------+-+-+-+-+ 706 * | | | | | 707 * | | | | +- Enabled? 708 * | | | +--- Enabled for wake? 709 * | | +----- Set? 710 * | +------- Has a handler? 711 * +----------- <Reserved> 712 */ 713 typedef u32 acpi_event_status; 714 715 #define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00 716 #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01 717 #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02 718 #define ACPI_EVENT_FLAG_SET (acpi_event_status) 0x04 719 #define ACPI_EVENT_FLAG_HANDLE (acpi_event_status) 0x08 720 721 /* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */ 722 723 #define ACPI_GPE_ENABLE 0 724 #define ACPI_GPE_DISABLE 1 725 #define ACPI_GPE_CONDITIONAL_ENABLE 2 726 727 /* 728 * GPE info flags - Per GPE 729 * +-------+-+-+---+ 730 * | 7:4 |3|2|1:0| 731 * +-------+-+-+---+ 732 * | | | | 733 * | | | +-- Type of dispatch:to method, handler, notify, or none 734 * | | +----- Interrupt type: edge or level triggered 735 * | +------- Is a Wake GPE 736 * +------------ <Reserved> 737 */ 738 #define ACPI_GPE_DISPATCH_NONE (u8) 0x00 739 #define ACPI_GPE_DISPATCH_METHOD (u8) 0x01 740 #define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02 741 #define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03 742 #define ACPI_GPE_DISPATCH_MASK (u8) 0x03 743 744 #define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x04 745 #define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00 746 #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x04 747 748 #define ACPI_GPE_CAN_WAKE (u8) 0x08 749 750 /* 751 * Flags for GPE and Lock interfaces 752 */ 753 #define ACPI_NOT_ISR 0x1 754 #define ACPI_ISR 0x0 755 756 /* Notify types */ 757 758 #define ACPI_SYSTEM_NOTIFY 0x1 759 #define ACPI_DEVICE_NOTIFY 0x2 760 #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) 761 #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 762 #define ACPI_NUM_NOTIFY_TYPES 2 763 764 #define ACPI_MAX_SYS_NOTIFY 0x7F 765 #define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF 766 767 #define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */ 768 #define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */ 769 770 /* Address Space (Operation Region) Types */ 771 772 typedef u8 acpi_adr_space_type; 773 774 #define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0 775 #define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1 776 #define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2 777 #define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3 778 #define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4 779 #define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5 780 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6 781 #define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7 782 #define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8 783 #define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9 784 #define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10 785 786 #define ACPI_NUM_PREDEFINED_REGIONS 11 787 788 /* 789 * Special Address Spaces 790 * 791 * Note: A Data Table region is a special type of operation region 792 * that has its own AML opcode. However, internally, the AML 793 * interpreter simply creates an operation region with an an address 794 * space type of ACPI_ADR_SPACE_DATA_TABLE. 795 */ 796 #define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */ 797 #define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F 798 799 /* Values for _REG connection code */ 800 801 #define ACPI_REG_DISCONNECT 0 802 #define ACPI_REG_CONNECT 1 803 804 /* 805 * bit_register IDs 806 * 807 * These values are intended to be used by the hardware interfaces 808 * and are mapped to individual bitfields defined within the ACPI 809 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c 810 * for this mapping. 811 */ 812 813 /* PM1 Status register */ 814 815 #define ACPI_BITREG_TIMER_STATUS 0x00 816 #define ACPI_BITREG_BUS_MASTER_STATUS 0x01 817 #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 818 #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 819 #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 820 #define ACPI_BITREG_RT_CLOCK_STATUS 0x05 821 #define ACPI_BITREG_WAKE_STATUS 0x06 822 #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 823 824 /* PM1 Enable register */ 825 826 #define ACPI_BITREG_TIMER_ENABLE 0x08 827 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 828 #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A 829 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B 830 #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C 831 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D 832 833 /* PM1 Control register */ 834 835 #define ACPI_BITREG_SCI_ENABLE 0x0E 836 #define ACPI_BITREG_BUS_MASTER_RLD 0x0F 837 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 838 #define ACPI_BITREG_SLEEP_TYPE 0x11 839 #define ACPI_BITREG_SLEEP_ENABLE 0x12 840 841 /* PM2 Control register */ 842 843 #define ACPI_BITREG_ARB_DISABLE 0x13 844 845 #define ACPI_BITREG_MAX 0x13 846 #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 847 848 /* Status register values. A 1 clears a status bit. 0 = no effect */ 849 850 #define ACPI_CLEAR_STATUS 1 851 852 /* Enable and Control register values */ 853 854 #define ACPI_ENABLE_EVENT 1 855 #define ACPI_DISABLE_EVENT 0 856 857 /* Sleep function dispatch */ 858 859 typedef acpi_status(*acpi_sleep_function) (u8 sleep_state); 860 861 struct acpi_sleep_functions { 862 acpi_sleep_function legacy_function; 863 acpi_sleep_function extended_function; 864 }; 865 866 /* 867 * External ACPI object definition 868 */ 869 870 /* 871 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element 872 * or an unresolved named reference. 873 */ 874 union acpi_object { 875 acpi_object_type type; /* See definition of acpi_ns_type for values */ 876 struct { 877 acpi_object_type type; /* ACPI_TYPE_INTEGER */ 878 u64 value; /* The actual number */ 879 } integer; 880 881 struct { 882 acpi_object_type type; /* ACPI_TYPE_STRING */ 883 u32 length; /* # of bytes in string, excluding trailing null */ 884 char *pointer; /* points to the string value */ 885 } string; 886 887 struct { 888 acpi_object_type type; /* ACPI_TYPE_BUFFER */ 889 u32 length; /* # of bytes in buffer */ 890 u8 *pointer; /* points to the buffer */ 891 } buffer; 892 893 struct { 894 acpi_object_type type; /* ACPI_TYPE_PACKAGE */ 895 u32 count; /* # of elements in package */ 896 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */ 897 } package; 898 899 struct { 900 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */ 901 acpi_object_type actual_type; /* Type associated with the Handle */ 902 acpi_handle handle; /* object reference */ 903 } reference; 904 905 struct { 906 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */ 907 u32 proc_id; 908 acpi_io_address pblk_address; 909 u32 pblk_length; 910 } processor; 911 912 struct { 913 acpi_object_type type; /* ACPI_TYPE_POWER */ 914 u32 system_level; 915 u32 resource_order; 916 } power_resource; 917 }; 918 919 /* 920 * List of objects, used as a parameter list for control method evaluation 921 */ 922 struct acpi_object_list { 923 u32 count; 924 union acpi_object *pointer; 925 }; 926 927 /* 928 * Miscellaneous common Data Structures used by the interfaces 929 */ 930 #define ACPI_NO_BUFFER 0 931 #define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) 932 #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) 933 934 struct acpi_buffer { 935 acpi_size length; /* Length in bytes of the buffer */ 936 void *pointer; /* pointer to buffer */ 937 }; 938 939 /* 940 * Free a buffer created in an struct acpi_buffer via ACPI_ALLOCATE_BUFFER. 941 * Note: We use acpi_os_free here because acpi_os_allocate was used to allocate 942 * the buffer. This purposefully bypasses the internal allocation tracking 943 * mechanism (if it is enabled). 944 */ 945 #define ACPI_FREE_BUFFER(b) acpi_os_free((b).pointer) 946 947 /* 948 * name_type for acpi_get_name 949 */ 950 #define ACPI_FULL_PATHNAME 0 951 #define ACPI_SINGLE_NAME 1 952 #define ACPI_NAME_TYPE_MAX 1 953 954 /* 955 * Predefined Namespace items 956 */ 957 struct acpi_predefined_names { 958 char *name; 959 u8 type; 960 char *val; 961 }; 962 963 /* 964 * Structure and flags for acpi_get_system_info 965 */ 966 #define ACPI_SYS_MODE_UNKNOWN 0x0000 967 #define ACPI_SYS_MODE_ACPI 0x0001 968 #define ACPI_SYS_MODE_LEGACY 0x0002 969 #define ACPI_SYS_MODES_MASK 0x0003 970 971 /* 972 * System info returned by acpi_get_system_info() 973 */ 974 struct acpi_system_info { 975 u32 acpi_ca_version; 976 u32 flags; 977 u32 timer_resolution; 978 u32 reserved1; 979 u32 reserved2; 980 u32 debug_level; 981 u32 debug_layer; 982 }; 983 984 /* 985 * System statistics returned by acpi_get_statistics() 986 */ 987 struct acpi_statistics { 988 u32 sci_count; 989 u32 gpe_count; 990 u32 fixed_event_count[ACPI_NUM_FIXED_EVENTS]; 991 u32 method_count; 992 }; 993 994 /* Table Event Types */ 995 996 #define ACPI_TABLE_EVENT_LOAD 0x0 997 #define ACPI_TABLE_EVENT_UNLOAD 0x1 998 #define ACPI_NUM_TABLE_EVENTS 2 999 1000 /* 1001 * Types specific to the OS service interfaces 1002 */ 1003 typedef u32 1004 (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context); 1005 1006 typedef void 1007 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context); 1008 1009 /* 1010 * Various handlers and callback procedures 1011 */ 1012 typedef 1013 u32 (*acpi_sci_handler) (void *context); 1014 1015 typedef 1016 void (*acpi_gbl_event_handler) (u32 event_type, 1017 acpi_handle device, 1018 u32 event_number, void *context); 1019 1020 #define ACPI_EVENT_TYPE_GPE 0 1021 #define ACPI_EVENT_TYPE_FIXED 1 1022 1023 typedef 1024 u32(*acpi_event_handler) (void *context); 1025 1026 typedef 1027 u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context); 1028 1029 typedef 1030 void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context); 1031 1032 typedef 1033 void (*acpi_object_handler) (acpi_handle object, void *data); 1034 1035 typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function); 1036 1037 #define ACPI_INIT_DEVICE_INI 1 1038 1039 typedef 1040 acpi_status(*acpi_exception_handler) (acpi_status aml_status, 1041 acpi_name name, 1042 u16 opcode, 1043 u32 aml_offset, void *context); 1044 1045 /* Table Event handler (Load, load_table, etc.) and types */ 1046 1047 typedef 1048 acpi_status(*acpi_table_handler) (u32 event, void *table, void *context); 1049 1050 #define ACPI_TABLE_LOAD 0x0 1051 #define ACPI_TABLE_UNLOAD 0x1 1052 #define ACPI_NUM_TABLE_EVENTS 2 1053 1054 /* Address Spaces (For Operation Regions) */ 1055 1056 typedef 1057 acpi_status(*acpi_adr_space_handler) (u32 function, 1058 acpi_physical_address address, 1059 u32 bit_width, 1060 u64 *value, 1061 void *handler_context, 1062 void *region_context); 1063 1064 #define ACPI_DEFAULT_HANDLER NULL 1065 1066 /* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */ 1067 1068 struct acpi_connection_info { 1069 u8 *connection; 1070 u16 length; 1071 u8 access_length; 1072 }; 1073 1074 typedef 1075 acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle, 1076 u32 function, 1077 void *handler_context, 1078 void **region_context); 1079 1080 #define ACPI_REGION_ACTIVATE 0 1081 #define ACPI_REGION_DEACTIVATE 1 1082 1083 typedef 1084 acpi_status(*acpi_walk_callback) (acpi_handle object, 1085 u32 nesting_level, 1086 void *context, void **return_value); 1087 1088 typedef 1089 u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported); 1090 1091 /* Interrupt handler return values */ 1092 1093 #define ACPI_INTERRUPT_NOT_HANDLED 0x00 1094 #define ACPI_INTERRUPT_HANDLED 0x01 1095 1096 /* GPE handler return values */ 1097 1098 #define ACPI_REENABLE_GPE 0x80 1099 1100 /* Length of 32-bit EISAID values when converted back to a string */ 1101 1102 #define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */ 1103 1104 /* Length of UUID (string) values */ 1105 1106 #define ACPI_UUID_LENGTH 16 1107 1108 /* Structures used for device/processor HID, UID, CID, and SUB */ 1109 1110 struct acpi_pnp_device_id { 1111 u32 length; /* Length of string + null */ 1112 char *string; 1113 }; 1114 1115 struct acpi_pnp_device_id_list { 1116 u32 count; /* Number of IDs in Ids array */ 1117 u32 list_size; /* Size of list, including ID strings */ 1118 struct acpi_pnp_device_id ids[1]; /* ID array */ 1119 }; 1120 1121 /* 1122 * Structure returned from acpi_get_object_info. 1123 * Optimized for both 32- and 64-bit builds 1124 */ 1125 struct acpi_device_info { 1126 u32 info_size; /* Size of info, including ID strings */ 1127 u32 name; /* ACPI object Name */ 1128 acpi_object_type type; /* ACPI object Type */ 1129 u8 param_count; /* If a method, required parameter count */ 1130 u8 valid; /* Indicates which optional fields are valid */ 1131 u8 flags; /* Miscellaneous info */ 1132 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */ 1133 u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */ 1134 u32 current_status; /* _STA value */ 1135 u64 address; /* _ADR value */ 1136 struct acpi_pnp_device_id hardware_id; /* _HID value */ 1137 struct acpi_pnp_device_id unique_id; /* _UID value */ 1138 struct acpi_pnp_device_id subsystem_id; /* _SUB value */ 1139 struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */ 1140 }; 1141 1142 /* Values for Flags field above (acpi_get_object_info) */ 1143 1144 #define ACPI_PCI_ROOT_BRIDGE 0x01 1145 1146 /* Flags for Valid field above (acpi_get_object_info) */ 1147 1148 #define ACPI_VALID_STA 0x01 1149 #define ACPI_VALID_ADR 0x02 1150 #define ACPI_VALID_HID 0x04 1151 #define ACPI_VALID_UID 0x08 1152 #define ACPI_VALID_SUB 0x10 1153 #define ACPI_VALID_CID 0x20 1154 #define ACPI_VALID_SXDS 0x40 1155 #define ACPI_VALID_SXWS 0x80 1156 1157 /* Flags for _STA return value (current_status above) */ 1158 1159 #define ACPI_STA_DEVICE_PRESENT 0x01 1160 #define ACPI_STA_DEVICE_ENABLED 0x02 1161 #define ACPI_STA_DEVICE_UI 0x04 1162 #define ACPI_STA_DEVICE_FUNCTIONING 0x08 1163 #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ 1164 #define ACPI_STA_BATTERY_PRESENT 0x10 1165 1166 /* Context structs for address space handlers */ 1167 1168 struct acpi_pci_id { 1169 u16 segment; 1170 u16 bus; 1171 u16 device; 1172 u16 function; 1173 }; 1174 1175 struct acpi_mem_space_context { 1176 u32 length; 1177 acpi_physical_address address; 1178 acpi_physical_address mapped_physical_address; 1179 u8 *mapped_logical_address; 1180 acpi_size mapped_length; 1181 }; 1182 1183 /* 1184 * struct acpi_memory_list is used only if the ACPICA local cache is enabled 1185 */ 1186 struct acpi_memory_list { 1187 char *list_name; 1188 void *list_head; 1189 u16 object_size; 1190 u16 max_depth; 1191 u16 current_depth; 1192 1193 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 1194 1195 /* Statistics for debug memory tracking only */ 1196 1197 u32 total_allocated; 1198 u32 total_freed; 1199 u32 max_occupied; 1200 u32 total_size; 1201 u32 current_total_size; 1202 u32 requests; 1203 u32 hits; 1204 #endif 1205 }; 1206 1207 /* Definitions of _OSI support */ 1208 1209 #define ACPI_VENDOR_STRINGS 0x01 1210 #define ACPI_FEATURE_STRINGS 0x02 1211 #define ACPI_ENABLE_INTERFACES 0x00 1212 #define ACPI_DISABLE_INTERFACES 0x04 1213 1214 #define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1215 #define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1216 #define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1217 #define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS) 1218 #define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS) 1219 #define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) 1220 1221 #define ACPI_OSI_WIN_2000 0x01 1222 #define ACPI_OSI_WIN_XP 0x02 1223 #define ACPI_OSI_WIN_XP_SP1 0x03 1224 #define ACPI_OSI_WINSRV_2003 0x04 1225 #define ACPI_OSI_WIN_XP_SP2 0x05 1226 #define ACPI_OSI_WINSRV_2003_SP1 0x06 1227 #define ACPI_OSI_WIN_VISTA 0x07 1228 #define ACPI_OSI_WINSRV_2008 0x08 1229 #define ACPI_OSI_WIN_VISTA_SP1 0x09 1230 #define ACPI_OSI_WIN_VISTA_SP2 0x0A 1231 #define ACPI_OSI_WIN_7 0x0B 1232 #define ACPI_OSI_WIN_8 0x0C 1233 1234 #endif /* __ACTYPES_H__ */ 1235