1 /****************************************************************************** 2 * 3 * Name: actypes.h - Common data types for the entire ACPI subsystem 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2008, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #ifndef __ACTYPES_H__ 45 #define __ACTYPES_H__ 46 47 /* acpisrc:struct_defs -- for acpisrc conversion */ 48 49 /* 50 * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header 51 * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of 52 * 12/2006. 53 */ 54 #ifndef ACPI_MACHINE_WIDTH 55 #error ACPI_MACHINE_WIDTH not defined 56 #endif 57 58 /*! [Begin] no source code translation */ 59 60 /* 61 * Data type ranges 62 * Note: These macros are designed to be compiler independent as well as 63 * working around problems that some 32-bit compilers have with 64-bit 64 * constants. 65 */ 66 #define ACPI_UINT8_MAX (UINT8) (~((UINT8) 0)) /* 0xFF */ 67 #define ACPI_UINT16_MAX (UINT16)(~((UINT16) 0)) /* 0xFFFF */ 68 #define ACPI_UINT32_MAX (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF */ 69 #define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */ 70 #define ACPI_ASCII_MAX 0x7F 71 72 /* 73 * Architecture-specific ACPICA Subsystem Data Types 74 * 75 * The goal of these types is to provide source code portability across 76 * 16-bit, 32-bit, and 64-bit targets. 77 * 78 * 1) The following types are of fixed size for all targets (16/32/64): 79 * 80 * BOOLEAN Logical boolean 81 * 82 * UINT8 8-bit (1 byte) unsigned value 83 * UINT16 16-bit (2 byte) unsigned value 84 * UINT32 32-bit (4 byte) unsigned value 85 * UINT64 64-bit (8 byte) unsigned value 86 * 87 * INT16 16-bit (2 byte) signed value 88 * INT32 32-bit (4 byte) signed value 89 * INT64 64-bit (8 byte) signed value 90 * 91 * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the 92 * compiler-dependent header(s) and were introduced because there is no common 93 * 64-bit integer type across the various compilation models, as shown in 94 * the table below. 95 * 96 * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit 97 * char 8 8 8 8 8 8 98 * short 16 16 16 16 16 16 99 * _int32 32 100 * int 32 64 32 32 16 16 101 * long 64 64 32 32 32 32 102 * long long 64 64 103 * pointer 64 64 64 32 32 32 104 * 105 * Note: ILP64 and LP32 are currently not supported. 106 * 107 * 108 * 2) These types represent the native word size of the target mode of the 109 * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are 110 * usually used for memory allocation, efficient loop counters, and array 111 * indexes. The types are similar to the size_t type in the C library and are 112 * required because there is no C type that consistently represents the native 113 * data width. ACPI_SIZE is needed because there is no guarantee that a 114 * kernel-level C library is present. 115 * 116 * ACPI_SIZE 16/32/64-bit unsigned value 117 * ACPI_NATIVE_INT 16/32/64-bit signed value 118 * 119 */ 120 121 /******************************************************************************* 122 * 123 * Common types for all compilers, all targets 124 * 125 ******************************************************************************/ 126 127 typedef unsigned char BOOLEAN; 128 typedef unsigned char UINT8; 129 typedef unsigned short UINT16; 130 typedef COMPILER_DEPENDENT_UINT64 UINT64; 131 typedef COMPILER_DEPENDENT_INT64 INT64; 132 133 /*! [End] no source code translation !*/ 134 135 /******************************************************************************* 136 * 137 * Types specific to 64-bit targets 138 * 139 ******************************************************************************/ 140 141 #if ACPI_MACHINE_WIDTH == 64 142 143 /*! [Begin] no source code translation (keep the typedefs as-is) */ 144 145 typedef unsigned int UINT32; 146 typedef int INT32; 147 148 /*! [End] no source code translation !*/ 149 150 typedef s64 acpi_native_int; 151 152 typedef u64 acpi_size; 153 typedef u64 acpi_io_address; 154 typedef u64 acpi_physical_address; 155 156 #define ACPI_MAX_PTR ACPI_UINT64_MAX 157 #define ACPI_SIZE_MAX ACPI_UINT64_MAX 158 159 #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ 160 161 /* 162 * In the case of the Itanium Processor Family (IPF), the hardware does not 163 * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag 164 * to indicate that special precautions must be taken to avoid alignment faults. 165 * (IA64 or ia64 is currently used by existing compilers to indicate IPF.) 166 * 167 * Note: Em64_t and other X86-64 processors support misaligned transfers, 168 * so there is no need to define this flag. 169 */ 170 #if defined (__IA64__) || defined (__ia64__) 171 #define ACPI_MISALIGNMENT_NOT_SUPPORTED 172 #endif 173 174 /******************************************************************************* 175 * 176 * Types specific to 32-bit targets 177 * 178 ******************************************************************************/ 179 180 #elif ACPI_MACHINE_WIDTH == 32 181 182 /*! [Begin] no source code translation (keep the typedefs as-is) */ 183 184 typedef unsigned int UINT32; 185 typedef int INT32; 186 187 /*! [End] no source code translation !*/ 188 189 typedef s32 acpi_native_int; 190 191 typedef u32 acpi_size; 192 typedef u32 acpi_io_address; 193 typedef u32 acpi_physical_address; 194 195 #define ACPI_MAX_PTR ACPI_UINT32_MAX 196 #define ACPI_SIZE_MAX ACPI_UINT32_MAX 197 198 #else 199 200 /* ACPI_MACHINE_WIDTH must be either 64 or 32 */ 201 202 #error unknown ACPI_MACHINE_WIDTH 203 #endif 204 205 /******************************************************************************* 206 * 207 * OS-dependent types 208 * 209 * If the defaults below are not appropriate for the host system, they can 210 * be defined in the OS-specific header, and this will take precedence. 211 * 212 ******************************************************************************/ 213 214 /* Value returned by acpi_os_get_thread_id */ 215 216 #ifndef acpi_thread_id 217 #define acpi_thread_id acpi_size 218 #endif 219 220 /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */ 221 222 #ifndef acpi_cpu_flags 223 #define acpi_cpu_flags acpi_size 224 #endif 225 226 /* Object returned from acpi_os_create_cache */ 227 228 #ifndef acpi_cache_t 229 #ifdef ACPI_USE_LOCAL_CACHE 230 #define acpi_cache_t struct acpi_memory_list 231 #else 232 #define acpi_cache_t void * 233 #endif 234 #endif 235 236 /* 237 * Synchronization objects - Mutexes, Semaphores, and spin_locks 238 */ 239 #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) 240 /* 241 * These macros are used if the host OS does not support a mutex object. 242 * Map the OSL Mutex interfaces to binary semaphores. 243 */ 244 #define acpi_mutex acpi_semaphore 245 #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle) 246 #define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle) 247 #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time) 248 #define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1) 249 #endif 250 251 /* Configurable types for synchronization objects */ 252 253 #ifndef acpi_spinlock 254 #define acpi_spinlock void * 255 #endif 256 257 #ifndef acpi_semaphore 258 #define acpi_semaphore void * 259 #endif 260 261 #ifndef acpi_mutex 262 #define acpi_mutex void * 263 #endif 264 265 /******************************************************************************* 266 * 267 * Compiler-dependent types 268 * 269 * If the defaults below are not appropriate for the host compiler, they can 270 * be defined in the compiler-specific header, and this will take precedence. 271 * 272 ******************************************************************************/ 273 274 /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ 275 276 #ifndef acpi_uintptr_t 277 #define acpi_uintptr_t void * 278 #endif 279 280 /* 281 * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because 282 * some compilers can catch printf format string problems 283 */ 284 #ifndef ACPI_PRINTF_LIKE 285 #define ACPI_PRINTF_LIKE(c) 286 #endif 287 288 /* 289 * Some compilers complain about unused variables. Sometimes we don't want to 290 * use all the variables (for example, _acpi_module_name). This allows us 291 * to to tell the compiler in a per-variable manner that a variable 292 * is unused 293 */ 294 #ifndef ACPI_UNUSED_VAR 295 #define ACPI_UNUSED_VAR 296 #endif 297 298 /* 299 * All ACPICA functions that are available to the rest of the kernel are 300 * tagged with this macro which can be defined as appropriate for the host. 301 */ 302 #ifndef ACPI_EXPORT_SYMBOL 303 #define ACPI_EXPORT_SYMBOL(symbol) 304 #endif 305 306 /****************************************************************************** 307 * 308 * ACPI Specification constants (Do not change unless the specification changes) 309 * 310 *****************************************************************************/ 311 312 /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ 313 314 #define ACPI_MAX_GPE_BLOCKS 2 315 316 /* Default ACPI register widths */ 317 318 #define ACPI_GPE_REGISTER_WIDTH 8 319 #define ACPI_PM1_REGISTER_WIDTH 16 320 #define ACPI_PM2_REGISTER_WIDTH 8 321 #define ACPI_PM_TIMER_WIDTH 32 322 323 /* Names within the namespace are 4 bytes long */ 324 325 #define ACPI_NAME_SIZE 4 326 #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ 327 #define ACPI_PATH_SEPARATOR '.' 328 329 /* Sizes for ACPI table headers */ 330 331 #define ACPI_OEM_ID_SIZE 6 332 #define ACPI_OEM_TABLE_ID_SIZE 8 333 334 /* ACPI/PNP hardware IDs */ 335 336 #define PCI_ROOT_HID_STRING "PNP0A03" 337 #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" 338 339 /* PM Timer ticks per second (HZ) */ 340 341 #define PM_TIMER_FREQUENCY 3579545 342 343 /******************************************************************************* 344 * 345 * Independent types 346 * 347 ******************************************************************************/ 348 349 /* Logical defines and NULL */ 350 351 #ifdef FALSE 352 #undef FALSE 353 #endif 354 #define FALSE (1 == 0) 355 356 #ifdef TRUE 357 #undef TRUE 358 #endif 359 #define TRUE (1 == 1) 360 361 #ifndef NULL 362 #define NULL (void *) 0 363 #endif 364 365 /* 366 * Miscellaneous types 367 */ 368 typedef u32 acpi_status; /* All ACPI Exceptions */ 369 typedef u32 acpi_name; /* 4-byte ACPI name */ 370 typedef char *acpi_string; /* Null terminated ASCII string */ 371 typedef void *acpi_handle; /* Actually a ptr to a NS Node */ 372 373 /* Owner IDs are used to track namespace nodes for selective deletion */ 374 375 typedef u8 acpi_owner_id; 376 #define ACPI_OWNER_ID_MAX 0xFF 377 378 struct uint64_struct { 379 u32 lo; 380 u32 hi; 381 }; 382 383 union uint64_overlay { 384 u64 full; 385 struct uint64_struct part; 386 }; 387 388 struct uint32_struct { 389 u32 lo; 390 u32 hi; 391 }; 392 393 /* 394 * Acpi integer width. In ACPI version 1, integers are 32 bits. In ACPI 395 * version 2, integers are 64 bits. Note that this pertains to the ACPI integer 396 * type only, not other integers used in the implementation of the ACPI CA 397 * subsystem. 398 */ 399 typedef unsigned long long acpi_integer; 400 #define ACPI_INTEGER_MAX ACPI_UINT64_MAX 401 #define ACPI_INTEGER_BIT_SIZE 64 402 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ 403 404 #if ACPI_MACHINE_WIDTH == 64 405 #define ACPI_USE_NATIVE_DIVIDE /* Use compiler native 64-bit divide */ 406 #endif 407 408 #define ACPI_MAX64_DECIMAL_DIGITS 20 409 #define ACPI_MAX32_DECIMAL_DIGITS 10 410 #define ACPI_MAX16_DECIMAL_DIGITS 5 411 #define ACPI_MAX8_DECIMAL_DIGITS 3 412 413 /* PM Timer ticks per second (HZ) */ 414 415 #define PM_TIMER_FREQUENCY 3579545 416 417 /* 418 * Constants with special meanings 419 */ 420 #define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR) 421 #define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */ 422 #define ACPI_DO_NOT_WAIT 0 423 424 /******************************************************************************* 425 * 426 * Commonly used macros 427 * 428 ******************************************************************************/ 429 430 /* Data manipulation */ 431 432 #define ACPI_LOWORD(l) ((u16)(u32)(l)) 433 #define ACPI_HIWORD(l) ((u16)((((u32)(l)) >> 16) & 0xFFFF)) 434 #define ACPI_LOBYTE(l) ((u8)(u16)(l)) 435 #define ACPI_HIBYTE(l) ((u8)((((u16)(l)) >> 8) & 0xFF)) 436 437 /* Full 64-bit integer must be available on both 32-bit and 64-bit platforms */ 438 439 struct acpi_integer_overlay { 440 u32 lo_dword; 441 u32 hi_dword; 442 }; 443 444 #define ACPI_LODWORD(integer) (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->lo_dword) 445 #define ACPI_HIDWORD(integer) (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->hi_dword) 446 447 #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) 448 #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) 449 #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) 450 #define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) 451 452 /* Size calculation */ 453 454 #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) 455 456 /* Pointer manipulation */ 457 458 #define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) 459 #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) 460 #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) 461 #define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))) 462 463 /* Pointer/Integer type conversions */ 464 465 #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i) 466 #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) 467 #define ACPI_OFFSET(d, f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL) 468 #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) 469 #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) 470 471 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED 472 #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) 473 #else 474 #define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) 475 #endif 476 477 /******************************************************************************* 478 * 479 * Miscellaneous constants 480 * 481 ******************************************************************************/ 482 483 /* 484 * Initialization sequence 485 */ 486 #define ACPI_FULL_INITIALIZATION 0x00 487 #define ACPI_NO_ADDRESS_SPACE_INIT 0x01 488 #define ACPI_NO_HARDWARE_INIT 0x02 489 #define ACPI_NO_EVENT_INIT 0x04 490 #define ACPI_NO_HANDLER_INIT 0x08 491 #define ACPI_NO_ACPI_ENABLE 0x10 492 #define ACPI_NO_DEVICE_INIT 0x20 493 #define ACPI_NO_OBJECT_INIT 0x40 494 495 /* 496 * Initialization state 497 */ 498 #define ACPI_SUBSYSTEM_INITIALIZE 0x01 499 #define ACPI_INITIALIZED_OK 0x02 500 501 /* 502 * Power state values 503 */ 504 #define ACPI_STATE_UNKNOWN (u8) 0xFF 505 506 #define ACPI_STATE_S0 (u8) 0 507 #define ACPI_STATE_S1 (u8) 1 508 #define ACPI_STATE_S2 (u8) 2 509 #define ACPI_STATE_S3 (u8) 3 510 #define ACPI_STATE_S4 (u8) 4 511 #define ACPI_STATE_S5 (u8) 5 512 #define ACPI_S_STATES_MAX ACPI_STATE_S5 513 #define ACPI_S_STATE_COUNT 6 514 515 #define ACPI_STATE_D0 (u8) 0 516 #define ACPI_STATE_D1 (u8) 1 517 #define ACPI_STATE_D2 (u8) 2 518 #define ACPI_STATE_D3 (u8) 3 519 #define ACPI_D_STATES_MAX ACPI_STATE_D3 520 #define ACPI_D_STATE_COUNT 4 521 522 #define ACPI_STATE_C0 (u8) 0 523 #define ACPI_STATE_C1 (u8) 1 524 #define ACPI_STATE_C2 (u8) 2 525 #define ACPI_STATE_C3 (u8) 3 526 #define ACPI_C_STATES_MAX ACPI_STATE_C3 527 #define ACPI_C_STATE_COUNT 4 528 529 /* 530 * Sleep type invalid value 531 */ 532 #define ACPI_SLEEP_TYPE_MAX 0x7 533 #define ACPI_SLEEP_TYPE_INVALID 0xFF 534 535 /* 536 * Standard notify values 537 */ 538 #define ACPI_NOTIFY_BUS_CHECK (u8) 0x00 539 #define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01 540 #define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02 541 #define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03 542 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04 543 #define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05 544 #define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06 545 #define ACPI_NOTIFY_POWER_FAULT (u8) 0x07 546 #define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08 547 #define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09 548 #define ACPI_NOTIFY_RESERVED (u8) 0x0A 549 #define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B 550 551 #define ACPI_NOTIFY_MAX 0x0B 552 553 /* 554 * Types associated with ACPI names and objects. The first group of 555 * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition 556 * of the ACPI object_type() operator (See the ACPI Spec). Therefore, 557 * only add to the first group if the spec changes. 558 * 559 * NOTE: Types must be kept in sync with the global acpi_ns_properties 560 * and acpi_ns_type_names arrays. 561 */ 562 typedef u32 acpi_object_type; 563 564 #define ACPI_TYPE_ANY 0x00 565 #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ 566 #define ACPI_TYPE_STRING 0x02 567 #define ACPI_TYPE_BUFFER 0x03 568 #define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */ 569 #define ACPI_TYPE_FIELD_UNIT 0x05 570 #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ 571 #define ACPI_TYPE_EVENT 0x07 572 #define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */ 573 #define ACPI_TYPE_MUTEX 0x09 574 #define ACPI_TYPE_REGION 0x0A 575 #define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */ 576 #define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */ 577 #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ 578 #define ACPI_TYPE_BUFFER_FIELD 0x0E 579 #define ACPI_TYPE_DDB_HANDLE 0x0F 580 #define ACPI_TYPE_DEBUG_OBJECT 0x10 581 582 #define ACPI_TYPE_EXTERNAL_MAX 0x10 583 584 /* 585 * These are object types that do not map directly to the ACPI 586 * object_type() operator. They are used for various internal purposes only. 587 * If new predefined ACPI_TYPEs are added (via the ACPI specification), these 588 * internal types must move upwards. (There is code that depends on these 589 * values being contiguous with the external types above.) 590 */ 591 #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 592 #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 593 #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 594 #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */ 595 #define ACPI_TYPE_LOCAL_ALIAS 0x15 596 #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 597 #define ACPI_TYPE_LOCAL_NOTIFY 0x17 598 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 599 #define ACPI_TYPE_LOCAL_RESOURCE 0x19 600 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A 601 #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */ 602 603 #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ 604 605 /* 606 * These are special object types that never appear in 607 * a Namespace node, only in a union acpi_operand_object 608 */ 609 #define ACPI_TYPE_LOCAL_EXTRA 0x1C 610 #define ACPI_TYPE_LOCAL_DATA 0x1D 611 612 #define ACPI_TYPE_LOCAL_MAX 0x1D 613 614 /* All types above here are invalid */ 615 616 #define ACPI_TYPE_INVALID 0x1E 617 #define ACPI_TYPE_NOT_FOUND 0xFF 618 619 #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) 620 621 /* 622 * All I/O 623 */ 624 #define ACPI_READ 0 625 #define ACPI_WRITE 1 626 #define ACPI_IO_MASK 1 627 628 /* 629 * Event Types: Fixed & General Purpose 630 */ 631 typedef u32 acpi_event_type; 632 633 /* 634 * Fixed events 635 */ 636 #define ACPI_EVENT_PMTIMER 0 637 #define ACPI_EVENT_GLOBAL 1 638 #define ACPI_EVENT_POWER_BUTTON 2 639 #define ACPI_EVENT_SLEEP_BUTTON 3 640 #define ACPI_EVENT_RTC 4 641 #define ACPI_EVENT_MAX 4 642 #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 643 644 /* 645 * Event Status - Per event 646 * ------------- 647 * The encoding of acpi_event_status is illustrated below. 648 * Note that a set bit (1) indicates the property is TRUE 649 * (e.g. if bit 0 is set then the event is enabled). 650 * +-------------+-+-+-+ 651 * | Bits 31:3 |2|1|0| 652 * +-------------+-+-+-+ 653 * | | | | 654 * | | | +- Enabled? 655 * | | +--- Enabled for wake? 656 * | +----- Set? 657 * +----------- <Reserved> 658 */ 659 typedef u32 acpi_event_status; 660 661 #define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00 662 #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01 663 #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02 664 #define ACPI_EVENT_FLAG_SET (acpi_event_status) 0x04 665 #define ACPI_EVENT_FLAG_HANDLE (acpi_event_status) 0x08 666 667 /* 668 * General Purpose Events (GPE) 669 */ 670 #define ACPI_GPE_INVALID 0xFF 671 #define ACPI_GPE_MAX 0xFF 672 #define ACPI_NUM_GPE 256 673 674 #define ACPI_GPE_ENABLE 0 675 #define ACPI_GPE_DISABLE 1 676 677 /* 678 * GPE info flags - Per GPE 679 * +-+-+-+---+---+-+ 680 * |7|6|5|4:3|2:1|0| 681 * +-+-+-+---+---+-+ 682 * | | | | | | 683 * | | | | | +--- Interrupt type: Edge or Level Triggered 684 * | | | | +--- Type: Wake-only, Runtime-only, or wake/runtime 685 * | | | +--- Type of dispatch -- to method, handler, or none 686 * | | +--- Enabled for runtime? 687 * | +--- Enabled for wake? 688 * +--- Unused 689 */ 690 #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01 691 #define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x01 692 #define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00 693 694 #define ACPI_GPE_TYPE_MASK (u8) 0x06 695 #define ACPI_GPE_TYPE_WAKE_RUN (u8) 0x06 696 #define ACPI_GPE_TYPE_WAKE (u8) 0x02 697 #define ACPI_GPE_TYPE_RUNTIME (u8) 0x04 /* Default */ 698 699 #define ACPI_GPE_DISPATCH_MASK (u8) 0x18 700 #define ACPI_GPE_DISPATCH_HANDLER (u8) 0x08 701 #define ACPI_GPE_DISPATCH_METHOD (u8) 0x10 702 #define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00 /* Default */ 703 704 #define ACPI_GPE_RUN_ENABLE_MASK (u8) 0x20 705 #define ACPI_GPE_RUN_ENABLED (u8) 0x20 706 #define ACPI_GPE_RUN_DISABLED (u8) 0x00 /* Default */ 707 708 #define ACPI_GPE_WAKE_ENABLE_MASK (u8) 0x40 709 #define ACPI_GPE_WAKE_ENABLED (u8) 0x40 710 #define ACPI_GPE_WAKE_DISABLED (u8) 0x00 /* Default */ 711 712 #define ACPI_GPE_ENABLE_MASK (u8) 0x60 /* Both run/wake */ 713 714 /* 715 * Flags for GPE and Lock interfaces 716 */ 717 #define ACPI_EVENT_WAKE_ENABLE 0x2 /* acpi_gpe_enable */ 718 #define ACPI_EVENT_WAKE_DISABLE 0x2 /* acpi_gpe_disable */ 719 720 #define ACPI_NOT_ISR 0x1 721 #define ACPI_ISR 0x0 722 723 /* Notify types */ 724 725 #define ACPI_SYSTEM_NOTIFY 0x1 726 #define ACPI_DEVICE_NOTIFY 0x2 727 #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) 728 #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 729 730 #define ACPI_MAX_SYS_NOTIFY 0x7f 731 732 /* Address Space (Operation Region) Types */ 733 734 typedef u8 acpi_adr_space_type; 735 736 #define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0 737 #define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1 738 #define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2 739 #define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3 740 #define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4 741 #define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5 742 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6 743 #define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 7 744 #define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 127 745 746 /* 747 * bit_register IDs 748 * 749 * These values are intended to be used by the hardware interfaces 750 * and are mapped to individual bitfields defined within the ACPI 751 * registers. See the acpi_gbl_bit_register_info global table in utglobal.c 752 * for this mapping. 753 */ 754 755 /* PM1 Status register */ 756 757 #define ACPI_BITREG_TIMER_STATUS 0x00 758 #define ACPI_BITREG_BUS_MASTER_STATUS 0x01 759 #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 760 #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 761 #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 762 #define ACPI_BITREG_RT_CLOCK_STATUS 0x05 763 #define ACPI_BITREG_WAKE_STATUS 0x06 764 #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 765 766 /* PM1 Enable register */ 767 768 #define ACPI_BITREG_TIMER_ENABLE 0x08 769 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 770 #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A 771 #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B 772 #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C 773 #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D 774 775 /* PM1 Control register */ 776 777 #define ACPI_BITREG_SCI_ENABLE 0x0E 778 #define ACPI_BITREG_BUS_MASTER_RLD 0x0F 779 #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 780 #define ACPI_BITREG_SLEEP_TYPE 0x11 781 #define ACPI_BITREG_SLEEP_ENABLE 0x12 782 783 /* PM2 Control register */ 784 785 #define ACPI_BITREG_ARB_DISABLE 0x13 786 787 #define ACPI_BITREG_MAX 0x13 788 #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 789 790 /* Status register values. A 1 clears a status bit. 0 = no effect */ 791 792 #define ACPI_CLEAR_STATUS 1 793 794 /* Enable and Control register values */ 795 796 #define ACPI_ENABLE_EVENT 1 797 #define ACPI_DISABLE_EVENT 0 798 799 /* 800 * External ACPI object definition 801 */ 802 803 /* 804 * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element 805 * or an unresolved named reference. 806 */ 807 union acpi_object { 808 acpi_object_type type; /* See definition of acpi_ns_type for values */ 809 struct { 810 acpi_object_type type; /* ACPI_TYPE_INTEGER */ 811 acpi_integer value; /* The actual number */ 812 } integer; 813 814 struct { 815 acpi_object_type type; /* ACPI_TYPE_STRING */ 816 u32 length; /* # of bytes in string, excluding trailing null */ 817 char *pointer; /* points to the string value */ 818 } string; 819 820 struct { 821 acpi_object_type type; /* ACPI_TYPE_BUFFER */ 822 u32 length; /* # of bytes in buffer */ 823 u8 *pointer; /* points to the buffer */ 824 } buffer; 825 826 struct { 827 acpi_object_type type; /* ACPI_TYPE_PACKAGE */ 828 u32 count; /* # of elements in package */ 829 union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */ 830 } package; 831 832 struct { 833 acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */ 834 acpi_object_type actual_type; /* Type associated with the Handle */ 835 acpi_handle handle; /* object reference */ 836 } reference; 837 838 struct { 839 acpi_object_type type; /* ACPI_TYPE_PROCESSOR */ 840 u32 proc_id; 841 acpi_io_address pblk_address; 842 u32 pblk_length; 843 } processor; 844 845 struct { 846 acpi_object_type type; /* ACPI_TYPE_POWER */ 847 u32 system_level; 848 u32 resource_order; 849 } power_resource; 850 }; 851 852 /* 853 * List of objects, used as a parameter list for control method evaluation 854 */ 855 struct acpi_object_list { 856 u32 count; 857 union acpi_object *pointer; 858 }; 859 860 /* 861 * Miscellaneous common Data Structures used by the interfaces 862 */ 863 #define ACPI_NO_BUFFER 0 864 #define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) 865 #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) 866 867 struct acpi_buffer { 868 acpi_size length; /* Length in bytes of the buffer */ 869 void *pointer; /* pointer to buffer */ 870 }; 871 872 /* 873 * name_type for acpi_get_name 874 */ 875 #define ACPI_FULL_PATHNAME 0 876 #define ACPI_SINGLE_NAME 1 877 #define ACPI_NAME_TYPE_MAX 1 878 879 /* 880 * Predefined Namespace items 881 */ 882 struct acpi_predefined_names { 883 char *name; 884 u8 type; 885 char *val; 886 }; 887 888 /* 889 * Structure and flags for acpi_get_system_info 890 */ 891 #define ACPI_SYS_MODE_UNKNOWN 0x0000 892 #define ACPI_SYS_MODE_ACPI 0x0001 893 #define ACPI_SYS_MODE_LEGACY 0x0002 894 #define ACPI_SYS_MODES_MASK 0x0003 895 896 /* 897 * System info returned by acpi_get_system_info() 898 */ 899 struct acpi_system_info { 900 u32 acpi_ca_version; 901 u32 flags; 902 u32 timer_resolution; 903 u32 reserved1; 904 u32 reserved2; 905 u32 debug_level; 906 u32 debug_layer; 907 }; 908 909 /* Table Event Types */ 910 911 #define ACPI_TABLE_EVENT_LOAD 0x0 912 #define ACPI_TABLE_EVENT_UNLOAD 0x1 913 #define ACPI_NUM_TABLE_EVENTS 2 914 915 /* 916 * Types specific to the OS service interfaces 917 */ 918 typedef u32(ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context); 919 920 typedef void 921 (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context); 922 923 /* 924 * Various handlers and callback procedures 925 */ 926 typedef u32(*acpi_event_handler) (void *context); 927 928 typedef 929 void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context); 930 931 typedef 932 void (*acpi_object_handler) (acpi_handle object, u32 function, void *data); 933 934 typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function); 935 936 #define ACPI_INIT_DEVICE_INI 1 937 938 typedef 939 acpi_status(*acpi_exception_handler) (acpi_status aml_status, 940 acpi_name name, 941 u16 opcode, 942 u32 aml_offset, void *context); 943 944 /* Table Event handler (Load, load_table, etc.) and types */ 945 946 typedef 947 acpi_status(*acpi_tbl_handler) (u32 event, void *table, void *context); 948 949 /* Address Spaces (For Operation Regions) */ 950 951 typedef 952 acpi_status(*acpi_adr_space_handler) (u32 function, 953 acpi_physical_address address, 954 u32 bit_width, 955 acpi_integer * value, 956 void *handler_context, 957 void *region_context); 958 959 #define ACPI_DEFAULT_HANDLER NULL 960 961 typedef 962 acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle, 963 u32 function, 964 void *handler_context, 965 void **region_context); 966 967 #define ACPI_REGION_ACTIVATE 0 968 #define ACPI_REGION_DEACTIVATE 1 969 970 typedef 971 acpi_status(*acpi_walk_callback) (acpi_handle obj_handle, 972 u32 nesting_level, 973 void *context, void **return_value); 974 975 /* Interrupt handler return values */ 976 977 #define ACPI_INTERRUPT_NOT_HANDLED 0x00 978 #define ACPI_INTERRUPT_HANDLED 0x01 979 980 /* Length of _HID, _UID, _CID, and UUID values */ 981 982 #define ACPI_DEVICE_ID_LENGTH 0x09 983 #define ACPI_MAX_CID_LENGTH 48 984 #define ACPI_UUID_LENGTH 16 985 986 /* Common string version of device HIDs and UIDs */ 987 988 struct acpica_device_id { 989 char value[ACPI_DEVICE_ID_LENGTH]; 990 }; 991 992 /* Common string version of device CIDs */ 993 994 struct acpi_compatible_id { 995 char value[ACPI_MAX_CID_LENGTH]; 996 }; 997 998 struct acpi_compatible_id_list { 999 u32 count; 1000 u32 size; 1001 struct acpi_compatible_id id[1]; 1002 }; 1003 1004 /* Structure and flags for acpi_get_object_info */ 1005 1006 #define ACPI_VALID_STA 0x0001 1007 #define ACPI_VALID_ADR 0x0002 1008 #define ACPI_VALID_HID 0x0004 1009 #define ACPI_VALID_UID 0x0008 1010 #define ACPI_VALID_CID 0x0010 1011 #define ACPI_VALID_SXDS 0x0020 1012 1013 /* Flags for _STA method */ 1014 1015 #define ACPI_STA_DEVICE_PRESENT 0x01 1016 #define ACPI_STA_DEVICE_ENABLED 0x02 1017 #define ACPI_STA_DEVICE_UI 0x04 1018 #define ACPI_STA_DEVICE_FUNCTIONING 0x08 1019 #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ 1020 #define ACPI_STA_BATTERY_PRESENT 0x10 1021 1022 #define ACPI_COMMON_OBJ_INFO \ 1023 acpi_object_type type; /* ACPI object type */ \ 1024 acpi_name name /* ACPI object Name */ 1025 1026 struct acpi_obj_info_header { 1027 ACPI_COMMON_OBJ_INFO; 1028 }; 1029 1030 /* Structure returned from Get Object Info */ 1031 1032 struct acpi_device_info { 1033 ACPI_COMMON_OBJ_INFO; 1034 1035 u32 param_count; /* If a method, required parameter count */ 1036 u32 valid; /* Indicates which fields below are valid */ 1037 u32 current_status; /* _STA value */ 1038 acpi_integer address; /* _ADR value if any */ 1039 struct acpica_device_id hardware_id; /* _HID value if any */ 1040 struct acpica_device_id unique_id; /* _UID value if any */ 1041 u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */ 1042 struct acpi_compatible_id_list compatibility_id; /* List of _CIDs if any */ 1043 }; 1044 1045 /* Context structs for address space handlers */ 1046 1047 struct acpi_pci_id { 1048 u16 segment; 1049 u16 bus; 1050 u16 device; 1051 u16 function; 1052 }; 1053 1054 struct acpi_mem_space_context { 1055 u32 length; 1056 acpi_physical_address address; 1057 acpi_physical_address mapped_physical_address; 1058 u8 *mapped_logical_address; 1059 acpi_size mapped_length; 1060 }; 1061 1062 /* 1063 * struct acpi_memory_list is used only if the ACPICA local cache is enabled 1064 */ 1065 struct acpi_memory_list { 1066 char *list_name; 1067 void *list_head; 1068 u16 object_size; 1069 u16 max_depth; 1070 u16 current_depth; 1071 u16 link_offset; 1072 1073 #ifdef ACPI_DBG_TRACK_ALLOCATIONS 1074 1075 /* Statistics for debug memory tracking only */ 1076 1077 u32 total_allocated; 1078 u32 total_freed; 1079 u32 max_occupied; 1080 u32 total_size; 1081 u32 current_total_size; 1082 u32 requests; 1083 u32 hits; 1084 #endif 1085 }; 1086 1087 #endif /* __ACTYPES_H__ */ 1088