xref: /openbmc/linux/include/acpi/actbl.h (revision 293d5b43)
1 /******************************************************************************
2  *
3  * Name: actbl.h - Basic ACPI Table Definitions
4  *
5  *****************************************************************************/
6 
7 /*
8  * Copyright (C) 2000 - 2016, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43 
44 #ifndef __ACTBL_H__
45 #define __ACTBL_H__
46 
47 /*******************************************************************************
48  *
49  * Fundamental ACPI tables
50  *
51  * This file contains definitions for the ACPI tables that are directly consumed
52  * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
53  * device drivers and other OS support code.
54  *
55  * The RSDP and FACS do not use the common ACPI table header. All other ACPI
56  * tables use the header.
57  *
58  ******************************************************************************/
59 
60 /*
61  * Values for description table header signatures for tables defined in this
62  * file. Useful because they make it more difficult to inadvertently type in
63  * the wrong signature.
64  */
65 #define ACPI_SIG_DSDT           "DSDT"	/* Differentiated System Description Table */
66 #define ACPI_SIG_FADT           "FACP"	/* Fixed ACPI Description Table */
67 #define ACPI_SIG_FACS           "FACS"	/* Firmware ACPI Control Structure */
68 #define ACPI_SIG_OSDT           "OSDT"	/* Override System Description Table */
69 #define ACPI_SIG_PSDT           "PSDT"	/* Persistent System Description Table */
70 #define ACPI_SIG_RSDP           "RSD PTR "	/* Root System Description Pointer */
71 #define ACPI_SIG_RSDT           "RSDT"	/* Root System Description Table */
72 #define ACPI_SIG_XSDT           "XSDT"	/* Extended  System Description Table */
73 #define ACPI_SIG_SSDT           "SSDT"	/* Secondary System Description Table */
74 #define ACPI_RSDP_NAME          "RSDP"	/* Short name for RSDP, not signature */
75 
76 /*
77  * All tables and structures must be byte-packed to match the ACPI
78  * specification, since the tables are provided by the system BIOS
79  */
80 #pragma pack(1)
81 
82 /*
83  * Note: C bitfields are not used for this reason:
84  *
85  * "Bitfields are great and easy to read, but unfortunately the C language
86  * does not specify the layout of bitfields in memory, which means they are
87  * essentially useless for dealing with packed data in on-disk formats or
88  * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
89  * this decision was a design error in C. Ritchie could have picked an order
90  * and stuck with it." Norman Ramsey.
91  * See http://stackoverflow.com/a/1053662/41661
92  */
93 
94 /*******************************************************************************
95  *
96  * Master ACPI Table Header. This common header is used by all ACPI tables
97  * except the RSDP and FACS.
98  *
99  ******************************************************************************/
100 
101 struct acpi_table_header {
102 	char signature[ACPI_NAME_SIZE];	/* ASCII table signature */
103 	u32 length;		/* Length of table in bytes, including this header */
104 	u8 revision;		/* ACPI Specification minor version number */
105 	u8 checksum;		/* To make sum of entire table == 0 */
106 	char oem_id[ACPI_OEM_ID_SIZE];	/* ASCII OEM identification */
107 	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE];	/* ASCII OEM table identification */
108 	u32 oem_revision;	/* OEM revision number */
109 	char asl_compiler_id[ACPI_NAME_SIZE];	/* ASCII ASL compiler vendor ID */
110 	u32 asl_compiler_revision;	/* ASL compiler version */
111 };
112 
113 /*******************************************************************************
114  *
115  * GAS - Generic Address Structure (ACPI 2.0+)
116  *
117  * Note: Since this structure is used in the ACPI tables, it is byte aligned.
118  * If misaligned access is not supported by the hardware, accesses to the
119  * 64-bit Address field must be performed with care.
120  *
121  ******************************************************************************/
122 
123 struct acpi_generic_address {
124 	u8 space_id;		/* Address space where struct or register exists */
125 	u8 bit_width;		/* Size in bits of given register */
126 	u8 bit_offset;		/* Bit offset within the register */
127 	u8 access_width;	/* Minimum Access size (ACPI 3.0) */
128 	u64 address;		/* 64-bit address of struct or register */
129 };
130 
131 /*******************************************************************************
132  *
133  * RSDP - Root System Description Pointer (Signature is "RSD PTR ")
134  *        Version 2
135  *
136  ******************************************************************************/
137 
138 struct acpi_table_rsdp {
139 	char signature[8];	/* ACPI signature, contains "RSD PTR " */
140 	u8 checksum;		/* ACPI 1.0 checksum */
141 	char oem_id[ACPI_OEM_ID_SIZE];	/* OEM identification */
142 	u8 revision;		/* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
143 	u32 rsdt_physical_address;	/* 32-bit physical address of the RSDT */
144 	u32 length;		/* Table length in bytes, including header (ACPI 2.0+) */
145 	u64 xsdt_physical_address;	/* 64-bit physical address of the XSDT (ACPI 2.0+) */
146 	u8 extended_checksum;	/* Checksum of entire table (ACPI 2.0+) */
147 	u8 reserved[3];		/* Reserved, must be zero */
148 };
149 
150 /* Standalone struct for the ACPI 1.0 RSDP */
151 
152 struct acpi_rsdp_common {
153 	char signature[8];
154 	u8 checksum;
155 	char oem_id[ACPI_OEM_ID_SIZE];
156 	u8 revision;
157 	u32 rsdt_physical_address;
158 };
159 
160 /* Standalone struct for the extended part of the RSDP (ACPI 2.0+) */
161 
162 struct acpi_rsdp_extension {
163 	u32 length;
164 	u64 xsdt_physical_address;
165 	u8 extended_checksum;
166 	u8 reserved[3];
167 };
168 
169 /*******************************************************************************
170  *
171  * RSDT/XSDT - Root System Description Tables
172  *             Version 1 (both)
173  *
174  ******************************************************************************/
175 
176 struct acpi_table_rsdt {
177 	struct acpi_table_header header;	/* Common ACPI table header */
178 	u32 table_offset_entry[1];	/* Array of pointers to ACPI tables */
179 };
180 
181 struct acpi_table_xsdt {
182 	struct acpi_table_header header;	/* Common ACPI table header */
183 	u64 table_offset_entry[1];	/* Array of pointers to ACPI tables */
184 };
185 
186 #define ACPI_RSDT_ENTRY_SIZE        (sizeof (u32))
187 #define ACPI_XSDT_ENTRY_SIZE        (sizeof (u64))
188 
189 /*******************************************************************************
190  *
191  * FACS - Firmware ACPI Control Structure (FACS)
192  *
193  ******************************************************************************/
194 
195 struct acpi_table_facs {
196 	char signature[4];	/* ASCII table signature */
197 	u32 length;		/* Length of structure, in bytes */
198 	u32 hardware_signature;	/* Hardware configuration signature */
199 	u32 firmware_waking_vector;	/* 32-bit physical address of the Firmware Waking Vector */
200 	u32 global_lock;	/* Global Lock for shared hardware resources */
201 	u32 flags;
202 	u64 xfirmware_waking_vector;	/* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
203 	u8 version;		/* Version of this table (ACPI 2.0+) */
204 	u8 reserved[3];		/* Reserved, must be zero */
205 	u32 ospm_flags;		/* Flags to be set by OSPM (ACPI 4.0) */
206 	u8 reserved1[24];	/* Reserved, must be zero */
207 };
208 
209 /* Masks for global_lock flag field above */
210 
211 #define ACPI_GLOCK_PENDING          (1)	/* 00: Pending global lock ownership */
212 #define ACPI_GLOCK_OWNED            (1<<1)	/* 01: Global lock is owned */
213 
214 /* Masks for Flags field above  */
215 
216 #define ACPI_FACS_S4_BIOS_PRESENT   (1)	/* 00: S4BIOS support is present */
217 #define ACPI_FACS_64BIT_WAKE        (1<<1)	/* 01: 64-bit wake vector supported (ACPI 4.0) */
218 
219 /* Masks for ospm_flags field above */
220 
221 #define ACPI_FACS_64BIT_ENVIRONMENT (1)	/* 00: 64-bit wake environment is required (ACPI 4.0) */
222 
223 /*******************************************************************************
224  *
225  * FADT - Fixed ACPI Description Table (Signature "FACP")
226  *        Version 6
227  *
228  ******************************************************************************/
229 
230 /* Fields common to all versions of the FADT */
231 
232 struct acpi_table_fadt {
233 	struct acpi_table_header header;	/* Common ACPI table header */
234 	u32 facs;		/* 32-bit physical address of FACS */
235 	u32 dsdt;		/* 32-bit physical address of DSDT */
236 	u8 model;		/* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
237 	u8 preferred_profile;	/* Conveys preferred power management profile to OSPM. */
238 	u16 sci_interrupt;	/* System vector of SCI interrupt */
239 	u32 smi_command;	/* 32-bit Port address of SMI command port */
240 	u8 acpi_enable;		/* Value to write to SMI_CMD to enable ACPI */
241 	u8 acpi_disable;	/* Value to write to SMI_CMD to disable ACPI */
242 	u8 s4_bios_request;	/* Value to write to SMI_CMD to enter S4BIOS state */
243 	u8 pstate_control;	/* Processor performance state control */
244 	u32 pm1a_event_block;	/* 32-bit port address of Power Mgt 1a Event Reg Blk */
245 	u32 pm1b_event_block;	/* 32-bit port address of Power Mgt 1b Event Reg Blk */
246 	u32 pm1a_control_block;	/* 32-bit port address of Power Mgt 1a Control Reg Blk */
247 	u32 pm1b_control_block;	/* 32-bit port address of Power Mgt 1b Control Reg Blk */
248 	u32 pm2_control_block;	/* 32-bit port address of Power Mgt 2 Control Reg Blk */
249 	u32 pm_timer_block;	/* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */
250 	u32 gpe0_block;		/* 32-bit port address of General Purpose Event 0 Reg Blk */
251 	u32 gpe1_block;		/* 32-bit port address of General Purpose Event 1 Reg Blk */
252 	u8 pm1_event_length;	/* Byte Length of ports at pm1x_event_block */
253 	u8 pm1_control_length;	/* Byte Length of ports at pm1x_control_block */
254 	u8 pm2_control_length;	/* Byte Length of ports at pm2_control_block */
255 	u8 pm_timer_length;	/* Byte Length of ports at pm_timer_block */
256 	u8 gpe0_block_length;	/* Byte Length of ports at gpe0_block */
257 	u8 gpe1_block_length;	/* Byte Length of ports at gpe1_block */
258 	u8 gpe1_base;		/* Offset in GPE number space where GPE1 events start */
259 	u8 cst_control;		/* Support for the _CST object and C-States change notification */
260 	u16 c2_latency;		/* Worst case HW latency to enter/exit C2 state */
261 	u16 c3_latency;		/* Worst case HW latency to enter/exit C3 state */
262 	u16 flush_size;		/* Processor memory cache line width, in bytes */
263 	u16 flush_stride;	/* Number of flush strides that need to be read */
264 	u8 duty_offset;		/* Processor duty cycle index in processor P_CNT reg */
265 	u8 duty_width;		/* Processor duty cycle value bit width in P_CNT register */
266 	u8 day_alarm;		/* Index to day-of-month alarm in RTC CMOS RAM */
267 	u8 month_alarm;		/* Index to month-of-year alarm in RTC CMOS RAM */
268 	u8 century;		/* Index to century in RTC CMOS RAM */
269 	u16 boot_flags;		/* IA-PC Boot Architecture Flags (see below for individual flags) */
270 	u8 reserved;		/* Reserved, must be zero */
271 	u32 flags;		/* Miscellaneous flag bits (see below for individual flags) */
272 	struct acpi_generic_address reset_register;	/* 64-bit address of the Reset register */
273 	u8 reset_value;		/* Value to write to the reset_register port to reset the system */
274 	u16 arm_boot_flags;	/* ARM-Specific Boot Flags (see below for individual flags) (ACPI 5.1) */
275 	u8 minor_revision;	/* FADT Minor Revision (ACPI 5.1) */
276 	u64 Xfacs;		/* 64-bit physical address of FACS */
277 	u64 Xdsdt;		/* 64-bit physical address of DSDT */
278 	struct acpi_generic_address xpm1a_event_block;	/* 64-bit Extended Power Mgt 1a Event Reg Blk address */
279 	struct acpi_generic_address xpm1b_event_block;	/* 64-bit Extended Power Mgt 1b Event Reg Blk address */
280 	struct acpi_generic_address xpm1a_control_block;	/* 64-bit Extended Power Mgt 1a Control Reg Blk address */
281 	struct acpi_generic_address xpm1b_control_block;	/* 64-bit Extended Power Mgt 1b Control Reg Blk address */
282 	struct acpi_generic_address xpm2_control_block;	/* 64-bit Extended Power Mgt 2 Control Reg Blk address */
283 	struct acpi_generic_address xpm_timer_block;	/* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
284 	struct acpi_generic_address xgpe0_block;	/* 64-bit Extended General Purpose Event 0 Reg Blk address */
285 	struct acpi_generic_address xgpe1_block;	/* 64-bit Extended General Purpose Event 1 Reg Blk address */
286 	struct acpi_generic_address sleep_control;	/* 64-bit Sleep Control register (ACPI 5.0) */
287 	struct acpi_generic_address sleep_status;	/* 64-bit Sleep Status register (ACPI 5.0) */
288 	u64 hypervisor_id;	/* Hypervisor Vendor ID (ACPI 6.0) */
289 };
290 
291 /* Masks for FADT IA-PC Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */
292 
293 #define ACPI_FADT_LEGACY_DEVICES    (1)  	/* 00: [V2] System has LPC or ISA bus devices */
294 #define ACPI_FADT_8042              (1<<1)	/* 01: [V3] System has an 8042 controller on port 60/64 */
295 #define ACPI_FADT_NO_VGA            (1<<2)	/* 02: [V4] It is not safe to probe for VGA hardware */
296 #define ACPI_FADT_NO_MSI            (1<<3)	/* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
297 #define ACPI_FADT_NO_ASPM           (1<<4)	/* 04: [V4] PCIe ASPM control must not be enabled */
298 #define ACPI_FADT_NO_CMOS_RTC       (1<<5)	/* 05: [V5] No CMOS real-time clock present */
299 
300 #define FADT2_REVISION_ID               3
301 
302 /* Masks for FADT ARM Boot Architecture Flags (arm_boot_flags) ACPI 5.1 */
303 
304 #define ACPI_FADT_PSCI_COMPLIANT    (1)	/* 00: [V5+] PSCI 0.2+ is implemented */
305 #define ACPI_FADT_PSCI_USE_HVC      (1<<1)	/* 01: [V5+] HVC must be used instead of SMC as the PSCI conduit */
306 
307 /* Masks for FADT flags */
308 
309 #define ACPI_FADT_WBINVD            (1)	/* 00: [V1] The WBINVD instruction works properly */
310 #define ACPI_FADT_WBINVD_FLUSH      (1<<1)	/* 01: [V1] WBINVD flushes but does not invalidate caches */
311 #define ACPI_FADT_C1_SUPPORTED      (1<<2)	/* 02: [V1] All processors support C1 state */
312 #define ACPI_FADT_C2_MP_SUPPORTED   (1<<3)	/* 03: [V1] C2 state works on MP system */
313 #define ACPI_FADT_POWER_BUTTON      (1<<4)	/* 04: [V1] Power button is handled as a control method device */
314 #define ACPI_FADT_SLEEP_BUTTON      (1<<5)	/* 05: [V1] Sleep button is handled as a control method device */
315 #define ACPI_FADT_FIXED_RTC         (1<<6)	/* 06: [V1] RTC wakeup status is not in fixed register space */
316 #define ACPI_FADT_S4_RTC_WAKE       (1<<7)	/* 07: [V1] RTC alarm can wake system from S4 */
317 #define ACPI_FADT_32BIT_TIMER       (1<<8)	/* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
318 #define ACPI_FADT_DOCKING_SUPPORTED (1<<9)	/* 09: [V1] Docking supported */
319 #define ACPI_FADT_RESET_REGISTER    (1<<10)	/* 10: [V2] System reset via the FADT RESET_REG supported */
320 #define ACPI_FADT_SEALED_CASE       (1<<11)	/* 11: [V3] No internal expansion capabilities and case is sealed */
321 #define ACPI_FADT_HEADLESS          (1<<12)	/* 12: [V3] No local video capabilities or local input devices */
322 #define ACPI_FADT_SLEEP_TYPE        (1<<13)	/* 13: [V3] Must execute native instruction after writing  SLP_TYPx register */
323 #define ACPI_FADT_PCI_EXPRESS_WAKE  (1<<14)	/* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
324 #define ACPI_FADT_PLATFORM_CLOCK    (1<<15)	/* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
325 #define ACPI_FADT_S4_RTC_VALID      (1<<16)	/* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
326 #define ACPI_FADT_REMOTE_POWER_ON   (1<<17)	/* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
327 #define ACPI_FADT_APIC_CLUSTER      (1<<18)	/* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
328 #define ACPI_FADT_APIC_PHYSICAL     (1<<19)	/* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */
329 #define ACPI_FADT_HW_REDUCED        (1<<20)	/* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */
330 #define ACPI_FADT_LOW_POWER_S0      (1<<21)	/* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */
331 
332 /* Values for preferred_profile (Preferred Power Management Profiles) */
333 
334 enum acpi_preferred_pm_profiles {
335 	PM_UNSPECIFIED = 0,
336 	PM_DESKTOP = 1,
337 	PM_MOBILE = 2,
338 	PM_WORKSTATION = 3,
339 	PM_ENTERPRISE_SERVER = 4,
340 	PM_SOHO_SERVER = 5,
341 	PM_APPLIANCE_PC = 6,
342 	PM_PERFORMANCE_SERVER = 7,
343 	PM_TABLET = 8
344 };
345 
346 /* Values for sleep_status and sleep_control registers (V5+ FADT) */
347 
348 #define ACPI_X_WAKE_STATUS          0x80
349 #define ACPI_X_SLEEP_TYPE_MASK      0x1C
350 #define ACPI_X_SLEEP_TYPE_POSITION  0x02
351 #define ACPI_X_SLEEP_ENABLE         0x20
352 
353 /* Reset to default packing */
354 
355 #pragma pack()
356 
357 /*
358  * Internal table-related structures
359  */
360 union acpi_name_union {
361 	u32 integer;
362 	char ascii[4];
363 };
364 
365 /* Internal ACPI Table Descriptor. One per ACPI table. */
366 
367 struct acpi_table_desc {
368 	acpi_physical_address address;
369 	struct acpi_table_header *pointer;
370 	u32 length;		/* Length fixed at 32 bits (fixed in table header) */
371 	union acpi_name_union signature;
372 	acpi_owner_id owner_id;
373 	u8 flags;
374 };
375 
376 /* Masks for Flags field above */
377 
378 #define ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL  (0)	/* Virtual address, external maintained */
379 #define ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL (1)	/* Physical address, internally mapped */
380 #define ACPI_TABLE_ORIGIN_INTERNAL_VIRTUAL  (2)	/* Virtual address, internallly allocated */
381 #define ACPI_TABLE_ORIGIN_MASK              (3)
382 #define ACPI_TABLE_IS_LOADED                (8)
383 
384 /*
385  * Get the remaining ACPI tables
386  */
387 #include <acpi/actbl1.h>
388 #include <acpi/actbl2.h>
389 #include <acpi/actbl3.h>
390 
391 /* Macros used to generate offsets to specific table fields */
392 
393 #define ACPI_FADT_OFFSET(f)             (u16) ACPI_OFFSET (struct acpi_table_fadt, f)
394 
395 /*
396  * Sizes of the various flavors of FADT. We need to look closely
397  * at the FADT length because the version number essentially tells
398  * us nothing because of many BIOS bugs where the version does not
399  * match the expected length. In other words, the length of the
400  * FADT is the bottom line as to what the version really is.
401  *
402  * For reference, the values below are as follows:
403  *     FADT V1 size: 0x074
404  *     FADT V2 size: 0x084
405  *     FADT V3 size: 0x0F4
406  *     FADT V4 size: 0x0F4
407  *     FADT V5 size: 0x10C
408  *     FADT V6 size: 0x114
409  */
410 #define ACPI_FADT_V1_SIZE       (u32) (ACPI_FADT_OFFSET (flags) + 4)
411 #define ACPI_FADT_V2_SIZE       (u32) (ACPI_FADT_OFFSET (minor_revision) + 1)
412 #define ACPI_FADT_V3_SIZE       (u32) (ACPI_FADT_OFFSET (sleep_control))
413 #define ACPI_FADT_V5_SIZE       (u32) (ACPI_FADT_OFFSET (hypervisor_id))
414 #define ACPI_FADT_V6_SIZE       (u32) (sizeof (struct acpi_table_fadt))
415 
416 #define ACPI_FADT_CONFORMANCE   "ACPI 6.1 (FADT version 6)"
417 
418 #endif				/* __ACTBL_H__ */
419