xref: /openbmc/linux/fs/xfs/libxfs/xfs_log_rlimit.c (revision e3d786a3)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (c) 2013 Jie Liu.
4  * All Rights Reserved.
5  */
6 #include "xfs.h"
7 #include "xfs_fs.h"
8 #include "xfs_shared.h"
9 #include "xfs_format.h"
10 #include "xfs_log_format.h"
11 #include "xfs_trans_resv.h"
12 #include "xfs_mount.h"
13 #include "xfs_da_format.h"
14 #include "xfs_trans_space.h"
15 #include "xfs_inode.h"
16 #include "xfs_da_btree.h"
17 #include "xfs_attr_leaf.h"
18 #include "xfs_bmap_btree.h"
19 
20 /*
21  * Calculate the maximum length in bytes that would be required for a local
22  * attribute value as large attributes out of line are not logged.
23  */
24 STATIC int
25 xfs_log_calc_max_attrsetm_res(
26 	struct xfs_mount	*mp)
27 {
28 	int			size;
29 	int			nblks;
30 
31 	size = xfs_attr_leaf_entsize_local_max(mp->m_attr_geo->blksize) -
32 	       MAXNAMELEN - 1;
33 	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
34 	nblks += XFS_B_TO_FSB(mp, size);
35 	nblks += XFS_NEXTENTADD_SPACE_RES(mp, size, XFS_ATTR_FORK);
36 
37 	return  M_RES(mp)->tr_attrsetm.tr_logres +
38 		M_RES(mp)->tr_attrsetrt.tr_logres * nblks;
39 }
40 
41 /*
42  * Iterate over the log space reservation table to figure out and return
43  * the maximum one in terms of the pre-calculated values which were done
44  * at mount time.
45  */
46 void
47 xfs_log_get_max_trans_res(
48 	struct xfs_mount	*mp,
49 	struct xfs_trans_res	*max_resp)
50 {
51 	struct xfs_trans_res	*resp;
52 	struct xfs_trans_res	*end_resp;
53 	int			log_space = 0;
54 	int			attr_space;
55 
56 	attr_space = xfs_log_calc_max_attrsetm_res(mp);
57 
58 	resp = (struct xfs_trans_res *)M_RES(mp);
59 	end_resp = (struct xfs_trans_res *)(M_RES(mp) + 1);
60 	for (; resp < end_resp; resp++) {
61 		int		tmp = resp->tr_logcount > 1 ?
62 				      resp->tr_logres * resp->tr_logcount :
63 				      resp->tr_logres;
64 		if (log_space < tmp) {
65 			log_space = tmp;
66 			*max_resp = *resp;		/* struct copy */
67 		}
68 	}
69 
70 	if (attr_space > log_space) {
71 		*max_resp = M_RES(mp)->tr_attrsetm;	/* struct copy */
72 		max_resp->tr_logres = attr_space;
73 	}
74 }
75 
76 /*
77  * Calculate the minimum valid log size for the given superblock configuration.
78  * Used to calculate the minimum log size at mkfs time, and to determine if
79  * the log is large enough or not at mount time. Returns the minimum size in
80  * filesystem block size units.
81  */
82 int
83 xfs_log_calc_minimum_size(
84 	struct xfs_mount	*mp)
85 {
86 	struct xfs_trans_res	tres = {0};
87 	int			max_logres;
88 	int			min_logblks = 0;
89 	int			lsunit = 0;
90 
91 	xfs_log_get_max_trans_res(mp, &tres);
92 
93 	max_logres = xfs_log_calc_unit_res(mp, tres.tr_logres);
94 	if (tres.tr_logcount > 1)
95 		max_logres *= tres.tr_logcount;
96 
97 	if (xfs_sb_version_haslogv2(&mp->m_sb) && mp->m_sb.sb_logsunit > 1)
98 		lsunit = BTOBB(mp->m_sb.sb_logsunit);
99 
100 	/*
101 	 * Two factors should be taken into account for calculating the minimum
102 	 * log space.
103 	 * 1) The fundamental limitation is that no single transaction can be
104 	 *    larger than half size of the log.
105 	 *
106 	 *    From mkfs.xfs, this is considered by the XFS_MIN_LOG_FACTOR
107 	 *    define, which is set to 3. That means we can definitely fit
108 	 *    maximally sized 2 transactions in the log. We'll use this same
109 	 *    value here.
110 	 *
111 	 * 2) If the lsunit option is specified, a transaction requires 2 LSU
112 	 *    for the reservation because there are two log writes that can
113 	 *    require padding - the transaction data and the commit record which
114 	 *    are written separately and both can require padding to the LSU.
115 	 *    Consider that we can have an active CIL reservation holding 2*LSU,
116 	 *    but the CIL is not over a push threshold, in this case, if we
117 	 *    don't have enough log space for at one new transaction, which
118 	 *    includes another 2*LSU in the reservation, we will run into dead
119 	 *    loop situation in log space grant procedure. i.e.
120 	 *    xlog_grant_head_wait().
121 	 *
122 	 *    Hence the log size needs to be able to contain two maximally sized
123 	 *    and padded transactions, which is (2 * (2 * LSU + maxlres)).
124 	 *
125 	 * Also, the log size should be a multiple of the log stripe unit, round
126 	 * it up to lsunit boundary if lsunit is specified.
127 	 */
128 	if (lsunit) {
129 		min_logblks = roundup_64(BTOBB(max_logres), lsunit) +
130 			      2 * lsunit;
131 	} else
132 		min_logblks = BTOBB(max_logres) + 2 * BBSIZE;
133 	min_logblks *= XFS_MIN_LOG_FACTOR;
134 
135 	return XFS_BB_TO_FSB(mp, min_logblks);
136 }
137