xref: /openbmc/linux/fs/sync.c (revision f6723b56)
1 /*
2  * High-level sync()-related operations
3  */
4 
5 #include <linux/kernel.h>
6 #include <linux/file.h>
7 #include <linux/fs.h>
8 #include <linux/slab.h>
9 #include <linux/export.h>
10 #include <linux/namei.h>
11 #include <linux/sched.h>
12 #include <linux/writeback.h>
13 #include <linux/syscalls.h>
14 #include <linux/linkage.h>
15 #include <linux/pagemap.h>
16 #include <linux/quotaops.h>
17 #include <linux/backing-dev.h>
18 #include "internal.h"
19 
20 #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
21 			SYNC_FILE_RANGE_WAIT_AFTER)
22 
23 /*
24  * Do the filesystem syncing work. For simple filesystems
25  * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
26  * submit IO for these buffers via __sync_blockdev(). This also speeds up the
27  * wait == 1 case since in that case write_inode() functions do
28  * sync_dirty_buffer() and thus effectively write one block at a time.
29  */
30 static int __sync_filesystem(struct super_block *sb, int wait,
31 			     unsigned long start)
32 {
33 	if (wait)
34 		sync_inodes_sb(sb, start);
35 	else
36 		writeback_inodes_sb(sb, WB_REASON_SYNC);
37 
38 	if (sb->s_op->sync_fs)
39 		sb->s_op->sync_fs(sb, wait);
40 	return __sync_blockdev(sb->s_bdev, wait);
41 }
42 
43 /*
44  * Write out and wait upon all dirty data associated with this
45  * superblock.  Filesystem data as well as the underlying block
46  * device.  Takes the superblock lock.
47  */
48 int sync_filesystem(struct super_block *sb)
49 {
50 	int ret;
51 	unsigned long start = jiffies;
52 
53 	/*
54 	 * We need to be protected against the filesystem going from
55 	 * r/o to r/w or vice versa.
56 	 */
57 	WARN_ON(!rwsem_is_locked(&sb->s_umount));
58 
59 	/*
60 	 * No point in syncing out anything if the filesystem is read-only.
61 	 */
62 	if (sb->s_flags & MS_RDONLY)
63 		return 0;
64 
65 	ret = __sync_filesystem(sb, 0, start);
66 	if (ret < 0)
67 		return ret;
68 	return __sync_filesystem(sb, 1, start);
69 }
70 EXPORT_SYMBOL_GPL(sync_filesystem);
71 
72 static void sync_inodes_one_sb(struct super_block *sb, void *arg)
73 {
74 	if (!(sb->s_flags & MS_RDONLY))
75 		sync_inodes_sb(sb, *((unsigned long *)arg));
76 }
77 
78 static void sync_fs_one_sb(struct super_block *sb, void *arg)
79 {
80 	if (!(sb->s_flags & MS_RDONLY) && sb->s_op->sync_fs)
81 		sb->s_op->sync_fs(sb, *(int *)arg);
82 }
83 
84 static void fdatawrite_one_bdev(struct block_device *bdev, void *arg)
85 {
86 	filemap_fdatawrite(bdev->bd_inode->i_mapping);
87 }
88 
89 static void fdatawait_one_bdev(struct block_device *bdev, void *arg)
90 {
91 	filemap_fdatawait(bdev->bd_inode->i_mapping);
92 }
93 
94 /*
95  * Sync everything. We start by waking flusher threads so that most of
96  * writeback runs on all devices in parallel. Then we sync all inodes reliably
97  * which effectively also waits for all flusher threads to finish doing
98  * writeback. At this point all data is on disk so metadata should be stable
99  * and we tell filesystems to sync their metadata via ->sync_fs() calls.
100  * Finally, we writeout all block devices because some filesystems (e.g. ext2)
101  * just write metadata (such as inodes or bitmaps) to block device page cache
102  * and do not sync it on their own in ->sync_fs().
103  */
104 SYSCALL_DEFINE0(sync)
105 {
106 	int nowait = 0, wait = 1;
107 	unsigned long start = jiffies;
108 
109 	wakeup_flusher_threads(0, WB_REASON_SYNC);
110 	iterate_supers(sync_inodes_one_sb, &start);
111 	iterate_supers(sync_fs_one_sb, &nowait);
112 	iterate_supers(sync_fs_one_sb, &wait);
113 	iterate_bdevs(fdatawrite_one_bdev, NULL);
114 	iterate_bdevs(fdatawait_one_bdev, NULL);
115 	if (unlikely(laptop_mode))
116 		laptop_sync_completion();
117 	return 0;
118 }
119 
120 static void do_sync_work(struct work_struct *work)
121 {
122 	int nowait = 0;
123 
124 	/*
125 	 * Sync twice to reduce the possibility we skipped some inodes / pages
126 	 * because they were temporarily locked
127 	 */
128 	iterate_supers(sync_inodes_one_sb, &nowait);
129 	iterate_supers(sync_fs_one_sb, &nowait);
130 	iterate_bdevs(fdatawrite_one_bdev, NULL);
131 	iterate_supers(sync_inodes_one_sb, &nowait);
132 	iterate_supers(sync_fs_one_sb, &nowait);
133 	iterate_bdevs(fdatawrite_one_bdev, NULL);
134 	printk("Emergency Sync complete\n");
135 	kfree(work);
136 }
137 
138 void emergency_sync(void)
139 {
140 	struct work_struct *work;
141 
142 	work = kmalloc(sizeof(*work), GFP_ATOMIC);
143 	if (work) {
144 		INIT_WORK(work, do_sync_work);
145 		schedule_work(work);
146 	}
147 }
148 
149 /*
150  * sync a single super
151  */
152 SYSCALL_DEFINE1(syncfs, int, fd)
153 {
154 	struct fd f = fdget(fd);
155 	struct super_block *sb;
156 	int ret;
157 
158 	if (!f.file)
159 		return -EBADF;
160 	sb = f.file->f_dentry->d_sb;
161 
162 	down_read(&sb->s_umount);
163 	ret = sync_filesystem(sb);
164 	up_read(&sb->s_umount);
165 
166 	fdput(f);
167 	return ret;
168 }
169 
170 /**
171  * vfs_fsync_range - helper to sync a range of data & metadata to disk
172  * @file:		file to sync
173  * @start:		offset in bytes of the beginning of data range to sync
174  * @end:		offset in bytes of the end of data range (inclusive)
175  * @datasync:		perform only datasync
176  *
177  * Write back data in range @start..@end and metadata for @file to disk.  If
178  * @datasync is set only metadata needed to access modified file data is
179  * written.
180  */
181 int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
182 {
183 	if (!file->f_op->fsync)
184 		return -EINVAL;
185 	return file->f_op->fsync(file, start, end, datasync);
186 }
187 EXPORT_SYMBOL(vfs_fsync_range);
188 
189 /**
190  * vfs_fsync - perform a fsync or fdatasync on a file
191  * @file:		file to sync
192  * @datasync:		only perform a fdatasync operation
193  *
194  * Write back data and metadata for @file to disk.  If @datasync is
195  * set only metadata needed to access modified file data is written.
196  */
197 int vfs_fsync(struct file *file, int datasync)
198 {
199 	return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
200 }
201 EXPORT_SYMBOL(vfs_fsync);
202 
203 static int do_fsync(unsigned int fd, int datasync)
204 {
205 	struct fd f = fdget(fd);
206 	int ret = -EBADF;
207 
208 	if (f.file) {
209 		ret = vfs_fsync(f.file, datasync);
210 		fdput(f);
211 	}
212 	return ret;
213 }
214 
215 SYSCALL_DEFINE1(fsync, unsigned int, fd)
216 {
217 	return do_fsync(fd, 0);
218 }
219 
220 SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
221 {
222 	return do_fsync(fd, 1);
223 }
224 
225 /*
226  * sys_sync_file_range() permits finely controlled syncing over a segment of
227  * a file in the range offset .. (offset+nbytes-1) inclusive.  If nbytes is
228  * zero then sys_sync_file_range() will operate from offset out to EOF.
229  *
230  * The flag bits are:
231  *
232  * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
233  * before performing the write.
234  *
235  * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
236  * range which are not presently under writeback. Note that this may block for
237  * significant periods due to exhaustion of disk request structures.
238  *
239  * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
240  * after performing the write.
241  *
242  * Useful combinations of the flag bits are:
243  *
244  * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
245  * in the range which were dirty on entry to sys_sync_file_range() are placed
246  * under writeout.  This is a start-write-for-data-integrity operation.
247  *
248  * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
249  * are not presently under writeout.  This is an asynchronous flush-to-disk
250  * operation.  Not suitable for data integrity operations.
251  *
252  * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
253  * completion of writeout of all pages in the range.  This will be used after an
254  * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
255  * for that operation to complete and to return the result.
256  *
257  * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
258  * a traditional sync() operation.  This is a write-for-data-integrity operation
259  * which will ensure that all pages in the range which were dirty on entry to
260  * sys_sync_file_range() are committed to disk.
261  *
262  *
263  * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
264  * I/O errors or ENOSPC conditions and will return those to the caller, after
265  * clearing the EIO and ENOSPC flags in the address_space.
266  *
267  * It should be noted that none of these operations write out the file's
268  * metadata.  So unless the application is strictly performing overwrites of
269  * already-instantiated disk blocks, there are no guarantees here that the data
270  * will be available after a crash.
271  */
272 SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes,
273 				unsigned int, flags)
274 {
275 	int ret;
276 	struct fd f;
277 	struct address_space *mapping;
278 	loff_t endbyte;			/* inclusive */
279 	umode_t i_mode;
280 
281 	ret = -EINVAL;
282 	if (flags & ~VALID_FLAGS)
283 		goto out;
284 
285 	endbyte = offset + nbytes;
286 
287 	if ((s64)offset < 0)
288 		goto out;
289 	if ((s64)endbyte < 0)
290 		goto out;
291 	if (endbyte < offset)
292 		goto out;
293 
294 	if (sizeof(pgoff_t) == 4) {
295 		if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
296 			/*
297 			 * The range starts outside a 32 bit machine's
298 			 * pagecache addressing capabilities.  Let it "succeed"
299 			 */
300 			ret = 0;
301 			goto out;
302 		}
303 		if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
304 			/*
305 			 * Out to EOF
306 			 */
307 			nbytes = 0;
308 		}
309 	}
310 
311 	if (nbytes == 0)
312 		endbyte = LLONG_MAX;
313 	else
314 		endbyte--;		/* inclusive */
315 
316 	ret = -EBADF;
317 	f = fdget(fd);
318 	if (!f.file)
319 		goto out;
320 
321 	i_mode = file_inode(f.file)->i_mode;
322 	ret = -ESPIPE;
323 	if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
324 			!S_ISLNK(i_mode))
325 		goto out_put;
326 
327 	mapping = f.file->f_mapping;
328 	if (!mapping) {
329 		ret = -EINVAL;
330 		goto out_put;
331 	}
332 
333 	ret = 0;
334 	if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
335 		ret = filemap_fdatawait_range(mapping, offset, endbyte);
336 		if (ret < 0)
337 			goto out_put;
338 	}
339 
340 	if (flags & SYNC_FILE_RANGE_WRITE) {
341 		ret = filemap_fdatawrite_range(mapping, offset, endbyte);
342 		if (ret < 0)
343 			goto out_put;
344 	}
345 
346 	if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
347 		ret = filemap_fdatawait_range(mapping, offset, endbyte);
348 
349 out_put:
350 	fdput(f);
351 out:
352 	return ret;
353 }
354 
355 /* It would be nice if people remember that not all the world's an i386
356    when they introduce new system calls */
357 SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags,
358 				 loff_t, offset, loff_t, nbytes)
359 {
360 	return sys_sync_file_range(fd, offset, nbytes, flags);
361 }
362