xref: /openbmc/linux/fs/nilfs2/sufile.c (revision 9dbbc3b9)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * sufile.c - NILFS segment usage file.
4  *
5  * Copyright (C) 2006-2008 Nippon Telegraph and Telephone Corporation.
6  *
7  * Written by Koji Sato.
8  * Revised by Ryusuke Konishi.
9  */
10 
11 #include <linux/kernel.h>
12 #include <linux/fs.h>
13 #include <linux/string.h>
14 #include <linux/buffer_head.h>
15 #include <linux/errno.h>
16 #include "mdt.h"
17 #include "sufile.h"
18 
19 #include <trace/events/nilfs2.h>
20 
21 /**
22  * struct nilfs_sufile_info - on-memory private data of sufile
23  * @mi: on-memory private data of metadata file
24  * @ncleansegs: number of clean segments
25  * @allocmin: lower limit of allocatable segment range
26  * @allocmax: upper limit of allocatable segment range
27  */
28 struct nilfs_sufile_info {
29 	struct nilfs_mdt_info mi;
30 	unsigned long ncleansegs;/* number of clean segments */
31 	__u64 allocmin;		/* lower limit of allocatable segment range */
32 	__u64 allocmax;		/* upper limit of allocatable segment range */
33 };
34 
35 static inline struct nilfs_sufile_info *NILFS_SUI(struct inode *sufile)
36 {
37 	return (struct nilfs_sufile_info *)NILFS_MDT(sufile);
38 }
39 
40 static inline unsigned long
41 nilfs_sufile_segment_usages_per_block(const struct inode *sufile)
42 {
43 	return NILFS_MDT(sufile)->mi_entries_per_block;
44 }
45 
46 static unsigned long
47 nilfs_sufile_get_blkoff(const struct inode *sufile, __u64 segnum)
48 {
49 	__u64 t = segnum + NILFS_MDT(sufile)->mi_first_entry_offset;
50 
51 	do_div(t, nilfs_sufile_segment_usages_per_block(sufile));
52 	return (unsigned long)t;
53 }
54 
55 static unsigned long
56 nilfs_sufile_get_offset(const struct inode *sufile, __u64 segnum)
57 {
58 	__u64 t = segnum + NILFS_MDT(sufile)->mi_first_entry_offset;
59 
60 	return do_div(t, nilfs_sufile_segment_usages_per_block(sufile));
61 }
62 
63 static unsigned long
64 nilfs_sufile_segment_usages_in_block(const struct inode *sufile, __u64 curr,
65 				     __u64 max)
66 {
67 	return min_t(unsigned long,
68 		     nilfs_sufile_segment_usages_per_block(sufile) -
69 		     nilfs_sufile_get_offset(sufile, curr),
70 		     max - curr + 1);
71 }
72 
73 static struct nilfs_segment_usage *
74 nilfs_sufile_block_get_segment_usage(const struct inode *sufile, __u64 segnum,
75 				     struct buffer_head *bh, void *kaddr)
76 {
77 	return kaddr + bh_offset(bh) +
78 		nilfs_sufile_get_offset(sufile, segnum) *
79 		NILFS_MDT(sufile)->mi_entry_size;
80 }
81 
82 static inline int nilfs_sufile_get_header_block(struct inode *sufile,
83 						struct buffer_head **bhp)
84 {
85 	return nilfs_mdt_get_block(sufile, 0, 0, NULL, bhp);
86 }
87 
88 static inline int
89 nilfs_sufile_get_segment_usage_block(struct inode *sufile, __u64 segnum,
90 				     int create, struct buffer_head **bhp)
91 {
92 	return nilfs_mdt_get_block(sufile,
93 				   nilfs_sufile_get_blkoff(sufile, segnum),
94 				   create, NULL, bhp);
95 }
96 
97 static int nilfs_sufile_delete_segment_usage_block(struct inode *sufile,
98 						   __u64 segnum)
99 {
100 	return nilfs_mdt_delete_block(sufile,
101 				      nilfs_sufile_get_blkoff(sufile, segnum));
102 }
103 
104 static void nilfs_sufile_mod_counter(struct buffer_head *header_bh,
105 				     u64 ncleanadd, u64 ndirtyadd)
106 {
107 	struct nilfs_sufile_header *header;
108 	void *kaddr;
109 
110 	kaddr = kmap_atomic(header_bh->b_page);
111 	header = kaddr + bh_offset(header_bh);
112 	le64_add_cpu(&header->sh_ncleansegs, ncleanadd);
113 	le64_add_cpu(&header->sh_ndirtysegs, ndirtyadd);
114 	kunmap_atomic(kaddr);
115 
116 	mark_buffer_dirty(header_bh);
117 }
118 
119 /**
120  * nilfs_sufile_get_ncleansegs - return the number of clean segments
121  * @sufile: inode of segment usage file
122  */
123 unsigned long nilfs_sufile_get_ncleansegs(struct inode *sufile)
124 {
125 	return NILFS_SUI(sufile)->ncleansegs;
126 }
127 
128 /**
129  * nilfs_sufile_updatev - modify multiple segment usages at a time
130  * @sufile: inode of segment usage file
131  * @segnumv: array of segment numbers
132  * @nsegs: size of @segnumv array
133  * @create: creation flag
134  * @ndone: place to store number of modified segments on @segnumv
135  * @dofunc: primitive operation for the update
136  *
137  * Description: nilfs_sufile_updatev() repeatedly calls @dofunc
138  * against the given array of segments.  The @dofunc is called with
139  * buffers of a header block and the sufile block in which the target
140  * segment usage entry is contained.  If @ndone is given, the number
141  * of successfully modified segments from the head is stored in the
142  * place @ndone points to.
143  *
144  * Return Value: On success, zero is returned.  On error, one of the
145  * following negative error codes is returned.
146  *
147  * %-EIO - I/O error.
148  *
149  * %-ENOMEM - Insufficient amount of memory available.
150  *
151  * %-ENOENT - Given segment usage is in hole block (may be returned if
152  *            @create is zero)
153  *
154  * %-EINVAL - Invalid segment usage number
155  */
156 int nilfs_sufile_updatev(struct inode *sufile, __u64 *segnumv, size_t nsegs,
157 			 int create, size_t *ndone,
158 			 void (*dofunc)(struct inode *, __u64,
159 					struct buffer_head *,
160 					struct buffer_head *))
161 {
162 	struct buffer_head *header_bh, *bh;
163 	unsigned long blkoff, prev_blkoff;
164 	__u64 *seg;
165 	size_t nerr = 0, n = 0;
166 	int ret = 0;
167 
168 	if (unlikely(nsegs == 0))
169 		goto out;
170 
171 	down_write(&NILFS_MDT(sufile)->mi_sem);
172 	for (seg = segnumv; seg < segnumv + nsegs; seg++) {
173 		if (unlikely(*seg >= nilfs_sufile_get_nsegments(sufile))) {
174 			nilfs_warn(sufile->i_sb,
175 				   "%s: invalid segment number: %llu",
176 				   __func__, (unsigned long long)*seg);
177 			nerr++;
178 		}
179 	}
180 	if (nerr > 0) {
181 		ret = -EINVAL;
182 		goto out_sem;
183 	}
184 
185 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
186 	if (ret < 0)
187 		goto out_sem;
188 
189 	seg = segnumv;
190 	blkoff = nilfs_sufile_get_blkoff(sufile, *seg);
191 	ret = nilfs_mdt_get_block(sufile, blkoff, create, NULL, &bh);
192 	if (ret < 0)
193 		goto out_header;
194 
195 	for (;;) {
196 		dofunc(sufile, *seg, header_bh, bh);
197 
198 		if (++seg >= segnumv + nsegs)
199 			break;
200 		prev_blkoff = blkoff;
201 		blkoff = nilfs_sufile_get_blkoff(sufile, *seg);
202 		if (blkoff == prev_blkoff)
203 			continue;
204 
205 		/* get different block */
206 		brelse(bh);
207 		ret = nilfs_mdt_get_block(sufile, blkoff, create, NULL, &bh);
208 		if (unlikely(ret < 0))
209 			goto out_header;
210 	}
211 	brelse(bh);
212 
213  out_header:
214 	n = seg - segnumv;
215 	brelse(header_bh);
216  out_sem:
217 	up_write(&NILFS_MDT(sufile)->mi_sem);
218  out:
219 	if (ndone)
220 		*ndone = n;
221 	return ret;
222 }
223 
224 int nilfs_sufile_update(struct inode *sufile, __u64 segnum, int create,
225 			void (*dofunc)(struct inode *, __u64,
226 				       struct buffer_head *,
227 				       struct buffer_head *))
228 {
229 	struct buffer_head *header_bh, *bh;
230 	int ret;
231 
232 	if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
233 		nilfs_warn(sufile->i_sb, "%s: invalid segment number: %llu",
234 			   __func__, (unsigned long long)segnum);
235 		return -EINVAL;
236 	}
237 	down_write(&NILFS_MDT(sufile)->mi_sem);
238 
239 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
240 	if (ret < 0)
241 		goto out_sem;
242 
243 	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, create, &bh);
244 	if (!ret) {
245 		dofunc(sufile, segnum, header_bh, bh);
246 		brelse(bh);
247 	}
248 	brelse(header_bh);
249 
250  out_sem:
251 	up_write(&NILFS_MDT(sufile)->mi_sem);
252 	return ret;
253 }
254 
255 /**
256  * nilfs_sufile_set_alloc_range - limit range of segment to be allocated
257  * @sufile: inode of segment usage file
258  * @start: minimum segment number of allocatable region (inclusive)
259  * @end: maximum segment number of allocatable region (inclusive)
260  *
261  * Return Value: On success, 0 is returned.  On error, one of the
262  * following negative error codes is returned.
263  *
264  * %-ERANGE - invalid segment region
265  */
266 int nilfs_sufile_set_alloc_range(struct inode *sufile, __u64 start, __u64 end)
267 {
268 	struct nilfs_sufile_info *sui = NILFS_SUI(sufile);
269 	__u64 nsegs;
270 	int ret = -ERANGE;
271 
272 	down_write(&NILFS_MDT(sufile)->mi_sem);
273 	nsegs = nilfs_sufile_get_nsegments(sufile);
274 
275 	if (start <= end && end < nsegs) {
276 		sui->allocmin = start;
277 		sui->allocmax = end;
278 		ret = 0;
279 	}
280 	up_write(&NILFS_MDT(sufile)->mi_sem);
281 	return ret;
282 }
283 
284 /**
285  * nilfs_sufile_alloc - allocate a segment
286  * @sufile: inode of segment usage file
287  * @segnump: pointer to segment number
288  *
289  * Description: nilfs_sufile_alloc() allocates a clean segment.
290  *
291  * Return Value: On success, 0 is returned and the segment number of the
292  * allocated segment is stored in the place pointed by @segnump. On error, one
293  * of the following negative error codes is returned.
294  *
295  * %-EIO - I/O error.
296  *
297  * %-ENOMEM - Insufficient amount of memory available.
298  *
299  * %-ENOSPC - No clean segment left.
300  */
301 int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump)
302 {
303 	struct buffer_head *header_bh, *su_bh;
304 	struct nilfs_sufile_header *header;
305 	struct nilfs_segment_usage *su;
306 	struct nilfs_sufile_info *sui = NILFS_SUI(sufile);
307 	size_t susz = NILFS_MDT(sufile)->mi_entry_size;
308 	__u64 segnum, maxsegnum, last_alloc;
309 	void *kaddr;
310 	unsigned long nsegments, nsus, cnt;
311 	int ret, j;
312 
313 	down_write(&NILFS_MDT(sufile)->mi_sem);
314 
315 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
316 	if (ret < 0)
317 		goto out_sem;
318 	kaddr = kmap_atomic(header_bh->b_page);
319 	header = kaddr + bh_offset(header_bh);
320 	last_alloc = le64_to_cpu(header->sh_last_alloc);
321 	kunmap_atomic(kaddr);
322 
323 	nsegments = nilfs_sufile_get_nsegments(sufile);
324 	maxsegnum = sui->allocmax;
325 	segnum = last_alloc + 1;
326 	if (segnum < sui->allocmin || segnum > sui->allocmax)
327 		segnum = sui->allocmin;
328 
329 	for (cnt = 0; cnt < nsegments; cnt += nsus) {
330 		if (segnum > maxsegnum) {
331 			if (cnt < sui->allocmax - sui->allocmin + 1) {
332 				/*
333 				 * wrap around in the limited region.
334 				 * if allocation started from
335 				 * sui->allocmin, this never happens.
336 				 */
337 				segnum = sui->allocmin;
338 				maxsegnum = last_alloc;
339 			} else if (segnum > sui->allocmin &&
340 				   sui->allocmax + 1 < nsegments) {
341 				segnum = sui->allocmax + 1;
342 				maxsegnum = nsegments - 1;
343 			} else if (sui->allocmin > 0)  {
344 				segnum = 0;
345 				maxsegnum = sui->allocmin - 1;
346 			} else {
347 				break; /* never happens */
348 			}
349 		}
350 		trace_nilfs2_segment_usage_check(sufile, segnum, cnt);
351 		ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 1,
352 							   &su_bh);
353 		if (ret < 0)
354 			goto out_header;
355 		kaddr = kmap_atomic(su_bh->b_page);
356 		su = nilfs_sufile_block_get_segment_usage(
357 			sufile, segnum, su_bh, kaddr);
358 
359 		nsus = nilfs_sufile_segment_usages_in_block(
360 			sufile, segnum, maxsegnum);
361 		for (j = 0; j < nsus; j++, su = (void *)su + susz, segnum++) {
362 			if (!nilfs_segment_usage_clean(su))
363 				continue;
364 			/* found a clean segment */
365 			nilfs_segment_usage_set_dirty(su);
366 			kunmap_atomic(kaddr);
367 
368 			kaddr = kmap_atomic(header_bh->b_page);
369 			header = kaddr + bh_offset(header_bh);
370 			le64_add_cpu(&header->sh_ncleansegs, -1);
371 			le64_add_cpu(&header->sh_ndirtysegs, 1);
372 			header->sh_last_alloc = cpu_to_le64(segnum);
373 			kunmap_atomic(kaddr);
374 
375 			sui->ncleansegs--;
376 			mark_buffer_dirty(header_bh);
377 			mark_buffer_dirty(su_bh);
378 			nilfs_mdt_mark_dirty(sufile);
379 			brelse(su_bh);
380 			*segnump = segnum;
381 
382 			trace_nilfs2_segment_usage_allocated(sufile, segnum);
383 
384 			goto out_header;
385 		}
386 
387 		kunmap_atomic(kaddr);
388 		brelse(su_bh);
389 	}
390 
391 	/* no segments left */
392 	ret = -ENOSPC;
393 
394  out_header:
395 	brelse(header_bh);
396 
397  out_sem:
398 	up_write(&NILFS_MDT(sufile)->mi_sem);
399 	return ret;
400 }
401 
402 void nilfs_sufile_do_cancel_free(struct inode *sufile, __u64 segnum,
403 				 struct buffer_head *header_bh,
404 				 struct buffer_head *su_bh)
405 {
406 	struct nilfs_segment_usage *su;
407 	void *kaddr;
408 
409 	kaddr = kmap_atomic(su_bh->b_page);
410 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
411 	if (unlikely(!nilfs_segment_usage_clean(su))) {
412 		nilfs_warn(sufile->i_sb, "%s: segment %llu must be clean",
413 			   __func__, (unsigned long long)segnum);
414 		kunmap_atomic(kaddr);
415 		return;
416 	}
417 	nilfs_segment_usage_set_dirty(su);
418 	kunmap_atomic(kaddr);
419 
420 	nilfs_sufile_mod_counter(header_bh, -1, 1);
421 	NILFS_SUI(sufile)->ncleansegs--;
422 
423 	mark_buffer_dirty(su_bh);
424 	nilfs_mdt_mark_dirty(sufile);
425 }
426 
427 void nilfs_sufile_do_scrap(struct inode *sufile, __u64 segnum,
428 			   struct buffer_head *header_bh,
429 			   struct buffer_head *su_bh)
430 {
431 	struct nilfs_segment_usage *su;
432 	void *kaddr;
433 	int clean, dirty;
434 
435 	kaddr = kmap_atomic(su_bh->b_page);
436 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
437 	if (su->su_flags == cpu_to_le32(BIT(NILFS_SEGMENT_USAGE_DIRTY)) &&
438 	    su->su_nblocks == cpu_to_le32(0)) {
439 		kunmap_atomic(kaddr);
440 		return;
441 	}
442 	clean = nilfs_segment_usage_clean(su);
443 	dirty = nilfs_segment_usage_dirty(su);
444 
445 	/* make the segment garbage */
446 	su->su_lastmod = cpu_to_le64(0);
447 	su->su_nblocks = cpu_to_le32(0);
448 	su->su_flags = cpu_to_le32(BIT(NILFS_SEGMENT_USAGE_DIRTY));
449 	kunmap_atomic(kaddr);
450 
451 	nilfs_sufile_mod_counter(header_bh, clean ? (u64)-1 : 0, dirty ? 0 : 1);
452 	NILFS_SUI(sufile)->ncleansegs -= clean;
453 
454 	mark_buffer_dirty(su_bh);
455 	nilfs_mdt_mark_dirty(sufile);
456 }
457 
458 void nilfs_sufile_do_free(struct inode *sufile, __u64 segnum,
459 			  struct buffer_head *header_bh,
460 			  struct buffer_head *su_bh)
461 {
462 	struct nilfs_segment_usage *su;
463 	void *kaddr;
464 	int sudirty;
465 
466 	kaddr = kmap_atomic(su_bh->b_page);
467 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
468 	if (nilfs_segment_usage_clean(su)) {
469 		nilfs_warn(sufile->i_sb, "%s: segment %llu is already clean",
470 			   __func__, (unsigned long long)segnum);
471 		kunmap_atomic(kaddr);
472 		return;
473 	}
474 	WARN_ON(nilfs_segment_usage_error(su));
475 	WARN_ON(!nilfs_segment_usage_dirty(su));
476 
477 	sudirty = nilfs_segment_usage_dirty(su);
478 	nilfs_segment_usage_set_clean(su);
479 	kunmap_atomic(kaddr);
480 	mark_buffer_dirty(su_bh);
481 
482 	nilfs_sufile_mod_counter(header_bh, 1, sudirty ? (u64)-1 : 0);
483 	NILFS_SUI(sufile)->ncleansegs++;
484 
485 	nilfs_mdt_mark_dirty(sufile);
486 
487 	trace_nilfs2_segment_usage_freed(sufile, segnum);
488 }
489 
490 /**
491  * nilfs_sufile_mark_dirty - mark the buffer having a segment usage dirty
492  * @sufile: inode of segment usage file
493  * @segnum: segment number
494  */
495 int nilfs_sufile_mark_dirty(struct inode *sufile, __u64 segnum)
496 {
497 	struct buffer_head *bh;
498 	int ret;
499 
500 	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &bh);
501 	if (!ret) {
502 		mark_buffer_dirty(bh);
503 		nilfs_mdt_mark_dirty(sufile);
504 		brelse(bh);
505 	}
506 	return ret;
507 }
508 
509 /**
510  * nilfs_sufile_set_segment_usage - set usage of a segment
511  * @sufile: inode of segment usage file
512  * @segnum: segment number
513  * @nblocks: number of live blocks in the segment
514  * @modtime: modification time (option)
515  */
516 int nilfs_sufile_set_segment_usage(struct inode *sufile, __u64 segnum,
517 				   unsigned long nblocks, time64_t modtime)
518 {
519 	struct buffer_head *bh;
520 	struct nilfs_segment_usage *su;
521 	void *kaddr;
522 	int ret;
523 
524 	down_write(&NILFS_MDT(sufile)->mi_sem);
525 	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &bh);
526 	if (ret < 0)
527 		goto out_sem;
528 
529 	kaddr = kmap_atomic(bh->b_page);
530 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, bh, kaddr);
531 	WARN_ON(nilfs_segment_usage_error(su));
532 	if (modtime)
533 		su->su_lastmod = cpu_to_le64(modtime);
534 	su->su_nblocks = cpu_to_le32(nblocks);
535 	kunmap_atomic(kaddr);
536 
537 	mark_buffer_dirty(bh);
538 	nilfs_mdt_mark_dirty(sufile);
539 	brelse(bh);
540 
541  out_sem:
542 	up_write(&NILFS_MDT(sufile)->mi_sem);
543 	return ret;
544 }
545 
546 /**
547  * nilfs_sufile_get_stat - get segment usage statistics
548  * @sufile: inode of segment usage file
549  * @sustat: pointer to a structure of segment usage statistics
550  *
551  * Description: nilfs_sufile_get_stat() returns information about segment
552  * usage.
553  *
554  * Return Value: On success, 0 is returned, and segment usage information is
555  * stored in the place pointed by @sustat. On error, one of the following
556  * negative error codes is returned.
557  *
558  * %-EIO - I/O error.
559  *
560  * %-ENOMEM - Insufficient amount of memory available.
561  */
562 int nilfs_sufile_get_stat(struct inode *sufile, struct nilfs_sustat *sustat)
563 {
564 	struct buffer_head *header_bh;
565 	struct nilfs_sufile_header *header;
566 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
567 	void *kaddr;
568 	int ret;
569 
570 	down_read(&NILFS_MDT(sufile)->mi_sem);
571 
572 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
573 	if (ret < 0)
574 		goto out_sem;
575 
576 	kaddr = kmap_atomic(header_bh->b_page);
577 	header = kaddr + bh_offset(header_bh);
578 	sustat->ss_nsegs = nilfs_sufile_get_nsegments(sufile);
579 	sustat->ss_ncleansegs = le64_to_cpu(header->sh_ncleansegs);
580 	sustat->ss_ndirtysegs = le64_to_cpu(header->sh_ndirtysegs);
581 	sustat->ss_ctime = nilfs->ns_ctime;
582 	sustat->ss_nongc_ctime = nilfs->ns_nongc_ctime;
583 	spin_lock(&nilfs->ns_last_segment_lock);
584 	sustat->ss_prot_seq = nilfs->ns_prot_seq;
585 	spin_unlock(&nilfs->ns_last_segment_lock);
586 	kunmap_atomic(kaddr);
587 	brelse(header_bh);
588 
589  out_sem:
590 	up_read(&NILFS_MDT(sufile)->mi_sem);
591 	return ret;
592 }
593 
594 void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum,
595 			       struct buffer_head *header_bh,
596 			       struct buffer_head *su_bh)
597 {
598 	struct nilfs_segment_usage *su;
599 	void *kaddr;
600 	int suclean;
601 
602 	kaddr = kmap_atomic(su_bh->b_page);
603 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
604 	if (nilfs_segment_usage_error(su)) {
605 		kunmap_atomic(kaddr);
606 		return;
607 	}
608 	suclean = nilfs_segment_usage_clean(su);
609 	nilfs_segment_usage_set_error(su);
610 	kunmap_atomic(kaddr);
611 
612 	if (suclean) {
613 		nilfs_sufile_mod_counter(header_bh, -1, 0);
614 		NILFS_SUI(sufile)->ncleansegs--;
615 	}
616 	mark_buffer_dirty(su_bh);
617 	nilfs_mdt_mark_dirty(sufile);
618 }
619 
620 /**
621  * nilfs_sufile_truncate_range - truncate range of segment array
622  * @sufile: inode of segment usage file
623  * @start: start segment number (inclusive)
624  * @end: end segment number (inclusive)
625  *
626  * Return Value: On success, 0 is returned.  On error, one of the
627  * following negative error codes is returned.
628  *
629  * %-EIO - I/O error.
630  *
631  * %-ENOMEM - Insufficient amount of memory available.
632  *
633  * %-EINVAL - Invalid number of segments specified
634  *
635  * %-EBUSY - Dirty or active segments are present in the range
636  */
637 static int nilfs_sufile_truncate_range(struct inode *sufile,
638 				       __u64 start, __u64 end)
639 {
640 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
641 	struct buffer_head *header_bh;
642 	struct buffer_head *su_bh;
643 	struct nilfs_segment_usage *su, *su2;
644 	size_t susz = NILFS_MDT(sufile)->mi_entry_size;
645 	unsigned long segusages_per_block;
646 	unsigned long nsegs, ncleaned;
647 	__u64 segnum;
648 	void *kaddr;
649 	ssize_t n, nc;
650 	int ret;
651 	int j;
652 
653 	nsegs = nilfs_sufile_get_nsegments(sufile);
654 
655 	ret = -EINVAL;
656 	if (start > end || start >= nsegs)
657 		goto out;
658 
659 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
660 	if (ret < 0)
661 		goto out;
662 
663 	segusages_per_block = nilfs_sufile_segment_usages_per_block(sufile);
664 	ncleaned = 0;
665 
666 	for (segnum = start; segnum <= end; segnum += n) {
667 		n = min_t(unsigned long,
668 			  segusages_per_block -
669 				  nilfs_sufile_get_offset(sufile, segnum),
670 			  end - segnum + 1);
671 		ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0,
672 							   &su_bh);
673 		if (ret < 0) {
674 			if (ret != -ENOENT)
675 				goto out_header;
676 			/* hole */
677 			continue;
678 		}
679 		kaddr = kmap_atomic(su_bh->b_page);
680 		su = nilfs_sufile_block_get_segment_usage(
681 			sufile, segnum, su_bh, kaddr);
682 		su2 = su;
683 		for (j = 0; j < n; j++, su = (void *)su + susz) {
684 			if ((le32_to_cpu(su->su_flags) &
685 			     ~BIT(NILFS_SEGMENT_USAGE_ERROR)) ||
686 			    nilfs_segment_is_active(nilfs, segnum + j)) {
687 				ret = -EBUSY;
688 				kunmap_atomic(kaddr);
689 				brelse(su_bh);
690 				goto out_header;
691 			}
692 		}
693 		nc = 0;
694 		for (su = su2, j = 0; j < n; j++, su = (void *)su + susz) {
695 			if (nilfs_segment_usage_error(su)) {
696 				nilfs_segment_usage_set_clean(su);
697 				nc++;
698 			}
699 		}
700 		kunmap_atomic(kaddr);
701 		if (nc > 0) {
702 			mark_buffer_dirty(su_bh);
703 			ncleaned += nc;
704 		}
705 		brelse(su_bh);
706 
707 		if (n == segusages_per_block) {
708 			/* make hole */
709 			nilfs_sufile_delete_segment_usage_block(sufile, segnum);
710 		}
711 	}
712 	ret = 0;
713 
714 out_header:
715 	if (ncleaned > 0) {
716 		NILFS_SUI(sufile)->ncleansegs += ncleaned;
717 		nilfs_sufile_mod_counter(header_bh, ncleaned, 0);
718 		nilfs_mdt_mark_dirty(sufile);
719 	}
720 	brelse(header_bh);
721 out:
722 	return ret;
723 }
724 
725 /**
726  * nilfs_sufile_resize - resize segment array
727  * @sufile: inode of segment usage file
728  * @newnsegs: new number of segments
729  *
730  * Return Value: On success, 0 is returned.  On error, one of the
731  * following negative error codes is returned.
732  *
733  * %-EIO - I/O error.
734  *
735  * %-ENOMEM - Insufficient amount of memory available.
736  *
737  * %-ENOSPC - Enough free space is not left for shrinking
738  *
739  * %-EBUSY - Dirty or active segments exist in the region to be truncated
740  */
741 int nilfs_sufile_resize(struct inode *sufile, __u64 newnsegs)
742 {
743 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
744 	struct buffer_head *header_bh;
745 	struct nilfs_sufile_header *header;
746 	struct nilfs_sufile_info *sui = NILFS_SUI(sufile);
747 	void *kaddr;
748 	unsigned long nsegs, nrsvsegs;
749 	int ret = 0;
750 
751 	down_write(&NILFS_MDT(sufile)->mi_sem);
752 
753 	nsegs = nilfs_sufile_get_nsegments(sufile);
754 	if (nsegs == newnsegs)
755 		goto out;
756 
757 	ret = -ENOSPC;
758 	nrsvsegs = nilfs_nrsvsegs(nilfs, newnsegs);
759 	if (newnsegs < nsegs && nsegs - newnsegs + nrsvsegs > sui->ncleansegs)
760 		goto out;
761 
762 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
763 	if (ret < 0)
764 		goto out;
765 
766 	if (newnsegs > nsegs) {
767 		sui->ncleansegs += newnsegs - nsegs;
768 	} else /* newnsegs < nsegs */ {
769 		ret = nilfs_sufile_truncate_range(sufile, newnsegs, nsegs - 1);
770 		if (ret < 0)
771 			goto out_header;
772 
773 		sui->ncleansegs -= nsegs - newnsegs;
774 	}
775 
776 	kaddr = kmap_atomic(header_bh->b_page);
777 	header = kaddr + bh_offset(header_bh);
778 	header->sh_ncleansegs = cpu_to_le64(sui->ncleansegs);
779 	kunmap_atomic(kaddr);
780 
781 	mark_buffer_dirty(header_bh);
782 	nilfs_mdt_mark_dirty(sufile);
783 	nilfs_set_nsegments(nilfs, newnsegs);
784 
785 out_header:
786 	brelse(header_bh);
787 out:
788 	up_write(&NILFS_MDT(sufile)->mi_sem);
789 	return ret;
790 }
791 
792 /**
793  * nilfs_sufile_get_suinfo -
794  * @sufile: inode of segment usage file
795  * @segnum: segment number to start looking
796  * @buf: array of suinfo
797  * @sisz: byte size of suinfo
798  * @nsi: size of suinfo array
799  *
800  * Description:
801  *
802  * Return Value: On success, 0 is returned and .... On error, one of the
803  * following negative error codes is returned.
804  *
805  * %-EIO - I/O error.
806  *
807  * %-ENOMEM - Insufficient amount of memory available.
808  */
809 ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum, void *buf,
810 				unsigned int sisz, size_t nsi)
811 {
812 	struct buffer_head *su_bh;
813 	struct nilfs_segment_usage *su;
814 	struct nilfs_suinfo *si = buf;
815 	size_t susz = NILFS_MDT(sufile)->mi_entry_size;
816 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
817 	void *kaddr;
818 	unsigned long nsegs, segusages_per_block;
819 	ssize_t n;
820 	int ret, i, j;
821 
822 	down_read(&NILFS_MDT(sufile)->mi_sem);
823 
824 	segusages_per_block = nilfs_sufile_segment_usages_per_block(sufile);
825 	nsegs = min_t(unsigned long,
826 		      nilfs_sufile_get_nsegments(sufile) - segnum,
827 		      nsi);
828 	for (i = 0; i < nsegs; i += n, segnum += n) {
829 		n = min_t(unsigned long,
830 			  segusages_per_block -
831 				  nilfs_sufile_get_offset(sufile, segnum),
832 			  nsegs - i);
833 		ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0,
834 							   &su_bh);
835 		if (ret < 0) {
836 			if (ret != -ENOENT)
837 				goto out;
838 			/* hole */
839 			memset(si, 0, sisz * n);
840 			si = (void *)si + sisz * n;
841 			continue;
842 		}
843 
844 		kaddr = kmap_atomic(su_bh->b_page);
845 		su = nilfs_sufile_block_get_segment_usage(
846 			sufile, segnum, su_bh, kaddr);
847 		for (j = 0; j < n;
848 		     j++, su = (void *)su + susz, si = (void *)si + sisz) {
849 			si->sui_lastmod = le64_to_cpu(su->su_lastmod);
850 			si->sui_nblocks = le32_to_cpu(su->su_nblocks);
851 			si->sui_flags = le32_to_cpu(su->su_flags) &
852 				~BIT(NILFS_SEGMENT_USAGE_ACTIVE);
853 			if (nilfs_segment_is_active(nilfs, segnum + j))
854 				si->sui_flags |=
855 					BIT(NILFS_SEGMENT_USAGE_ACTIVE);
856 		}
857 		kunmap_atomic(kaddr);
858 		brelse(su_bh);
859 	}
860 	ret = nsegs;
861 
862  out:
863 	up_read(&NILFS_MDT(sufile)->mi_sem);
864 	return ret;
865 }
866 
867 /**
868  * nilfs_sufile_set_suinfo - sets segment usage info
869  * @sufile: inode of segment usage file
870  * @buf: array of suinfo_update
871  * @supsz: byte size of suinfo_update
872  * @nsup: size of suinfo_update array
873  *
874  * Description: Takes an array of nilfs_suinfo_update structs and updates
875  * segment usage accordingly. Only the fields indicated by the sup_flags
876  * are updated.
877  *
878  * Return Value: On success, 0 is returned. On error, one of the
879  * following negative error codes is returned.
880  *
881  * %-EIO - I/O error.
882  *
883  * %-ENOMEM - Insufficient amount of memory available.
884  *
885  * %-EINVAL - Invalid values in input (segment number, flags or nblocks)
886  */
887 ssize_t nilfs_sufile_set_suinfo(struct inode *sufile, void *buf,
888 				unsigned int supsz, size_t nsup)
889 {
890 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
891 	struct buffer_head *header_bh, *bh;
892 	struct nilfs_suinfo_update *sup, *supend = buf + supsz * nsup;
893 	struct nilfs_segment_usage *su;
894 	void *kaddr;
895 	unsigned long blkoff, prev_blkoff;
896 	int cleansi, cleansu, dirtysi, dirtysu;
897 	long ncleaned = 0, ndirtied = 0;
898 	int ret = 0;
899 
900 	if (unlikely(nsup == 0))
901 		return ret;
902 
903 	for (sup = buf; sup < supend; sup = (void *)sup + supsz) {
904 		if (sup->sup_segnum >= nilfs->ns_nsegments
905 			|| (sup->sup_flags &
906 				(~0UL << __NR_NILFS_SUINFO_UPDATE_FIELDS))
907 			|| (nilfs_suinfo_update_nblocks(sup) &&
908 				sup->sup_sui.sui_nblocks >
909 				nilfs->ns_blocks_per_segment))
910 			return -EINVAL;
911 	}
912 
913 	down_write(&NILFS_MDT(sufile)->mi_sem);
914 
915 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
916 	if (ret < 0)
917 		goto out_sem;
918 
919 	sup = buf;
920 	blkoff = nilfs_sufile_get_blkoff(sufile, sup->sup_segnum);
921 	ret = nilfs_mdt_get_block(sufile, blkoff, 1, NULL, &bh);
922 	if (ret < 0)
923 		goto out_header;
924 
925 	for (;;) {
926 		kaddr = kmap_atomic(bh->b_page);
927 		su = nilfs_sufile_block_get_segment_usage(
928 			sufile, sup->sup_segnum, bh, kaddr);
929 
930 		if (nilfs_suinfo_update_lastmod(sup))
931 			su->su_lastmod = cpu_to_le64(sup->sup_sui.sui_lastmod);
932 
933 		if (nilfs_suinfo_update_nblocks(sup))
934 			su->su_nblocks = cpu_to_le32(sup->sup_sui.sui_nblocks);
935 
936 		if (nilfs_suinfo_update_flags(sup)) {
937 			/*
938 			 * Active flag is a virtual flag projected by running
939 			 * nilfs kernel code - drop it not to write it to
940 			 * disk.
941 			 */
942 			sup->sup_sui.sui_flags &=
943 					~BIT(NILFS_SEGMENT_USAGE_ACTIVE);
944 
945 			cleansi = nilfs_suinfo_clean(&sup->sup_sui);
946 			cleansu = nilfs_segment_usage_clean(su);
947 			dirtysi = nilfs_suinfo_dirty(&sup->sup_sui);
948 			dirtysu = nilfs_segment_usage_dirty(su);
949 
950 			if (cleansi && !cleansu)
951 				++ncleaned;
952 			else if (!cleansi && cleansu)
953 				--ncleaned;
954 
955 			if (dirtysi && !dirtysu)
956 				++ndirtied;
957 			else if (!dirtysi && dirtysu)
958 				--ndirtied;
959 
960 			su->su_flags = cpu_to_le32(sup->sup_sui.sui_flags);
961 		}
962 
963 		kunmap_atomic(kaddr);
964 
965 		sup = (void *)sup + supsz;
966 		if (sup >= supend)
967 			break;
968 
969 		prev_blkoff = blkoff;
970 		blkoff = nilfs_sufile_get_blkoff(sufile, sup->sup_segnum);
971 		if (blkoff == prev_blkoff)
972 			continue;
973 
974 		/* get different block */
975 		mark_buffer_dirty(bh);
976 		put_bh(bh);
977 		ret = nilfs_mdt_get_block(sufile, blkoff, 1, NULL, &bh);
978 		if (unlikely(ret < 0))
979 			goto out_mark;
980 	}
981 	mark_buffer_dirty(bh);
982 	put_bh(bh);
983 
984  out_mark:
985 	if (ncleaned || ndirtied) {
986 		nilfs_sufile_mod_counter(header_bh, (u64)ncleaned,
987 				(u64)ndirtied);
988 		NILFS_SUI(sufile)->ncleansegs += ncleaned;
989 	}
990 	nilfs_mdt_mark_dirty(sufile);
991  out_header:
992 	put_bh(header_bh);
993  out_sem:
994 	up_write(&NILFS_MDT(sufile)->mi_sem);
995 	return ret;
996 }
997 
998 /**
999  * nilfs_sufile_trim_fs() - trim ioctl handle function
1000  * @sufile: inode of segment usage file
1001  * @range: fstrim_range structure
1002  *
1003  * start:	First Byte to trim
1004  * len:		number of Bytes to trim from start
1005  * minlen:	minimum extent length in Bytes
1006  *
1007  * Decription: nilfs_sufile_trim_fs goes through all segments containing bytes
1008  * from start to start+len. start is rounded up to the next block boundary
1009  * and start+len is rounded down. For each clean segment blkdev_issue_discard
1010  * function is invoked.
1011  *
1012  * Return Value: On success, 0 is returned or negative error code, otherwise.
1013  */
1014 int nilfs_sufile_trim_fs(struct inode *sufile, struct fstrim_range *range)
1015 {
1016 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
1017 	struct buffer_head *su_bh;
1018 	struct nilfs_segment_usage *su;
1019 	void *kaddr;
1020 	size_t n, i, susz = NILFS_MDT(sufile)->mi_entry_size;
1021 	sector_t seg_start, seg_end, start_block, end_block;
1022 	sector_t start = 0, nblocks = 0;
1023 	u64 segnum, segnum_end, minlen, len, max_blocks, ndiscarded = 0;
1024 	int ret = 0;
1025 	unsigned int sects_per_block;
1026 
1027 	sects_per_block = (1 << nilfs->ns_blocksize_bits) /
1028 			bdev_logical_block_size(nilfs->ns_bdev);
1029 	len = range->len >> nilfs->ns_blocksize_bits;
1030 	minlen = range->minlen >> nilfs->ns_blocksize_bits;
1031 	max_blocks = ((u64)nilfs->ns_nsegments * nilfs->ns_blocks_per_segment);
1032 
1033 	if (!len || range->start >= max_blocks << nilfs->ns_blocksize_bits)
1034 		return -EINVAL;
1035 
1036 	start_block = (range->start + nilfs->ns_blocksize - 1) >>
1037 			nilfs->ns_blocksize_bits;
1038 
1039 	/*
1040 	 * range->len can be very large (actually, it is set to
1041 	 * ULLONG_MAX by default) - truncate upper end of the range
1042 	 * carefully so as not to overflow.
1043 	 */
1044 	if (max_blocks - start_block < len)
1045 		end_block = max_blocks - 1;
1046 	else
1047 		end_block = start_block + len - 1;
1048 
1049 	segnum = nilfs_get_segnum_of_block(nilfs, start_block);
1050 	segnum_end = nilfs_get_segnum_of_block(nilfs, end_block);
1051 
1052 	down_read(&NILFS_MDT(sufile)->mi_sem);
1053 
1054 	while (segnum <= segnum_end) {
1055 		n = nilfs_sufile_segment_usages_in_block(sufile, segnum,
1056 				segnum_end);
1057 
1058 		ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0,
1059 							   &su_bh);
1060 		if (ret < 0) {
1061 			if (ret != -ENOENT)
1062 				goto out_sem;
1063 			/* hole */
1064 			segnum += n;
1065 			continue;
1066 		}
1067 
1068 		kaddr = kmap_atomic(su_bh->b_page);
1069 		su = nilfs_sufile_block_get_segment_usage(sufile, segnum,
1070 				su_bh, kaddr);
1071 		for (i = 0; i < n; ++i, ++segnum, su = (void *)su + susz) {
1072 			if (!nilfs_segment_usage_clean(su))
1073 				continue;
1074 
1075 			nilfs_get_segment_range(nilfs, segnum, &seg_start,
1076 						&seg_end);
1077 
1078 			if (!nblocks) {
1079 				/* start new extent */
1080 				start = seg_start;
1081 				nblocks = seg_end - seg_start + 1;
1082 				continue;
1083 			}
1084 
1085 			if (start + nblocks == seg_start) {
1086 				/* add to previous extent */
1087 				nblocks += seg_end - seg_start + 1;
1088 				continue;
1089 			}
1090 
1091 			/* discard previous extent */
1092 			if (start < start_block) {
1093 				nblocks -= start_block - start;
1094 				start = start_block;
1095 			}
1096 
1097 			if (nblocks >= minlen) {
1098 				kunmap_atomic(kaddr);
1099 
1100 				ret = blkdev_issue_discard(nilfs->ns_bdev,
1101 						start * sects_per_block,
1102 						nblocks * sects_per_block,
1103 						GFP_NOFS, 0);
1104 				if (ret < 0) {
1105 					put_bh(su_bh);
1106 					goto out_sem;
1107 				}
1108 
1109 				ndiscarded += nblocks;
1110 				kaddr = kmap_atomic(su_bh->b_page);
1111 				su = nilfs_sufile_block_get_segment_usage(
1112 					sufile, segnum, su_bh, kaddr);
1113 			}
1114 
1115 			/* start new extent */
1116 			start = seg_start;
1117 			nblocks = seg_end - seg_start + 1;
1118 		}
1119 		kunmap_atomic(kaddr);
1120 		put_bh(su_bh);
1121 	}
1122 
1123 
1124 	if (nblocks) {
1125 		/* discard last extent */
1126 		if (start < start_block) {
1127 			nblocks -= start_block - start;
1128 			start = start_block;
1129 		}
1130 		if (start + nblocks > end_block + 1)
1131 			nblocks = end_block - start + 1;
1132 
1133 		if (nblocks >= minlen) {
1134 			ret = blkdev_issue_discard(nilfs->ns_bdev,
1135 					start * sects_per_block,
1136 					nblocks * sects_per_block,
1137 					GFP_NOFS, 0);
1138 			if (!ret)
1139 				ndiscarded += nblocks;
1140 		}
1141 	}
1142 
1143 out_sem:
1144 	up_read(&NILFS_MDT(sufile)->mi_sem);
1145 
1146 	range->len = ndiscarded << nilfs->ns_blocksize_bits;
1147 	return ret;
1148 }
1149 
1150 /**
1151  * nilfs_sufile_read - read or get sufile inode
1152  * @sb: super block instance
1153  * @susize: size of a segment usage entry
1154  * @raw_inode: on-disk sufile inode
1155  * @inodep: buffer to store the inode
1156  */
1157 int nilfs_sufile_read(struct super_block *sb, size_t susize,
1158 		      struct nilfs_inode *raw_inode, struct inode **inodep)
1159 {
1160 	struct inode *sufile;
1161 	struct nilfs_sufile_info *sui;
1162 	struct buffer_head *header_bh;
1163 	struct nilfs_sufile_header *header;
1164 	void *kaddr;
1165 	int err;
1166 
1167 	if (susize > sb->s_blocksize) {
1168 		nilfs_err(sb, "too large segment usage size: %zu bytes",
1169 			  susize);
1170 		return -EINVAL;
1171 	} else if (susize < NILFS_MIN_SEGMENT_USAGE_SIZE) {
1172 		nilfs_err(sb, "too small segment usage size: %zu bytes",
1173 			  susize);
1174 		return -EINVAL;
1175 	}
1176 
1177 	sufile = nilfs_iget_locked(sb, NULL, NILFS_SUFILE_INO);
1178 	if (unlikely(!sufile))
1179 		return -ENOMEM;
1180 	if (!(sufile->i_state & I_NEW))
1181 		goto out;
1182 
1183 	err = nilfs_mdt_init(sufile, NILFS_MDT_GFP, sizeof(*sui));
1184 	if (err)
1185 		goto failed;
1186 
1187 	nilfs_mdt_set_entry_size(sufile, susize,
1188 				 sizeof(struct nilfs_sufile_header));
1189 
1190 	err = nilfs_read_inode_common(sufile, raw_inode);
1191 	if (err)
1192 		goto failed;
1193 
1194 	err = nilfs_sufile_get_header_block(sufile, &header_bh);
1195 	if (err)
1196 		goto failed;
1197 
1198 	sui = NILFS_SUI(sufile);
1199 	kaddr = kmap_atomic(header_bh->b_page);
1200 	header = kaddr + bh_offset(header_bh);
1201 	sui->ncleansegs = le64_to_cpu(header->sh_ncleansegs);
1202 	kunmap_atomic(kaddr);
1203 	brelse(header_bh);
1204 
1205 	sui->allocmax = nilfs_sufile_get_nsegments(sufile) - 1;
1206 	sui->allocmin = 0;
1207 
1208 	unlock_new_inode(sufile);
1209  out:
1210 	*inodep = sufile;
1211 	return 0;
1212  failed:
1213 	iget_failed(sufile);
1214 	return err;
1215 }
1216