xref: /openbmc/linux/fs/nilfs2/sufile.c (revision 5b4cb650)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * sufile.c - NILFS segment usage file.
4  *
5  * Copyright (C) 2006-2008 Nippon Telegraph and Telephone Corporation.
6  *
7  * Written by Koji Sato.
8  * Revised by Ryusuke Konishi.
9  */
10 
11 #include <linux/kernel.h>
12 #include <linux/fs.h>
13 #include <linux/string.h>
14 #include <linux/buffer_head.h>
15 #include <linux/errno.h>
16 #include "mdt.h"
17 #include "sufile.h"
18 
19 #include <trace/events/nilfs2.h>
20 
21 /**
22  * struct nilfs_sufile_info - on-memory private data of sufile
23  * @mi: on-memory private data of metadata file
24  * @ncleansegs: number of clean segments
25  * @allocmin: lower limit of allocatable segment range
26  * @allocmax: upper limit of allocatable segment range
27  */
28 struct nilfs_sufile_info {
29 	struct nilfs_mdt_info mi;
30 	unsigned long ncleansegs;/* number of clean segments */
31 	__u64 allocmin;		/* lower limit of allocatable segment range */
32 	__u64 allocmax;		/* upper limit of allocatable segment range */
33 };
34 
35 static inline struct nilfs_sufile_info *NILFS_SUI(struct inode *sufile)
36 {
37 	return (struct nilfs_sufile_info *)NILFS_MDT(sufile);
38 }
39 
40 static inline unsigned long
41 nilfs_sufile_segment_usages_per_block(const struct inode *sufile)
42 {
43 	return NILFS_MDT(sufile)->mi_entries_per_block;
44 }
45 
46 static unsigned long
47 nilfs_sufile_get_blkoff(const struct inode *sufile, __u64 segnum)
48 {
49 	__u64 t = segnum + NILFS_MDT(sufile)->mi_first_entry_offset;
50 
51 	do_div(t, nilfs_sufile_segment_usages_per_block(sufile));
52 	return (unsigned long)t;
53 }
54 
55 static unsigned long
56 nilfs_sufile_get_offset(const struct inode *sufile, __u64 segnum)
57 {
58 	__u64 t = segnum + NILFS_MDT(sufile)->mi_first_entry_offset;
59 
60 	return do_div(t, nilfs_sufile_segment_usages_per_block(sufile));
61 }
62 
63 static unsigned long
64 nilfs_sufile_segment_usages_in_block(const struct inode *sufile, __u64 curr,
65 				     __u64 max)
66 {
67 	return min_t(unsigned long,
68 		     nilfs_sufile_segment_usages_per_block(sufile) -
69 		     nilfs_sufile_get_offset(sufile, curr),
70 		     max - curr + 1);
71 }
72 
73 static struct nilfs_segment_usage *
74 nilfs_sufile_block_get_segment_usage(const struct inode *sufile, __u64 segnum,
75 				     struct buffer_head *bh, void *kaddr)
76 {
77 	return kaddr + bh_offset(bh) +
78 		nilfs_sufile_get_offset(sufile, segnum) *
79 		NILFS_MDT(sufile)->mi_entry_size;
80 }
81 
82 static inline int nilfs_sufile_get_header_block(struct inode *sufile,
83 						struct buffer_head **bhp)
84 {
85 	return nilfs_mdt_get_block(sufile, 0, 0, NULL, bhp);
86 }
87 
88 static inline int
89 nilfs_sufile_get_segment_usage_block(struct inode *sufile, __u64 segnum,
90 				     int create, struct buffer_head **bhp)
91 {
92 	return nilfs_mdt_get_block(sufile,
93 				   nilfs_sufile_get_blkoff(sufile, segnum),
94 				   create, NULL, bhp);
95 }
96 
97 static int nilfs_sufile_delete_segment_usage_block(struct inode *sufile,
98 						   __u64 segnum)
99 {
100 	return nilfs_mdt_delete_block(sufile,
101 				      nilfs_sufile_get_blkoff(sufile, segnum));
102 }
103 
104 static void nilfs_sufile_mod_counter(struct buffer_head *header_bh,
105 				     u64 ncleanadd, u64 ndirtyadd)
106 {
107 	struct nilfs_sufile_header *header;
108 	void *kaddr;
109 
110 	kaddr = kmap_atomic(header_bh->b_page);
111 	header = kaddr + bh_offset(header_bh);
112 	le64_add_cpu(&header->sh_ncleansegs, ncleanadd);
113 	le64_add_cpu(&header->sh_ndirtysegs, ndirtyadd);
114 	kunmap_atomic(kaddr);
115 
116 	mark_buffer_dirty(header_bh);
117 }
118 
119 /**
120  * nilfs_sufile_get_ncleansegs - return the number of clean segments
121  * @sufile: inode of segment usage file
122  */
123 unsigned long nilfs_sufile_get_ncleansegs(struct inode *sufile)
124 {
125 	return NILFS_SUI(sufile)->ncleansegs;
126 }
127 
128 /**
129  * nilfs_sufile_updatev - modify multiple segment usages at a time
130  * @sufile: inode of segment usage file
131  * @segnumv: array of segment numbers
132  * @nsegs: size of @segnumv array
133  * @create: creation flag
134  * @ndone: place to store number of modified segments on @segnumv
135  * @dofunc: primitive operation for the update
136  *
137  * Description: nilfs_sufile_updatev() repeatedly calls @dofunc
138  * against the given array of segments.  The @dofunc is called with
139  * buffers of a header block and the sufile block in which the target
140  * segment usage entry is contained.  If @ndone is given, the number
141  * of successfully modified segments from the head is stored in the
142  * place @ndone points to.
143  *
144  * Return Value: On success, zero is returned.  On error, one of the
145  * following negative error codes is returned.
146  *
147  * %-EIO - I/O error.
148  *
149  * %-ENOMEM - Insufficient amount of memory available.
150  *
151  * %-ENOENT - Given segment usage is in hole block (may be returned if
152  *            @create is zero)
153  *
154  * %-EINVAL - Invalid segment usage number
155  */
156 int nilfs_sufile_updatev(struct inode *sufile, __u64 *segnumv, size_t nsegs,
157 			 int create, size_t *ndone,
158 			 void (*dofunc)(struct inode *, __u64,
159 					struct buffer_head *,
160 					struct buffer_head *))
161 {
162 	struct buffer_head *header_bh, *bh;
163 	unsigned long blkoff, prev_blkoff;
164 	__u64 *seg;
165 	size_t nerr = 0, n = 0;
166 	int ret = 0;
167 
168 	if (unlikely(nsegs == 0))
169 		goto out;
170 
171 	down_write(&NILFS_MDT(sufile)->mi_sem);
172 	for (seg = segnumv; seg < segnumv + nsegs; seg++) {
173 		if (unlikely(*seg >= nilfs_sufile_get_nsegments(sufile))) {
174 			nilfs_msg(sufile->i_sb, KERN_WARNING,
175 				  "%s: invalid segment number: %llu",
176 				  __func__, (unsigned long long)*seg);
177 			nerr++;
178 		}
179 	}
180 	if (nerr > 0) {
181 		ret = -EINVAL;
182 		goto out_sem;
183 	}
184 
185 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
186 	if (ret < 0)
187 		goto out_sem;
188 
189 	seg = segnumv;
190 	blkoff = nilfs_sufile_get_blkoff(sufile, *seg);
191 	ret = nilfs_mdt_get_block(sufile, blkoff, create, NULL, &bh);
192 	if (ret < 0)
193 		goto out_header;
194 
195 	for (;;) {
196 		dofunc(sufile, *seg, header_bh, bh);
197 
198 		if (++seg >= segnumv + nsegs)
199 			break;
200 		prev_blkoff = blkoff;
201 		blkoff = nilfs_sufile_get_blkoff(sufile, *seg);
202 		if (blkoff == prev_blkoff)
203 			continue;
204 
205 		/* get different block */
206 		brelse(bh);
207 		ret = nilfs_mdt_get_block(sufile, blkoff, create, NULL, &bh);
208 		if (unlikely(ret < 0))
209 			goto out_header;
210 	}
211 	brelse(bh);
212 
213  out_header:
214 	n = seg - segnumv;
215 	brelse(header_bh);
216  out_sem:
217 	up_write(&NILFS_MDT(sufile)->mi_sem);
218  out:
219 	if (ndone)
220 		*ndone = n;
221 	return ret;
222 }
223 
224 int nilfs_sufile_update(struct inode *sufile, __u64 segnum, int create,
225 			void (*dofunc)(struct inode *, __u64,
226 				       struct buffer_head *,
227 				       struct buffer_head *))
228 {
229 	struct buffer_head *header_bh, *bh;
230 	int ret;
231 
232 	if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
233 		nilfs_msg(sufile->i_sb, KERN_WARNING,
234 			  "%s: invalid segment number: %llu",
235 			  __func__, (unsigned long long)segnum);
236 		return -EINVAL;
237 	}
238 	down_write(&NILFS_MDT(sufile)->mi_sem);
239 
240 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
241 	if (ret < 0)
242 		goto out_sem;
243 
244 	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, create, &bh);
245 	if (!ret) {
246 		dofunc(sufile, segnum, header_bh, bh);
247 		brelse(bh);
248 	}
249 	brelse(header_bh);
250 
251  out_sem:
252 	up_write(&NILFS_MDT(sufile)->mi_sem);
253 	return ret;
254 }
255 
256 /**
257  * nilfs_sufile_set_alloc_range - limit range of segment to be allocated
258  * @sufile: inode of segment usage file
259  * @start: minimum segment number of allocatable region (inclusive)
260  * @end: maximum segment number of allocatable region (inclusive)
261  *
262  * Return Value: On success, 0 is returned.  On error, one of the
263  * following negative error codes is returned.
264  *
265  * %-ERANGE - invalid segment region
266  */
267 int nilfs_sufile_set_alloc_range(struct inode *sufile, __u64 start, __u64 end)
268 {
269 	struct nilfs_sufile_info *sui = NILFS_SUI(sufile);
270 	__u64 nsegs;
271 	int ret = -ERANGE;
272 
273 	down_write(&NILFS_MDT(sufile)->mi_sem);
274 	nsegs = nilfs_sufile_get_nsegments(sufile);
275 
276 	if (start <= end && end < nsegs) {
277 		sui->allocmin = start;
278 		sui->allocmax = end;
279 		ret = 0;
280 	}
281 	up_write(&NILFS_MDT(sufile)->mi_sem);
282 	return ret;
283 }
284 
285 /**
286  * nilfs_sufile_alloc - allocate a segment
287  * @sufile: inode of segment usage file
288  * @segnump: pointer to segment number
289  *
290  * Description: nilfs_sufile_alloc() allocates a clean segment.
291  *
292  * Return Value: On success, 0 is returned and the segment number of the
293  * allocated segment is stored in the place pointed by @segnump. On error, one
294  * of the following negative error codes is returned.
295  *
296  * %-EIO - I/O error.
297  *
298  * %-ENOMEM - Insufficient amount of memory available.
299  *
300  * %-ENOSPC - No clean segment left.
301  */
302 int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump)
303 {
304 	struct buffer_head *header_bh, *su_bh;
305 	struct nilfs_sufile_header *header;
306 	struct nilfs_segment_usage *su;
307 	struct nilfs_sufile_info *sui = NILFS_SUI(sufile);
308 	size_t susz = NILFS_MDT(sufile)->mi_entry_size;
309 	__u64 segnum, maxsegnum, last_alloc;
310 	void *kaddr;
311 	unsigned long nsegments, nsus, cnt;
312 	int ret, j;
313 
314 	down_write(&NILFS_MDT(sufile)->mi_sem);
315 
316 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
317 	if (ret < 0)
318 		goto out_sem;
319 	kaddr = kmap_atomic(header_bh->b_page);
320 	header = kaddr + bh_offset(header_bh);
321 	last_alloc = le64_to_cpu(header->sh_last_alloc);
322 	kunmap_atomic(kaddr);
323 
324 	nsegments = nilfs_sufile_get_nsegments(sufile);
325 	maxsegnum = sui->allocmax;
326 	segnum = last_alloc + 1;
327 	if (segnum < sui->allocmin || segnum > sui->allocmax)
328 		segnum = sui->allocmin;
329 
330 	for (cnt = 0; cnt < nsegments; cnt += nsus) {
331 		if (segnum > maxsegnum) {
332 			if (cnt < sui->allocmax - sui->allocmin + 1) {
333 				/*
334 				 * wrap around in the limited region.
335 				 * if allocation started from
336 				 * sui->allocmin, this never happens.
337 				 */
338 				segnum = sui->allocmin;
339 				maxsegnum = last_alloc;
340 			} else if (segnum > sui->allocmin &&
341 				   sui->allocmax + 1 < nsegments) {
342 				segnum = sui->allocmax + 1;
343 				maxsegnum = nsegments - 1;
344 			} else if (sui->allocmin > 0)  {
345 				segnum = 0;
346 				maxsegnum = sui->allocmin - 1;
347 			} else {
348 				break; /* never happens */
349 			}
350 		}
351 		trace_nilfs2_segment_usage_check(sufile, segnum, cnt);
352 		ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 1,
353 							   &su_bh);
354 		if (ret < 0)
355 			goto out_header;
356 		kaddr = kmap_atomic(su_bh->b_page);
357 		su = nilfs_sufile_block_get_segment_usage(
358 			sufile, segnum, su_bh, kaddr);
359 
360 		nsus = nilfs_sufile_segment_usages_in_block(
361 			sufile, segnum, maxsegnum);
362 		for (j = 0; j < nsus; j++, su = (void *)su + susz, segnum++) {
363 			if (!nilfs_segment_usage_clean(su))
364 				continue;
365 			/* found a clean segment */
366 			nilfs_segment_usage_set_dirty(su);
367 			kunmap_atomic(kaddr);
368 
369 			kaddr = kmap_atomic(header_bh->b_page);
370 			header = kaddr + bh_offset(header_bh);
371 			le64_add_cpu(&header->sh_ncleansegs, -1);
372 			le64_add_cpu(&header->sh_ndirtysegs, 1);
373 			header->sh_last_alloc = cpu_to_le64(segnum);
374 			kunmap_atomic(kaddr);
375 
376 			sui->ncleansegs--;
377 			mark_buffer_dirty(header_bh);
378 			mark_buffer_dirty(su_bh);
379 			nilfs_mdt_mark_dirty(sufile);
380 			brelse(su_bh);
381 			*segnump = segnum;
382 
383 			trace_nilfs2_segment_usage_allocated(sufile, segnum);
384 
385 			goto out_header;
386 		}
387 
388 		kunmap_atomic(kaddr);
389 		brelse(su_bh);
390 	}
391 
392 	/* no segments left */
393 	ret = -ENOSPC;
394 
395  out_header:
396 	brelse(header_bh);
397 
398  out_sem:
399 	up_write(&NILFS_MDT(sufile)->mi_sem);
400 	return ret;
401 }
402 
403 void nilfs_sufile_do_cancel_free(struct inode *sufile, __u64 segnum,
404 				 struct buffer_head *header_bh,
405 				 struct buffer_head *su_bh)
406 {
407 	struct nilfs_segment_usage *su;
408 	void *kaddr;
409 
410 	kaddr = kmap_atomic(su_bh->b_page);
411 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
412 	if (unlikely(!nilfs_segment_usage_clean(su))) {
413 		nilfs_msg(sufile->i_sb, KERN_WARNING,
414 			  "%s: segment %llu must be clean", __func__,
415 			  (unsigned long long)segnum);
416 		kunmap_atomic(kaddr);
417 		return;
418 	}
419 	nilfs_segment_usage_set_dirty(su);
420 	kunmap_atomic(kaddr);
421 
422 	nilfs_sufile_mod_counter(header_bh, -1, 1);
423 	NILFS_SUI(sufile)->ncleansegs--;
424 
425 	mark_buffer_dirty(su_bh);
426 	nilfs_mdt_mark_dirty(sufile);
427 }
428 
429 void nilfs_sufile_do_scrap(struct inode *sufile, __u64 segnum,
430 			   struct buffer_head *header_bh,
431 			   struct buffer_head *su_bh)
432 {
433 	struct nilfs_segment_usage *su;
434 	void *kaddr;
435 	int clean, dirty;
436 
437 	kaddr = kmap_atomic(su_bh->b_page);
438 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
439 	if (su->su_flags == cpu_to_le32(BIT(NILFS_SEGMENT_USAGE_DIRTY)) &&
440 	    su->su_nblocks == cpu_to_le32(0)) {
441 		kunmap_atomic(kaddr);
442 		return;
443 	}
444 	clean = nilfs_segment_usage_clean(su);
445 	dirty = nilfs_segment_usage_dirty(su);
446 
447 	/* make the segment garbage */
448 	su->su_lastmod = cpu_to_le64(0);
449 	su->su_nblocks = cpu_to_le32(0);
450 	su->su_flags = cpu_to_le32(BIT(NILFS_SEGMENT_USAGE_DIRTY));
451 	kunmap_atomic(kaddr);
452 
453 	nilfs_sufile_mod_counter(header_bh, clean ? (u64)-1 : 0, dirty ? 0 : 1);
454 	NILFS_SUI(sufile)->ncleansegs -= clean;
455 
456 	mark_buffer_dirty(su_bh);
457 	nilfs_mdt_mark_dirty(sufile);
458 }
459 
460 void nilfs_sufile_do_free(struct inode *sufile, __u64 segnum,
461 			  struct buffer_head *header_bh,
462 			  struct buffer_head *su_bh)
463 {
464 	struct nilfs_segment_usage *su;
465 	void *kaddr;
466 	int sudirty;
467 
468 	kaddr = kmap_atomic(su_bh->b_page);
469 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
470 	if (nilfs_segment_usage_clean(su)) {
471 		nilfs_msg(sufile->i_sb, KERN_WARNING,
472 			  "%s: segment %llu is already clean",
473 			  __func__, (unsigned long long)segnum);
474 		kunmap_atomic(kaddr);
475 		return;
476 	}
477 	WARN_ON(nilfs_segment_usage_error(su));
478 	WARN_ON(!nilfs_segment_usage_dirty(su));
479 
480 	sudirty = nilfs_segment_usage_dirty(su);
481 	nilfs_segment_usage_set_clean(su);
482 	kunmap_atomic(kaddr);
483 	mark_buffer_dirty(su_bh);
484 
485 	nilfs_sufile_mod_counter(header_bh, 1, sudirty ? (u64)-1 : 0);
486 	NILFS_SUI(sufile)->ncleansegs++;
487 
488 	nilfs_mdt_mark_dirty(sufile);
489 
490 	trace_nilfs2_segment_usage_freed(sufile, segnum);
491 }
492 
493 /**
494  * nilfs_sufile_mark_dirty - mark the buffer having a segment usage dirty
495  * @sufile: inode of segment usage file
496  * @segnum: segment number
497  */
498 int nilfs_sufile_mark_dirty(struct inode *sufile, __u64 segnum)
499 {
500 	struct buffer_head *bh;
501 	int ret;
502 
503 	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &bh);
504 	if (!ret) {
505 		mark_buffer_dirty(bh);
506 		nilfs_mdt_mark_dirty(sufile);
507 		brelse(bh);
508 	}
509 	return ret;
510 }
511 
512 /**
513  * nilfs_sufile_set_segment_usage - set usage of a segment
514  * @sufile: inode of segment usage file
515  * @segnum: segment number
516  * @nblocks: number of live blocks in the segment
517  * @modtime: modification time (option)
518  */
519 int nilfs_sufile_set_segment_usage(struct inode *sufile, __u64 segnum,
520 				   unsigned long nblocks, time64_t modtime)
521 {
522 	struct buffer_head *bh;
523 	struct nilfs_segment_usage *su;
524 	void *kaddr;
525 	int ret;
526 
527 	down_write(&NILFS_MDT(sufile)->mi_sem);
528 	ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &bh);
529 	if (ret < 0)
530 		goto out_sem;
531 
532 	kaddr = kmap_atomic(bh->b_page);
533 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, bh, kaddr);
534 	WARN_ON(nilfs_segment_usage_error(su));
535 	if (modtime)
536 		su->su_lastmod = cpu_to_le64(modtime);
537 	su->su_nblocks = cpu_to_le32(nblocks);
538 	kunmap_atomic(kaddr);
539 
540 	mark_buffer_dirty(bh);
541 	nilfs_mdt_mark_dirty(sufile);
542 	brelse(bh);
543 
544  out_sem:
545 	up_write(&NILFS_MDT(sufile)->mi_sem);
546 	return ret;
547 }
548 
549 /**
550  * nilfs_sufile_get_stat - get segment usage statistics
551  * @sufile: inode of segment usage file
552  * @stat: pointer to a structure of segment usage statistics
553  *
554  * Description: nilfs_sufile_get_stat() returns information about segment
555  * usage.
556  *
557  * Return Value: On success, 0 is returned, and segment usage information is
558  * stored in the place pointed by @stat. On error, one of the following
559  * negative error codes is returned.
560  *
561  * %-EIO - I/O error.
562  *
563  * %-ENOMEM - Insufficient amount of memory available.
564  */
565 int nilfs_sufile_get_stat(struct inode *sufile, struct nilfs_sustat *sustat)
566 {
567 	struct buffer_head *header_bh;
568 	struct nilfs_sufile_header *header;
569 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
570 	void *kaddr;
571 	int ret;
572 
573 	down_read(&NILFS_MDT(sufile)->mi_sem);
574 
575 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
576 	if (ret < 0)
577 		goto out_sem;
578 
579 	kaddr = kmap_atomic(header_bh->b_page);
580 	header = kaddr + bh_offset(header_bh);
581 	sustat->ss_nsegs = nilfs_sufile_get_nsegments(sufile);
582 	sustat->ss_ncleansegs = le64_to_cpu(header->sh_ncleansegs);
583 	sustat->ss_ndirtysegs = le64_to_cpu(header->sh_ndirtysegs);
584 	sustat->ss_ctime = nilfs->ns_ctime;
585 	sustat->ss_nongc_ctime = nilfs->ns_nongc_ctime;
586 	spin_lock(&nilfs->ns_last_segment_lock);
587 	sustat->ss_prot_seq = nilfs->ns_prot_seq;
588 	spin_unlock(&nilfs->ns_last_segment_lock);
589 	kunmap_atomic(kaddr);
590 	brelse(header_bh);
591 
592  out_sem:
593 	up_read(&NILFS_MDT(sufile)->mi_sem);
594 	return ret;
595 }
596 
597 void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum,
598 			       struct buffer_head *header_bh,
599 			       struct buffer_head *su_bh)
600 {
601 	struct nilfs_segment_usage *su;
602 	void *kaddr;
603 	int suclean;
604 
605 	kaddr = kmap_atomic(su_bh->b_page);
606 	su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
607 	if (nilfs_segment_usage_error(su)) {
608 		kunmap_atomic(kaddr);
609 		return;
610 	}
611 	suclean = nilfs_segment_usage_clean(su);
612 	nilfs_segment_usage_set_error(su);
613 	kunmap_atomic(kaddr);
614 
615 	if (suclean) {
616 		nilfs_sufile_mod_counter(header_bh, -1, 0);
617 		NILFS_SUI(sufile)->ncleansegs--;
618 	}
619 	mark_buffer_dirty(su_bh);
620 	nilfs_mdt_mark_dirty(sufile);
621 }
622 
623 /**
624  * nilfs_sufile_truncate_range - truncate range of segment array
625  * @sufile: inode of segment usage file
626  * @start: start segment number (inclusive)
627  * @end: end segment number (inclusive)
628  *
629  * Return Value: On success, 0 is returned.  On error, one of the
630  * following negative error codes is returned.
631  *
632  * %-EIO - I/O error.
633  *
634  * %-ENOMEM - Insufficient amount of memory available.
635  *
636  * %-EINVAL - Invalid number of segments specified
637  *
638  * %-EBUSY - Dirty or active segments are present in the range
639  */
640 static int nilfs_sufile_truncate_range(struct inode *sufile,
641 				       __u64 start, __u64 end)
642 {
643 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
644 	struct buffer_head *header_bh;
645 	struct buffer_head *su_bh;
646 	struct nilfs_segment_usage *su, *su2;
647 	size_t susz = NILFS_MDT(sufile)->mi_entry_size;
648 	unsigned long segusages_per_block;
649 	unsigned long nsegs, ncleaned;
650 	__u64 segnum;
651 	void *kaddr;
652 	ssize_t n, nc;
653 	int ret;
654 	int j;
655 
656 	nsegs = nilfs_sufile_get_nsegments(sufile);
657 
658 	ret = -EINVAL;
659 	if (start > end || start >= nsegs)
660 		goto out;
661 
662 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
663 	if (ret < 0)
664 		goto out;
665 
666 	segusages_per_block = nilfs_sufile_segment_usages_per_block(sufile);
667 	ncleaned = 0;
668 
669 	for (segnum = start; segnum <= end; segnum += n) {
670 		n = min_t(unsigned long,
671 			  segusages_per_block -
672 				  nilfs_sufile_get_offset(sufile, segnum),
673 			  end - segnum + 1);
674 		ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0,
675 							   &su_bh);
676 		if (ret < 0) {
677 			if (ret != -ENOENT)
678 				goto out_header;
679 			/* hole */
680 			continue;
681 		}
682 		kaddr = kmap_atomic(su_bh->b_page);
683 		su = nilfs_sufile_block_get_segment_usage(
684 			sufile, segnum, su_bh, kaddr);
685 		su2 = su;
686 		for (j = 0; j < n; j++, su = (void *)su + susz) {
687 			if ((le32_to_cpu(su->su_flags) &
688 			     ~BIT(NILFS_SEGMENT_USAGE_ERROR)) ||
689 			    nilfs_segment_is_active(nilfs, segnum + j)) {
690 				ret = -EBUSY;
691 				kunmap_atomic(kaddr);
692 				brelse(su_bh);
693 				goto out_header;
694 			}
695 		}
696 		nc = 0;
697 		for (su = su2, j = 0; j < n; j++, su = (void *)su + susz) {
698 			if (nilfs_segment_usage_error(su)) {
699 				nilfs_segment_usage_set_clean(su);
700 				nc++;
701 			}
702 		}
703 		kunmap_atomic(kaddr);
704 		if (nc > 0) {
705 			mark_buffer_dirty(su_bh);
706 			ncleaned += nc;
707 		}
708 		brelse(su_bh);
709 
710 		if (n == segusages_per_block) {
711 			/* make hole */
712 			nilfs_sufile_delete_segment_usage_block(sufile, segnum);
713 		}
714 	}
715 	ret = 0;
716 
717 out_header:
718 	if (ncleaned > 0) {
719 		NILFS_SUI(sufile)->ncleansegs += ncleaned;
720 		nilfs_sufile_mod_counter(header_bh, ncleaned, 0);
721 		nilfs_mdt_mark_dirty(sufile);
722 	}
723 	brelse(header_bh);
724 out:
725 	return ret;
726 }
727 
728 /**
729  * nilfs_sufile_resize - resize segment array
730  * @sufile: inode of segment usage file
731  * @newnsegs: new number of segments
732  *
733  * Return Value: On success, 0 is returned.  On error, one of the
734  * following negative error codes is returned.
735  *
736  * %-EIO - I/O error.
737  *
738  * %-ENOMEM - Insufficient amount of memory available.
739  *
740  * %-ENOSPC - Enough free space is not left for shrinking
741  *
742  * %-EBUSY - Dirty or active segments exist in the region to be truncated
743  */
744 int nilfs_sufile_resize(struct inode *sufile, __u64 newnsegs)
745 {
746 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
747 	struct buffer_head *header_bh;
748 	struct nilfs_sufile_header *header;
749 	struct nilfs_sufile_info *sui = NILFS_SUI(sufile);
750 	void *kaddr;
751 	unsigned long nsegs, nrsvsegs;
752 	int ret = 0;
753 
754 	down_write(&NILFS_MDT(sufile)->mi_sem);
755 
756 	nsegs = nilfs_sufile_get_nsegments(sufile);
757 	if (nsegs == newnsegs)
758 		goto out;
759 
760 	ret = -ENOSPC;
761 	nrsvsegs = nilfs_nrsvsegs(nilfs, newnsegs);
762 	if (newnsegs < nsegs && nsegs - newnsegs + nrsvsegs > sui->ncleansegs)
763 		goto out;
764 
765 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
766 	if (ret < 0)
767 		goto out;
768 
769 	if (newnsegs > nsegs) {
770 		sui->ncleansegs += newnsegs - nsegs;
771 	} else /* newnsegs < nsegs */ {
772 		ret = nilfs_sufile_truncate_range(sufile, newnsegs, nsegs - 1);
773 		if (ret < 0)
774 			goto out_header;
775 
776 		sui->ncleansegs -= nsegs - newnsegs;
777 	}
778 
779 	kaddr = kmap_atomic(header_bh->b_page);
780 	header = kaddr + bh_offset(header_bh);
781 	header->sh_ncleansegs = cpu_to_le64(sui->ncleansegs);
782 	kunmap_atomic(kaddr);
783 
784 	mark_buffer_dirty(header_bh);
785 	nilfs_mdt_mark_dirty(sufile);
786 	nilfs_set_nsegments(nilfs, newnsegs);
787 
788 out_header:
789 	brelse(header_bh);
790 out:
791 	up_write(&NILFS_MDT(sufile)->mi_sem);
792 	return ret;
793 }
794 
795 /**
796  * nilfs_sufile_get_suinfo -
797  * @sufile: inode of segment usage file
798  * @segnum: segment number to start looking
799  * @buf: array of suinfo
800  * @sisz: byte size of suinfo
801  * @nsi: size of suinfo array
802  *
803  * Description:
804  *
805  * Return Value: On success, 0 is returned and .... On error, one of the
806  * following negative error codes is returned.
807  *
808  * %-EIO - I/O error.
809  *
810  * %-ENOMEM - Insufficient amount of memory available.
811  */
812 ssize_t nilfs_sufile_get_suinfo(struct inode *sufile, __u64 segnum, void *buf,
813 				unsigned int sisz, size_t nsi)
814 {
815 	struct buffer_head *su_bh;
816 	struct nilfs_segment_usage *su;
817 	struct nilfs_suinfo *si = buf;
818 	size_t susz = NILFS_MDT(sufile)->mi_entry_size;
819 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
820 	void *kaddr;
821 	unsigned long nsegs, segusages_per_block;
822 	ssize_t n;
823 	int ret, i, j;
824 
825 	down_read(&NILFS_MDT(sufile)->mi_sem);
826 
827 	segusages_per_block = nilfs_sufile_segment_usages_per_block(sufile);
828 	nsegs = min_t(unsigned long,
829 		      nilfs_sufile_get_nsegments(sufile) - segnum,
830 		      nsi);
831 	for (i = 0; i < nsegs; i += n, segnum += n) {
832 		n = min_t(unsigned long,
833 			  segusages_per_block -
834 				  nilfs_sufile_get_offset(sufile, segnum),
835 			  nsegs - i);
836 		ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0,
837 							   &su_bh);
838 		if (ret < 0) {
839 			if (ret != -ENOENT)
840 				goto out;
841 			/* hole */
842 			memset(si, 0, sisz * n);
843 			si = (void *)si + sisz * n;
844 			continue;
845 		}
846 
847 		kaddr = kmap_atomic(su_bh->b_page);
848 		su = nilfs_sufile_block_get_segment_usage(
849 			sufile, segnum, su_bh, kaddr);
850 		for (j = 0; j < n;
851 		     j++, su = (void *)su + susz, si = (void *)si + sisz) {
852 			si->sui_lastmod = le64_to_cpu(su->su_lastmod);
853 			si->sui_nblocks = le32_to_cpu(su->su_nblocks);
854 			si->sui_flags = le32_to_cpu(su->su_flags) &
855 				~BIT(NILFS_SEGMENT_USAGE_ACTIVE);
856 			if (nilfs_segment_is_active(nilfs, segnum + j))
857 				si->sui_flags |=
858 					BIT(NILFS_SEGMENT_USAGE_ACTIVE);
859 		}
860 		kunmap_atomic(kaddr);
861 		brelse(su_bh);
862 	}
863 	ret = nsegs;
864 
865  out:
866 	up_read(&NILFS_MDT(sufile)->mi_sem);
867 	return ret;
868 }
869 
870 /**
871  * nilfs_sufile_set_suinfo - sets segment usage info
872  * @sufile: inode of segment usage file
873  * @buf: array of suinfo_update
874  * @supsz: byte size of suinfo_update
875  * @nsup: size of suinfo_update array
876  *
877  * Description: Takes an array of nilfs_suinfo_update structs and updates
878  * segment usage accordingly. Only the fields indicated by the sup_flags
879  * are updated.
880  *
881  * Return Value: On success, 0 is returned. On error, one of the
882  * following negative error codes is returned.
883  *
884  * %-EIO - I/O error.
885  *
886  * %-ENOMEM - Insufficient amount of memory available.
887  *
888  * %-EINVAL - Invalid values in input (segment number, flags or nblocks)
889  */
890 ssize_t nilfs_sufile_set_suinfo(struct inode *sufile, void *buf,
891 				unsigned int supsz, size_t nsup)
892 {
893 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
894 	struct buffer_head *header_bh, *bh;
895 	struct nilfs_suinfo_update *sup, *supend = buf + supsz * nsup;
896 	struct nilfs_segment_usage *su;
897 	void *kaddr;
898 	unsigned long blkoff, prev_blkoff;
899 	int cleansi, cleansu, dirtysi, dirtysu;
900 	long ncleaned = 0, ndirtied = 0;
901 	int ret = 0;
902 
903 	if (unlikely(nsup == 0))
904 		return ret;
905 
906 	for (sup = buf; sup < supend; sup = (void *)sup + supsz) {
907 		if (sup->sup_segnum >= nilfs->ns_nsegments
908 			|| (sup->sup_flags &
909 				(~0UL << __NR_NILFS_SUINFO_UPDATE_FIELDS))
910 			|| (nilfs_suinfo_update_nblocks(sup) &&
911 				sup->sup_sui.sui_nblocks >
912 				nilfs->ns_blocks_per_segment))
913 			return -EINVAL;
914 	}
915 
916 	down_write(&NILFS_MDT(sufile)->mi_sem);
917 
918 	ret = nilfs_sufile_get_header_block(sufile, &header_bh);
919 	if (ret < 0)
920 		goto out_sem;
921 
922 	sup = buf;
923 	blkoff = nilfs_sufile_get_blkoff(sufile, sup->sup_segnum);
924 	ret = nilfs_mdt_get_block(sufile, blkoff, 1, NULL, &bh);
925 	if (ret < 0)
926 		goto out_header;
927 
928 	for (;;) {
929 		kaddr = kmap_atomic(bh->b_page);
930 		su = nilfs_sufile_block_get_segment_usage(
931 			sufile, sup->sup_segnum, bh, kaddr);
932 
933 		if (nilfs_suinfo_update_lastmod(sup))
934 			su->su_lastmod = cpu_to_le64(sup->sup_sui.sui_lastmod);
935 
936 		if (nilfs_suinfo_update_nblocks(sup))
937 			su->su_nblocks = cpu_to_le32(sup->sup_sui.sui_nblocks);
938 
939 		if (nilfs_suinfo_update_flags(sup)) {
940 			/*
941 			 * Active flag is a virtual flag projected by running
942 			 * nilfs kernel code - drop it not to write it to
943 			 * disk.
944 			 */
945 			sup->sup_sui.sui_flags &=
946 					~BIT(NILFS_SEGMENT_USAGE_ACTIVE);
947 
948 			cleansi = nilfs_suinfo_clean(&sup->sup_sui);
949 			cleansu = nilfs_segment_usage_clean(su);
950 			dirtysi = nilfs_suinfo_dirty(&sup->sup_sui);
951 			dirtysu = nilfs_segment_usage_dirty(su);
952 
953 			if (cleansi && !cleansu)
954 				++ncleaned;
955 			else if (!cleansi && cleansu)
956 				--ncleaned;
957 
958 			if (dirtysi && !dirtysu)
959 				++ndirtied;
960 			else if (!dirtysi && dirtysu)
961 				--ndirtied;
962 
963 			su->su_flags = cpu_to_le32(sup->sup_sui.sui_flags);
964 		}
965 
966 		kunmap_atomic(kaddr);
967 
968 		sup = (void *)sup + supsz;
969 		if (sup >= supend)
970 			break;
971 
972 		prev_blkoff = blkoff;
973 		blkoff = nilfs_sufile_get_blkoff(sufile, sup->sup_segnum);
974 		if (blkoff == prev_blkoff)
975 			continue;
976 
977 		/* get different block */
978 		mark_buffer_dirty(bh);
979 		put_bh(bh);
980 		ret = nilfs_mdt_get_block(sufile, blkoff, 1, NULL, &bh);
981 		if (unlikely(ret < 0))
982 			goto out_mark;
983 	}
984 	mark_buffer_dirty(bh);
985 	put_bh(bh);
986 
987  out_mark:
988 	if (ncleaned || ndirtied) {
989 		nilfs_sufile_mod_counter(header_bh, (u64)ncleaned,
990 				(u64)ndirtied);
991 		NILFS_SUI(sufile)->ncleansegs += ncleaned;
992 	}
993 	nilfs_mdt_mark_dirty(sufile);
994  out_header:
995 	put_bh(header_bh);
996  out_sem:
997 	up_write(&NILFS_MDT(sufile)->mi_sem);
998 	return ret;
999 }
1000 
1001 /**
1002  * nilfs_sufile_trim_fs() - trim ioctl handle function
1003  * @sufile: inode of segment usage file
1004  * @range: fstrim_range structure
1005  *
1006  * start:	First Byte to trim
1007  * len:		number of Bytes to trim from start
1008  * minlen:	minimum extent length in Bytes
1009  *
1010  * Decription: nilfs_sufile_trim_fs goes through all segments containing bytes
1011  * from start to start+len. start is rounded up to the next block boundary
1012  * and start+len is rounded down. For each clean segment blkdev_issue_discard
1013  * function is invoked.
1014  *
1015  * Return Value: On success, 0 is returned or negative error code, otherwise.
1016  */
1017 int nilfs_sufile_trim_fs(struct inode *sufile, struct fstrim_range *range)
1018 {
1019 	struct the_nilfs *nilfs = sufile->i_sb->s_fs_info;
1020 	struct buffer_head *su_bh;
1021 	struct nilfs_segment_usage *su;
1022 	void *kaddr;
1023 	size_t n, i, susz = NILFS_MDT(sufile)->mi_entry_size;
1024 	sector_t seg_start, seg_end, start_block, end_block;
1025 	sector_t start = 0, nblocks = 0;
1026 	u64 segnum, segnum_end, minlen, len, max_blocks, ndiscarded = 0;
1027 	int ret = 0;
1028 	unsigned int sects_per_block;
1029 
1030 	sects_per_block = (1 << nilfs->ns_blocksize_bits) /
1031 			bdev_logical_block_size(nilfs->ns_bdev);
1032 	len = range->len >> nilfs->ns_blocksize_bits;
1033 	minlen = range->minlen >> nilfs->ns_blocksize_bits;
1034 	max_blocks = ((u64)nilfs->ns_nsegments * nilfs->ns_blocks_per_segment);
1035 
1036 	if (!len || range->start >= max_blocks << nilfs->ns_blocksize_bits)
1037 		return -EINVAL;
1038 
1039 	start_block = (range->start + nilfs->ns_blocksize - 1) >>
1040 			nilfs->ns_blocksize_bits;
1041 
1042 	/*
1043 	 * range->len can be very large (actually, it is set to
1044 	 * ULLONG_MAX by default) - truncate upper end of the range
1045 	 * carefully so as not to overflow.
1046 	 */
1047 	if (max_blocks - start_block < len)
1048 		end_block = max_blocks - 1;
1049 	else
1050 		end_block = start_block + len - 1;
1051 
1052 	segnum = nilfs_get_segnum_of_block(nilfs, start_block);
1053 	segnum_end = nilfs_get_segnum_of_block(nilfs, end_block);
1054 
1055 	down_read(&NILFS_MDT(sufile)->mi_sem);
1056 
1057 	while (segnum <= segnum_end) {
1058 		n = nilfs_sufile_segment_usages_in_block(sufile, segnum,
1059 				segnum_end);
1060 
1061 		ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0,
1062 							   &su_bh);
1063 		if (ret < 0) {
1064 			if (ret != -ENOENT)
1065 				goto out_sem;
1066 			/* hole */
1067 			segnum += n;
1068 			continue;
1069 		}
1070 
1071 		kaddr = kmap_atomic(su_bh->b_page);
1072 		su = nilfs_sufile_block_get_segment_usage(sufile, segnum,
1073 				su_bh, kaddr);
1074 		for (i = 0; i < n; ++i, ++segnum, su = (void *)su + susz) {
1075 			if (!nilfs_segment_usage_clean(su))
1076 				continue;
1077 
1078 			nilfs_get_segment_range(nilfs, segnum, &seg_start,
1079 						&seg_end);
1080 
1081 			if (!nblocks) {
1082 				/* start new extent */
1083 				start = seg_start;
1084 				nblocks = seg_end - seg_start + 1;
1085 				continue;
1086 			}
1087 
1088 			if (start + nblocks == seg_start) {
1089 				/* add to previous extent */
1090 				nblocks += seg_end - seg_start + 1;
1091 				continue;
1092 			}
1093 
1094 			/* discard previous extent */
1095 			if (start < start_block) {
1096 				nblocks -= start_block - start;
1097 				start = start_block;
1098 			}
1099 
1100 			if (nblocks >= minlen) {
1101 				kunmap_atomic(kaddr);
1102 
1103 				ret = blkdev_issue_discard(nilfs->ns_bdev,
1104 						start * sects_per_block,
1105 						nblocks * sects_per_block,
1106 						GFP_NOFS, 0);
1107 				if (ret < 0) {
1108 					put_bh(su_bh);
1109 					goto out_sem;
1110 				}
1111 
1112 				ndiscarded += nblocks;
1113 				kaddr = kmap_atomic(su_bh->b_page);
1114 				su = nilfs_sufile_block_get_segment_usage(
1115 					sufile, segnum, su_bh, kaddr);
1116 			}
1117 
1118 			/* start new extent */
1119 			start = seg_start;
1120 			nblocks = seg_end - seg_start + 1;
1121 		}
1122 		kunmap_atomic(kaddr);
1123 		put_bh(su_bh);
1124 	}
1125 
1126 
1127 	if (nblocks) {
1128 		/* discard last extent */
1129 		if (start < start_block) {
1130 			nblocks -= start_block - start;
1131 			start = start_block;
1132 		}
1133 		if (start + nblocks > end_block + 1)
1134 			nblocks = end_block - start + 1;
1135 
1136 		if (nblocks >= minlen) {
1137 			ret = blkdev_issue_discard(nilfs->ns_bdev,
1138 					start * sects_per_block,
1139 					nblocks * sects_per_block,
1140 					GFP_NOFS, 0);
1141 			if (!ret)
1142 				ndiscarded += nblocks;
1143 		}
1144 	}
1145 
1146 out_sem:
1147 	up_read(&NILFS_MDT(sufile)->mi_sem);
1148 
1149 	range->len = ndiscarded << nilfs->ns_blocksize_bits;
1150 	return ret;
1151 }
1152 
1153 /**
1154  * nilfs_sufile_read - read or get sufile inode
1155  * @sb: super block instance
1156  * @susize: size of a segment usage entry
1157  * @raw_inode: on-disk sufile inode
1158  * @inodep: buffer to store the inode
1159  */
1160 int nilfs_sufile_read(struct super_block *sb, size_t susize,
1161 		      struct nilfs_inode *raw_inode, struct inode **inodep)
1162 {
1163 	struct inode *sufile;
1164 	struct nilfs_sufile_info *sui;
1165 	struct buffer_head *header_bh;
1166 	struct nilfs_sufile_header *header;
1167 	void *kaddr;
1168 	int err;
1169 
1170 	if (susize > sb->s_blocksize) {
1171 		nilfs_msg(sb, KERN_ERR,
1172 			  "too large segment usage size: %zu bytes", susize);
1173 		return -EINVAL;
1174 	} else if (susize < NILFS_MIN_SEGMENT_USAGE_SIZE) {
1175 		nilfs_msg(sb, KERN_ERR,
1176 			  "too small segment usage size: %zu bytes", susize);
1177 		return -EINVAL;
1178 	}
1179 
1180 	sufile = nilfs_iget_locked(sb, NULL, NILFS_SUFILE_INO);
1181 	if (unlikely(!sufile))
1182 		return -ENOMEM;
1183 	if (!(sufile->i_state & I_NEW))
1184 		goto out;
1185 
1186 	err = nilfs_mdt_init(sufile, NILFS_MDT_GFP, sizeof(*sui));
1187 	if (err)
1188 		goto failed;
1189 
1190 	nilfs_mdt_set_entry_size(sufile, susize,
1191 				 sizeof(struct nilfs_sufile_header));
1192 
1193 	err = nilfs_read_inode_common(sufile, raw_inode);
1194 	if (err)
1195 		goto failed;
1196 
1197 	err = nilfs_sufile_get_header_block(sufile, &header_bh);
1198 	if (err)
1199 		goto failed;
1200 
1201 	sui = NILFS_SUI(sufile);
1202 	kaddr = kmap_atomic(header_bh->b_page);
1203 	header = kaddr + bh_offset(header_bh);
1204 	sui->ncleansegs = le64_to_cpu(header->sh_ncleansegs);
1205 	kunmap_atomic(kaddr);
1206 	brelse(header_bh);
1207 
1208 	sui->allocmax = nilfs_sufile_get_nsegments(sufile) - 1;
1209 	sui->allocmin = 0;
1210 
1211 	unlock_new_inode(sufile);
1212  out:
1213 	*inodep = sufile;
1214 	return 0;
1215  failed:
1216 	iget_failed(sufile);
1217 	return err;
1218 }
1219