xref: /openbmc/linux/fs/jbd2/recovery.c (revision aded0023)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * linux/fs/jbd2/recovery.c
4  *
5  * Written by Stephen C. Tweedie <sct@redhat.com>, 1999
6  *
7  * Copyright 1999-2000 Red Hat Software --- All Rights Reserved
8  *
9  * Journal recovery routines for the generic filesystem journaling code;
10  * part of the ext2fs journaling system.
11  */
12 
13 #ifndef __KERNEL__
14 #include "jfs_user.h"
15 #else
16 #include <linux/time.h>
17 #include <linux/fs.h>
18 #include <linux/jbd2.h>
19 #include <linux/errno.h>
20 #include <linux/crc32.h>
21 #include <linux/blkdev.h>
22 #endif
23 
24 /*
25  * Maintain information about the progress of the recovery job, so that
26  * the different passes can carry information between them.
27  */
28 struct recovery_info
29 {
30 	tid_t		start_transaction;
31 	tid_t		end_transaction;
32 	unsigned long	head_block;
33 
34 	int		nr_replays;
35 	int		nr_revokes;
36 	int		nr_revoke_hits;
37 };
38 
39 static int do_one_pass(journal_t *journal,
40 				struct recovery_info *info, enum passtype pass);
41 static int scan_revoke_records(journal_t *, struct buffer_head *,
42 				tid_t, struct recovery_info *);
43 
44 #ifdef __KERNEL__
45 
46 /* Release readahead buffers after use */
47 static void journal_brelse_array(struct buffer_head *b[], int n)
48 {
49 	while (--n >= 0)
50 		brelse (b[n]);
51 }
52 
53 
54 /*
55  * When reading from the journal, we are going through the block device
56  * layer directly and so there is no readahead being done for us.  We
57  * need to implement any readahead ourselves if we want it to happen at
58  * all.  Recovery is basically one long sequential read, so make sure we
59  * do the IO in reasonably large chunks.
60  *
61  * This is not so critical that we need to be enormously clever about
62  * the readahead size, though.  128K is a purely arbitrary, good-enough
63  * fixed value.
64  */
65 
66 #define MAXBUF 8
67 static int do_readahead(journal_t *journal, unsigned int start)
68 {
69 	int err;
70 	unsigned int max, nbufs, next;
71 	unsigned long long blocknr;
72 	struct buffer_head *bh;
73 
74 	struct buffer_head * bufs[MAXBUF];
75 
76 	/* Do up to 128K of readahead */
77 	max = start + (128 * 1024 / journal->j_blocksize);
78 	if (max > journal->j_total_len)
79 		max = journal->j_total_len;
80 
81 	/* Do the readahead itself.  We'll submit MAXBUF buffer_heads at
82 	 * a time to the block device IO layer. */
83 
84 	nbufs = 0;
85 
86 	for (next = start; next < max; next++) {
87 		err = jbd2_journal_bmap(journal, next, &blocknr);
88 
89 		if (err) {
90 			printk(KERN_ERR "JBD2: bad block at offset %u\n",
91 				next);
92 			goto failed;
93 		}
94 
95 		bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
96 		if (!bh) {
97 			err = -ENOMEM;
98 			goto failed;
99 		}
100 
101 		if (!buffer_uptodate(bh) && !buffer_locked(bh)) {
102 			bufs[nbufs++] = bh;
103 			if (nbufs == MAXBUF) {
104 				bh_readahead_batch(nbufs, bufs, 0);
105 				journal_brelse_array(bufs, nbufs);
106 				nbufs = 0;
107 			}
108 		} else
109 			brelse(bh);
110 	}
111 
112 	if (nbufs)
113 		bh_readahead_batch(nbufs, bufs, 0);
114 	err = 0;
115 
116 failed:
117 	if (nbufs)
118 		journal_brelse_array(bufs, nbufs);
119 	return err;
120 }
121 
122 #endif /* __KERNEL__ */
123 
124 
125 /*
126  * Read a block from the journal
127  */
128 
129 static int jread(struct buffer_head **bhp, journal_t *journal,
130 		 unsigned int offset)
131 {
132 	int err;
133 	unsigned long long blocknr;
134 	struct buffer_head *bh;
135 
136 	*bhp = NULL;
137 
138 	if (offset >= journal->j_total_len) {
139 		printk(KERN_ERR "JBD2: corrupted journal superblock\n");
140 		return -EFSCORRUPTED;
141 	}
142 
143 	err = jbd2_journal_bmap(journal, offset, &blocknr);
144 
145 	if (err) {
146 		printk(KERN_ERR "JBD2: bad block at offset %u\n",
147 			offset);
148 		return err;
149 	}
150 
151 	bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
152 	if (!bh)
153 		return -ENOMEM;
154 
155 	if (!buffer_uptodate(bh)) {
156 		/*
157 		 * If this is a brand new buffer, start readahead.
158 		 * Otherwise, we assume we are already reading it.
159 		 */
160 		bool need_readahead = !buffer_req(bh);
161 
162 		bh_read_nowait(bh, 0);
163 		if (need_readahead)
164 			do_readahead(journal, offset);
165 		wait_on_buffer(bh);
166 	}
167 
168 	if (!buffer_uptodate(bh)) {
169 		printk(KERN_ERR "JBD2: Failed to read block at offset %u\n",
170 			offset);
171 		brelse(bh);
172 		return -EIO;
173 	}
174 
175 	*bhp = bh;
176 	return 0;
177 }
178 
179 static int jbd2_descriptor_block_csum_verify(journal_t *j, void *buf)
180 {
181 	struct jbd2_journal_block_tail *tail;
182 	__be32 provided;
183 	__u32 calculated;
184 
185 	if (!jbd2_journal_has_csum_v2or3(j))
186 		return 1;
187 
188 	tail = (struct jbd2_journal_block_tail *)((char *)buf +
189 		j->j_blocksize - sizeof(struct jbd2_journal_block_tail));
190 	provided = tail->t_checksum;
191 	tail->t_checksum = 0;
192 	calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize);
193 	tail->t_checksum = provided;
194 
195 	return provided == cpu_to_be32(calculated);
196 }
197 
198 /*
199  * Count the number of in-use tags in a journal descriptor block.
200  */
201 
202 static int count_tags(journal_t *journal, struct buffer_head *bh)
203 {
204 	char *			tagp;
205 	journal_block_tag_t	tag;
206 	int			nr = 0, size = journal->j_blocksize;
207 	int			tag_bytes = journal_tag_bytes(journal);
208 
209 	if (jbd2_journal_has_csum_v2or3(journal))
210 		size -= sizeof(struct jbd2_journal_block_tail);
211 
212 	tagp = &bh->b_data[sizeof(journal_header_t)];
213 
214 	while ((tagp - bh->b_data + tag_bytes) <= size) {
215 		memcpy(&tag, tagp, sizeof(tag));
216 
217 		nr++;
218 		tagp += tag_bytes;
219 		if (!(tag.t_flags & cpu_to_be16(JBD2_FLAG_SAME_UUID)))
220 			tagp += 16;
221 
222 		if (tag.t_flags & cpu_to_be16(JBD2_FLAG_LAST_TAG))
223 			break;
224 	}
225 
226 	return nr;
227 }
228 
229 
230 /* Make sure we wrap around the log correctly! */
231 #define wrap(journal, var)						\
232 do {									\
233 	unsigned long _wrap_last =					\
234 		jbd2_has_feature_fast_commit(journal) ?			\
235 			(journal)->j_fc_last : (journal)->j_last;	\
236 									\
237 	if (var >= _wrap_last)						\
238 		var -= (_wrap_last - (journal)->j_first);		\
239 } while (0)
240 
241 static int fc_do_one_pass(journal_t *journal,
242 			  struct recovery_info *info, enum passtype pass)
243 {
244 	unsigned int expected_commit_id = info->end_transaction;
245 	unsigned long next_fc_block;
246 	struct buffer_head *bh;
247 	int err = 0;
248 
249 	next_fc_block = journal->j_fc_first;
250 	if (!journal->j_fc_replay_callback)
251 		return 0;
252 
253 	while (next_fc_block <= journal->j_fc_last) {
254 		jbd2_debug(3, "Fast commit replay: next block %ld\n",
255 			  next_fc_block);
256 		err = jread(&bh, journal, next_fc_block);
257 		if (err) {
258 			jbd2_debug(3, "Fast commit replay: read error\n");
259 			break;
260 		}
261 
262 		err = journal->j_fc_replay_callback(journal, bh, pass,
263 					next_fc_block - journal->j_fc_first,
264 					expected_commit_id);
265 		brelse(bh);
266 		next_fc_block++;
267 		if (err < 0 || err == JBD2_FC_REPLAY_STOP)
268 			break;
269 		err = 0;
270 	}
271 
272 	if (err)
273 		jbd2_debug(3, "Fast commit replay failed, err = %d\n", err);
274 
275 	return err;
276 }
277 
278 /**
279  * jbd2_journal_recover - recovers a on-disk journal
280  * @journal: the journal to recover
281  *
282  * The primary function for recovering the log contents when mounting a
283  * journaled device.
284  *
285  * Recovery is done in three passes.  In the first pass, we look for the
286  * end of the log.  In the second, we assemble the list of revoke
287  * blocks.  In the third and final pass, we replay any un-revoked blocks
288  * in the log.
289  */
290 int jbd2_journal_recover(journal_t *journal)
291 {
292 	int			err, err2;
293 	journal_superblock_t *	sb;
294 
295 	struct recovery_info	info;
296 
297 	memset(&info, 0, sizeof(info));
298 	sb = journal->j_superblock;
299 
300 	/*
301 	 * The journal superblock's s_start field (the current log head)
302 	 * is always zero if, and only if, the journal was cleanly
303 	 * unmounted.
304 	 */
305 	if (!sb->s_start) {
306 		jbd2_debug(1, "No recovery required, last transaction %d, head block %u\n",
307 			  be32_to_cpu(sb->s_sequence), be32_to_cpu(sb->s_head));
308 		journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1;
309 		journal->j_head = be32_to_cpu(sb->s_head);
310 		return 0;
311 	}
312 
313 	err = do_one_pass(journal, &info, PASS_SCAN);
314 	if (!err)
315 		err = do_one_pass(journal, &info, PASS_REVOKE);
316 	if (!err)
317 		err = do_one_pass(journal, &info, PASS_REPLAY);
318 
319 	jbd2_debug(1, "JBD2: recovery, exit status %d, "
320 		  "recovered transactions %u to %u\n",
321 		  err, info.start_transaction, info.end_transaction);
322 	jbd2_debug(1, "JBD2: Replayed %d and revoked %d/%d blocks\n",
323 		  info.nr_replays, info.nr_revoke_hits, info.nr_revokes);
324 
325 	/* Restart the log at the next transaction ID, thus invalidating
326 	 * any existing commit records in the log. */
327 	journal->j_transaction_sequence = ++info.end_transaction;
328 	journal->j_head = info.head_block;
329 	jbd2_debug(1, "JBD2: last transaction %d, head block %lu\n",
330 		  journal->j_transaction_sequence, journal->j_head);
331 
332 	jbd2_journal_clear_revoke(journal);
333 	err2 = sync_blockdev(journal->j_fs_dev);
334 	if (!err)
335 		err = err2;
336 	/* Make sure all replayed data is on permanent storage */
337 	if (journal->j_flags & JBD2_BARRIER) {
338 		err2 = blkdev_issue_flush(journal->j_fs_dev);
339 		if (!err)
340 			err = err2;
341 	}
342 	return err;
343 }
344 
345 /**
346  * jbd2_journal_skip_recovery - Start journal and wipe exiting records
347  * @journal: journal to startup
348  *
349  * Locate any valid recovery information from the journal and set up the
350  * journal structures in memory to ignore it (presumably because the
351  * caller has evidence that it is out of date).
352  * This function doesn't appear to be exported..
353  *
354  * We perform one pass over the journal to allow us to tell the user how
355  * much recovery information is being erased, and to let us initialise
356  * the journal transaction sequence numbers to the next unused ID.
357  */
358 int jbd2_journal_skip_recovery(journal_t *journal)
359 {
360 	int			err;
361 
362 	struct recovery_info	info;
363 
364 	memset (&info, 0, sizeof(info));
365 
366 	err = do_one_pass(journal, &info, PASS_SCAN);
367 
368 	if (err) {
369 		printk(KERN_ERR "JBD2: error %d scanning journal\n", err);
370 		++journal->j_transaction_sequence;
371 		journal->j_head = journal->j_first;
372 	} else {
373 #ifdef CONFIG_JBD2_DEBUG
374 		int dropped = info.end_transaction -
375 			be32_to_cpu(journal->j_superblock->s_sequence);
376 		jbd2_debug(1,
377 			  "JBD2: ignoring %d transaction%s from the journal.\n",
378 			  dropped, (dropped == 1) ? "" : "s");
379 #endif
380 		journal->j_transaction_sequence = ++info.end_transaction;
381 		journal->j_head = info.head_block;
382 	}
383 
384 	journal->j_tail = 0;
385 	return err;
386 }
387 
388 static inline unsigned long long read_tag_block(journal_t *journal,
389 						journal_block_tag_t *tag)
390 {
391 	unsigned long long block = be32_to_cpu(tag->t_blocknr);
392 	if (jbd2_has_feature_64bit(journal))
393 		block |= (u64)be32_to_cpu(tag->t_blocknr_high) << 32;
394 	return block;
395 }
396 
397 /*
398  * calc_chksums calculates the checksums for the blocks described in the
399  * descriptor block.
400  */
401 static int calc_chksums(journal_t *journal, struct buffer_head *bh,
402 			unsigned long *next_log_block, __u32 *crc32_sum)
403 {
404 	int i, num_blks, err;
405 	unsigned long io_block;
406 	struct buffer_head *obh;
407 
408 	num_blks = count_tags(journal, bh);
409 	/* Calculate checksum of the descriptor block. */
410 	*crc32_sum = crc32_be(*crc32_sum, (void *)bh->b_data, bh->b_size);
411 
412 	for (i = 0; i < num_blks; i++) {
413 		io_block = (*next_log_block)++;
414 		wrap(journal, *next_log_block);
415 		err = jread(&obh, journal, io_block);
416 		if (err) {
417 			printk(KERN_ERR "JBD2: IO error %d recovering block "
418 				"%lu in log\n", err, io_block);
419 			return 1;
420 		} else {
421 			*crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data,
422 				     obh->b_size);
423 		}
424 		put_bh(obh);
425 	}
426 	return 0;
427 }
428 
429 static int jbd2_commit_block_csum_verify(journal_t *j, void *buf)
430 {
431 	struct commit_header *h;
432 	__be32 provided;
433 	__u32 calculated;
434 
435 	if (!jbd2_journal_has_csum_v2or3(j))
436 		return 1;
437 
438 	h = buf;
439 	provided = h->h_chksum[0];
440 	h->h_chksum[0] = 0;
441 	calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize);
442 	h->h_chksum[0] = provided;
443 
444 	return provided == cpu_to_be32(calculated);
445 }
446 
447 static int jbd2_block_tag_csum_verify(journal_t *j, journal_block_tag_t *tag,
448 				      journal_block_tag3_t *tag3,
449 				      void *buf, __u32 sequence)
450 {
451 	__u32 csum32;
452 	__be32 seq;
453 
454 	if (!jbd2_journal_has_csum_v2or3(j))
455 		return 1;
456 
457 	seq = cpu_to_be32(sequence);
458 	csum32 = jbd2_chksum(j, j->j_csum_seed, (__u8 *)&seq, sizeof(seq));
459 	csum32 = jbd2_chksum(j, csum32, buf, j->j_blocksize);
460 
461 	if (jbd2_has_feature_csum3(j))
462 		return tag3->t_checksum == cpu_to_be32(csum32);
463 	else
464 		return tag->t_checksum == cpu_to_be16(csum32);
465 }
466 
467 static int do_one_pass(journal_t *journal,
468 			struct recovery_info *info, enum passtype pass)
469 {
470 	unsigned int		first_commit_ID, next_commit_ID;
471 	unsigned long		next_log_block, head_block;
472 	int			err, success = 0;
473 	journal_superblock_t *	sb;
474 	journal_header_t *	tmp;
475 	struct buffer_head *	bh;
476 	unsigned int		sequence;
477 	int			blocktype;
478 	int			tag_bytes = journal_tag_bytes(journal);
479 	__u32			crc32_sum = ~0; /* Transactional Checksums */
480 	int			descr_csum_size = 0;
481 	int			block_error = 0;
482 	bool			need_check_commit_time = false;
483 	__u64			last_trans_commit_time = 0, commit_time;
484 
485 	/*
486 	 * First thing is to establish what we expect to find in the log
487 	 * (in terms of transaction IDs), and where (in terms of log
488 	 * block offsets): query the superblock.
489 	 */
490 
491 	sb = journal->j_superblock;
492 	next_commit_ID = be32_to_cpu(sb->s_sequence);
493 	next_log_block = be32_to_cpu(sb->s_start);
494 	head_block = next_log_block;
495 
496 	first_commit_ID = next_commit_ID;
497 	if (pass == PASS_SCAN)
498 		info->start_transaction = first_commit_ID;
499 
500 	jbd2_debug(1, "Starting recovery pass %d\n", pass);
501 
502 	/*
503 	 * Now we walk through the log, transaction by transaction,
504 	 * making sure that each transaction has a commit block in the
505 	 * expected place.  Each complete transaction gets replayed back
506 	 * into the main filesystem.
507 	 */
508 
509 	while (1) {
510 		int			flags;
511 		char *			tagp;
512 		journal_block_tag_t	tag;
513 		struct buffer_head *	obh;
514 		struct buffer_head *	nbh;
515 
516 		cond_resched();
517 
518 		/* If we already know where to stop the log traversal,
519 		 * check right now that we haven't gone past the end of
520 		 * the log. */
521 
522 		if (pass != PASS_SCAN)
523 			if (tid_geq(next_commit_ID, info->end_transaction))
524 				break;
525 
526 		jbd2_debug(2, "Scanning for sequence ID %u at %lu/%lu\n",
527 			  next_commit_ID, next_log_block,
528 			  jbd2_has_feature_fast_commit(journal) ?
529 			  journal->j_fc_last : journal->j_last);
530 
531 		/* Skip over each chunk of the transaction looking
532 		 * either the next descriptor block or the final commit
533 		 * record. */
534 
535 		jbd2_debug(3, "JBD2: checking block %ld\n", next_log_block);
536 		err = jread(&bh, journal, next_log_block);
537 		if (err)
538 			goto failed;
539 
540 		next_log_block++;
541 		wrap(journal, next_log_block);
542 
543 		/* What kind of buffer is it?
544 		 *
545 		 * If it is a descriptor block, check that it has the
546 		 * expected sequence number.  Otherwise, we're all done
547 		 * here. */
548 
549 		tmp = (journal_header_t *)bh->b_data;
550 
551 		if (tmp->h_magic != cpu_to_be32(JBD2_MAGIC_NUMBER)) {
552 			brelse(bh);
553 			break;
554 		}
555 
556 		blocktype = be32_to_cpu(tmp->h_blocktype);
557 		sequence = be32_to_cpu(tmp->h_sequence);
558 		jbd2_debug(3, "Found magic %d, sequence %d\n",
559 			  blocktype, sequence);
560 
561 		if (sequence != next_commit_ID) {
562 			brelse(bh);
563 			break;
564 		}
565 
566 		/* OK, we have a valid descriptor block which matches
567 		 * all of the sequence number checks.  What are we going
568 		 * to do with it?  That depends on the pass... */
569 
570 		switch(blocktype) {
571 		case JBD2_DESCRIPTOR_BLOCK:
572 			/* Verify checksum first */
573 			if (jbd2_journal_has_csum_v2or3(journal))
574 				descr_csum_size =
575 					sizeof(struct jbd2_journal_block_tail);
576 			if (descr_csum_size > 0 &&
577 			    !jbd2_descriptor_block_csum_verify(journal,
578 							       bh->b_data)) {
579 				/*
580 				 * PASS_SCAN can see stale blocks due to lazy
581 				 * journal init. Don't error out on those yet.
582 				 */
583 				if (pass != PASS_SCAN) {
584 					pr_err("JBD2: Invalid checksum recovering block %lu in log\n",
585 					       next_log_block);
586 					err = -EFSBADCRC;
587 					brelse(bh);
588 					goto failed;
589 				}
590 				need_check_commit_time = true;
591 				jbd2_debug(1,
592 					"invalid descriptor block found in %lu\n",
593 					next_log_block);
594 			}
595 
596 			/* If it is a valid descriptor block, replay it
597 			 * in pass REPLAY; if journal_checksums enabled, then
598 			 * calculate checksums in PASS_SCAN, otherwise,
599 			 * just skip over the blocks it describes. */
600 			if (pass != PASS_REPLAY) {
601 				if (pass == PASS_SCAN &&
602 				    jbd2_has_feature_checksum(journal) &&
603 				    !need_check_commit_time &&
604 				    !info->end_transaction) {
605 					if (calc_chksums(journal, bh,
606 							&next_log_block,
607 							&crc32_sum)) {
608 						put_bh(bh);
609 						break;
610 					}
611 					put_bh(bh);
612 					continue;
613 				}
614 				next_log_block += count_tags(journal, bh);
615 				wrap(journal, next_log_block);
616 				put_bh(bh);
617 				continue;
618 			}
619 
620 			/* A descriptor block: we can now write all of
621 			 * the data blocks.  Yay, useful work is finally
622 			 * getting done here! */
623 
624 			tagp = &bh->b_data[sizeof(journal_header_t)];
625 			while ((tagp - bh->b_data + tag_bytes)
626 			       <= journal->j_blocksize - descr_csum_size) {
627 				unsigned long io_block;
628 
629 				memcpy(&tag, tagp, sizeof(tag));
630 				flags = be16_to_cpu(tag.t_flags);
631 
632 				io_block = next_log_block++;
633 				wrap(journal, next_log_block);
634 				err = jread(&obh, journal, io_block);
635 				if (err) {
636 					/* Recover what we can, but
637 					 * report failure at the end. */
638 					success = err;
639 					printk(KERN_ERR
640 						"JBD2: IO error %d recovering "
641 						"block %ld in log\n",
642 						err, io_block);
643 				} else {
644 					unsigned long long blocknr;
645 
646 					J_ASSERT(obh != NULL);
647 					blocknr = read_tag_block(journal,
648 								 &tag);
649 
650 					/* If the block has been
651 					 * revoked, then we're all done
652 					 * here. */
653 					if (jbd2_journal_test_revoke
654 					    (journal, blocknr,
655 					     next_commit_ID)) {
656 						brelse(obh);
657 						++info->nr_revoke_hits;
658 						goto skip_write;
659 					}
660 
661 					/* Look for block corruption */
662 					if (!jbd2_block_tag_csum_verify(
663 			journal, &tag, (journal_block_tag3_t *)tagp,
664 			obh->b_data, be32_to_cpu(tmp->h_sequence))) {
665 						brelse(obh);
666 						success = -EFSBADCRC;
667 						printk(KERN_ERR "JBD2: Invalid "
668 						       "checksum recovering "
669 						       "data block %llu in "
670 						       "log\n", blocknr);
671 						block_error = 1;
672 						goto skip_write;
673 					}
674 
675 					/* Find a buffer for the new
676 					 * data being restored */
677 					nbh = __getblk(journal->j_fs_dev,
678 							blocknr,
679 							journal->j_blocksize);
680 					if (nbh == NULL) {
681 						printk(KERN_ERR
682 						       "JBD2: Out of memory "
683 						       "during recovery.\n");
684 						err = -ENOMEM;
685 						brelse(bh);
686 						brelse(obh);
687 						goto failed;
688 					}
689 
690 					lock_buffer(nbh);
691 					memcpy(nbh->b_data, obh->b_data,
692 							journal->j_blocksize);
693 					if (flags & JBD2_FLAG_ESCAPE) {
694 						*((__be32 *)nbh->b_data) =
695 						cpu_to_be32(JBD2_MAGIC_NUMBER);
696 					}
697 
698 					BUFFER_TRACE(nbh, "marking dirty");
699 					set_buffer_uptodate(nbh);
700 					mark_buffer_dirty(nbh);
701 					BUFFER_TRACE(nbh, "marking uptodate");
702 					++info->nr_replays;
703 					unlock_buffer(nbh);
704 					brelse(obh);
705 					brelse(nbh);
706 				}
707 
708 			skip_write:
709 				tagp += tag_bytes;
710 				if (!(flags & JBD2_FLAG_SAME_UUID))
711 					tagp += 16;
712 
713 				if (flags & JBD2_FLAG_LAST_TAG)
714 					break;
715 			}
716 
717 			brelse(bh);
718 			continue;
719 
720 		case JBD2_COMMIT_BLOCK:
721 			/*     How to differentiate between interrupted commit
722 			 *               and journal corruption ?
723 			 *
724 			 * {nth transaction}
725 			 *        Checksum Verification Failed
726 			 *			 |
727 			 *		 ____________________
728 			 *		|		     |
729 			 * 	async_commit             sync_commit
730 			 *     		|                    |
731 			 *		| GO TO NEXT    "Journal Corruption"
732 			 *		| TRANSACTION
733 			 *		|
734 			 * {(n+1)th transanction}
735 			 *		|
736 			 * 	 _______|______________
737 			 * 	|	 	      |
738 			 * Commit block found	Commit block not found
739 			 *      |		      |
740 			 * "Journal Corruption"       |
741 			 *		 _____________|_________
742 			 *     		|	           	|
743 			 *	nth trans corrupt	OR   nth trans
744 			 *	and (n+1)th interrupted     interrupted
745 			 *	before commit block
746 			 *      could reach the disk.
747 			 *	(Cannot find the difference in above
748 			 *	 mentioned conditions. Hence assume
749 			 *	 "Interrupted Commit".)
750 			 */
751 			commit_time = be64_to_cpu(
752 				((struct commit_header *)bh->b_data)->h_commit_sec);
753 			/*
754 			 * If need_check_commit_time is set, it means we are in
755 			 * PASS_SCAN and csum verify failed before. If
756 			 * commit_time is increasing, it's the same journal,
757 			 * otherwise it is stale journal block, just end this
758 			 * recovery.
759 			 */
760 			if (need_check_commit_time) {
761 				if (commit_time >= last_trans_commit_time) {
762 					pr_err("JBD2: Invalid checksum found in transaction %u\n",
763 					       next_commit_ID);
764 					err = -EFSBADCRC;
765 					brelse(bh);
766 					goto failed;
767 				}
768 			ignore_crc_mismatch:
769 				/*
770 				 * It likely does not belong to same journal,
771 				 * just end this recovery with success.
772 				 */
773 				jbd2_debug(1, "JBD2: Invalid checksum ignored in transaction %u, likely stale data\n",
774 					  next_commit_ID);
775 				brelse(bh);
776 				goto done;
777 			}
778 
779 			/*
780 			 * Found an expected commit block: if checksums
781 			 * are present, verify them in PASS_SCAN; else not
782 			 * much to do other than move on to the next sequence
783 			 * number.
784 			 */
785 			if (pass == PASS_SCAN &&
786 			    jbd2_has_feature_checksum(journal)) {
787 				struct commit_header *cbh =
788 					(struct commit_header *)bh->b_data;
789 				unsigned found_chksum =
790 					be32_to_cpu(cbh->h_chksum[0]);
791 
792 				if (info->end_transaction) {
793 					journal->j_failed_commit =
794 						info->end_transaction;
795 					brelse(bh);
796 					break;
797 				}
798 
799 				/* Neither checksum match nor unused? */
800 				if (!((crc32_sum == found_chksum &&
801 				       cbh->h_chksum_type ==
802 						JBD2_CRC32_CHKSUM &&
803 				       cbh->h_chksum_size ==
804 						JBD2_CRC32_CHKSUM_SIZE) ||
805 				      (cbh->h_chksum_type == 0 &&
806 				       cbh->h_chksum_size == 0 &&
807 				       found_chksum == 0)))
808 					goto chksum_error;
809 
810 				crc32_sum = ~0;
811 			}
812 			if (pass == PASS_SCAN &&
813 			    !jbd2_commit_block_csum_verify(journal,
814 							   bh->b_data)) {
815 			chksum_error:
816 				if (commit_time < last_trans_commit_time)
817 					goto ignore_crc_mismatch;
818 				info->end_transaction = next_commit_ID;
819 				info->head_block = head_block;
820 
821 				if (!jbd2_has_feature_async_commit(journal)) {
822 					journal->j_failed_commit =
823 						next_commit_ID;
824 					brelse(bh);
825 					break;
826 				}
827 			}
828 			if (pass == PASS_SCAN) {
829 				last_trans_commit_time = commit_time;
830 				head_block = next_log_block;
831 			}
832 			brelse(bh);
833 			next_commit_ID++;
834 			continue;
835 
836 		case JBD2_REVOKE_BLOCK:
837 			/*
838 			 * Check revoke block crc in pass_scan, if csum verify
839 			 * failed, check commit block time later.
840 			 */
841 			if (pass == PASS_SCAN &&
842 			    !jbd2_descriptor_block_csum_verify(journal,
843 							       bh->b_data)) {
844 				jbd2_debug(1, "JBD2: invalid revoke block found in %lu\n",
845 					  next_log_block);
846 				need_check_commit_time = true;
847 			}
848 			/* If we aren't in the REVOKE pass, then we can
849 			 * just skip over this block. */
850 			if (pass != PASS_REVOKE) {
851 				brelse(bh);
852 				continue;
853 			}
854 
855 			err = scan_revoke_records(journal, bh,
856 						  next_commit_ID, info);
857 			brelse(bh);
858 			if (err)
859 				goto failed;
860 			continue;
861 
862 		default:
863 			jbd2_debug(3, "Unrecognised magic %d, end of scan.\n",
864 				  blocktype);
865 			brelse(bh);
866 			goto done;
867 		}
868 	}
869 
870  done:
871 	/*
872 	 * We broke out of the log scan loop: either we came to the
873 	 * known end of the log or we found an unexpected block in the
874 	 * log.  If the latter happened, then we know that the "current"
875 	 * transaction marks the end of the valid log.
876 	 */
877 
878 	if (pass == PASS_SCAN) {
879 		if (!info->end_transaction)
880 			info->end_transaction = next_commit_ID;
881 		if (!info->head_block)
882 			info->head_block = head_block;
883 	} else {
884 		/* It's really bad news if different passes end up at
885 		 * different places (but possible due to IO errors). */
886 		if (info->end_transaction != next_commit_ID) {
887 			printk(KERN_ERR "JBD2: recovery pass %d ended at "
888 				"transaction %u, expected %u\n",
889 				pass, next_commit_ID, info->end_transaction);
890 			if (!success)
891 				success = -EIO;
892 		}
893 	}
894 
895 	if (jbd2_has_feature_fast_commit(journal) &&  pass != PASS_REVOKE) {
896 		err = fc_do_one_pass(journal, info, pass);
897 		if (err)
898 			success = err;
899 	}
900 
901 	if (block_error && success == 0)
902 		success = -EIO;
903 	return success;
904 
905  failed:
906 	return err;
907 }
908 
909 /* Scan a revoke record, marking all blocks mentioned as revoked. */
910 
911 static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
912 			       tid_t sequence, struct recovery_info *info)
913 {
914 	jbd2_journal_revoke_header_t *header;
915 	int offset, max;
916 	unsigned csum_size = 0;
917 	__u32 rcount;
918 	int record_len = 4;
919 
920 	header = (jbd2_journal_revoke_header_t *) bh->b_data;
921 	offset = sizeof(jbd2_journal_revoke_header_t);
922 	rcount = be32_to_cpu(header->r_count);
923 
924 	if (jbd2_journal_has_csum_v2or3(journal))
925 		csum_size = sizeof(struct jbd2_journal_block_tail);
926 	if (rcount > journal->j_blocksize - csum_size)
927 		return -EINVAL;
928 	max = rcount;
929 
930 	if (jbd2_has_feature_64bit(journal))
931 		record_len = 8;
932 
933 	while (offset + record_len <= max) {
934 		unsigned long long blocknr;
935 		int err;
936 
937 		if (record_len == 4)
938 			blocknr = be32_to_cpu(* ((__be32 *) (bh->b_data+offset)));
939 		else
940 			blocknr = be64_to_cpu(* ((__be64 *) (bh->b_data+offset)));
941 		offset += record_len;
942 		err = jbd2_journal_set_revoke(journal, blocknr, sequence);
943 		if (err)
944 			return err;
945 		++info->nr_revokes;
946 	}
947 	return 0;
948 }
949