xref: /openbmc/linux/fs/ext4/indirect.c (revision b6bec26c)
1 /*
2  *  linux/fs/ext4/indirect.c
3  *
4  *  from
5  *
6  *  linux/fs/ext4/inode.c
7  *
8  * Copyright (C) 1992, 1993, 1994, 1995
9  * Remy Card (card@masi.ibp.fr)
10  * Laboratoire MASI - Institut Blaise Pascal
11  * Universite Pierre et Marie Curie (Paris VI)
12  *
13  *  from
14  *
15  *  linux/fs/minix/inode.c
16  *
17  *  Copyright (C) 1991, 1992  Linus Torvalds
18  *
19  *  Goal-directed block allocation by Stephen Tweedie
20  *	(sct@redhat.com), 1993, 1998
21  */
22 
23 #include "ext4_jbd2.h"
24 #include "truncate.h"
25 #include "ext4_extents.h"	/* Needed for EXT_MAX_BLOCKS */
26 
27 #include <trace/events/ext4.h>
28 
29 typedef struct {
30 	__le32	*p;
31 	__le32	key;
32 	struct buffer_head *bh;
33 } Indirect;
34 
35 static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v)
36 {
37 	p->key = *(p->p = v);
38 	p->bh = bh;
39 }
40 
41 /**
42  *	ext4_block_to_path - parse the block number into array of offsets
43  *	@inode: inode in question (we are only interested in its superblock)
44  *	@i_block: block number to be parsed
45  *	@offsets: array to store the offsets in
46  *	@boundary: set this non-zero if the referred-to block is likely to be
47  *	       followed (on disk) by an indirect block.
48  *
49  *	To store the locations of file's data ext4 uses a data structure common
50  *	for UNIX filesystems - tree of pointers anchored in the inode, with
51  *	data blocks at leaves and indirect blocks in intermediate nodes.
52  *	This function translates the block number into path in that tree -
53  *	return value is the path length and @offsets[n] is the offset of
54  *	pointer to (n+1)th node in the nth one. If @block is out of range
55  *	(negative or too large) warning is printed and zero returned.
56  *
57  *	Note: function doesn't find node addresses, so no IO is needed. All
58  *	we need to know is the capacity of indirect blocks (taken from the
59  *	inode->i_sb).
60  */
61 
62 /*
63  * Portability note: the last comparison (check that we fit into triple
64  * indirect block) is spelled differently, because otherwise on an
65  * architecture with 32-bit longs and 8Kb pages we might get into trouble
66  * if our filesystem had 8Kb blocks. We might use long long, but that would
67  * kill us on x86. Oh, well, at least the sign propagation does not matter -
68  * i_block would have to be negative in the very beginning, so we would not
69  * get there at all.
70  */
71 
72 static int ext4_block_to_path(struct inode *inode,
73 			      ext4_lblk_t i_block,
74 			      ext4_lblk_t offsets[4], int *boundary)
75 {
76 	int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb);
77 	int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb);
78 	const long direct_blocks = EXT4_NDIR_BLOCKS,
79 		indirect_blocks = ptrs,
80 		double_blocks = (1 << (ptrs_bits * 2));
81 	int n = 0;
82 	int final = 0;
83 
84 	if (i_block < direct_blocks) {
85 		offsets[n++] = i_block;
86 		final = direct_blocks;
87 	} else if ((i_block -= direct_blocks) < indirect_blocks) {
88 		offsets[n++] = EXT4_IND_BLOCK;
89 		offsets[n++] = i_block;
90 		final = ptrs;
91 	} else if ((i_block -= indirect_blocks) < double_blocks) {
92 		offsets[n++] = EXT4_DIND_BLOCK;
93 		offsets[n++] = i_block >> ptrs_bits;
94 		offsets[n++] = i_block & (ptrs - 1);
95 		final = ptrs;
96 	} else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) {
97 		offsets[n++] = EXT4_TIND_BLOCK;
98 		offsets[n++] = i_block >> (ptrs_bits * 2);
99 		offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1);
100 		offsets[n++] = i_block & (ptrs - 1);
101 		final = ptrs;
102 	} else {
103 		ext4_warning(inode->i_sb, "block %lu > max in inode %lu",
104 			     i_block + direct_blocks +
105 			     indirect_blocks + double_blocks, inode->i_ino);
106 	}
107 	if (boundary)
108 		*boundary = final - 1 - (i_block & (ptrs - 1));
109 	return n;
110 }
111 
112 /**
113  *	ext4_get_branch - read the chain of indirect blocks leading to data
114  *	@inode: inode in question
115  *	@depth: depth of the chain (1 - direct pointer, etc.)
116  *	@offsets: offsets of pointers in inode/indirect blocks
117  *	@chain: place to store the result
118  *	@err: here we store the error value
119  *
120  *	Function fills the array of triples <key, p, bh> and returns %NULL
121  *	if everything went OK or the pointer to the last filled triple
122  *	(incomplete one) otherwise. Upon the return chain[i].key contains
123  *	the number of (i+1)-th block in the chain (as it is stored in memory,
124  *	i.e. little-endian 32-bit), chain[i].p contains the address of that
125  *	number (it points into struct inode for i==0 and into the bh->b_data
126  *	for i>0) and chain[i].bh points to the buffer_head of i-th indirect
127  *	block for i>0 and NULL for i==0. In other words, it holds the block
128  *	numbers of the chain, addresses they were taken from (and where we can
129  *	verify that chain did not change) and buffer_heads hosting these
130  *	numbers.
131  *
132  *	Function stops when it stumbles upon zero pointer (absent block)
133  *		(pointer to last triple returned, *@err == 0)
134  *	or when it gets an IO error reading an indirect block
135  *		(ditto, *@err == -EIO)
136  *	or when it reads all @depth-1 indirect blocks successfully and finds
137  *	the whole chain, all way to the data (returns %NULL, *err == 0).
138  *
139  *      Need to be called with
140  *      down_read(&EXT4_I(inode)->i_data_sem)
141  */
142 static Indirect *ext4_get_branch(struct inode *inode, int depth,
143 				 ext4_lblk_t  *offsets,
144 				 Indirect chain[4], int *err)
145 {
146 	struct super_block *sb = inode->i_sb;
147 	Indirect *p = chain;
148 	struct buffer_head *bh;
149 
150 	*err = 0;
151 	/* i_data is not going away, no lock needed */
152 	add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets);
153 	if (!p->key)
154 		goto no_block;
155 	while (--depth) {
156 		bh = sb_getblk(sb, le32_to_cpu(p->key));
157 		if (unlikely(!bh))
158 			goto failure;
159 
160 		if (!bh_uptodate_or_lock(bh)) {
161 			if (bh_submit_read(bh) < 0) {
162 				put_bh(bh);
163 				goto failure;
164 			}
165 			/* validate block references */
166 			if (ext4_check_indirect_blockref(inode, bh)) {
167 				put_bh(bh);
168 				goto failure;
169 			}
170 		}
171 
172 		add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets);
173 		/* Reader: end */
174 		if (!p->key)
175 			goto no_block;
176 	}
177 	return NULL;
178 
179 failure:
180 	*err = -EIO;
181 no_block:
182 	return p;
183 }
184 
185 /**
186  *	ext4_find_near - find a place for allocation with sufficient locality
187  *	@inode: owner
188  *	@ind: descriptor of indirect block.
189  *
190  *	This function returns the preferred place for block allocation.
191  *	It is used when heuristic for sequential allocation fails.
192  *	Rules are:
193  *	  + if there is a block to the left of our position - allocate near it.
194  *	  + if pointer will live in indirect block - allocate near that block.
195  *	  + if pointer will live in inode - allocate in the same
196  *	    cylinder group.
197  *
198  * In the latter case we colour the starting block by the callers PID to
199  * prevent it from clashing with concurrent allocations for a different inode
200  * in the same block group.   The PID is used here so that functionally related
201  * files will be close-by on-disk.
202  *
203  *	Caller must make sure that @ind is valid and will stay that way.
204  */
205 static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind)
206 {
207 	struct ext4_inode_info *ei = EXT4_I(inode);
208 	__le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data;
209 	__le32 *p;
210 
211 	/* Try to find previous block */
212 	for (p = ind->p - 1; p >= start; p--) {
213 		if (*p)
214 			return le32_to_cpu(*p);
215 	}
216 
217 	/* No such thing, so let's try location of indirect block */
218 	if (ind->bh)
219 		return ind->bh->b_blocknr;
220 
221 	/*
222 	 * It is going to be referred to from the inode itself? OK, just put it
223 	 * into the same cylinder group then.
224 	 */
225 	return ext4_inode_to_goal_block(inode);
226 }
227 
228 /**
229  *	ext4_find_goal - find a preferred place for allocation.
230  *	@inode: owner
231  *	@block:  block we want
232  *	@partial: pointer to the last triple within a chain
233  *
234  *	Normally this function find the preferred place for block allocation,
235  *	returns it.
236  *	Because this is only used for non-extent files, we limit the block nr
237  *	to 32 bits.
238  */
239 static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block,
240 				   Indirect *partial)
241 {
242 	ext4_fsblk_t goal;
243 
244 	/*
245 	 * XXX need to get goal block from mballoc's data structures
246 	 */
247 
248 	goal = ext4_find_near(inode, partial);
249 	goal = goal & EXT4_MAX_BLOCK_FILE_PHYS;
250 	return goal;
251 }
252 
253 /**
254  *	ext4_blks_to_allocate - Look up the block map and count the number
255  *	of direct blocks need to be allocated for the given branch.
256  *
257  *	@branch: chain of indirect blocks
258  *	@k: number of blocks need for indirect blocks
259  *	@blks: number of data blocks to be mapped.
260  *	@blocks_to_boundary:  the offset in the indirect block
261  *
262  *	return the total number of blocks to be allocate, including the
263  *	direct and indirect blocks.
264  */
265 static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks,
266 				 int blocks_to_boundary)
267 {
268 	unsigned int count = 0;
269 
270 	/*
271 	 * Simple case, [t,d]Indirect block(s) has not allocated yet
272 	 * then it's clear blocks on that path have not allocated
273 	 */
274 	if (k > 0) {
275 		/* right now we don't handle cross boundary allocation */
276 		if (blks < blocks_to_boundary + 1)
277 			count += blks;
278 		else
279 			count += blocks_to_boundary + 1;
280 		return count;
281 	}
282 
283 	count++;
284 	while (count < blks && count <= blocks_to_boundary &&
285 		le32_to_cpu(*(branch[0].p + count)) == 0) {
286 		count++;
287 	}
288 	return count;
289 }
290 
291 /**
292  *	ext4_alloc_blocks: multiple allocate blocks needed for a branch
293  *	@handle: handle for this transaction
294  *	@inode: inode which needs allocated blocks
295  *	@iblock: the logical block to start allocated at
296  *	@goal: preferred physical block of allocation
297  *	@indirect_blks: the number of blocks need to allocate for indirect
298  *			blocks
299  *	@blks: number of desired blocks
300  *	@new_blocks: on return it will store the new block numbers for
301  *	the indirect blocks(if needed) and the first direct block,
302  *	@err: on return it will store the error code
303  *
304  *	This function will return the number of blocks allocated as
305  *	requested by the passed-in parameters.
306  */
307 static int ext4_alloc_blocks(handle_t *handle, struct inode *inode,
308 			     ext4_lblk_t iblock, ext4_fsblk_t goal,
309 			     int indirect_blks, int blks,
310 			     ext4_fsblk_t new_blocks[4], int *err)
311 {
312 	struct ext4_allocation_request ar;
313 	int target, i;
314 	unsigned long count = 0, blk_allocated = 0;
315 	int index = 0;
316 	ext4_fsblk_t current_block = 0;
317 	int ret = 0;
318 
319 	/*
320 	 * Here we try to allocate the requested multiple blocks at once,
321 	 * on a best-effort basis.
322 	 * To build a branch, we should allocate blocks for
323 	 * the indirect blocks(if not allocated yet), and at least
324 	 * the first direct block of this branch.  That's the
325 	 * minimum number of blocks need to allocate(required)
326 	 */
327 	/* first we try to allocate the indirect blocks */
328 	target = indirect_blks;
329 	while (target > 0) {
330 		count = target;
331 		/* allocating blocks for indirect blocks and direct blocks */
332 		current_block = ext4_new_meta_blocks(handle, inode, goal,
333 						     0, &count, err);
334 		if (*err)
335 			goto failed_out;
336 
337 		if (unlikely(current_block + count > EXT4_MAX_BLOCK_FILE_PHYS)) {
338 			EXT4_ERROR_INODE(inode,
339 					 "current_block %llu + count %lu > %d!",
340 					 current_block, count,
341 					 EXT4_MAX_BLOCK_FILE_PHYS);
342 			*err = -EIO;
343 			goto failed_out;
344 		}
345 
346 		target -= count;
347 		/* allocate blocks for indirect blocks */
348 		while (index < indirect_blks && count) {
349 			new_blocks[index++] = current_block++;
350 			count--;
351 		}
352 		if (count > 0) {
353 			/*
354 			 * save the new block number
355 			 * for the first direct block
356 			 */
357 			new_blocks[index] = current_block;
358 			printk(KERN_INFO "%s returned more blocks than "
359 						"requested\n", __func__);
360 			WARN_ON(1);
361 			break;
362 		}
363 	}
364 
365 	target = blks - count ;
366 	blk_allocated = count;
367 	if (!target)
368 		goto allocated;
369 	/* Now allocate data blocks */
370 	memset(&ar, 0, sizeof(ar));
371 	ar.inode = inode;
372 	ar.goal = goal;
373 	ar.len = target;
374 	ar.logical = iblock;
375 	if (S_ISREG(inode->i_mode))
376 		/* enable in-core preallocation only for regular files */
377 		ar.flags = EXT4_MB_HINT_DATA;
378 
379 	current_block = ext4_mb_new_blocks(handle, &ar, err);
380 	if (unlikely(current_block + ar.len > EXT4_MAX_BLOCK_FILE_PHYS)) {
381 		EXT4_ERROR_INODE(inode,
382 				 "current_block %llu + ar.len %d > %d!",
383 				 current_block, ar.len,
384 				 EXT4_MAX_BLOCK_FILE_PHYS);
385 		*err = -EIO;
386 		goto failed_out;
387 	}
388 
389 	if (*err && (target == blks)) {
390 		/*
391 		 * if the allocation failed and we didn't allocate
392 		 * any blocks before
393 		 */
394 		goto failed_out;
395 	}
396 	if (!*err) {
397 		if (target == blks) {
398 			/*
399 			 * save the new block number
400 			 * for the first direct block
401 			 */
402 			new_blocks[index] = current_block;
403 		}
404 		blk_allocated += ar.len;
405 	}
406 allocated:
407 	/* total number of blocks allocated for direct blocks */
408 	ret = blk_allocated;
409 	*err = 0;
410 	return ret;
411 failed_out:
412 	for (i = 0; i < index; i++)
413 		ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, 0);
414 	return ret;
415 }
416 
417 /**
418  *	ext4_alloc_branch - allocate and set up a chain of blocks.
419  *	@handle: handle for this transaction
420  *	@inode: owner
421  *	@indirect_blks: number of allocated indirect blocks
422  *	@blks: number of allocated direct blocks
423  *	@goal: preferred place for allocation
424  *	@offsets: offsets (in the blocks) to store the pointers to next.
425  *	@branch: place to store the chain in.
426  *
427  *	This function allocates blocks, zeroes out all but the last one,
428  *	links them into chain and (if we are synchronous) writes them to disk.
429  *	In other words, it prepares a branch that can be spliced onto the
430  *	inode. It stores the information about that chain in the branch[], in
431  *	the same format as ext4_get_branch() would do. We are calling it after
432  *	we had read the existing part of chain and partial points to the last
433  *	triple of that (one with zero ->key). Upon the exit we have the same
434  *	picture as after the successful ext4_get_block(), except that in one
435  *	place chain is disconnected - *branch->p is still zero (we did not
436  *	set the last link), but branch->key contains the number that should
437  *	be placed into *branch->p to fill that gap.
438  *
439  *	If allocation fails we free all blocks we've allocated (and forget
440  *	their buffer_heads) and return the error value the from failed
441  *	ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain
442  *	as described above and return 0.
443  */
444 static int ext4_alloc_branch(handle_t *handle, struct inode *inode,
445 			     ext4_lblk_t iblock, int indirect_blks,
446 			     int *blks, ext4_fsblk_t goal,
447 			     ext4_lblk_t *offsets, Indirect *branch)
448 {
449 	int blocksize = inode->i_sb->s_blocksize;
450 	int i, n = 0;
451 	int err = 0;
452 	struct buffer_head *bh;
453 	int num;
454 	ext4_fsblk_t new_blocks[4];
455 	ext4_fsblk_t current_block;
456 
457 	num = ext4_alloc_blocks(handle, inode, iblock, goal, indirect_blks,
458 				*blks, new_blocks, &err);
459 	if (err)
460 		return err;
461 
462 	branch[0].key = cpu_to_le32(new_blocks[0]);
463 	/*
464 	 * metadata blocks and data blocks are allocated.
465 	 */
466 	for (n = 1; n <= indirect_blks;  n++) {
467 		/*
468 		 * Get buffer_head for parent block, zero it out
469 		 * and set the pointer to new one, then send
470 		 * parent to disk.
471 		 */
472 		bh = sb_getblk(inode->i_sb, new_blocks[n-1]);
473 		if (unlikely(!bh)) {
474 			err = -EIO;
475 			goto failed;
476 		}
477 
478 		branch[n].bh = bh;
479 		lock_buffer(bh);
480 		BUFFER_TRACE(bh, "call get_create_access");
481 		err = ext4_journal_get_create_access(handle, bh);
482 		if (err) {
483 			/* Don't brelse(bh) here; it's done in
484 			 * ext4_journal_forget() below */
485 			unlock_buffer(bh);
486 			goto failed;
487 		}
488 
489 		memset(bh->b_data, 0, blocksize);
490 		branch[n].p = (__le32 *) bh->b_data + offsets[n];
491 		branch[n].key = cpu_to_le32(new_blocks[n]);
492 		*branch[n].p = branch[n].key;
493 		if (n == indirect_blks) {
494 			current_block = new_blocks[n];
495 			/*
496 			 * End of chain, update the last new metablock of
497 			 * the chain to point to the new allocated
498 			 * data blocks numbers
499 			 */
500 			for (i = 1; i < num; i++)
501 				*(branch[n].p + i) = cpu_to_le32(++current_block);
502 		}
503 		BUFFER_TRACE(bh, "marking uptodate");
504 		set_buffer_uptodate(bh);
505 		unlock_buffer(bh);
506 
507 		BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
508 		err = ext4_handle_dirty_metadata(handle, inode, bh);
509 		if (err)
510 			goto failed;
511 	}
512 	*blks = num;
513 	return err;
514 failed:
515 	/* Allocation failed, free what we already allocated */
516 	ext4_free_blocks(handle, inode, NULL, new_blocks[0], 1, 0);
517 	for (i = 1; i <= n ; i++) {
518 		/*
519 		 * branch[i].bh is newly allocated, so there is no
520 		 * need to revoke the block, which is why we don't
521 		 * need to set EXT4_FREE_BLOCKS_METADATA.
522 		 */
523 		ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1,
524 				 EXT4_FREE_BLOCKS_FORGET);
525 	}
526 	for (i = n+1; i < indirect_blks; i++)
527 		ext4_free_blocks(handle, inode, NULL, new_blocks[i], 1, 0);
528 
529 	ext4_free_blocks(handle, inode, NULL, new_blocks[i], num, 0);
530 
531 	return err;
532 }
533 
534 /**
535  * ext4_splice_branch - splice the allocated branch onto inode.
536  * @handle: handle for this transaction
537  * @inode: owner
538  * @block: (logical) number of block we are adding
539  * @chain: chain of indirect blocks (with a missing link - see
540  *	ext4_alloc_branch)
541  * @where: location of missing link
542  * @num:   number of indirect blocks we are adding
543  * @blks:  number of direct blocks we are adding
544  *
545  * This function fills the missing link and does all housekeeping needed in
546  * inode (->i_blocks, etc.). In case of success we end up with the full
547  * chain to new block and return 0.
548  */
549 static int ext4_splice_branch(handle_t *handle, struct inode *inode,
550 			      ext4_lblk_t block, Indirect *where, int num,
551 			      int blks)
552 {
553 	int i;
554 	int err = 0;
555 	ext4_fsblk_t current_block;
556 
557 	/*
558 	 * If we're splicing into a [td]indirect block (as opposed to the
559 	 * inode) then we need to get write access to the [td]indirect block
560 	 * before the splice.
561 	 */
562 	if (where->bh) {
563 		BUFFER_TRACE(where->bh, "get_write_access");
564 		err = ext4_journal_get_write_access(handle, where->bh);
565 		if (err)
566 			goto err_out;
567 	}
568 	/* That's it */
569 
570 	*where->p = where->key;
571 
572 	/*
573 	 * Update the host buffer_head or inode to point to more just allocated
574 	 * direct blocks blocks
575 	 */
576 	if (num == 0 && blks > 1) {
577 		current_block = le32_to_cpu(where->key) + 1;
578 		for (i = 1; i < blks; i++)
579 			*(where->p + i) = cpu_to_le32(current_block++);
580 	}
581 
582 	/* We are done with atomic stuff, now do the rest of housekeeping */
583 	/* had we spliced it onto indirect block? */
584 	if (where->bh) {
585 		/*
586 		 * If we spliced it onto an indirect block, we haven't
587 		 * altered the inode.  Note however that if it is being spliced
588 		 * onto an indirect block at the very end of the file (the
589 		 * file is growing) then we *will* alter the inode to reflect
590 		 * the new i_size.  But that is not done here - it is done in
591 		 * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode.
592 		 */
593 		jbd_debug(5, "splicing indirect only\n");
594 		BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata");
595 		err = ext4_handle_dirty_metadata(handle, inode, where->bh);
596 		if (err)
597 			goto err_out;
598 	} else {
599 		/*
600 		 * OK, we spliced it into the inode itself on a direct block.
601 		 */
602 		ext4_mark_inode_dirty(handle, inode);
603 		jbd_debug(5, "splicing direct\n");
604 	}
605 	return err;
606 
607 err_out:
608 	for (i = 1; i <= num; i++) {
609 		/*
610 		 * branch[i].bh is newly allocated, so there is no
611 		 * need to revoke the block, which is why we don't
612 		 * need to set EXT4_FREE_BLOCKS_METADATA.
613 		 */
614 		ext4_free_blocks(handle, inode, where[i].bh, 0, 1,
615 				 EXT4_FREE_BLOCKS_FORGET);
616 	}
617 	ext4_free_blocks(handle, inode, NULL, le32_to_cpu(where[num].key),
618 			 blks, 0);
619 
620 	return err;
621 }
622 
623 /*
624  * The ext4_ind_map_blocks() function handles non-extents inodes
625  * (i.e., using the traditional indirect/double-indirect i_blocks
626  * scheme) for ext4_map_blocks().
627  *
628  * Allocation strategy is simple: if we have to allocate something, we will
629  * have to go the whole way to leaf. So let's do it before attaching anything
630  * to tree, set linkage between the newborn blocks, write them if sync is
631  * required, recheck the path, free and repeat if check fails, otherwise
632  * set the last missing link (that will protect us from any truncate-generated
633  * removals - all blocks on the path are immune now) and possibly force the
634  * write on the parent block.
635  * That has a nice additional property: no special recovery from the failed
636  * allocations is needed - we simply release blocks and do not touch anything
637  * reachable from inode.
638  *
639  * `handle' can be NULL if create == 0.
640  *
641  * return > 0, # of blocks mapped or allocated.
642  * return = 0, if plain lookup failed.
643  * return < 0, error case.
644  *
645  * The ext4_ind_get_blocks() function should be called with
646  * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem
647  * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or
648  * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system
649  * blocks.
650  */
651 int ext4_ind_map_blocks(handle_t *handle, struct inode *inode,
652 			struct ext4_map_blocks *map,
653 			int flags)
654 {
655 	int err = -EIO;
656 	ext4_lblk_t offsets[4];
657 	Indirect chain[4];
658 	Indirect *partial;
659 	ext4_fsblk_t goal;
660 	int indirect_blks;
661 	int blocks_to_boundary = 0;
662 	int depth;
663 	int count = 0;
664 	ext4_fsblk_t first_block = 0;
665 
666 	trace_ext4_ind_map_blocks_enter(inode, map->m_lblk, map->m_len, flags);
667 	J_ASSERT(!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)));
668 	J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0);
669 	depth = ext4_block_to_path(inode, map->m_lblk, offsets,
670 				   &blocks_to_boundary);
671 
672 	if (depth == 0)
673 		goto out;
674 
675 	partial = ext4_get_branch(inode, depth, offsets, chain, &err);
676 
677 	/* Simplest case - block found, no allocation needed */
678 	if (!partial) {
679 		first_block = le32_to_cpu(chain[depth - 1].key);
680 		count++;
681 		/*map more blocks*/
682 		while (count < map->m_len && count <= blocks_to_boundary) {
683 			ext4_fsblk_t blk;
684 
685 			blk = le32_to_cpu(*(chain[depth-1].p + count));
686 
687 			if (blk == first_block + count)
688 				count++;
689 			else
690 				break;
691 		}
692 		goto got_it;
693 	}
694 
695 	/* Next simple case - plain lookup or failed read of indirect block */
696 	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0 || err == -EIO)
697 		goto cleanup;
698 
699 	/*
700 	 * Okay, we need to do block allocation.
701 	*/
702 	if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
703 				       EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
704 		EXT4_ERROR_INODE(inode, "Can't allocate blocks for "
705 				 "non-extent mapped inodes with bigalloc");
706 		return -ENOSPC;
707 	}
708 
709 	goal = ext4_find_goal(inode, map->m_lblk, partial);
710 
711 	/* the number of blocks need to allocate for [d,t]indirect blocks */
712 	indirect_blks = (chain + depth) - partial - 1;
713 
714 	/*
715 	 * Next look up the indirect map to count the totoal number of
716 	 * direct blocks to allocate for this branch.
717 	 */
718 	count = ext4_blks_to_allocate(partial, indirect_blks,
719 				      map->m_len, blocks_to_boundary);
720 	/*
721 	 * Block out ext4_truncate while we alter the tree
722 	 */
723 	err = ext4_alloc_branch(handle, inode, map->m_lblk, indirect_blks,
724 				&count, goal,
725 				offsets + (partial - chain), partial);
726 
727 	/*
728 	 * The ext4_splice_branch call will free and forget any buffers
729 	 * on the new chain if there is a failure, but that risks using
730 	 * up transaction credits, especially for bitmaps where the
731 	 * credits cannot be returned.  Can we handle this somehow?  We
732 	 * may need to return -EAGAIN upwards in the worst case.  --sct
733 	 */
734 	if (!err)
735 		err = ext4_splice_branch(handle, inode, map->m_lblk,
736 					 partial, indirect_blks, count);
737 	if (err)
738 		goto cleanup;
739 
740 	map->m_flags |= EXT4_MAP_NEW;
741 
742 	ext4_update_inode_fsync_trans(handle, inode, 1);
743 got_it:
744 	map->m_flags |= EXT4_MAP_MAPPED;
745 	map->m_pblk = le32_to_cpu(chain[depth-1].key);
746 	map->m_len = count;
747 	if (count > blocks_to_boundary)
748 		map->m_flags |= EXT4_MAP_BOUNDARY;
749 	err = count;
750 	/* Clean up and exit */
751 	partial = chain + depth - 1;	/* the whole chain */
752 cleanup:
753 	while (partial > chain) {
754 		BUFFER_TRACE(partial->bh, "call brelse");
755 		brelse(partial->bh);
756 		partial--;
757 	}
758 out:
759 	trace_ext4_ind_map_blocks_exit(inode, map, err);
760 	return err;
761 }
762 
763 /*
764  * O_DIRECT for ext3 (or indirect map) based files
765  *
766  * If the O_DIRECT write will extend the file then add this inode to the
767  * orphan list.  So recovery will truncate it back to the original size
768  * if the machine crashes during the write.
769  *
770  * If the O_DIRECT write is intantiating holes inside i_size and the machine
771  * crashes then stale disk data _may_ be exposed inside the file. But current
772  * VFS code falls back into buffered path in that case so we are safe.
773  */
774 ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb,
775 			   const struct iovec *iov, loff_t offset,
776 			   unsigned long nr_segs)
777 {
778 	struct file *file = iocb->ki_filp;
779 	struct inode *inode = file->f_mapping->host;
780 	struct ext4_inode_info *ei = EXT4_I(inode);
781 	handle_t *handle;
782 	ssize_t ret;
783 	int orphan = 0;
784 	size_t count = iov_length(iov, nr_segs);
785 	int retries = 0;
786 
787 	if (rw == WRITE) {
788 		loff_t final_size = offset + count;
789 
790 		if (final_size > inode->i_size) {
791 			/* Credits for sb + inode write */
792 			handle = ext4_journal_start(inode, 2);
793 			if (IS_ERR(handle)) {
794 				ret = PTR_ERR(handle);
795 				goto out;
796 			}
797 			ret = ext4_orphan_add(handle, inode);
798 			if (ret) {
799 				ext4_journal_stop(handle);
800 				goto out;
801 			}
802 			orphan = 1;
803 			ei->i_disksize = inode->i_size;
804 			ext4_journal_stop(handle);
805 		}
806 	}
807 
808 retry:
809 	if (rw == READ && ext4_should_dioread_nolock(inode)) {
810 		if (unlikely(atomic_read(&EXT4_I(inode)->i_unwritten))) {
811 			mutex_lock(&inode->i_mutex);
812 			ext4_flush_unwritten_io(inode);
813 			mutex_unlock(&inode->i_mutex);
814 		}
815 		/*
816 		 * Nolock dioread optimization may be dynamically disabled
817 		 * via ext4_inode_block_unlocked_dio(). Check inode's state
818 		 * while holding extra i_dio_count ref.
819 		 */
820 		atomic_inc(&inode->i_dio_count);
821 		smp_mb();
822 		if (unlikely(ext4_test_inode_state(inode,
823 						    EXT4_STATE_DIOREAD_LOCK))) {
824 			inode_dio_done(inode);
825 			goto locked;
826 		}
827 		ret = __blockdev_direct_IO(rw, iocb, inode,
828 				 inode->i_sb->s_bdev, iov,
829 				 offset, nr_segs,
830 				 ext4_get_block, NULL, NULL, 0);
831 		inode_dio_done(inode);
832 	} else {
833 locked:
834 		ret = blockdev_direct_IO(rw, iocb, inode, iov,
835 				 offset, nr_segs, ext4_get_block);
836 
837 		if (unlikely((rw & WRITE) && ret < 0)) {
838 			loff_t isize = i_size_read(inode);
839 			loff_t end = offset + iov_length(iov, nr_segs);
840 
841 			if (end > isize)
842 				ext4_truncate_failed_write(inode);
843 		}
844 	}
845 	if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
846 		goto retry;
847 
848 	if (orphan) {
849 		int err;
850 
851 		/* Credits for sb + inode write */
852 		handle = ext4_journal_start(inode, 2);
853 		if (IS_ERR(handle)) {
854 			/* This is really bad luck. We've written the data
855 			 * but cannot extend i_size. Bail out and pretend
856 			 * the write failed... */
857 			ret = PTR_ERR(handle);
858 			if (inode->i_nlink)
859 				ext4_orphan_del(NULL, inode);
860 
861 			goto out;
862 		}
863 		if (inode->i_nlink)
864 			ext4_orphan_del(handle, inode);
865 		if (ret > 0) {
866 			loff_t end = offset + ret;
867 			if (end > inode->i_size) {
868 				ei->i_disksize = end;
869 				i_size_write(inode, end);
870 				/*
871 				 * We're going to return a positive `ret'
872 				 * here due to non-zero-length I/O, so there's
873 				 * no way of reporting error returns from
874 				 * ext4_mark_inode_dirty() to userspace.  So
875 				 * ignore it.
876 				 */
877 				ext4_mark_inode_dirty(handle, inode);
878 			}
879 		}
880 		err = ext4_journal_stop(handle);
881 		if (ret == 0)
882 			ret = err;
883 	}
884 out:
885 	return ret;
886 }
887 
888 /*
889  * Calculate the number of metadata blocks need to reserve
890  * to allocate a new block at @lblocks for non extent file based file
891  */
892 int ext4_ind_calc_metadata_amount(struct inode *inode, sector_t lblock)
893 {
894 	struct ext4_inode_info *ei = EXT4_I(inode);
895 	sector_t dind_mask = ~((sector_t)EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1);
896 	int blk_bits;
897 
898 	if (lblock < EXT4_NDIR_BLOCKS)
899 		return 0;
900 
901 	lblock -= EXT4_NDIR_BLOCKS;
902 
903 	if (ei->i_da_metadata_calc_len &&
904 	    (lblock & dind_mask) == ei->i_da_metadata_calc_last_lblock) {
905 		ei->i_da_metadata_calc_len++;
906 		return 0;
907 	}
908 	ei->i_da_metadata_calc_last_lblock = lblock & dind_mask;
909 	ei->i_da_metadata_calc_len = 1;
910 	blk_bits = order_base_2(lblock);
911 	return (blk_bits / EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb)) + 1;
912 }
913 
914 int ext4_ind_trans_blocks(struct inode *inode, int nrblocks, int chunk)
915 {
916 	int indirects;
917 
918 	/* if nrblocks are contiguous */
919 	if (chunk) {
920 		/*
921 		 * With N contiguous data blocks, we need at most
922 		 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks,
923 		 * 2 dindirect blocks, and 1 tindirect block
924 		 */
925 		return DIV_ROUND_UP(nrblocks,
926 				    EXT4_ADDR_PER_BLOCK(inode->i_sb)) + 4;
927 	}
928 	/*
929 	 * if nrblocks are not contiguous, worse case, each block touch
930 	 * a indirect block, and each indirect block touch a double indirect
931 	 * block, plus a triple indirect block
932 	 */
933 	indirects = nrblocks * 2 + 1;
934 	return indirects;
935 }
936 
937 /*
938  * Truncate transactions can be complex and absolutely huge.  So we need to
939  * be able to restart the transaction at a conventient checkpoint to make
940  * sure we don't overflow the journal.
941  *
942  * start_transaction gets us a new handle for a truncate transaction,
943  * and extend_transaction tries to extend the existing one a bit.  If
944  * extend fails, we need to propagate the failure up and restart the
945  * transaction in the top-level truncate loop. --sct
946  */
947 static handle_t *start_transaction(struct inode *inode)
948 {
949 	handle_t *result;
950 
951 	result = ext4_journal_start(inode, ext4_blocks_for_truncate(inode));
952 	if (!IS_ERR(result))
953 		return result;
954 
955 	ext4_std_error(inode->i_sb, PTR_ERR(result));
956 	return result;
957 }
958 
959 /*
960  * Try to extend this transaction for the purposes of truncation.
961  *
962  * Returns 0 if we managed to create more room.  If we can't create more
963  * room, and the transaction must be restarted we return 1.
964  */
965 static int try_to_extend_transaction(handle_t *handle, struct inode *inode)
966 {
967 	if (!ext4_handle_valid(handle))
968 		return 0;
969 	if (ext4_handle_has_enough_credits(handle, EXT4_RESERVE_TRANS_BLOCKS+1))
970 		return 0;
971 	if (!ext4_journal_extend(handle, ext4_blocks_for_truncate(inode)))
972 		return 0;
973 	return 1;
974 }
975 
976 /*
977  * Probably it should be a library function... search for first non-zero word
978  * or memcmp with zero_page, whatever is better for particular architecture.
979  * Linus?
980  */
981 static inline int all_zeroes(__le32 *p, __le32 *q)
982 {
983 	while (p < q)
984 		if (*p++)
985 			return 0;
986 	return 1;
987 }
988 
989 /**
990  *	ext4_find_shared - find the indirect blocks for partial truncation.
991  *	@inode:	  inode in question
992  *	@depth:	  depth of the affected branch
993  *	@offsets: offsets of pointers in that branch (see ext4_block_to_path)
994  *	@chain:	  place to store the pointers to partial indirect blocks
995  *	@top:	  place to the (detached) top of branch
996  *
997  *	This is a helper function used by ext4_truncate().
998  *
999  *	When we do truncate() we may have to clean the ends of several
1000  *	indirect blocks but leave the blocks themselves alive. Block is
1001  *	partially truncated if some data below the new i_size is referred
1002  *	from it (and it is on the path to the first completely truncated
1003  *	data block, indeed).  We have to free the top of that path along
1004  *	with everything to the right of the path. Since no allocation
1005  *	past the truncation point is possible until ext4_truncate()
1006  *	finishes, we may safely do the latter, but top of branch may
1007  *	require special attention - pageout below the truncation point
1008  *	might try to populate it.
1009  *
1010  *	We atomically detach the top of branch from the tree, store the
1011  *	block number of its root in *@top, pointers to buffer_heads of
1012  *	partially truncated blocks - in @chain[].bh and pointers to
1013  *	their last elements that should not be removed - in
1014  *	@chain[].p. Return value is the pointer to last filled element
1015  *	of @chain.
1016  *
1017  *	The work left to caller to do the actual freeing of subtrees:
1018  *		a) free the subtree starting from *@top
1019  *		b) free the subtrees whose roots are stored in
1020  *			(@chain[i].p+1 .. end of @chain[i].bh->b_data)
1021  *		c) free the subtrees growing from the inode past the @chain[0].
1022  *			(no partially truncated stuff there).  */
1023 
1024 static Indirect *ext4_find_shared(struct inode *inode, int depth,
1025 				  ext4_lblk_t offsets[4], Indirect chain[4],
1026 				  __le32 *top)
1027 {
1028 	Indirect *partial, *p;
1029 	int k, err;
1030 
1031 	*top = 0;
1032 	/* Make k index the deepest non-null offset + 1 */
1033 	for (k = depth; k > 1 && !offsets[k-1]; k--)
1034 		;
1035 	partial = ext4_get_branch(inode, k, offsets, chain, &err);
1036 	/* Writer: pointers */
1037 	if (!partial)
1038 		partial = chain + k-1;
1039 	/*
1040 	 * If the branch acquired continuation since we've looked at it -
1041 	 * fine, it should all survive and (new) top doesn't belong to us.
1042 	 */
1043 	if (!partial->key && *partial->p)
1044 		/* Writer: end */
1045 		goto no_top;
1046 	for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--)
1047 		;
1048 	/*
1049 	 * OK, we've found the last block that must survive. The rest of our
1050 	 * branch should be detached before unlocking. However, if that rest
1051 	 * of branch is all ours and does not grow immediately from the inode
1052 	 * it's easier to cheat and just decrement partial->p.
1053 	 */
1054 	if (p == chain + k - 1 && p > chain) {
1055 		p->p--;
1056 	} else {
1057 		*top = *p->p;
1058 		/* Nope, don't do this in ext4.  Must leave the tree intact */
1059 #if 0
1060 		*p->p = 0;
1061 #endif
1062 	}
1063 	/* Writer: end */
1064 
1065 	while (partial > p) {
1066 		brelse(partial->bh);
1067 		partial--;
1068 	}
1069 no_top:
1070 	return partial;
1071 }
1072 
1073 /*
1074  * Zero a number of block pointers in either an inode or an indirect block.
1075  * If we restart the transaction we must again get write access to the
1076  * indirect block for further modification.
1077  *
1078  * We release `count' blocks on disk, but (last - first) may be greater
1079  * than `count' because there can be holes in there.
1080  *
1081  * Return 0 on success, 1 on invalid block range
1082  * and < 0 on fatal error.
1083  */
1084 static int ext4_clear_blocks(handle_t *handle, struct inode *inode,
1085 			     struct buffer_head *bh,
1086 			     ext4_fsblk_t block_to_free,
1087 			     unsigned long count, __le32 *first,
1088 			     __le32 *last)
1089 {
1090 	__le32 *p;
1091 	int	flags = EXT4_FREE_BLOCKS_FORGET | EXT4_FREE_BLOCKS_VALIDATED;
1092 	int	err;
1093 
1094 	if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
1095 		flags |= EXT4_FREE_BLOCKS_METADATA;
1096 
1097 	if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), block_to_free,
1098 				   count)) {
1099 		EXT4_ERROR_INODE(inode, "attempt to clear invalid "
1100 				 "blocks %llu len %lu",
1101 				 (unsigned long long) block_to_free, count);
1102 		return 1;
1103 	}
1104 
1105 	if (try_to_extend_transaction(handle, inode)) {
1106 		if (bh) {
1107 			BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
1108 			err = ext4_handle_dirty_metadata(handle, inode, bh);
1109 			if (unlikely(err))
1110 				goto out_err;
1111 		}
1112 		err = ext4_mark_inode_dirty(handle, inode);
1113 		if (unlikely(err))
1114 			goto out_err;
1115 		err = ext4_truncate_restart_trans(handle, inode,
1116 					ext4_blocks_for_truncate(inode));
1117 		if (unlikely(err))
1118 			goto out_err;
1119 		if (bh) {
1120 			BUFFER_TRACE(bh, "retaking write access");
1121 			err = ext4_journal_get_write_access(handle, bh);
1122 			if (unlikely(err))
1123 				goto out_err;
1124 		}
1125 	}
1126 
1127 	for (p = first; p < last; p++)
1128 		*p = 0;
1129 
1130 	ext4_free_blocks(handle, inode, NULL, block_to_free, count, flags);
1131 	return 0;
1132 out_err:
1133 	ext4_std_error(inode->i_sb, err);
1134 	return err;
1135 }
1136 
1137 /**
1138  * ext4_free_data - free a list of data blocks
1139  * @handle:	handle for this transaction
1140  * @inode:	inode we are dealing with
1141  * @this_bh:	indirect buffer_head which contains *@first and *@last
1142  * @first:	array of block numbers
1143  * @last:	points immediately past the end of array
1144  *
1145  * We are freeing all blocks referred from that array (numbers are stored as
1146  * little-endian 32-bit) and updating @inode->i_blocks appropriately.
1147  *
1148  * We accumulate contiguous runs of blocks to free.  Conveniently, if these
1149  * blocks are contiguous then releasing them at one time will only affect one
1150  * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't
1151  * actually use a lot of journal space.
1152  *
1153  * @this_bh will be %NULL if @first and @last point into the inode's direct
1154  * block pointers.
1155  */
1156 static void ext4_free_data(handle_t *handle, struct inode *inode,
1157 			   struct buffer_head *this_bh,
1158 			   __le32 *first, __le32 *last)
1159 {
1160 	ext4_fsblk_t block_to_free = 0;    /* Starting block # of a run */
1161 	unsigned long count = 0;	    /* Number of blocks in the run */
1162 	__le32 *block_to_free_p = NULL;	    /* Pointer into inode/ind
1163 					       corresponding to
1164 					       block_to_free */
1165 	ext4_fsblk_t nr;		    /* Current block # */
1166 	__le32 *p;			    /* Pointer into inode/ind
1167 					       for current block */
1168 	int err = 0;
1169 
1170 	if (this_bh) {				/* For indirect block */
1171 		BUFFER_TRACE(this_bh, "get_write_access");
1172 		err = ext4_journal_get_write_access(handle, this_bh);
1173 		/* Important: if we can't update the indirect pointers
1174 		 * to the blocks, we can't free them. */
1175 		if (err)
1176 			return;
1177 	}
1178 
1179 	for (p = first; p < last; p++) {
1180 		nr = le32_to_cpu(*p);
1181 		if (nr) {
1182 			/* accumulate blocks to free if they're contiguous */
1183 			if (count == 0) {
1184 				block_to_free = nr;
1185 				block_to_free_p = p;
1186 				count = 1;
1187 			} else if (nr == block_to_free + count) {
1188 				count++;
1189 			} else {
1190 				err = ext4_clear_blocks(handle, inode, this_bh,
1191 						        block_to_free, count,
1192 						        block_to_free_p, p);
1193 				if (err)
1194 					break;
1195 				block_to_free = nr;
1196 				block_to_free_p = p;
1197 				count = 1;
1198 			}
1199 		}
1200 	}
1201 
1202 	if (!err && count > 0)
1203 		err = ext4_clear_blocks(handle, inode, this_bh, block_to_free,
1204 					count, block_to_free_p, p);
1205 	if (err < 0)
1206 		/* fatal error */
1207 		return;
1208 
1209 	if (this_bh) {
1210 		BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata");
1211 
1212 		/*
1213 		 * The buffer head should have an attached journal head at this
1214 		 * point. However, if the data is corrupted and an indirect
1215 		 * block pointed to itself, it would have been detached when
1216 		 * the block was cleared. Check for this instead of OOPSing.
1217 		 */
1218 		if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh))
1219 			ext4_handle_dirty_metadata(handle, inode, this_bh);
1220 		else
1221 			EXT4_ERROR_INODE(inode,
1222 					 "circular indirect block detected at "
1223 					 "block %llu",
1224 				(unsigned long long) this_bh->b_blocknr);
1225 	}
1226 }
1227 
1228 /**
1229  *	ext4_free_branches - free an array of branches
1230  *	@handle: JBD handle for this transaction
1231  *	@inode:	inode we are dealing with
1232  *	@parent_bh: the buffer_head which contains *@first and *@last
1233  *	@first:	array of block numbers
1234  *	@last:	pointer immediately past the end of array
1235  *	@depth:	depth of the branches to free
1236  *
1237  *	We are freeing all blocks referred from these branches (numbers are
1238  *	stored as little-endian 32-bit) and updating @inode->i_blocks
1239  *	appropriately.
1240  */
1241 static void ext4_free_branches(handle_t *handle, struct inode *inode,
1242 			       struct buffer_head *parent_bh,
1243 			       __le32 *first, __le32 *last, int depth)
1244 {
1245 	ext4_fsblk_t nr;
1246 	__le32 *p;
1247 
1248 	if (ext4_handle_is_aborted(handle))
1249 		return;
1250 
1251 	if (depth--) {
1252 		struct buffer_head *bh;
1253 		int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb);
1254 		p = last;
1255 		while (--p >= first) {
1256 			nr = le32_to_cpu(*p);
1257 			if (!nr)
1258 				continue;		/* A hole */
1259 
1260 			if (!ext4_data_block_valid(EXT4_SB(inode->i_sb),
1261 						   nr, 1)) {
1262 				EXT4_ERROR_INODE(inode,
1263 						 "invalid indirect mapped "
1264 						 "block %lu (level %d)",
1265 						 (unsigned long) nr, depth);
1266 				break;
1267 			}
1268 
1269 			/* Go read the buffer for the next level down */
1270 			bh = sb_bread(inode->i_sb, nr);
1271 
1272 			/*
1273 			 * A read failure? Report error and clear slot
1274 			 * (should be rare).
1275 			 */
1276 			if (!bh) {
1277 				EXT4_ERROR_INODE_BLOCK(inode, nr,
1278 						       "Read failure");
1279 				continue;
1280 			}
1281 
1282 			/* This zaps the entire block.  Bottom up. */
1283 			BUFFER_TRACE(bh, "free child branches");
1284 			ext4_free_branches(handle, inode, bh,
1285 					(__le32 *) bh->b_data,
1286 					(__le32 *) bh->b_data + addr_per_block,
1287 					depth);
1288 			brelse(bh);
1289 
1290 			/*
1291 			 * Everything below this this pointer has been
1292 			 * released.  Now let this top-of-subtree go.
1293 			 *
1294 			 * We want the freeing of this indirect block to be
1295 			 * atomic in the journal with the updating of the
1296 			 * bitmap block which owns it.  So make some room in
1297 			 * the journal.
1298 			 *
1299 			 * We zero the parent pointer *after* freeing its
1300 			 * pointee in the bitmaps, so if extend_transaction()
1301 			 * for some reason fails to put the bitmap changes and
1302 			 * the release into the same transaction, recovery
1303 			 * will merely complain about releasing a free block,
1304 			 * rather than leaking blocks.
1305 			 */
1306 			if (ext4_handle_is_aborted(handle))
1307 				return;
1308 			if (try_to_extend_transaction(handle, inode)) {
1309 				ext4_mark_inode_dirty(handle, inode);
1310 				ext4_truncate_restart_trans(handle, inode,
1311 					    ext4_blocks_for_truncate(inode));
1312 			}
1313 
1314 			/*
1315 			 * The forget flag here is critical because if
1316 			 * we are journaling (and not doing data
1317 			 * journaling), we have to make sure a revoke
1318 			 * record is written to prevent the journal
1319 			 * replay from overwriting the (former)
1320 			 * indirect block if it gets reallocated as a
1321 			 * data block.  This must happen in the same
1322 			 * transaction where the data blocks are
1323 			 * actually freed.
1324 			 */
1325 			ext4_free_blocks(handle, inode, NULL, nr, 1,
1326 					 EXT4_FREE_BLOCKS_METADATA|
1327 					 EXT4_FREE_BLOCKS_FORGET);
1328 
1329 			if (parent_bh) {
1330 				/*
1331 				 * The block which we have just freed is
1332 				 * pointed to by an indirect block: journal it
1333 				 */
1334 				BUFFER_TRACE(parent_bh, "get_write_access");
1335 				if (!ext4_journal_get_write_access(handle,
1336 								   parent_bh)){
1337 					*p = 0;
1338 					BUFFER_TRACE(parent_bh,
1339 					"call ext4_handle_dirty_metadata");
1340 					ext4_handle_dirty_metadata(handle,
1341 								   inode,
1342 								   parent_bh);
1343 				}
1344 			}
1345 		}
1346 	} else {
1347 		/* We have reached the bottom of the tree. */
1348 		BUFFER_TRACE(parent_bh, "free data blocks");
1349 		ext4_free_data(handle, inode, parent_bh, first, last);
1350 	}
1351 }
1352 
1353 void ext4_ind_truncate(struct inode *inode)
1354 {
1355 	handle_t *handle;
1356 	struct ext4_inode_info *ei = EXT4_I(inode);
1357 	__le32 *i_data = ei->i_data;
1358 	int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb);
1359 	struct address_space *mapping = inode->i_mapping;
1360 	ext4_lblk_t offsets[4];
1361 	Indirect chain[4];
1362 	Indirect *partial;
1363 	__le32 nr = 0;
1364 	int n = 0;
1365 	ext4_lblk_t last_block, max_block;
1366 	loff_t page_len;
1367 	unsigned blocksize = inode->i_sb->s_blocksize;
1368 	int err;
1369 
1370 	handle = start_transaction(inode);
1371 	if (IS_ERR(handle))
1372 		return;		/* AKPM: return what? */
1373 
1374 	last_block = (inode->i_size + blocksize-1)
1375 					>> EXT4_BLOCK_SIZE_BITS(inode->i_sb);
1376 	max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1)
1377 					>> EXT4_BLOCK_SIZE_BITS(inode->i_sb);
1378 
1379 	if (inode->i_size % PAGE_CACHE_SIZE != 0) {
1380 		page_len = PAGE_CACHE_SIZE -
1381 			(inode->i_size & (PAGE_CACHE_SIZE - 1));
1382 
1383 		err = ext4_discard_partial_page_buffers(handle,
1384 			mapping, inode->i_size, page_len, 0);
1385 
1386 		if (err)
1387 			goto out_stop;
1388 	}
1389 
1390 	if (last_block != max_block) {
1391 		n = ext4_block_to_path(inode, last_block, offsets, NULL);
1392 		if (n == 0)
1393 			goto out_stop;	/* error */
1394 	}
1395 
1396 	/*
1397 	 * OK.  This truncate is going to happen.  We add the inode to the
1398 	 * orphan list, so that if this truncate spans multiple transactions,
1399 	 * and we crash, we will resume the truncate when the filesystem
1400 	 * recovers.  It also marks the inode dirty, to catch the new size.
1401 	 *
1402 	 * Implication: the file must always be in a sane, consistent
1403 	 * truncatable state while each transaction commits.
1404 	 */
1405 	if (ext4_orphan_add(handle, inode))
1406 		goto out_stop;
1407 
1408 	/*
1409 	 * From here we block out all ext4_get_block() callers who want to
1410 	 * modify the block allocation tree.
1411 	 */
1412 	down_write(&ei->i_data_sem);
1413 
1414 	ext4_discard_preallocations(inode);
1415 	ext4_es_remove_extent(inode, last_block, EXT_MAX_BLOCKS - last_block);
1416 
1417 	/*
1418 	 * The orphan list entry will now protect us from any crash which
1419 	 * occurs before the truncate completes, so it is now safe to propagate
1420 	 * the new, shorter inode size (held for now in i_size) into the
1421 	 * on-disk inode. We do this via i_disksize, which is the value which
1422 	 * ext4 *really* writes onto the disk inode.
1423 	 */
1424 	ei->i_disksize = inode->i_size;
1425 
1426 	if (last_block == max_block) {
1427 		/*
1428 		 * It is unnecessary to free any data blocks if last_block is
1429 		 * equal to the indirect block limit.
1430 		 */
1431 		goto out_unlock;
1432 	} else if (n == 1) {		/* direct blocks */
1433 		ext4_free_data(handle, inode, NULL, i_data+offsets[0],
1434 			       i_data + EXT4_NDIR_BLOCKS);
1435 		goto do_indirects;
1436 	}
1437 
1438 	partial = ext4_find_shared(inode, n, offsets, chain, &nr);
1439 	/* Kill the top of shared branch (not detached) */
1440 	if (nr) {
1441 		if (partial == chain) {
1442 			/* Shared branch grows from the inode */
1443 			ext4_free_branches(handle, inode, NULL,
1444 					   &nr, &nr+1, (chain+n-1) - partial);
1445 			*partial->p = 0;
1446 			/*
1447 			 * We mark the inode dirty prior to restart,
1448 			 * and prior to stop.  No need for it here.
1449 			 */
1450 		} else {
1451 			/* Shared branch grows from an indirect block */
1452 			BUFFER_TRACE(partial->bh, "get_write_access");
1453 			ext4_free_branches(handle, inode, partial->bh,
1454 					partial->p,
1455 					partial->p+1, (chain+n-1) - partial);
1456 		}
1457 	}
1458 	/* Clear the ends of indirect blocks on the shared branch */
1459 	while (partial > chain) {
1460 		ext4_free_branches(handle, inode, partial->bh, partial->p + 1,
1461 				   (__le32*)partial->bh->b_data+addr_per_block,
1462 				   (chain+n-1) - partial);
1463 		BUFFER_TRACE(partial->bh, "call brelse");
1464 		brelse(partial->bh);
1465 		partial--;
1466 	}
1467 do_indirects:
1468 	/* Kill the remaining (whole) subtrees */
1469 	switch (offsets[0]) {
1470 	default:
1471 		nr = i_data[EXT4_IND_BLOCK];
1472 		if (nr) {
1473 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1);
1474 			i_data[EXT4_IND_BLOCK] = 0;
1475 		}
1476 	case EXT4_IND_BLOCK:
1477 		nr = i_data[EXT4_DIND_BLOCK];
1478 		if (nr) {
1479 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2);
1480 			i_data[EXT4_DIND_BLOCK] = 0;
1481 		}
1482 	case EXT4_DIND_BLOCK:
1483 		nr = i_data[EXT4_TIND_BLOCK];
1484 		if (nr) {
1485 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3);
1486 			i_data[EXT4_TIND_BLOCK] = 0;
1487 		}
1488 	case EXT4_TIND_BLOCK:
1489 		;
1490 	}
1491 
1492 out_unlock:
1493 	up_write(&ei->i_data_sem);
1494 	inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
1495 	ext4_mark_inode_dirty(handle, inode);
1496 
1497 	/*
1498 	 * In a multi-transaction truncate, we only make the final transaction
1499 	 * synchronous
1500 	 */
1501 	if (IS_SYNC(inode))
1502 		ext4_handle_sync(handle);
1503 out_stop:
1504 	/*
1505 	 * If this was a simple ftruncate(), and the file will remain alive
1506 	 * then we need to clear up the orphan record which we created above.
1507 	 * However, if this was a real unlink then we were called by
1508 	 * ext4_delete_inode(), and we allow that function to clean up the
1509 	 * orphan info for us.
1510 	 */
1511 	if (inode->i_nlink)
1512 		ext4_orphan_del(handle, inode);
1513 
1514 	ext4_journal_stop(handle);
1515 	trace_ext4_truncate_exit(inode);
1516 }
1517 
1518