1 // SPDX-License-Identifier: GPL-2.0 2 3 #include <linux/blkdev.h> 4 #include <linux/iversion.h> 5 #include "compression.h" 6 #include "ctree.h" 7 #include "delalloc-space.h" 8 #include "reflink.h" 9 #include "transaction.h" 10 11 #define BTRFS_MAX_DEDUPE_LEN SZ_16M 12 13 static int clone_finish_inode_update(struct btrfs_trans_handle *trans, 14 struct inode *inode, 15 u64 endoff, 16 const u64 destoff, 17 const u64 olen, 18 int no_time_update) 19 { 20 struct btrfs_root *root = BTRFS_I(inode)->root; 21 int ret; 22 23 inode_inc_iversion(inode); 24 if (!no_time_update) 25 inode->i_mtime = inode->i_ctime = current_time(inode); 26 /* 27 * We round up to the block size at eof when determining which 28 * extents to clone above, but shouldn't round up the file size. 29 */ 30 if (endoff > destoff + olen) 31 endoff = destoff + olen; 32 if (endoff > inode->i_size) { 33 i_size_write(inode, endoff); 34 btrfs_inode_safe_disk_i_size_write(BTRFS_I(inode), 0); 35 } 36 37 ret = btrfs_update_inode(trans, root, BTRFS_I(inode)); 38 if (ret) { 39 btrfs_abort_transaction(trans, ret); 40 btrfs_end_transaction(trans); 41 goto out; 42 } 43 ret = btrfs_end_transaction(trans); 44 out: 45 return ret; 46 } 47 48 static int copy_inline_to_page(struct btrfs_inode *inode, 49 const u64 file_offset, 50 char *inline_data, 51 const u64 size, 52 const u64 datal, 53 const u8 comp_type) 54 { 55 const u64 block_size = btrfs_inode_sectorsize(inode); 56 const u64 range_end = file_offset + block_size - 1; 57 const size_t inline_size = size - btrfs_file_extent_calc_inline_size(0); 58 char *data_start = inline_data + btrfs_file_extent_calc_inline_size(0); 59 struct extent_changeset *data_reserved = NULL; 60 struct page *page = NULL; 61 struct address_space *mapping = inode->vfs_inode.i_mapping; 62 int ret; 63 64 ASSERT(IS_ALIGNED(file_offset, block_size)); 65 66 /* 67 * We have flushed and locked the ranges of the source and destination 68 * inodes, we also have locked the inodes, so we are safe to do a 69 * reservation here. Also we must not do the reservation while holding 70 * a transaction open, otherwise we would deadlock. 71 */ 72 ret = btrfs_delalloc_reserve_space(inode, &data_reserved, file_offset, 73 block_size); 74 if (ret) 75 goto out; 76 77 page = find_or_create_page(mapping, file_offset >> PAGE_SHIFT, 78 btrfs_alloc_write_mask(mapping)); 79 if (!page) { 80 ret = -ENOMEM; 81 goto out_unlock; 82 } 83 84 ret = set_page_extent_mapped(page); 85 if (ret < 0) 86 goto out_unlock; 87 88 clear_extent_bit(&inode->io_tree, file_offset, range_end, 89 EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING | EXTENT_DEFRAG, 90 0, 0, NULL); 91 ret = btrfs_set_extent_delalloc(inode, file_offset, range_end, 0, NULL); 92 if (ret) 93 goto out_unlock; 94 95 /* 96 * After dirtying the page our caller will need to start a transaction, 97 * and if we are low on metadata free space, that can cause flushing of 98 * delalloc for all inodes in order to get metadata space released. 99 * However we are holding the range locked for the whole duration of 100 * the clone/dedupe operation, so we may deadlock if that happens and no 101 * other task releases enough space. So mark this inode as not being 102 * possible to flush to avoid such deadlock. We will clear that flag 103 * when we finish cloning all extents, since a transaction is started 104 * after finding each extent to clone. 105 */ 106 set_bit(BTRFS_INODE_NO_DELALLOC_FLUSH, &inode->runtime_flags); 107 108 if (comp_type == BTRFS_COMPRESS_NONE) { 109 char *map; 110 111 map = kmap(page); 112 memcpy(map, data_start, datal); 113 flush_dcache_page(page); 114 kunmap(page); 115 } else { 116 ret = btrfs_decompress(comp_type, data_start, page, 0, 117 inline_size, datal); 118 if (ret) 119 goto out_unlock; 120 flush_dcache_page(page); 121 } 122 123 /* 124 * If our inline data is smaller then the block/page size, then the 125 * remaining of the block/page is equivalent to zeroes. We had something 126 * like the following done: 127 * 128 * $ xfs_io -f -c "pwrite -S 0xab 0 500" file 129 * $ sync # (or fsync) 130 * $ xfs_io -c "falloc 0 4K" file 131 * $ xfs_io -c "pwrite -S 0xcd 4K 4K" 132 * 133 * So what's in the range [500, 4095] corresponds to zeroes. 134 */ 135 if (datal < block_size) { 136 char *map; 137 138 map = kmap(page); 139 memset(map + datal, 0, block_size - datal); 140 flush_dcache_page(page); 141 kunmap(page); 142 } 143 144 SetPageUptodate(page); 145 ClearPageChecked(page); 146 set_page_dirty(page); 147 out_unlock: 148 if (page) { 149 unlock_page(page); 150 put_page(page); 151 } 152 if (ret) 153 btrfs_delalloc_release_space(inode, data_reserved, file_offset, 154 block_size, true); 155 btrfs_delalloc_release_extents(inode, block_size); 156 out: 157 extent_changeset_free(data_reserved); 158 159 return ret; 160 } 161 162 /* 163 * Deal with cloning of inline extents. We try to copy the inline extent from 164 * the source inode to destination inode when possible. When not possible we 165 * copy the inline extent's data into the respective page of the inode. 166 */ 167 static int clone_copy_inline_extent(struct inode *dst, 168 struct btrfs_path *path, 169 struct btrfs_key *new_key, 170 const u64 drop_start, 171 const u64 datal, 172 const u64 size, 173 const u8 comp_type, 174 char *inline_data, 175 struct btrfs_trans_handle **trans_out) 176 { 177 struct btrfs_fs_info *fs_info = btrfs_sb(dst->i_sb); 178 struct btrfs_root *root = BTRFS_I(dst)->root; 179 const u64 aligned_end = ALIGN(new_key->offset + datal, 180 fs_info->sectorsize); 181 struct btrfs_trans_handle *trans = NULL; 182 struct btrfs_drop_extents_args drop_args = { 0 }; 183 int ret; 184 struct btrfs_key key; 185 186 if (new_key->offset > 0) { 187 ret = copy_inline_to_page(BTRFS_I(dst), new_key->offset, 188 inline_data, size, datal, comp_type); 189 goto out; 190 } 191 192 key.objectid = btrfs_ino(BTRFS_I(dst)); 193 key.type = BTRFS_EXTENT_DATA_KEY; 194 key.offset = 0; 195 ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); 196 if (ret < 0) { 197 return ret; 198 } else if (ret > 0) { 199 if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) { 200 ret = btrfs_next_leaf(root, path); 201 if (ret < 0) 202 return ret; 203 else if (ret > 0) 204 goto copy_inline_extent; 205 } 206 btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]); 207 if (key.objectid == btrfs_ino(BTRFS_I(dst)) && 208 key.type == BTRFS_EXTENT_DATA_KEY) { 209 /* 210 * There's an implicit hole at file offset 0, copy the 211 * inline extent's data to the page. 212 */ 213 ASSERT(key.offset > 0); 214 ret = copy_inline_to_page(BTRFS_I(dst), new_key->offset, 215 inline_data, size, datal, 216 comp_type); 217 goto out; 218 } 219 } else if (i_size_read(dst) <= datal) { 220 struct btrfs_file_extent_item *ei; 221 222 ei = btrfs_item_ptr(path->nodes[0], path->slots[0], 223 struct btrfs_file_extent_item); 224 /* 225 * If it's an inline extent replace it with the source inline 226 * extent, otherwise copy the source inline extent data into 227 * the respective page at the destination inode. 228 */ 229 if (btrfs_file_extent_type(path->nodes[0], ei) == 230 BTRFS_FILE_EXTENT_INLINE) 231 goto copy_inline_extent; 232 233 ret = copy_inline_to_page(BTRFS_I(dst), new_key->offset, 234 inline_data, size, datal, comp_type); 235 goto out; 236 } 237 238 copy_inline_extent: 239 ret = 0; 240 /* 241 * We have no extent items, or we have an extent at offset 0 which may 242 * or may not be inlined. All these cases are dealt the same way. 243 */ 244 if (i_size_read(dst) > datal) { 245 /* 246 * At the destination offset 0 we have either a hole, a regular 247 * extent or an inline extent larger then the one we want to 248 * clone. Deal with all these cases by copying the inline extent 249 * data into the respective page at the destination inode. 250 */ 251 ret = copy_inline_to_page(BTRFS_I(dst), new_key->offset, 252 inline_data, size, datal, comp_type); 253 goto out; 254 } 255 256 btrfs_release_path(path); 257 /* 258 * If we end up here it means were copy the inline extent into a leaf 259 * of the destination inode. We know we will drop or adjust at most one 260 * extent item in the destination root. 261 * 262 * 1 unit - adjusting old extent (we may have to split it) 263 * 1 unit - add new extent 264 * 1 unit - inode update 265 */ 266 trans = btrfs_start_transaction(root, 3); 267 if (IS_ERR(trans)) { 268 ret = PTR_ERR(trans); 269 trans = NULL; 270 goto out; 271 } 272 drop_args.path = path; 273 drop_args.start = drop_start; 274 drop_args.end = aligned_end; 275 drop_args.drop_cache = true; 276 ret = btrfs_drop_extents(trans, root, BTRFS_I(dst), &drop_args); 277 if (ret) 278 goto out; 279 ret = btrfs_insert_empty_item(trans, root, path, new_key, size); 280 if (ret) 281 goto out; 282 283 write_extent_buffer(path->nodes[0], inline_data, 284 btrfs_item_ptr_offset(path->nodes[0], 285 path->slots[0]), 286 size); 287 btrfs_update_inode_bytes(BTRFS_I(dst), datal, drop_args.bytes_found); 288 set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &BTRFS_I(dst)->runtime_flags); 289 ret = btrfs_inode_set_file_extent_range(BTRFS_I(dst), 0, aligned_end); 290 out: 291 if (!ret && !trans) { 292 /* 293 * No transaction here means we copied the inline extent into a 294 * page of the destination inode. 295 * 296 * 1 unit to update inode item 297 */ 298 trans = btrfs_start_transaction(root, 1); 299 if (IS_ERR(trans)) { 300 ret = PTR_ERR(trans); 301 trans = NULL; 302 } 303 } 304 if (ret && trans) { 305 btrfs_abort_transaction(trans, ret); 306 btrfs_end_transaction(trans); 307 } 308 if (!ret) 309 *trans_out = trans; 310 311 return ret; 312 } 313 314 /** 315 * btrfs_clone() - clone a range from inode file to another 316 * 317 * @src: Inode to clone from 318 * @inode: Inode to clone to 319 * @off: Offset within source to start clone from 320 * @olen: Original length, passed by user, of range to clone 321 * @olen_aligned: Block-aligned value of olen 322 * @destoff: Offset within @inode to start clone 323 * @no_time_update: Whether to update mtime/ctime on the target inode 324 */ 325 static int btrfs_clone(struct inode *src, struct inode *inode, 326 const u64 off, const u64 olen, const u64 olen_aligned, 327 const u64 destoff, int no_time_update) 328 { 329 struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb); 330 struct btrfs_path *path = NULL; 331 struct extent_buffer *leaf; 332 struct btrfs_trans_handle *trans; 333 char *buf = NULL; 334 struct btrfs_key key; 335 u32 nritems; 336 int slot; 337 int ret; 338 const u64 len = olen_aligned; 339 u64 last_dest_end = destoff; 340 341 ret = -ENOMEM; 342 buf = kvmalloc(fs_info->nodesize, GFP_KERNEL); 343 if (!buf) 344 return ret; 345 346 path = btrfs_alloc_path(); 347 if (!path) { 348 kvfree(buf); 349 return ret; 350 } 351 352 path->reada = READA_FORWARD; 353 /* Clone data */ 354 key.objectid = btrfs_ino(BTRFS_I(src)); 355 key.type = BTRFS_EXTENT_DATA_KEY; 356 key.offset = off; 357 358 while (1) { 359 u64 next_key_min_offset = key.offset + 1; 360 struct btrfs_file_extent_item *extent; 361 u64 extent_gen; 362 int type; 363 u32 size; 364 struct btrfs_key new_key; 365 u64 disko = 0, diskl = 0; 366 u64 datao = 0, datal = 0; 367 u8 comp; 368 u64 drop_start; 369 370 /* Note the key will change type as we walk through the tree */ 371 ret = btrfs_search_slot(NULL, BTRFS_I(src)->root, &key, path, 372 0, 0); 373 if (ret < 0) 374 goto out; 375 /* 376 * First search, if no extent item that starts at offset off was 377 * found but the previous item is an extent item, it's possible 378 * it might overlap our target range, therefore process it. 379 */ 380 if (key.offset == off && ret > 0 && path->slots[0] > 0) { 381 btrfs_item_key_to_cpu(path->nodes[0], &key, 382 path->slots[0] - 1); 383 if (key.type == BTRFS_EXTENT_DATA_KEY) 384 path->slots[0]--; 385 } 386 387 nritems = btrfs_header_nritems(path->nodes[0]); 388 process_slot: 389 if (path->slots[0] >= nritems) { 390 ret = btrfs_next_leaf(BTRFS_I(src)->root, path); 391 if (ret < 0) 392 goto out; 393 if (ret > 0) 394 break; 395 nritems = btrfs_header_nritems(path->nodes[0]); 396 } 397 leaf = path->nodes[0]; 398 slot = path->slots[0]; 399 400 btrfs_item_key_to_cpu(leaf, &key, slot); 401 if (key.type > BTRFS_EXTENT_DATA_KEY || 402 key.objectid != btrfs_ino(BTRFS_I(src))) 403 break; 404 405 ASSERT(key.type == BTRFS_EXTENT_DATA_KEY); 406 407 extent = btrfs_item_ptr(leaf, slot, 408 struct btrfs_file_extent_item); 409 extent_gen = btrfs_file_extent_generation(leaf, extent); 410 comp = btrfs_file_extent_compression(leaf, extent); 411 type = btrfs_file_extent_type(leaf, extent); 412 if (type == BTRFS_FILE_EXTENT_REG || 413 type == BTRFS_FILE_EXTENT_PREALLOC) { 414 disko = btrfs_file_extent_disk_bytenr(leaf, extent); 415 diskl = btrfs_file_extent_disk_num_bytes(leaf, extent); 416 datao = btrfs_file_extent_offset(leaf, extent); 417 datal = btrfs_file_extent_num_bytes(leaf, extent); 418 } else if (type == BTRFS_FILE_EXTENT_INLINE) { 419 /* Take upper bound, may be compressed */ 420 datal = btrfs_file_extent_ram_bytes(leaf, extent); 421 } 422 423 /* 424 * The first search might have left us at an extent item that 425 * ends before our target range's start, can happen if we have 426 * holes and NO_HOLES feature enabled. 427 */ 428 if (key.offset + datal <= off) { 429 path->slots[0]++; 430 goto process_slot; 431 } else if (key.offset >= off + len) { 432 break; 433 } 434 next_key_min_offset = key.offset + datal; 435 size = btrfs_item_size_nr(leaf, slot); 436 read_extent_buffer(leaf, buf, btrfs_item_ptr_offset(leaf, slot), 437 size); 438 439 btrfs_release_path(path); 440 441 memcpy(&new_key, &key, sizeof(new_key)); 442 new_key.objectid = btrfs_ino(BTRFS_I(inode)); 443 if (off <= key.offset) 444 new_key.offset = key.offset + destoff - off; 445 else 446 new_key.offset = destoff; 447 448 /* 449 * Deal with a hole that doesn't have an extent item that 450 * represents it (NO_HOLES feature enabled). 451 * This hole is either in the middle of the cloning range or at 452 * the beginning (fully overlaps it or partially overlaps it). 453 */ 454 if (new_key.offset != last_dest_end) 455 drop_start = last_dest_end; 456 else 457 drop_start = new_key.offset; 458 459 if (type == BTRFS_FILE_EXTENT_REG || 460 type == BTRFS_FILE_EXTENT_PREALLOC) { 461 struct btrfs_replace_extent_info clone_info; 462 463 /* 464 * a | --- range to clone ---| b 465 * | ------------- extent ------------- | 466 */ 467 468 /* Subtract range b */ 469 if (key.offset + datal > off + len) 470 datal = off + len - key.offset; 471 472 /* Subtract range a */ 473 if (off > key.offset) { 474 datao += off - key.offset; 475 datal -= off - key.offset; 476 } 477 478 clone_info.disk_offset = disko; 479 clone_info.disk_len = diskl; 480 clone_info.data_offset = datao; 481 clone_info.data_len = datal; 482 clone_info.file_offset = new_key.offset; 483 clone_info.extent_buf = buf; 484 clone_info.is_new_extent = false; 485 ret = btrfs_replace_file_extents(inode, path, drop_start, 486 new_key.offset + datal - 1, &clone_info, 487 &trans); 488 if (ret) 489 goto out; 490 } else if (type == BTRFS_FILE_EXTENT_INLINE) { 491 /* 492 * Inline extents always have to start at file offset 0 493 * and can never be bigger then the sector size. We can 494 * never clone only parts of an inline extent, since all 495 * reflink operations must start at a sector size aligned 496 * offset, and the length must be aligned too or end at 497 * the i_size (which implies the whole inlined data). 498 */ 499 ASSERT(key.offset == 0); 500 ASSERT(datal <= fs_info->sectorsize); 501 if (key.offset != 0 || datal > fs_info->sectorsize) 502 return -EUCLEAN; 503 504 ret = clone_copy_inline_extent(inode, path, &new_key, 505 drop_start, datal, size, 506 comp, buf, &trans); 507 if (ret) 508 goto out; 509 } 510 511 btrfs_release_path(path); 512 513 /* 514 * If this is a new extent update the last_reflink_trans of both 515 * inodes. This is used by fsync to make sure it does not log 516 * multiple checksum items with overlapping ranges. For older 517 * extents we don't need to do it since inode logging skips the 518 * checksums for older extents. Also ignore holes and inline 519 * extents because they don't have checksums in the csum tree. 520 */ 521 if (extent_gen == trans->transid && disko > 0) { 522 BTRFS_I(src)->last_reflink_trans = trans->transid; 523 BTRFS_I(inode)->last_reflink_trans = trans->transid; 524 } 525 526 last_dest_end = ALIGN(new_key.offset + datal, 527 fs_info->sectorsize); 528 ret = clone_finish_inode_update(trans, inode, last_dest_end, 529 destoff, olen, no_time_update); 530 if (ret) 531 goto out; 532 if (new_key.offset + datal >= destoff + len) 533 break; 534 535 btrfs_release_path(path); 536 key.offset = next_key_min_offset; 537 538 if (fatal_signal_pending(current)) { 539 ret = -EINTR; 540 goto out; 541 } 542 543 cond_resched(); 544 } 545 ret = 0; 546 547 if (last_dest_end < destoff + len) { 548 /* 549 * We have an implicit hole that fully or partially overlaps our 550 * cloning range at its end. This means that we either have the 551 * NO_HOLES feature enabled or the implicit hole happened due to 552 * mixing buffered and direct IO writes against this file. 553 */ 554 btrfs_release_path(path); 555 556 ret = btrfs_replace_file_extents(inode, path, last_dest_end, 557 destoff + len - 1, NULL, &trans); 558 if (ret) 559 goto out; 560 561 ret = clone_finish_inode_update(trans, inode, destoff + len, 562 destoff, olen, no_time_update); 563 } 564 565 out: 566 btrfs_free_path(path); 567 kvfree(buf); 568 clear_bit(BTRFS_INODE_NO_DELALLOC_FLUSH, &BTRFS_I(inode)->runtime_flags); 569 570 return ret; 571 } 572 573 static void btrfs_double_extent_unlock(struct inode *inode1, u64 loff1, 574 struct inode *inode2, u64 loff2, u64 len) 575 { 576 unlock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1); 577 unlock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1); 578 } 579 580 static void btrfs_double_extent_lock(struct inode *inode1, u64 loff1, 581 struct inode *inode2, u64 loff2, u64 len) 582 { 583 if (inode1 < inode2) { 584 swap(inode1, inode2); 585 swap(loff1, loff2); 586 } else if (inode1 == inode2 && loff2 < loff1) { 587 swap(loff1, loff2); 588 } 589 lock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1); 590 lock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1); 591 } 592 593 static int btrfs_extent_same_range(struct inode *src, u64 loff, u64 len, 594 struct inode *dst, u64 dst_loff) 595 { 596 const u64 bs = BTRFS_I(src)->root->fs_info->sb->s_blocksize; 597 int ret; 598 599 /* 600 * Lock destination range to serialize with concurrent readpages() and 601 * source range to serialize with relocation. 602 */ 603 btrfs_double_extent_lock(src, loff, dst, dst_loff, len); 604 ret = btrfs_clone(src, dst, loff, len, ALIGN(len, bs), dst_loff, 1); 605 btrfs_double_extent_unlock(src, loff, dst, dst_loff, len); 606 607 return ret; 608 } 609 610 static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen, 611 struct inode *dst, u64 dst_loff) 612 { 613 int ret; 614 u64 i, tail_len, chunk_count; 615 struct btrfs_root *root_dst = BTRFS_I(dst)->root; 616 617 spin_lock(&root_dst->root_item_lock); 618 if (root_dst->send_in_progress) { 619 btrfs_warn_rl(root_dst->fs_info, 620 "cannot deduplicate to root %llu while send operations are using it (%d in progress)", 621 root_dst->root_key.objectid, 622 root_dst->send_in_progress); 623 spin_unlock(&root_dst->root_item_lock); 624 return -EAGAIN; 625 } 626 root_dst->dedupe_in_progress++; 627 spin_unlock(&root_dst->root_item_lock); 628 629 tail_len = olen % BTRFS_MAX_DEDUPE_LEN; 630 chunk_count = div_u64(olen, BTRFS_MAX_DEDUPE_LEN); 631 632 for (i = 0; i < chunk_count; i++) { 633 ret = btrfs_extent_same_range(src, loff, BTRFS_MAX_DEDUPE_LEN, 634 dst, dst_loff); 635 if (ret) 636 goto out; 637 638 loff += BTRFS_MAX_DEDUPE_LEN; 639 dst_loff += BTRFS_MAX_DEDUPE_LEN; 640 } 641 642 if (tail_len > 0) 643 ret = btrfs_extent_same_range(src, loff, tail_len, dst, dst_loff); 644 out: 645 spin_lock(&root_dst->root_item_lock); 646 root_dst->dedupe_in_progress--; 647 spin_unlock(&root_dst->root_item_lock); 648 649 return ret; 650 } 651 652 static noinline int btrfs_clone_files(struct file *file, struct file *file_src, 653 u64 off, u64 olen, u64 destoff) 654 { 655 struct inode *inode = file_inode(file); 656 struct inode *src = file_inode(file_src); 657 struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb); 658 int ret; 659 int wb_ret; 660 u64 len = olen; 661 u64 bs = fs_info->sb->s_blocksize; 662 663 /* 664 * VFS's generic_remap_file_range_prep() protects us from cloning the 665 * eof block into the middle of a file, which would result in corruption 666 * if the file size is not blocksize aligned. So we don't need to check 667 * for that case here. 668 */ 669 if (off + len == src->i_size) 670 len = ALIGN(src->i_size, bs) - off; 671 672 if (destoff > inode->i_size) { 673 const u64 wb_start = ALIGN_DOWN(inode->i_size, bs); 674 675 ret = btrfs_cont_expand(BTRFS_I(inode), inode->i_size, destoff); 676 if (ret) 677 return ret; 678 /* 679 * We may have truncated the last block if the inode's size is 680 * not sector size aligned, so we need to wait for writeback to 681 * complete before proceeding further, otherwise we can race 682 * with cloning and attempt to increment a reference to an 683 * extent that no longer exists (writeback completed right after 684 * we found the previous extent covering eof and before we 685 * attempted to increment its reference count). 686 */ 687 ret = btrfs_wait_ordered_range(inode, wb_start, 688 destoff - wb_start); 689 if (ret) 690 return ret; 691 } 692 693 /* 694 * Lock destination range to serialize with concurrent readpages() and 695 * source range to serialize with relocation. 696 */ 697 btrfs_double_extent_lock(src, off, inode, destoff, len); 698 ret = btrfs_clone(src, inode, off, olen, len, destoff, 0); 699 btrfs_double_extent_unlock(src, off, inode, destoff, len); 700 701 /* 702 * We may have copied an inline extent into a page of the destination 703 * range, so wait for writeback to complete before truncating pages 704 * from the page cache. This is a rare case. 705 */ 706 wb_ret = btrfs_wait_ordered_range(inode, destoff, len); 707 ret = ret ? ret : wb_ret; 708 /* 709 * Truncate page cache pages so that future reads will see the cloned 710 * data immediately and not the previous data. 711 */ 712 truncate_inode_pages_range(&inode->i_data, 713 round_down(destoff, PAGE_SIZE), 714 round_up(destoff + len, PAGE_SIZE) - 1); 715 716 return ret; 717 } 718 719 static int btrfs_remap_file_range_prep(struct file *file_in, loff_t pos_in, 720 struct file *file_out, loff_t pos_out, 721 loff_t *len, unsigned int remap_flags) 722 { 723 struct inode *inode_in = file_inode(file_in); 724 struct inode *inode_out = file_inode(file_out); 725 u64 bs = BTRFS_I(inode_out)->root->fs_info->sb->s_blocksize; 726 bool same_inode = inode_out == inode_in; 727 u64 wb_len; 728 int ret; 729 730 if (!(remap_flags & REMAP_FILE_DEDUP)) { 731 struct btrfs_root *root_out = BTRFS_I(inode_out)->root; 732 733 if (btrfs_root_readonly(root_out)) 734 return -EROFS; 735 736 if (file_in->f_path.mnt != file_out->f_path.mnt || 737 inode_in->i_sb != inode_out->i_sb) 738 return -EXDEV; 739 } 740 741 /* Don't make the dst file partly checksummed */ 742 if ((BTRFS_I(inode_in)->flags & BTRFS_INODE_NODATASUM) != 743 (BTRFS_I(inode_out)->flags & BTRFS_INODE_NODATASUM)) { 744 return -EINVAL; 745 } 746 747 /* 748 * Now that the inodes are locked, we need to start writeback ourselves 749 * and can not rely on the writeback from the VFS's generic helper 750 * generic_remap_file_range_prep() because: 751 * 752 * 1) For compression we must call filemap_fdatawrite_range() range 753 * twice (btrfs_fdatawrite_range() does it for us), and the generic 754 * helper only calls it once; 755 * 756 * 2) filemap_fdatawrite_range(), called by the generic helper only 757 * waits for the writeback to complete, i.e. for IO to be done, and 758 * not for the ordered extents to complete. We need to wait for them 759 * to complete so that new file extent items are in the fs tree. 760 */ 761 if (*len == 0 && !(remap_flags & REMAP_FILE_DEDUP)) 762 wb_len = ALIGN(inode_in->i_size, bs) - ALIGN_DOWN(pos_in, bs); 763 else 764 wb_len = ALIGN(*len, bs); 765 766 /* 767 * Since we don't lock ranges, wait for ongoing lockless dio writes (as 768 * any in progress could create its ordered extents after we wait for 769 * existing ordered extents below). 770 */ 771 inode_dio_wait(inode_in); 772 if (!same_inode) 773 inode_dio_wait(inode_out); 774 775 /* 776 * Workaround to make sure NOCOW buffered write reach disk as NOCOW. 777 * 778 * Btrfs' back references do not have a block level granularity, they 779 * work at the whole extent level. 780 * NOCOW buffered write without data space reserved may not be able 781 * to fall back to CoW due to lack of data space, thus could cause 782 * data loss. 783 * 784 * Here we take a shortcut by flushing the whole inode, so that all 785 * nocow write should reach disk as nocow before we increase the 786 * reference of the extent. We could do better by only flushing NOCOW 787 * data, but that needs extra accounting. 788 * 789 * Also we don't need to check ASYNC_EXTENT, as async extent will be 790 * CoWed anyway, not affecting nocow part. 791 */ 792 ret = filemap_flush(inode_in->i_mapping); 793 if (ret < 0) 794 return ret; 795 796 ret = btrfs_wait_ordered_range(inode_in, ALIGN_DOWN(pos_in, bs), 797 wb_len); 798 if (ret < 0) 799 return ret; 800 ret = btrfs_wait_ordered_range(inode_out, ALIGN_DOWN(pos_out, bs), 801 wb_len); 802 if (ret < 0) 803 return ret; 804 805 return generic_remap_file_range_prep(file_in, pos_in, file_out, pos_out, 806 len, remap_flags); 807 } 808 809 loff_t btrfs_remap_file_range(struct file *src_file, loff_t off, 810 struct file *dst_file, loff_t destoff, loff_t len, 811 unsigned int remap_flags) 812 { 813 struct inode *src_inode = file_inode(src_file); 814 struct inode *dst_inode = file_inode(dst_file); 815 bool same_inode = dst_inode == src_inode; 816 int ret; 817 818 if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY)) 819 return -EINVAL; 820 821 if (same_inode) 822 inode_lock(src_inode); 823 else 824 lock_two_nondirectories(src_inode, dst_inode); 825 826 ret = btrfs_remap_file_range_prep(src_file, off, dst_file, destoff, 827 &len, remap_flags); 828 if (ret < 0 || len == 0) 829 goto out_unlock; 830 831 if (remap_flags & REMAP_FILE_DEDUP) 832 ret = btrfs_extent_same(src_inode, off, len, dst_inode, destoff); 833 else 834 ret = btrfs_clone_files(dst_file, src_file, off, len, destoff); 835 836 out_unlock: 837 if (same_inode) 838 inode_unlock(src_inode); 839 else 840 unlock_two_nondirectories(src_inode, dst_inode); 841 842 return ret < 0 ? ret : len; 843 } 844