1menu "Xen driver support" 2 depends on XEN 3 4config XEN_BALLOON 5 bool "Xen memory balloon driver" 6 default y 7 help 8 The balloon driver allows the Xen domain to request more memory from 9 the system to expand the domain's memory allocation, or alternatively 10 return unneeded memory to the system. 11 12config XEN_SELFBALLOONING 13 bool "Dynamically self-balloon kernel memory to target" 14 depends on XEN && XEN_BALLOON && CLEANCACHE && SWAP && XEN_TMEM 15 default n 16 help 17 Self-ballooning dynamically balloons available kernel memory driven 18 by the current usage of anonymous memory ("committed AS") and 19 controlled by various sysfs-settable parameters. Configuring 20 FRONTSWAP is highly recommended; if it is not configured, self- 21 ballooning is disabled by default. If FRONTSWAP is configured, 22 frontswap-selfshrinking is enabled by default but can be disabled 23 with the 'tmem.selfshrink=0' kernel boot parameter; and self-ballooning 24 is enabled by default but can be disabled with the 'tmem.selfballooning=0' 25 kernel boot parameter. Note that systems without a sufficiently 26 large swap device should not enable self-ballooning. 27 28config XEN_BALLOON_MEMORY_HOTPLUG 29 bool "Memory hotplug support for Xen balloon driver" 30 default n 31 depends on XEN_BALLOON && MEMORY_HOTPLUG 32 help 33 Memory hotplug support for Xen balloon driver allows expanding memory 34 available for the system above limit declared at system startup. 35 It is very useful on critical systems which require long 36 run without rebooting. 37 38 Memory could be hotplugged in following steps: 39 40 1) dom0: xl mem-max <domU> <maxmem> 41 where <maxmem> is >= requested memory size, 42 43 2) dom0: xl mem-set <domU> <memory> 44 where <memory> is requested memory size; alternatively memory 45 could be added by writing proper value to 46 /sys/devices/system/xen_memory/xen_memory0/target or 47 /sys/devices/system/xen_memory/xen_memory0/target_kb on dumU, 48 49 3) domU: for i in /sys/devices/system/memory/memory*/state; do \ 50 [ "`cat "$i"`" = offline ] && echo online > "$i"; done 51 52 Memory could be onlined automatically on domU by adding following line to udev rules: 53 54 SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'" 55 56 In that case step 3 should be omitted. 57 58config XEN_SCRUB_PAGES 59 bool "Scrub pages before returning them to system" 60 depends on XEN_BALLOON 61 default y 62 help 63 Scrub pages before returning them to the system for reuse by 64 other domains. This makes sure that any confidential data 65 is not accidentally visible to other domains. Is it more 66 secure, but slightly less efficient. 67 If in doubt, say yes. 68 69config XEN_DEV_EVTCHN 70 tristate "Xen /dev/xen/evtchn device" 71 default y 72 help 73 The evtchn driver allows a userspace process to trigger event 74 channels and to receive notification of an event channel 75 firing. 76 If in doubt, say yes. 77 78config XEN_BACKEND 79 bool "Backend driver support" 80 depends on XEN_DOM0 81 default y 82 help 83 Support for backend device drivers that provide I/O services 84 to other virtual machines. 85 86config XENFS 87 tristate "Xen filesystem" 88 select XEN_PRIVCMD 89 default y 90 help 91 The xen filesystem provides a way for domains to share 92 information with each other and with the hypervisor. 93 For example, by reading and writing the "xenbus" file, guests 94 may pass arbitrary information to the initial domain. 95 If in doubt, say yes. 96 97config XEN_COMPAT_XENFS 98 bool "Create compatibility mount point /proc/xen" 99 depends on XENFS 100 default y 101 help 102 The old xenstore userspace tools expect to find "xenbus" 103 under /proc/xen, but "xenbus" is now found at the root of the 104 xenfs filesystem. Selecting this causes the kernel to create 105 the compatibility mount point /proc/xen if it is running on 106 a xen platform. 107 If in doubt, say yes. 108 109config XEN_SYS_HYPERVISOR 110 bool "Create xen entries under /sys/hypervisor" 111 depends on SYSFS 112 select SYS_HYPERVISOR 113 default y 114 help 115 Create entries under /sys/hypervisor describing the Xen 116 hypervisor environment. When running native or in another 117 virtual environment, /sys/hypervisor will still be present, 118 but will have no xen contents. 119 120config XEN_XENBUS_FRONTEND 121 tristate 122 123config XEN_GNTDEV 124 tristate "userspace grant access device driver" 125 depends on XEN 126 default m 127 select MMU_NOTIFIER 128 help 129 Allows userspace processes to use grants. 130 131config XEN_GRANT_DEV_ALLOC 132 tristate "User-space grant reference allocator driver" 133 depends on XEN 134 default m 135 help 136 Allows userspace processes to create pages with access granted 137 to other domains. This can be used to implement frontend drivers 138 or as part of an inter-domain shared memory channel. 139 140config SWIOTLB_XEN 141 def_bool y 142 select SWIOTLB 143 144config XEN_TMEM 145 tristate 146 depends on !ARM && !ARM64 147 default m if (CLEANCACHE || FRONTSWAP) 148 help 149 Shim to interface in-kernel Transcendent Memory hooks 150 (e.g. cleancache and frontswap) to Xen tmem hypercalls. 151 152config XEN_PCIDEV_BACKEND 153 tristate "Xen PCI-device backend driver" 154 depends on PCI && X86 && XEN 155 depends on XEN_BACKEND 156 default m 157 help 158 The PCI device backend driver allows the kernel to export arbitrary 159 PCI devices to other guests. If you select this to be a module, you 160 will need to make sure no other driver has bound to the device(s) 161 you want to make visible to other guests. 162 163 The parameter "passthrough" allows you specify how you want the PCI 164 devices to appear in the guest. You can choose the default (0) where 165 PCI topology starts at 00.00.0, or (1) for passthrough if you want 166 the PCI devices topology appear the same as in the host. 167 168 The "hide" parameter (only applicable if backend driver is compiled 169 into the kernel) allows you to bind the PCI devices to this module 170 from the default device drivers. The argument is the list of PCI BDFs: 171 xen-pciback.hide=(03:00.0)(04:00.0) 172 173 If in doubt, say m. 174 175config XEN_SCSI_BACKEND 176 tristate "XEN SCSI backend driver" 177 depends on XEN && XEN_BACKEND && TARGET_CORE 178 help 179 The SCSI backend driver allows the kernel to export its SCSI Devices 180 to other guests via a high-performance shared-memory interface. 181 Only needed for systems running as XEN driver domains (e.g. Dom0) and 182 if guests need generic access to SCSI devices. 183 184config XEN_PRIVCMD 185 tristate 186 depends on XEN 187 default m 188 189config XEN_STUB 190 bool "Xen stub drivers" 191 depends on XEN && X86_64 && BROKEN 192 default n 193 help 194 Allow kernel to install stub drivers, to reserve space for Xen drivers, 195 i.e. memory hotplug and cpu hotplug, and to block native drivers loaded, 196 so that real Xen drivers can be modular. 197 198 To enable Xen features like cpu and memory hotplug, select Y here. 199 200config XEN_ACPI_HOTPLUG_MEMORY 201 tristate "Xen ACPI memory hotplug" 202 depends on XEN_DOM0 && XEN_STUB && ACPI 203 default n 204 help 205 This is Xen ACPI memory hotplug. 206 207 Currently Xen only support ACPI memory hot-add. If you want 208 to hot-add memory at runtime (the hot-added memory cannot be 209 removed until machine stop), select Y/M here, otherwise select N. 210 211config XEN_ACPI_HOTPLUG_CPU 212 tristate "Xen ACPI cpu hotplug" 213 depends on XEN_DOM0 && XEN_STUB && ACPI 214 select ACPI_CONTAINER 215 default n 216 help 217 Xen ACPI cpu enumerating and hotplugging 218 219 For hotplugging, currently Xen only support ACPI cpu hotadd. 220 If you want to hotadd cpu at runtime (the hotadded cpu cannot 221 be removed until machine stop), select Y/M here. 222 223config XEN_ACPI_PROCESSOR 224 tristate "Xen ACPI processor" 225 depends on XEN && X86 && ACPI_PROCESSOR && CPU_FREQ 226 default m 227 help 228 This ACPI processor uploads Power Management information to the Xen 229 hypervisor. 230 231 To do that the driver parses the Power Management data and uploads 232 said information to the Xen hypervisor. Then the Xen hypervisor can 233 select the proper Cx and Pxx states. It also registers itself as the 234 SMM so that other drivers (such as ACPI cpufreq scaling driver) will 235 not load. 236 237 To compile this driver as a module, choose M here: the module will be 238 called xen_acpi_processor If you do not know what to choose, select 239 M here. If the CPUFREQ drivers are built in, select Y here. 240 241config XEN_MCE_LOG 242 bool "Xen platform mcelog" 243 depends on XEN_DOM0 && X86_64 && X86_MCE 244 default n 245 help 246 Allow kernel fetching MCE error from Xen platform and 247 converting it into Linux mcelog format for mcelog tools 248 249config XEN_HAVE_PVMMU 250 bool 251 252config XEN_EFI 253 def_bool y 254 depends on X86_64 && EFI 255 256endmenu 257