1menu "Xen driver support" 2 depends on XEN 3 4config XEN_BALLOON 5 bool "Xen memory balloon driver" 6 depends on !ARM 7 default y 8 help 9 The balloon driver allows the Xen domain to request more memory from 10 the system to expand the domain's memory allocation, or alternatively 11 return unneeded memory to the system. 12 13config XEN_SELFBALLOONING 14 bool "Dynamically self-balloon kernel memory to target" 15 depends on XEN && XEN_BALLOON && CLEANCACHE && SWAP && XEN_TMEM 16 default n 17 help 18 Self-ballooning dynamically balloons available kernel memory driven 19 by the current usage of anonymous memory ("committed AS") and 20 controlled by various sysfs-settable parameters. Configuring 21 FRONTSWAP is highly recommended; if it is not configured, self- 22 ballooning is disabled by default but can be enabled with the 23 'selfballooning' kernel boot parameter. If FRONTSWAP is configured, 24 frontswap-selfshrinking is enabled by default but can be disabled 25 with the 'noselfshrink' kernel boot parameter; and self-ballooning 26 is enabled by default but can be disabled with the 'noselfballooning' 27 kernel boot parameter. Note that systems without a sufficiently 28 large swap device should not enable self-ballooning. 29 30config XEN_BALLOON_MEMORY_HOTPLUG 31 bool "Memory hotplug support for Xen balloon driver" 32 default n 33 depends on XEN_BALLOON && MEMORY_HOTPLUG 34 help 35 Memory hotplug support for Xen balloon driver allows expanding memory 36 available for the system above limit declared at system startup. 37 It is very useful on critical systems which require long 38 run without rebooting. 39 40 Memory could be hotplugged in following steps: 41 42 1) dom0: xl mem-max <domU> <maxmem> 43 where <maxmem> is >= requested memory size, 44 45 2) dom0: xl mem-set <domU> <memory> 46 where <memory> is requested memory size; alternatively memory 47 could be added by writing proper value to 48 /sys/devices/system/xen_memory/xen_memory0/target or 49 /sys/devices/system/xen_memory/xen_memory0/target_kb on dumU, 50 51 3) domU: for i in /sys/devices/system/memory/memory*/state; do \ 52 [ "`cat "$i"`" = offline ] && echo online > "$i"; done 53 54 Memory could be onlined automatically on domU by adding following line to udev rules: 55 56 SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'" 57 58 In that case step 3 should be omitted. 59 60config XEN_SCRUB_PAGES 61 bool "Scrub pages before returning them to system" 62 depends on XEN_BALLOON 63 default y 64 help 65 Scrub pages before returning them to the system for reuse by 66 other domains. This makes sure that any confidential data 67 is not accidentally visible to other domains. Is it more 68 secure, but slightly less efficient. 69 If in doubt, say yes. 70 71config XEN_DEV_EVTCHN 72 tristate "Xen /dev/xen/evtchn device" 73 default y 74 help 75 The evtchn driver allows a userspace process to trigger event 76 channels and to receive notification of an event channel 77 firing. 78 If in doubt, say yes. 79 80config XEN_BACKEND 81 bool "Backend driver support" 82 depends on XEN_DOM0 83 default y 84 help 85 Support for backend device drivers that provide I/O services 86 to other virtual machines. 87 88config XENFS 89 tristate "Xen filesystem" 90 select XEN_PRIVCMD 91 default y 92 help 93 The xen filesystem provides a way for domains to share 94 information with each other and with the hypervisor. 95 For example, by reading and writing the "xenbus" file, guests 96 may pass arbitrary information to the initial domain. 97 If in doubt, say yes. 98 99config XEN_COMPAT_XENFS 100 bool "Create compatibility mount point /proc/xen" 101 depends on XENFS 102 default y 103 help 104 The old xenstore userspace tools expect to find "xenbus" 105 under /proc/xen, but "xenbus" is now found at the root of the 106 xenfs filesystem. Selecting this causes the kernel to create 107 the compatibility mount point /proc/xen if it is running on 108 a xen platform. 109 If in doubt, say yes. 110 111config XEN_SYS_HYPERVISOR 112 bool "Create xen entries under /sys/hypervisor" 113 depends on SYSFS 114 select SYS_HYPERVISOR 115 default y 116 help 117 Create entries under /sys/hypervisor describing the Xen 118 hypervisor environment. When running native or in another 119 virtual environment, /sys/hypervisor will still be present, 120 but will have no xen contents. 121 122config XEN_XENBUS_FRONTEND 123 tristate 124 125config XEN_GNTDEV 126 tristate "userspace grant access device driver" 127 depends on XEN 128 default m 129 select MMU_NOTIFIER 130 help 131 Allows userspace processes to use grants. 132 133config XEN_GRANT_DEV_ALLOC 134 tristate "User-space grant reference allocator driver" 135 depends on XEN 136 default m 137 help 138 Allows userspace processes to create pages with access granted 139 to other domains. This can be used to implement frontend drivers 140 or as part of an inter-domain shared memory channel. 141 142config SWIOTLB_XEN 143 def_bool y 144 depends on PCI && X86 145 select SWIOTLB 146 147config XEN_TMEM 148 tristate 149 depends on !ARM 150 default m if (CLEANCACHE || FRONTSWAP) 151 help 152 Shim to interface in-kernel Transcendent Memory hooks 153 (e.g. cleancache and frontswap) to Xen tmem hypercalls. 154 155config XEN_PCIDEV_BACKEND 156 tristate "Xen PCI-device backend driver" 157 depends on PCI && X86 && XEN 158 depends on XEN_BACKEND 159 default m 160 help 161 The PCI device backend driver allows the kernel to export arbitrary 162 PCI devices to other guests. If you select this to be a module, you 163 will need to make sure no other driver has bound to the device(s) 164 you want to make visible to other guests. 165 166 The parameter "passthrough" allows you specify how you want the PCI 167 devices to appear in the guest. You can choose the default (0) where 168 PCI topology starts at 00.00.0, or (1) for passthrough if you want 169 the PCI devices topology appear the same as in the host. 170 171 The "hide" parameter (only applicable if backend driver is compiled 172 into the kernel) allows you to bind the PCI devices to this module 173 from the default device drivers. The argument is the list of PCI BDFs: 174 xen-pciback.hide=(03:00.0)(04:00.0) 175 176 If in doubt, say m. 177 178config XEN_PRIVCMD 179 tristate 180 depends on XEN 181 default m 182 183config XEN_STUB 184 bool "Xen stub drivers" 185 depends on XEN && X86_64 && BROKEN 186 default n 187 help 188 Allow kernel to install stub drivers, to reserve space for Xen drivers, 189 i.e. memory hotplug and cpu hotplug, and to block native drivers loaded, 190 so that real Xen drivers can be modular. 191 192 To enable Xen features like cpu and memory hotplug, select Y here. 193 194config XEN_ACPI_HOTPLUG_MEMORY 195 tristate "Xen ACPI memory hotplug" 196 depends on XEN_DOM0 && XEN_STUB && ACPI 197 default n 198 help 199 This is Xen ACPI memory hotplug. 200 201 Currently Xen only support ACPI memory hot-add. If you want 202 to hot-add memory at runtime (the hot-added memory cannot be 203 removed until machine stop), select Y/M here, otherwise select N. 204 205config XEN_ACPI_HOTPLUG_CPU 206 tristate "Xen ACPI cpu hotplug" 207 depends on XEN_DOM0 && XEN_STUB && ACPI 208 select ACPI_CONTAINER 209 default n 210 help 211 Xen ACPI cpu enumerating and hotplugging 212 213 For hotplugging, currently Xen only support ACPI cpu hotadd. 214 If you want to hotadd cpu at runtime (the hotadded cpu cannot 215 be removed until machine stop), select Y/M here. 216 217config XEN_ACPI_PROCESSOR 218 tristate "Xen ACPI processor" 219 depends on XEN && X86 && ACPI_PROCESSOR && CPU_FREQ 220 default m 221 help 222 This ACPI processor uploads Power Management information to the Xen 223 hypervisor. 224 225 To do that the driver parses the Power Management data and uploads 226 said information to the Xen hypervisor. Then the Xen hypervisor can 227 select the proper Cx and Pxx states. It also registers itslef as the 228 SMM so that other drivers (such as ACPI cpufreq scaling driver) will 229 not load. 230 231 To compile this driver as a module, choose M here: the module will be 232 called xen_acpi_processor If you do not know what to choose, select 233 M here. If the CPUFREQ drivers are built in, select Y here. 234 235config XEN_MCE_LOG 236 bool "Xen platform mcelog" 237 depends on XEN_DOM0 && X86_64 && X86_MCE 238 default n 239 help 240 Allow kernel fetching MCE error from Xen platform and 241 converting it into Linux mcelog format for mcelog tools 242 243config XEN_HAVE_PVMMU 244 bool 245 246endmenu 247