1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x 4 * 5 * Based on acquirewdt.c by Alan Cox <alan@lxorguk.ukuu.org.uk> 6 * and some other existing drivers 7 * 8 * The authors do NOT admit liability nor provide warranty for 9 * any of this software. This material is provided "AS-IS" in 10 * the hope that it may be useful for others. 11 * 12 * (C) Copyright 2003-2006 Sven Anders <anders@anduras.de> 13 * 14 * History: 15 * 2003 - Created version 1.0 for Linux 2.4.x. 16 * 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE 17 * features. Released version 1.1 18 * 19 * Theory of operation: 20 * 21 * A Watchdog Timer (WDT) is a hardware circuit that can 22 * reset the computer system in case of a software fault. 23 * You probably knew that already. 24 * 25 * Usually a userspace daemon will notify the kernel WDT driver 26 * via the /dev/watchdog special device file that userspace is 27 * still alive, at regular intervals. When such a notification 28 * occurs, the driver will usually tell the hardware watchdog 29 * that everything is in order, and that the watchdog should wait 30 * for yet another little while to reset the system. 31 * If userspace fails (RAM error, kernel bug, whatever), the 32 * notifications cease to occur, and the hardware watchdog will 33 * reset the system (causing a reboot) after the timeout occurs. 34 * 35 * Create device with: 36 * mknod /dev/watchdog c 10 130 37 * 38 * For an example userspace keep-alive daemon, see: 39 * Documentation/watchdog/wdt.rst 40 */ 41 42 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 43 44 #include <linux/module.h> 45 #include <linux/moduleparam.h> 46 #include <linux/types.h> 47 #include <linux/miscdevice.h> 48 #include <linux/watchdog.h> 49 #include <linux/delay.h> 50 #include <linux/fs.h> 51 #include <linux/ioport.h> 52 #include <linux/notifier.h> 53 #include <linux/reboot.h> 54 #include <linux/init.h> 55 #include <linux/spinlock.h> 56 #include <linux/io.h> 57 #include <linux/uaccess.h> 58 59 60 /* enable support for minutes as units? */ 61 /* (does not always work correctly, so disabled by default!) */ 62 #define SMSC_SUPPORT_MINUTES 63 #undef SMSC_SUPPORT_MINUTES 64 65 #define MAX_TIMEOUT 255 66 67 #define UNIT_SECOND 0 68 #define UNIT_MINUTE 1 69 70 #define VERSION "1.1" 71 72 #define IOPORT 0x3F0 73 #define IOPORT_SIZE 2 74 #define IODEV_NO 8 75 76 static int unit = UNIT_SECOND; /* timer's unit */ 77 static int timeout = 60; /* timeout value: default is 60 "units" */ 78 static unsigned long timer_enabled; /* is the timer enabled? */ 79 80 static char expect_close; /* is the close expected? */ 81 82 static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */ 83 84 static bool nowayout = WATCHDOG_NOWAYOUT; 85 86 /* -- Low level function ----------------------------------------*/ 87 88 /* unlock the IO chip */ 89 90 static inline void open_io_config(void) 91 { 92 outb(0x55, IOPORT); 93 mdelay(1); 94 outb(0x55, IOPORT); 95 } 96 97 /* lock the IO chip */ 98 static inline void close_io_config(void) 99 { 100 outb(0xAA, IOPORT); 101 } 102 103 /* select the IO device */ 104 static inline void select_io_device(unsigned char devno) 105 { 106 outb(0x07, IOPORT); 107 outb(devno, IOPORT+1); 108 } 109 110 /* write to the control register */ 111 static inline void write_io_cr(unsigned char reg, unsigned char data) 112 { 113 outb(reg, IOPORT); 114 outb(data, IOPORT+1); 115 } 116 117 /* read from the control register */ 118 static inline char read_io_cr(unsigned char reg) 119 { 120 outb(reg, IOPORT); 121 return inb(IOPORT+1); 122 } 123 124 /* -- Medium level functions ------------------------------------*/ 125 126 static inline void gpio_bit12(unsigned char reg) 127 { 128 /* -- General Purpose I/O Bit 1.2 -- 129 * Bit 0, In/Out: 0 = Output, 1 = Input 130 * Bit 1, Polarity: 0 = No Invert, 1 = Invert 131 * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable 132 * Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17, 133 * 11 = Either Edge Triggered Intr. 2 134 * Bit 5/6 (Reserved) 135 * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain 136 */ 137 write_io_cr(0xE2, reg); 138 } 139 140 static inline void gpio_bit13(unsigned char reg) 141 { 142 /* -- General Purpose I/O Bit 1.3 -- 143 * Bit 0, In/Out: 0 = Output, 1 = Input 144 * Bit 1, Polarity: 0 = No Invert, 1 = Invert 145 * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable 146 * Bit 3, Function select: 0 = GPI/O, 1 = LED 147 * Bit 4-6 (Reserved) 148 * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain 149 */ 150 write_io_cr(0xE3, reg); 151 } 152 153 static inline void wdt_timer_units(unsigned char new_units) 154 { 155 /* -- Watchdog timer units -- 156 * Bit 0-6 (Reserved) 157 * Bit 7, WDT Time-out Value Units Select 158 * (0 = Minutes, 1 = Seconds) 159 */ 160 write_io_cr(0xF1, new_units); 161 } 162 163 static inline void wdt_timeout_value(unsigned char new_timeout) 164 { 165 /* -- Watchdog Timer Time-out Value -- 166 * Bit 0-7 Binary coded units (0=Disabled, 1..255) 167 */ 168 write_io_cr(0xF2, new_timeout); 169 } 170 171 static inline void wdt_timer_conf(unsigned char conf) 172 { 173 /* -- Watchdog timer configuration -- 174 * Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon 175 * Gameport I/O 176 * Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. 177 * Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr 178 * Bit 3 Reset the timer 179 * (Wrong in SMsC documentation? Given as: PowerLED Timout 180 * Enabled) 181 * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, 182 * 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) 183 */ 184 write_io_cr(0xF3, conf); 185 } 186 187 static inline void wdt_timer_ctrl(unsigned char reg) 188 { 189 /* -- Watchdog timer control -- 190 * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occurred 191 * Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz 192 * Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) 193 * Bit 3 P20 Force Timeout enabled: 194 * 0 = P20 activity does not generate the WD timeout event 195 * 1 = P20 Allows rising edge of P20, from the keyboard 196 * controller, to force the WD timeout event. 197 * Bit 4 (Reserved) 198 * -- Soft power management -- 199 * Bit 5 Stop Counter: 1 = Stop software power down counter 200 * set via register 0xB8, (self-cleaning) 201 * (Upon read: 0 = Counter running, 1 = Counter stopped) 202 * Bit 6 Restart Counter: 1 = Restart software power down counter 203 * set via register 0xB8, (self-cleaning) 204 * Bit 7 SPOFF: 1 = Force software power down (self-cleaning) 205 */ 206 write_io_cr(0xF4, reg); 207 } 208 209 /* -- Higher level functions ------------------------------------*/ 210 211 /* initialize watchdog */ 212 213 static void wb_smsc_wdt_initialize(void) 214 { 215 unsigned char old; 216 217 spin_lock(&io_lock); 218 open_io_config(); 219 select_io_device(IODEV_NO); 220 221 /* enable the watchdog */ 222 gpio_bit13(0x08); /* Select pin 80 = LED not GPIO */ 223 gpio_bit12(0x0A); /* Set pin 79 = WDT not 224 GPIO/Output/Polarity=Invert */ 225 /* disable the timeout */ 226 wdt_timeout_value(0); 227 228 /* reset control register */ 229 wdt_timer_ctrl(0x00); 230 231 /* reset configuration register */ 232 wdt_timer_conf(0x00); 233 234 /* read old (timer units) register */ 235 old = read_io_cr(0xF1) & 0x7F; 236 if (unit == UNIT_SECOND) 237 old |= 0x80; /* set to seconds */ 238 239 /* set the watchdog timer units */ 240 wdt_timer_units(old); 241 242 close_io_config(); 243 spin_unlock(&io_lock); 244 } 245 246 /* shutdown the watchdog */ 247 248 static void wb_smsc_wdt_shutdown(void) 249 { 250 spin_lock(&io_lock); 251 open_io_config(); 252 select_io_device(IODEV_NO); 253 254 /* disable the watchdog */ 255 gpio_bit13(0x09); 256 gpio_bit12(0x09); 257 258 /* reset watchdog config register */ 259 wdt_timer_conf(0x00); 260 261 /* reset watchdog control register */ 262 wdt_timer_ctrl(0x00); 263 264 /* disable timeout */ 265 wdt_timeout_value(0x00); 266 267 close_io_config(); 268 spin_unlock(&io_lock); 269 } 270 271 /* set timeout => enable watchdog */ 272 273 static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) 274 { 275 spin_lock(&io_lock); 276 open_io_config(); 277 select_io_device(IODEV_NO); 278 279 /* set Power LED to blink, if we enable the timeout */ 280 wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02); 281 282 /* set timeout value */ 283 wdt_timeout_value(new_timeout); 284 285 close_io_config(); 286 spin_unlock(&io_lock); 287 } 288 289 /* get timeout */ 290 291 static unsigned char wb_smsc_wdt_get_timeout(void) 292 { 293 unsigned char set_timeout; 294 295 spin_lock(&io_lock); 296 open_io_config(); 297 select_io_device(IODEV_NO); 298 set_timeout = read_io_cr(0xF2); 299 close_io_config(); 300 spin_unlock(&io_lock); 301 302 return set_timeout; 303 } 304 305 /* disable watchdog */ 306 307 static void wb_smsc_wdt_disable(void) 308 { 309 /* set the timeout to 0 to disable the watchdog */ 310 wb_smsc_wdt_set_timeout(0); 311 } 312 313 /* enable watchdog by setting the current timeout */ 314 315 static void wb_smsc_wdt_enable(void) 316 { 317 /* set the current timeout... */ 318 wb_smsc_wdt_set_timeout(timeout); 319 } 320 321 /* reset the timer */ 322 323 static void wb_smsc_wdt_reset_timer(void) 324 { 325 spin_lock(&io_lock); 326 open_io_config(); 327 select_io_device(IODEV_NO); 328 329 /* reset the timer */ 330 wdt_timeout_value(timeout); 331 wdt_timer_conf(0x08); 332 333 close_io_config(); 334 spin_unlock(&io_lock); 335 } 336 337 /* return, if the watchdog is enabled (timeout is set...) */ 338 339 static int wb_smsc_wdt_status(void) 340 { 341 return (wb_smsc_wdt_get_timeout() == 0) ? 0 : WDIOF_KEEPALIVEPING; 342 } 343 344 345 /* -- File operations -------------------------------------------*/ 346 347 /* open => enable watchdog and set initial timeout */ 348 349 static int wb_smsc_wdt_open(struct inode *inode, struct file *file) 350 { 351 /* /dev/watchdog can only be opened once */ 352 353 if (test_and_set_bit(0, &timer_enabled)) 354 return -EBUSY; 355 356 if (nowayout) 357 __module_get(THIS_MODULE); 358 359 /* Reload and activate timer */ 360 wb_smsc_wdt_enable(); 361 362 pr_info("Watchdog enabled. Timeout set to %d %s\n", 363 timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); 364 365 return stream_open(inode, file); 366 } 367 368 /* close => shut off the timer */ 369 370 static int wb_smsc_wdt_release(struct inode *inode, struct file *file) 371 { 372 /* Shut off the timer. */ 373 374 if (expect_close == 42) { 375 wb_smsc_wdt_disable(); 376 pr_info("Watchdog disabled, sleeping again...\n"); 377 } else { 378 pr_crit("Unexpected close, not stopping watchdog!\n"); 379 wb_smsc_wdt_reset_timer(); 380 } 381 382 clear_bit(0, &timer_enabled); 383 expect_close = 0; 384 return 0; 385 } 386 387 /* write => update the timer to keep the machine alive */ 388 389 static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, 390 size_t len, loff_t *ppos) 391 { 392 /* See if we got the magic character 'V' and reload the timer */ 393 if (len) { 394 if (!nowayout) { 395 size_t i; 396 397 /* reset expect flag */ 398 expect_close = 0; 399 400 /* scan to see whether or not we got the 401 magic character */ 402 for (i = 0; i != len; i++) { 403 char c; 404 if (get_user(c, data + i)) 405 return -EFAULT; 406 if (c == 'V') 407 expect_close = 42; 408 } 409 } 410 411 /* someone wrote to us, we should reload the timer */ 412 wb_smsc_wdt_reset_timer(); 413 } 414 return len; 415 } 416 417 /* ioctl => control interface */ 418 419 static long wb_smsc_wdt_ioctl(struct file *file, 420 unsigned int cmd, unsigned long arg) 421 { 422 int new_timeout; 423 424 union { 425 struct watchdog_info __user *ident; 426 int __user *i; 427 } uarg; 428 429 static const struct watchdog_info ident = { 430 .options = WDIOF_KEEPALIVEPING | 431 WDIOF_SETTIMEOUT | 432 WDIOF_MAGICCLOSE, 433 .firmware_version = 0, 434 .identity = "SMsC 37B787 Watchdog", 435 }; 436 437 uarg.i = (int __user *)arg; 438 439 switch (cmd) { 440 case WDIOC_GETSUPPORT: 441 return copy_to_user(uarg.ident, &ident, sizeof(ident)) 442 ? -EFAULT : 0; 443 case WDIOC_GETSTATUS: 444 return put_user(wb_smsc_wdt_status(), uarg.i); 445 case WDIOC_GETBOOTSTATUS: 446 return put_user(0, uarg.i); 447 case WDIOC_SETOPTIONS: 448 { 449 int options, retval = -EINVAL; 450 451 if (get_user(options, uarg.i)) 452 return -EFAULT; 453 454 if (options & WDIOS_DISABLECARD) { 455 wb_smsc_wdt_disable(); 456 retval = 0; 457 } 458 if (options & WDIOS_ENABLECARD) { 459 wb_smsc_wdt_enable(); 460 retval = 0; 461 } 462 return retval; 463 } 464 case WDIOC_KEEPALIVE: 465 wb_smsc_wdt_reset_timer(); 466 return 0; 467 case WDIOC_SETTIMEOUT: 468 if (get_user(new_timeout, uarg.i)) 469 return -EFAULT; 470 /* the API states this is given in secs */ 471 if (unit == UNIT_MINUTE) 472 new_timeout /= 60; 473 if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) 474 return -EINVAL; 475 timeout = new_timeout; 476 wb_smsc_wdt_set_timeout(timeout); 477 /* fall through - and return the new timeout... */ 478 case WDIOC_GETTIMEOUT: 479 new_timeout = timeout; 480 if (unit == UNIT_MINUTE) 481 new_timeout *= 60; 482 return put_user(new_timeout, uarg.i); 483 default: 484 return -ENOTTY; 485 } 486 } 487 488 /* -- Notifier funtions -----------------------------------------*/ 489 490 static int wb_smsc_wdt_notify_sys(struct notifier_block *this, 491 unsigned long code, void *unused) 492 { 493 if (code == SYS_DOWN || code == SYS_HALT) { 494 /* set timeout to 0, to avoid possible race-condition */ 495 timeout = 0; 496 wb_smsc_wdt_disable(); 497 } 498 return NOTIFY_DONE; 499 } 500 501 /* -- Module's structures ---------------------------------------*/ 502 503 static const struct file_operations wb_smsc_wdt_fops = { 504 .owner = THIS_MODULE, 505 .llseek = no_llseek, 506 .write = wb_smsc_wdt_write, 507 .unlocked_ioctl = wb_smsc_wdt_ioctl, 508 .open = wb_smsc_wdt_open, 509 .release = wb_smsc_wdt_release, 510 }; 511 512 static struct notifier_block wb_smsc_wdt_notifier = { 513 .notifier_call = wb_smsc_wdt_notify_sys, 514 }; 515 516 static struct miscdevice wb_smsc_wdt_miscdev = { 517 .minor = WATCHDOG_MINOR, 518 .name = "watchdog", 519 .fops = &wb_smsc_wdt_fops, 520 }; 521 522 /* -- Module init functions -------------------------------------*/ 523 524 /* module's "constructor" */ 525 526 static int __init wb_smsc_wdt_init(void) 527 { 528 int ret; 529 530 pr_info("SMsC 37B787 watchdog component driver " 531 VERSION " initialising...\n"); 532 533 if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) { 534 pr_err("Unable to register IO port %#x\n", IOPORT); 535 ret = -EBUSY; 536 goto out_pnp; 537 } 538 539 /* set new maximum, if it's too big */ 540 if (timeout > MAX_TIMEOUT) 541 timeout = MAX_TIMEOUT; 542 543 /* init the watchdog timer */ 544 wb_smsc_wdt_initialize(); 545 546 ret = register_reboot_notifier(&wb_smsc_wdt_notifier); 547 if (ret) { 548 pr_err("Unable to register reboot notifier err = %d\n", ret); 549 goto out_io; 550 } 551 552 ret = misc_register(&wb_smsc_wdt_miscdev); 553 if (ret) { 554 pr_err("Unable to register miscdev on minor %d\n", 555 WATCHDOG_MINOR); 556 goto out_rbt; 557 } 558 559 /* output info */ 560 pr_info("Timeout set to %d %s\n", 561 timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); 562 pr_info("Watchdog initialized and sleeping (nowayout=%d)...\n", 563 nowayout); 564 out_clean: 565 return ret; 566 567 out_rbt: 568 unregister_reboot_notifier(&wb_smsc_wdt_notifier); 569 570 out_io: 571 release_region(IOPORT, IOPORT_SIZE); 572 573 out_pnp: 574 goto out_clean; 575 } 576 577 /* module's "destructor" */ 578 579 static void __exit wb_smsc_wdt_exit(void) 580 { 581 /* Stop the timer before we leave */ 582 if (!nowayout) { 583 wb_smsc_wdt_shutdown(); 584 pr_info("Watchdog disabled\n"); 585 } 586 587 misc_deregister(&wb_smsc_wdt_miscdev); 588 unregister_reboot_notifier(&wb_smsc_wdt_notifier); 589 release_region(IOPORT, IOPORT_SIZE); 590 591 pr_info("SMsC 37B787 watchdog component driver removed\n"); 592 } 593 594 module_init(wb_smsc_wdt_init); 595 module_exit(wb_smsc_wdt_exit); 596 597 MODULE_AUTHOR("Sven Anders <anders@anduras.de>"); 598 MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " 599 VERSION ")"); 600 MODULE_LICENSE("GPL"); 601 602 #ifdef SMSC_SUPPORT_MINUTES 603 module_param(unit, int, 0); 604 MODULE_PARM_DESC(unit, 605 "set unit to use, 0=seconds or 1=minutes, default is 0"); 606 #endif 607 608 module_param(timeout, int, 0); 609 MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60"); 610 611 module_param(nowayout, bool, 0); 612 MODULE_PARM_DESC(nowayout, 613 "Watchdog cannot be stopped once started (default=" 614 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); 615