xref: /openbmc/linux/drivers/watchdog/sa1100_wdt.c (revision 1fa0a7dc)
1 /*
2  *	Watchdog driver for the SA11x0/PXA2xx
3  *
4  *	(c) Copyright 2000 Oleg Drokin <green@crimea.edu>
5  *	    Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
6  *
7  *	This program is free software; you can redistribute it and/or
8  *	modify it under the terms of the GNU General Public License
9  *	as published by the Free Software Foundation; either version
10  *	2 of the License, or (at your option) any later version.
11  *
12  *	Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
13  *	warranty for any of this software. This material is provided
14  *	"AS-IS" and at no charge.
15  *
16  *	(c) Copyright 2000           Oleg Drokin <green@crimea.edu>
17  *
18  *	27/11/2000 Initial release
19  */
20 
21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
22 
23 #include <linux/module.h>
24 #include <linux/moduleparam.h>
25 #include <linux/clk.h>
26 #include <linux/types.h>
27 #include <linux/kernel.h>
28 #include <linux/fs.h>
29 #include <linux/miscdevice.h>
30 #include <linux/watchdog.h>
31 #include <linux/init.h>
32 #include <linux/io.h>
33 #include <linux/bitops.h>
34 #include <linux/uaccess.h>
35 #include <linux/timex.h>
36 
37 #ifdef CONFIG_ARCH_PXA
38 #include <mach/regs-ost.h>
39 #endif
40 
41 #include <mach/reset.h>
42 #include <mach/hardware.h>
43 
44 static unsigned long oscr_freq;
45 static unsigned long sa1100wdt_users;
46 static unsigned int pre_margin;
47 static int boot_status;
48 
49 /*
50  *	Allow only one person to hold it open
51  */
52 static int sa1100dog_open(struct inode *inode, struct file *file)
53 {
54 	if (test_and_set_bit(1, &sa1100wdt_users))
55 		return -EBUSY;
56 
57 	/* Activate SA1100 Watchdog timer */
58 	writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
59 	writel_relaxed(OSSR_M3, OSSR);
60 	writel_relaxed(OWER_WME, OWER);
61 	writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER);
62 	return stream_open(inode, file);
63 }
64 
65 /*
66  * The watchdog cannot be disabled.
67  *
68  * Previous comments suggested that turning off the interrupt by
69  * clearing OIER[E3] would prevent the watchdog timing out but this
70  * does not appear to be true (at least on the PXA255).
71  */
72 static int sa1100dog_release(struct inode *inode, struct file *file)
73 {
74 	pr_crit("Device closed - timer will not stop\n");
75 	clear_bit(1, &sa1100wdt_users);
76 	return 0;
77 }
78 
79 static ssize_t sa1100dog_write(struct file *file, const char __user *data,
80 						size_t len, loff_t *ppos)
81 {
82 	if (len)
83 		/* Refresh OSMR3 timer. */
84 		writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
85 	return len;
86 }
87 
88 static const struct watchdog_info ident = {
89 	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT
90 				| WDIOF_KEEPALIVEPING,
91 	.identity	= "SA1100/PXA255 Watchdog",
92 	.firmware_version	= 1,
93 };
94 
95 static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
96 							unsigned long arg)
97 {
98 	int ret = -ENOTTY;
99 	int time;
100 	void __user *argp = (void __user *)arg;
101 	int __user *p = argp;
102 
103 	switch (cmd) {
104 	case WDIOC_GETSUPPORT:
105 		ret = copy_to_user(argp, &ident,
106 				   sizeof(ident)) ? -EFAULT : 0;
107 		break;
108 
109 	case WDIOC_GETSTATUS:
110 		ret = put_user(0, p);
111 		break;
112 
113 	case WDIOC_GETBOOTSTATUS:
114 		ret = put_user(boot_status, p);
115 		break;
116 
117 	case WDIOC_KEEPALIVE:
118 		writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
119 		ret = 0;
120 		break;
121 
122 	case WDIOC_SETTIMEOUT:
123 		ret = get_user(time, p);
124 		if (ret)
125 			break;
126 
127 		if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) {
128 			ret = -EINVAL;
129 			break;
130 		}
131 
132 		pre_margin = oscr_freq * time;
133 		writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
134 		/*fall through*/
135 
136 	case WDIOC_GETTIMEOUT:
137 		ret = put_user(pre_margin / oscr_freq, p);
138 		break;
139 	}
140 	return ret;
141 }
142 
143 static const struct file_operations sa1100dog_fops = {
144 	.owner		= THIS_MODULE,
145 	.llseek		= no_llseek,
146 	.write		= sa1100dog_write,
147 	.unlocked_ioctl	= sa1100dog_ioctl,
148 	.open		= sa1100dog_open,
149 	.release	= sa1100dog_release,
150 };
151 
152 static struct miscdevice sa1100dog_miscdev = {
153 	.minor		= WATCHDOG_MINOR,
154 	.name		= "watchdog",
155 	.fops		= &sa1100dog_fops,
156 };
157 
158 static int margin __initdata = 60;		/* (secs) Default is 1 minute */
159 static struct clk *clk;
160 
161 static int __init sa1100dog_init(void)
162 {
163 	int ret;
164 
165 	clk = clk_get(NULL, "OSTIMER0");
166 	if (IS_ERR(clk)) {
167 		pr_err("SA1100/PXA2xx Watchdog Timer: clock not found: %d\n",
168 		       (int) PTR_ERR(clk));
169 		return PTR_ERR(clk);
170 	}
171 
172 	ret = clk_prepare_enable(clk);
173 	if (ret) {
174 		pr_err("SA1100/PXA2xx Watchdog Timer: clock failed to prepare+enable: %d\n",
175 		       ret);
176 		goto err;
177 	}
178 
179 	oscr_freq = clk_get_rate(clk);
180 
181 	/*
182 	 * Read the reset status, and save it for later.  If
183 	 * we suspend, RCSR will be cleared, and the watchdog
184 	 * reset reason will be lost.
185 	 */
186 	boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
187 				WDIOF_CARDRESET : 0;
188 	pre_margin = oscr_freq * margin;
189 
190 	ret = misc_register(&sa1100dog_miscdev);
191 	if (ret == 0) {
192 		pr_info("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
193 			margin);
194 		return 0;
195 	}
196 
197 	clk_disable_unprepare(clk);
198 err:
199 	clk_put(clk);
200 	return ret;
201 }
202 
203 static void __exit sa1100dog_exit(void)
204 {
205 	misc_deregister(&sa1100dog_miscdev);
206 	clk_disable_unprepare(clk);
207 	clk_put(clk);
208 }
209 
210 module_init(sa1100dog_init);
211 module_exit(sa1100dog_exit);
212 
213 MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
214 MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
215 
216 module_param(margin, int, 0);
217 MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
218 
219 MODULE_LICENSE("GPL");
220