xref: /openbmc/linux/drivers/watchdog/qcom-wdt.c (revision e3b9f1e8)
1 /* Copyright (c) 2014, The Linux Foundation. All rights reserved.
2  *
3  * This program is free software; you can redistribute it and/or modify
4  * it under the terms of the GNU General Public License version 2 and
5  * only version 2 as published by the Free Software Foundation.
6  *
7  * This program is distributed in the hope that it will be useful,
8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
10  * GNU General Public License for more details.
11  *
12  */
13 #include <linux/clk.h>
14 #include <linux/delay.h>
15 #include <linux/io.h>
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/of.h>
19 #include <linux/platform_device.h>
20 #include <linux/watchdog.h>
21 #include <linux/of_device.h>
22 
23 enum wdt_reg {
24 	WDT_RST,
25 	WDT_EN,
26 	WDT_STS,
27 	WDT_BARK_TIME,
28 	WDT_BITE_TIME,
29 };
30 
31 static const u32 reg_offset_data_apcs_tmr[] = {
32 	[WDT_RST] = 0x38,
33 	[WDT_EN] = 0x40,
34 	[WDT_STS] = 0x44,
35 	[WDT_BARK_TIME] = 0x4C,
36 	[WDT_BITE_TIME] = 0x5C,
37 };
38 
39 static const u32 reg_offset_data_kpss[] = {
40 	[WDT_RST] = 0x4,
41 	[WDT_EN] = 0x8,
42 	[WDT_STS] = 0xC,
43 	[WDT_BARK_TIME] = 0x10,
44 	[WDT_BITE_TIME] = 0x14,
45 };
46 
47 struct qcom_wdt {
48 	struct watchdog_device	wdd;
49 	struct clk		*clk;
50 	unsigned long		rate;
51 	void __iomem		*base;
52 	const u32		*layout;
53 };
54 
55 static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg)
56 {
57 	return wdt->base + wdt->layout[reg];
58 }
59 
60 static inline
61 struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
62 {
63 	return container_of(wdd, struct qcom_wdt, wdd);
64 }
65 
66 static int qcom_wdt_start(struct watchdog_device *wdd)
67 {
68 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
69 
70 	writel(0, wdt_addr(wdt, WDT_EN));
71 	writel(1, wdt_addr(wdt, WDT_RST));
72 	writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME));
73 	writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME));
74 	writel(1, wdt_addr(wdt, WDT_EN));
75 	return 0;
76 }
77 
78 static int qcom_wdt_stop(struct watchdog_device *wdd)
79 {
80 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
81 
82 	writel(0, wdt_addr(wdt, WDT_EN));
83 	return 0;
84 }
85 
86 static int qcom_wdt_ping(struct watchdog_device *wdd)
87 {
88 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
89 
90 	writel(1, wdt_addr(wdt, WDT_RST));
91 	return 0;
92 }
93 
94 static int qcom_wdt_set_timeout(struct watchdog_device *wdd,
95 				unsigned int timeout)
96 {
97 	wdd->timeout = timeout;
98 	return qcom_wdt_start(wdd);
99 }
100 
101 static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
102 			    void *data)
103 {
104 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
105 	u32 timeout;
106 
107 	/*
108 	 * Trigger watchdog bite:
109 	 *    Setup BITE_TIME to be 128ms, and enable WDT.
110 	 */
111 	timeout = 128 * wdt->rate / 1000;
112 
113 	writel(0, wdt_addr(wdt, WDT_EN));
114 	writel(1, wdt_addr(wdt, WDT_RST));
115 	writel(timeout, wdt_addr(wdt, WDT_BARK_TIME));
116 	writel(timeout, wdt_addr(wdt, WDT_BITE_TIME));
117 	writel(1, wdt_addr(wdt, WDT_EN));
118 
119 	/*
120 	 * Actually make sure the above sequence hits hardware before sleeping.
121 	 */
122 	wmb();
123 
124 	msleep(150);
125 	return 0;
126 }
127 
128 static const struct watchdog_ops qcom_wdt_ops = {
129 	.start		= qcom_wdt_start,
130 	.stop		= qcom_wdt_stop,
131 	.ping		= qcom_wdt_ping,
132 	.set_timeout	= qcom_wdt_set_timeout,
133 	.restart        = qcom_wdt_restart,
134 	.owner		= THIS_MODULE,
135 };
136 
137 static const struct watchdog_info qcom_wdt_info = {
138 	.options	= WDIOF_KEEPALIVEPING
139 			| WDIOF_MAGICCLOSE
140 			| WDIOF_SETTIMEOUT
141 			| WDIOF_CARDRESET,
142 	.identity	= KBUILD_MODNAME,
143 };
144 
145 static int qcom_wdt_probe(struct platform_device *pdev)
146 {
147 	struct qcom_wdt *wdt;
148 	struct resource *res;
149 	struct device_node *np = pdev->dev.of_node;
150 	const u32 *regs;
151 	u32 percpu_offset;
152 	int ret;
153 
154 	regs = of_device_get_match_data(&pdev->dev);
155 	if (!regs) {
156 		dev_err(&pdev->dev, "Unsupported QCOM WDT module\n");
157 		return -ENODEV;
158 	}
159 
160 	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
161 	if (!wdt)
162 		return -ENOMEM;
163 
164 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
165 	if (!res)
166 		return -ENOMEM;
167 
168 	/* We use CPU0's DGT for the watchdog */
169 	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
170 		percpu_offset = 0;
171 
172 	res->start += percpu_offset;
173 	res->end += percpu_offset;
174 
175 	wdt->base = devm_ioremap_resource(&pdev->dev, res);
176 	if (IS_ERR(wdt->base))
177 		return PTR_ERR(wdt->base);
178 
179 	wdt->clk = devm_clk_get(&pdev->dev, NULL);
180 	if (IS_ERR(wdt->clk)) {
181 		dev_err(&pdev->dev, "failed to get input clock\n");
182 		return PTR_ERR(wdt->clk);
183 	}
184 
185 	ret = clk_prepare_enable(wdt->clk);
186 	if (ret) {
187 		dev_err(&pdev->dev, "failed to setup clock\n");
188 		return ret;
189 	}
190 
191 	/*
192 	 * We use the clock rate to calculate the max timeout, so ensure it's
193 	 * not zero to avoid a divide-by-zero exception.
194 	 *
195 	 * WATCHDOG_CORE assumes units of seconds, if the WDT is clocked such
196 	 * that it would bite before a second elapses it's usefulness is
197 	 * limited.  Bail if this is the case.
198 	 */
199 	wdt->rate = clk_get_rate(wdt->clk);
200 	if (wdt->rate == 0 ||
201 	    wdt->rate > 0x10000000U) {
202 		dev_err(&pdev->dev, "invalid clock rate\n");
203 		ret = -EINVAL;
204 		goto err_clk_unprepare;
205 	}
206 
207 	wdt->wdd.info = &qcom_wdt_info;
208 	wdt->wdd.ops = &qcom_wdt_ops;
209 	wdt->wdd.min_timeout = 1;
210 	wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
211 	wdt->wdd.parent = &pdev->dev;
212 	wdt->layout = regs;
213 
214 	if (readl(wdt_addr(wdt, WDT_STS)) & 1)
215 		wdt->wdd.bootstatus = WDIOF_CARDRESET;
216 
217 	/*
218 	 * If 'timeout-sec' unspecified in devicetree, assume a 30 second
219 	 * default, unless the max timeout is less than 30 seconds, then use
220 	 * the max instead.
221 	 */
222 	wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U);
223 	watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
224 
225 	ret = watchdog_register_device(&wdt->wdd);
226 	if (ret) {
227 		dev_err(&pdev->dev, "failed to register watchdog\n");
228 		goto err_clk_unprepare;
229 	}
230 
231 	platform_set_drvdata(pdev, wdt);
232 	return 0;
233 
234 err_clk_unprepare:
235 	clk_disable_unprepare(wdt->clk);
236 	return ret;
237 }
238 
239 static int qcom_wdt_remove(struct platform_device *pdev)
240 {
241 	struct qcom_wdt *wdt = platform_get_drvdata(pdev);
242 
243 	watchdog_unregister_device(&wdt->wdd);
244 	clk_disable_unprepare(wdt->clk);
245 	return 0;
246 }
247 
248 static const struct of_device_id qcom_wdt_of_table[] = {
249 	{ .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
250 	{ .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
251 	{ .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
252 	{ },
253 };
254 MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
255 
256 static struct platform_driver qcom_watchdog_driver = {
257 	.probe	= qcom_wdt_probe,
258 	.remove	= qcom_wdt_remove,
259 	.driver	= {
260 		.name		= KBUILD_MODNAME,
261 		.of_match_table	= qcom_wdt_of_table,
262 	},
263 };
264 module_platform_driver(qcom_watchdog_driver);
265 
266 MODULE_DESCRIPTION("QCOM KPSS Watchdog Driver");
267 MODULE_LICENSE("GPL v2");
268