1 // SPDX-License-Identifier: GPL-2.0-only 2 /* Copyright (c) 2014, The Linux Foundation. All rights reserved. 3 */ 4 #include <linux/bits.h> 5 #include <linux/clk.h> 6 #include <linux/delay.h> 7 #include <linux/interrupt.h> 8 #include <linux/io.h> 9 #include <linux/kernel.h> 10 #include <linux/module.h> 11 #include <linux/of.h> 12 #include <linux/platform_device.h> 13 #include <linux/watchdog.h> 14 #include <linux/of_device.h> 15 16 enum wdt_reg { 17 WDT_RST, 18 WDT_EN, 19 WDT_STS, 20 WDT_BARK_TIME, 21 WDT_BITE_TIME, 22 }; 23 24 #define QCOM_WDT_ENABLE BIT(0) 25 #define QCOM_WDT_ENABLE_IRQ BIT(1) 26 27 static const u32 reg_offset_data_apcs_tmr[] = { 28 [WDT_RST] = 0x38, 29 [WDT_EN] = 0x40, 30 [WDT_STS] = 0x44, 31 [WDT_BARK_TIME] = 0x4C, 32 [WDT_BITE_TIME] = 0x5C, 33 }; 34 35 static const u32 reg_offset_data_kpss[] = { 36 [WDT_RST] = 0x4, 37 [WDT_EN] = 0x8, 38 [WDT_STS] = 0xC, 39 [WDT_BARK_TIME] = 0x10, 40 [WDT_BITE_TIME] = 0x14, 41 }; 42 43 struct qcom_wdt { 44 struct watchdog_device wdd; 45 unsigned long rate; 46 void __iomem *base; 47 const u32 *layout; 48 }; 49 50 static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg) 51 { 52 return wdt->base + wdt->layout[reg]; 53 } 54 55 static inline 56 struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd) 57 { 58 return container_of(wdd, struct qcom_wdt, wdd); 59 } 60 61 static inline int qcom_get_enable(struct watchdog_device *wdd) 62 { 63 int enable = QCOM_WDT_ENABLE; 64 65 if (wdd->pretimeout) 66 enable |= QCOM_WDT_ENABLE_IRQ; 67 68 return enable; 69 } 70 71 static irqreturn_t qcom_wdt_isr(int irq, void *arg) 72 { 73 struct watchdog_device *wdd = arg; 74 75 watchdog_notify_pretimeout(wdd); 76 77 return IRQ_HANDLED; 78 } 79 80 static int qcom_wdt_start(struct watchdog_device *wdd) 81 { 82 struct qcom_wdt *wdt = to_qcom_wdt(wdd); 83 unsigned int bark = wdd->timeout - wdd->pretimeout; 84 85 writel(0, wdt_addr(wdt, WDT_EN)); 86 writel(1, wdt_addr(wdt, WDT_RST)); 87 writel(bark * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME)); 88 writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME)); 89 writel(qcom_get_enable(wdd), wdt_addr(wdt, WDT_EN)); 90 return 0; 91 } 92 93 static int qcom_wdt_stop(struct watchdog_device *wdd) 94 { 95 struct qcom_wdt *wdt = to_qcom_wdt(wdd); 96 97 writel(0, wdt_addr(wdt, WDT_EN)); 98 return 0; 99 } 100 101 static int qcom_wdt_ping(struct watchdog_device *wdd) 102 { 103 struct qcom_wdt *wdt = to_qcom_wdt(wdd); 104 105 writel(1, wdt_addr(wdt, WDT_RST)); 106 return 0; 107 } 108 109 static int qcom_wdt_set_timeout(struct watchdog_device *wdd, 110 unsigned int timeout) 111 { 112 wdd->timeout = timeout; 113 return qcom_wdt_start(wdd); 114 } 115 116 static int qcom_wdt_set_pretimeout(struct watchdog_device *wdd, 117 unsigned int timeout) 118 { 119 wdd->pretimeout = timeout; 120 return qcom_wdt_start(wdd); 121 } 122 123 static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action, 124 void *data) 125 { 126 struct qcom_wdt *wdt = to_qcom_wdt(wdd); 127 u32 timeout; 128 129 /* 130 * Trigger watchdog bite: 131 * Setup BITE_TIME to be 128ms, and enable WDT. 132 */ 133 timeout = 128 * wdt->rate / 1000; 134 135 writel(0, wdt_addr(wdt, WDT_EN)); 136 writel(1, wdt_addr(wdt, WDT_RST)); 137 writel(timeout, wdt_addr(wdt, WDT_BARK_TIME)); 138 writel(timeout, wdt_addr(wdt, WDT_BITE_TIME)); 139 writel(QCOM_WDT_ENABLE, wdt_addr(wdt, WDT_EN)); 140 141 /* 142 * Actually make sure the above sequence hits hardware before sleeping. 143 */ 144 wmb(); 145 146 msleep(150); 147 return 0; 148 } 149 150 static const struct watchdog_ops qcom_wdt_ops = { 151 .start = qcom_wdt_start, 152 .stop = qcom_wdt_stop, 153 .ping = qcom_wdt_ping, 154 .set_timeout = qcom_wdt_set_timeout, 155 .set_pretimeout = qcom_wdt_set_pretimeout, 156 .restart = qcom_wdt_restart, 157 .owner = THIS_MODULE, 158 }; 159 160 static const struct watchdog_info qcom_wdt_info = { 161 .options = WDIOF_KEEPALIVEPING 162 | WDIOF_MAGICCLOSE 163 | WDIOF_SETTIMEOUT 164 | WDIOF_CARDRESET, 165 .identity = KBUILD_MODNAME, 166 }; 167 168 static const struct watchdog_info qcom_wdt_pt_info = { 169 .options = WDIOF_KEEPALIVEPING 170 | WDIOF_MAGICCLOSE 171 | WDIOF_SETTIMEOUT 172 | WDIOF_PRETIMEOUT 173 | WDIOF_CARDRESET, 174 .identity = KBUILD_MODNAME, 175 }; 176 177 static void qcom_clk_disable_unprepare(void *data) 178 { 179 clk_disable_unprepare(data); 180 } 181 182 static int qcom_wdt_probe(struct platform_device *pdev) 183 { 184 struct device *dev = &pdev->dev; 185 struct qcom_wdt *wdt; 186 struct resource *res; 187 struct device_node *np = dev->of_node; 188 const u32 *regs; 189 u32 percpu_offset; 190 int irq, ret; 191 struct clk *clk; 192 193 regs = of_device_get_match_data(dev); 194 if (!regs) { 195 dev_err(dev, "Unsupported QCOM WDT module\n"); 196 return -ENODEV; 197 } 198 199 wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); 200 if (!wdt) 201 return -ENOMEM; 202 203 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 204 if (!res) 205 return -ENOMEM; 206 207 /* We use CPU0's DGT for the watchdog */ 208 if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) 209 percpu_offset = 0; 210 211 res->start += percpu_offset; 212 res->end += percpu_offset; 213 214 wdt->base = devm_ioremap_resource(dev, res); 215 if (IS_ERR(wdt->base)) 216 return PTR_ERR(wdt->base); 217 218 clk = devm_clk_get(dev, NULL); 219 if (IS_ERR(clk)) { 220 dev_err(dev, "failed to get input clock\n"); 221 return PTR_ERR(clk); 222 } 223 224 ret = clk_prepare_enable(clk); 225 if (ret) { 226 dev_err(dev, "failed to setup clock\n"); 227 return ret; 228 } 229 ret = devm_add_action_or_reset(dev, qcom_clk_disable_unprepare, clk); 230 if (ret) 231 return ret; 232 233 /* 234 * We use the clock rate to calculate the max timeout, so ensure it's 235 * not zero to avoid a divide-by-zero exception. 236 * 237 * WATCHDOG_CORE assumes units of seconds, if the WDT is clocked such 238 * that it would bite before a second elapses it's usefulness is 239 * limited. Bail if this is the case. 240 */ 241 wdt->rate = clk_get_rate(clk); 242 if (wdt->rate == 0 || 243 wdt->rate > 0x10000000U) { 244 dev_err(dev, "invalid clock rate\n"); 245 return -EINVAL; 246 } 247 248 /* check if there is pretimeout support */ 249 irq = platform_get_irq(pdev, 0); 250 if (irq > 0) { 251 ret = devm_request_irq(dev, irq, qcom_wdt_isr, 252 IRQF_TRIGGER_RISING, 253 "wdt_bark", &wdt->wdd); 254 if (ret) 255 return ret; 256 257 wdt->wdd.info = &qcom_wdt_pt_info; 258 wdt->wdd.pretimeout = 1; 259 } else { 260 if (irq == -EPROBE_DEFER) 261 return -EPROBE_DEFER; 262 263 wdt->wdd.info = &qcom_wdt_info; 264 } 265 266 wdt->wdd.ops = &qcom_wdt_ops; 267 wdt->wdd.min_timeout = 1; 268 wdt->wdd.max_timeout = 0x10000000U / wdt->rate; 269 wdt->wdd.parent = dev; 270 wdt->layout = regs; 271 272 if (readl(wdt_addr(wdt, WDT_STS)) & 1) 273 wdt->wdd.bootstatus = WDIOF_CARDRESET; 274 275 /* 276 * If 'timeout-sec' unspecified in devicetree, assume a 30 second 277 * default, unless the max timeout is less than 30 seconds, then use 278 * the max instead. 279 */ 280 wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U); 281 watchdog_init_timeout(&wdt->wdd, 0, dev); 282 283 ret = devm_watchdog_register_device(dev, &wdt->wdd); 284 if (ret) 285 return ret; 286 287 platform_set_drvdata(pdev, wdt); 288 return 0; 289 } 290 291 static int __maybe_unused qcom_wdt_suspend(struct device *dev) 292 { 293 struct qcom_wdt *wdt = dev_get_drvdata(dev); 294 295 if (watchdog_active(&wdt->wdd)) 296 qcom_wdt_stop(&wdt->wdd); 297 298 return 0; 299 } 300 301 static int __maybe_unused qcom_wdt_resume(struct device *dev) 302 { 303 struct qcom_wdt *wdt = dev_get_drvdata(dev); 304 305 if (watchdog_active(&wdt->wdd)) 306 qcom_wdt_start(&wdt->wdd); 307 308 return 0; 309 } 310 311 static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume); 312 313 static const struct of_device_id qcom_wdt_of_table[] = { 314 { .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr }, 315 { .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr }, 316 { .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss }, 317 { }, 318 }; 319 MODULE_DEVICE_TABLE(of, qcom_wdt_of_table); 320 321 static struct platform_driver qcom_watchdog_driver = { 322 .probe = qcom_wdt_probe, 323 .driver = { 324 .name = KBUILD_MODNAME, 325 .of_match_table = qcom_wdt_of_table, 326 .pm = &qcom_wdt_pm_ops, 327 }, 328 }; 329 module_platform_driver(qcom_watchdog_driver); 330 331 MODULE_DESCRIPTION("QCOM KPSS Watchdog Driver"); 332 MODULE_LICENSE("GPL v2"); 333