xref: /openbmc/linux/drivers/watchdog/qcom-wdt.c (revision 3a35093a)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /* Copyright (c) 2014, The Linux Foundation. All rights reserved.
3  */
4 #include <linux/bits.h>
5 #include <linux/clk.h>
6 #include <linux/delay.h>
7 #include <linux/interrupt.h>
8 #include <linux/io.h>
9 #include <linux/kernel.h>
10 #include <linux/module.h>
11 #include <linux/of.h>
12 #include <linux/platform_device.h>
13 #include <linux/watchdog.h>
14 #include <linux/of_device.h>
15 
16 enum wdt_reg {
17 	WDT_RST,
18 	WDT_EN,
19 	WDT_STS,
20 	WDT_BARK_TIME,
21 	WDT_BITE_TIME,
22 };
23 
24 #define QCOM_WDT_ENABLE		BIT(0)
25 #define QCOM_WDT_ENABLE_IRQ	BIT(1)
26 
27 static const u32 reg_offset_data_apcs_tmr[] = {
28 	[WDT_RST] = 0x38,
29 	[WDT_EN] = 0x40,
30 	[WDT_STS] = 0x44,
31 	[WDT_BARK_TIME] = 0x4C,
32 	[WDT_BITE_TIME] = 0x5C,
33 };
34 
35 static const u32 reg_offset_data_kpss[] = {
36 	[WDT_RST] = 0x4,
37 	[WDT_EN] = 0x8,
38 	[WDT_STS] = 0xC,
39 	[WDT_BARK_TIME] = 0x10,
40 	[WDT_BITE_TIME] = 0x14,
41 };
42 
43 struct qcom_wdt_match_data {
44 	const u32 *offset;
45 	bool pretimeout;
46 };
47 
48 struct qcom_wdt {
49 	struct watchdog_device	wdd;
50 	unsigned long		rate;
51 	void __iomem		*base;
52 	const u32		*layout;
53 };
54 
55 static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg)
56 {
57 	return wdt->base + wdt->layout[reg];
58 }
59 
60 static inline
61 struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
62 {
63 	return container_of(wdd, struct qcom_wdt, wdd);
64 }
65 
66 static inline int qcom_get_enable(struct watchdog_device *wdd)
67 {
68 	int enable = QCOM_WDT_ENABLE;
69 
70 	if (wdd->pretimeout)
71 		enable |= QCOM_WDT_ENABLE_IRQ;
72 
73 	return enable;
74 }
75 
76 static irqreturn_t qcom_wdt_isr(int irq, void *arg)
77 {
78 	struct watchdog_device *wdd = arg;
79 
80 	watchdog_notify_pretimeout(wdd);
81 
82 	return IRQ_HANDLED;
83 }
84 
85 static int qcom_wdt_start(struct watchdog_device *wdd)
86 {
87 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
88 	unsigned int bark = wdd->timeout - wdd->pretimeout;
89 
90 	writel(0, wdt_addr(wdt, WDT_EN));
91 	writel(1, wdt_addr(wdt, WDT_RST));
92 	writel(bark * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME));
93 	writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME));
94 	writel(qcom_get_enable(wdd), wdt_addr(wdt, WDT_EN));
95 	return 0;
96 }
97 
98 static int qcom_wdt_stop(struct watchdog_device *wdd)
99 {
100 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
101 
102 	writel(0, wdt_addr(wdt, WDT_EN));
103 	return 0;
104 }
105 
106 static int qcom_wdt_ping(struct watchdog_device *wdd)
107 {
108 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
109 
110 	writel(1, wdt_addr(wdt, WDT_RST));
111 	return 0;
112 }
113 
114 static int qcom_wdt_set_timeout(struct watchdog_device *wdd,
115 				unsigned int timeout)
116 {
117 	wdd->timeout = timeout;
118 	return qcom_wdt_start(wdd);
119 }
120 
121 static int qcom_wdt_set_pretimeout(struct watchdog_device *wdd,
122 				   unsigned int timeout)
123 {
124 	wdd->pretimeout = timeout;
125 	return qcom_wdt_start(wdd);
126 }
127 
128 static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
129 			    void *data)
130 {
131 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
132 	u32 timeout;
133 
134 	/*
135 	 * Trigger watchdog bite:
136 	 *    Setup BITE_TIME to be 128ms, and enable WDT.
137 	 */
138 	timeout = 128 * wdt->rate / 1000;
139 
140 	writel(0, wdt_addr(wdt, WDT_EN));
141 	writel(1, wdt_addr(wdt, WDT_RST));
142 	writel(timeout, wdt_addr(wdt, WDT_BARK_TIME));
143 	writel(timeout, wdt_addr(wdt, WDT_BITE_TIME));
144 	writel(QCOM_WDT_ENABLE, wdt_addr(wdt, WDT_EN));
145 
146 	/*
147 	 * Actually make sure the above sequence hits hardware before sleeping.
148 	 */
149 	wmb();
150 
151 	mdelay(150);
152 	return 0;
153 }
154 
155 static int qcom_wdt_is_running(struct watchdog_device *wdd)
156 {
157 	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
158 
159 	return (readl(wdt_addr(wdt, WDT_EN)) & QCOM_WDT_ENABLE);
160 }
161 
162 static const struct watchdog_ops qcom_wdt_ops = {
163 	.start		= qcom_wdt_start,
164 	.stop		= qcom_wdt_stop,
165 	.ping		= qcom_wdt_ping,
166 	.set_timeout	= qcom_wdt_set_timeout,
167 	.set_pretimeout	= qcom_wdt_set_pretimeout,
168 	.restart        = qcom_wdt_restart,
169 	.owner		= THIS_MODULE,
170 };
171 
172 static const struct watchdog_info qcom_wdt_info = {
173 	.options	= WDIOF_KEEPALIVEPING
174 			| WDIOF_MAGICCLOSE
175 			| WDIOF_SETTIMEOUT
176 			| WDIOF_CARDRESET,
177 	.identity	= KBUILD_MODNAME,
178 };
179 
180 static const struct watchdog_info qcom_wdt_pt_info = {
181 	.options	= WDIOF_KEEPALIVEPING
182 			| WDIOF_MAGICCLOSE
183 			| WDIOF_SETTIMEOUT
184 			| WDIOF_PRETIMEOUT
185 			| WDIOF_CARDRESET,
186 	.identity	= KBUILD_MODNAME,
187 };
188 
189 static void qcom_clk_disable_unprepare(void *data)
190 {
191 	clk_disable_unprepare(data);
192 }
193 
194 static const struct qcom_wdt_match_data match_data_apcs_tmr = {
195 	.offset = reg_offset_data_apcs_tmr,
196 	.pretimeout = false,
197 };
198 
199 static const struct qcom_wdt_match_data match_data_kpss = {
200 	.offset = reg_offset_data_kpss,
201 	.pretimeout = true,
202 };
203 
204 static int qcom_wdt_probe(struct platform_device *pdev)
205 {
206 	struct device *dev = &pdev->dev;
207 	struct qcom_wdt *wdt;
208 	struct resource *res;
209 	struct device_node *np = dev->of_node;
210 	const struct qcom_wdt_match_data *data;
211 	u32 percpu_offset;
212 	int irq, ret;
213 	struct clk *clk;
214 
215 	data = of_device_get_match_data(dev);
216 	if (!data) {
217 		dev_err(dev, "Unsupported QCOM WDT module\n");
218 		return -ENODEV;
219 	}
220 
221 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
222 	if (!wdt)
223 		return -ENOMEM;
224 
225 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
226 	if (!res)
227 		return -ENOMEM;
228 
229 	/* We use CPU0's DGT for the watchdog */
230 	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
231 		percpu_offset = 0;
232 
233 	res->start += percpu_offset;
234 	res->end += percpu_offset;
235 
236 	wdt->base = devm_ioremap_resource(dev, res);
237 	if (IS_ERR(wdt->base))
238 		return PTR_ERR(wdt->base);
239 
240 	clk = devm_clk_get(dev, NULL);
241 	if (IS_ERR(clk)) {
242 		dev_err(dev, "failed to get input clock\n");
243 		return PTR_ERR(clk);
244 	}
245 
246 	ret = clk_prepare_enable(clk);
247 	if (ret) {
248 		dev_err(dev, "failed to setup clock\n");
249 		return ret;
250 	}
251 	ret = devm_add_action_or_reset(dev, qcom_clk_disable_unprepare, clk);
252 	if (ret)
253 		return ret;
254 
255 	/*
256 	 * We use the clock rate to calculate the max timeout, so ensure it's
257 	 * not zero to avoid a divide-by-zero exception.
258 	 *
259 	 * WATCHDOG_CORE assumes units of seconds, if the WDT is clocked such
260 	 * that it would bite before a second elapses it's usefulness is
261 	 * limited.  Bail if this is the case.
262 	 */
263 	wdt->rate = clk_get_rate(clk);
264 	if (wdt->rate == 0 ||
265 	    wdt->rate > 0x10000000U) {
266 		dev_err(dev, "invalid clock rate\n");
267 		return -EINVAL;
268 	}
269 
270 	/* check if there is pretimeout support */
271 	irq = platform_get_irq_optional(pdev, 0);
272 	if (data->pretimeout && irq > 0) {
273 		ret = devm_request_irq(dev, irq, qcom_wdt_isr, 0,
274 				       "wdt_bark", &wdt->wdd);
275 		if (ret)
276 			return ret;
277 
278 		wdt->wdd.info = &qcom_wdt_pt_info;
279 		wdt->wdd.pretimeout = 1;
280 	} else {
281 		if (irq == -EPROBE_DEFER)
282 			return -EPROBE_DEFER;
283 
284 		wdt->wdd.info = &qcom_wdt_info;
285 	}
286 
287 	wdt->wdd.ops = &qcom_wdt_ops;
288 	wdt->wdd.min_timeout = 1;
289 	wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
290 	wdt->wdd.parent = dev;
291 	wdt->layout = data->offset;
292 
293 	if (readl(wdt_addr(wdt, WDT_STS)) & 1)
294 		wdt->wdd.bootstatus = WDIOF_CARDRESET;
295 
296 	/*
297 	 * If 'timeout-sec' unspecified in devicetree, assume a 30 second
298 	 * default, unless the max timeout is less than 30 seconds, then use
299 	 * the max instead.
300 	 */
301 	wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U);
302 	watchdog_init_timeout(&wdt->wdd, 0, dev);
303 
304 	/*
305 	 * If WDT is already running, call WDT start which
306 	 * will stop the WDT, set timeouts as bootloader
307 	 * might use different ones and set running bit
308 	 * to inform the WDT subsystem to ping the WDT
309 	 */
310 	if (qcom_wdt_is_running(&wdt->wdd)) {
311 		qcom_wdt_start(&wdt->wdd);
312 		set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
313 	}
314 
315 	ret = devm_watchdog_register_device(dev, &wdt->wdd);
316 	if (ret)
317 		return ret;
318 
319 	platform_set_drvdata(pdev, wdt);
320 	return 0;
321 }
322 
323 static int __maybe_unused qcom_wdt_suspend(struct device *dev)
324 {
325 	struct qcom_wdt *wdt = dev_get_drvdata(dev);
326 
327 	if (watchdog_active(&wdt->wdd))
328 		qcom_wdt_stop(&wdt->wdd);
329 
330 	return 0;
331 }
332 
333 static int __maybe_unused qcom_wdt_resume(struct device *dev)
334 {
335 	struct qcom_wdt *wdt = dev_get_drvdata(dev);
336 
337 	if (watchdog_active(&wdt->wdd))
338 		qcom_wdt_start(&wdt->wdd);
339 
340 	return 0;
341 }
342 
343 static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume);
344 
345 static const struct of_device_id qcom_wdt_of_table[] = {
346 	{ .compatible = "qcom,kpss-timer", .data = &match_data_apcs_tmr },
347 	{ .compatible = "qcom,scss-timer", .data = &match_data_apcs_tmr },
348 	{ .compatible = "qcom,kpss-wdt", .data = &match_data_kpss },
349 	{ },
350 };
351 MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
352 
353 static struct platform_driver qcom_watchdog_driver = {
354 	.probe	= qcom_wdt_probe,
355 	.driver	= {
356 		.name		= KBUILD_MODNAME,
357 		.of_match_table	= qcom_wdt_of_table,
358 		.pm		= &qcom_wdt_pm_ops,
359 	},
360 };
361 module_platform_driver(qcom_watchdog_driver);
362 
363 MODULE_DESCRIPTION("QCOM KPSS Watchdog Driver");
364 MODULE_LICENSE("GPL v2");
365